An error occurred fetching the project authors.
- 18 Jul, 2014 8 commits
-
-
Russell King authored
Save and report (via the procfs file) the last kernel unaligned fault location. This allows us to trivially inspect where the last fault happened for cases which we don't expect to occur. Since we expect the kernel to generate misalignment faults (due to the networking layer), even when warnings are enabled, we don't log them for the kernel. Tested-by: Tony Lindgren <tony@atomide.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Russell King authored
ARMv6 and greater introduced a new instruction ("bx") which can be used to return from function calls. Recent CPUs perform better when the "bx lr" instruction is used rather than the "mov pc, lr" instruction, and this sequence is strongly recommended to be used by the ARM architecture manual (section A.4.1.1). We provide a new macro "ret" with all its variants for the condition code which will resolve to the appropriate instruction. Rather than doing this piecemeal, and miss some instances, change all the "mov pc" instances to use the new macro, with the exception of the "movs" instruction and the kprobes code. This allows us to detect the "mov pc, lr" case and fix it up - and also gives us the possibility of deploying this for other registers depending on the CPU selection. Reported-by: Will Deacon <will.deacon@arm.com> Tested-by: Stephen Warren <swarren@nvidia.com> # Tegra Jetson TK1 Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> # mioa701_bootresume.S Tested-by: Andrew Lunn <andrew@lunn.ch> # Kirkwood Tested-by: Shawn Guo <shawn.guo@freescale.com> Tested-by: Tony Lindgren <tony@atomide.com> # OMAPs Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com> # Armada XP, 375, 385 Acked-by: Sekhar Nori <nsekhar@ti.com> # DaVinci Acked-by: Christoffer Dall <christoffer.dall@linaro.org> # kvm/hyp Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> # PXA3xx Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> # Xen Tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> # ARMv7M Tested-by: Simon Horman <horms+renesas@verge.net.au> # Shmobile Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Russell King authored
Ensure that platform maintainers check the CPU part number in the right manner: the CPU part number is meaningless without also checking the CPU implement(e|o)r (choose your preferred spelling!) Provide an interface which returns both the implementer and part number together, and update the definitions to include the implementer. Mark the old function as being deprecated... indeed, using the old function with the definitions will now always evaluate as false, so people must update their un-merged code to the new function. While this could be avoided by adding new definitions, we'd also have to create new names for them which would be awkward. Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Krzysztof Kozlowski authored
Building of EXYNOS5420_MCPM with disabled SUSPEND fails: arch/arm/mach-exynos/built-in.o: In function `exynos_mcpm_init': arch/arm/mach-exynos/mcpm-exynos.c:361: undefined reference to `mcpm_loopback' The exynos_mcpm_init() in mcp-exynos.c calls mcpm_loopback() which depends on cpu_suspend function (ARM_CPU_SUSPEND). Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Nicolas Pitre authored
The Chromebook firmware doesn't enable the CCI for the boot cpu, and arguably it shouldn't have to either. Let's have the kernel handle the CCI on its own for the boot CPU the same way it does it for secondary CPUs by using the MCPM loopback. This allows to boot all 8 cores on exynos5420-peach-pit, exynos5800-peach-pi and ARM Chromebook 2. Signed-off-by: Nicolas Pitre <nico@linaro.org> Tested-by: Tushar Behera <tushar.b@samsung.com> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Tested-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Nicolas Pitre authored
This is not strictly needed on TC2 but still a good idea to exercise that code. Signed-off-by: nicolas Pitre <nico@linaro.org> Reviewed-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Nicolas Pitre authored
The kernel already has the responsibility to handle resources such as the CCI when hotplugging CPUs, during the booting of secondary CPUs, and when resuming from suspend/idle. It would be more coherent and less confusing if the CCI for the boot CPU (or cluster) was also initialized by the kernel rather than expecting the firmware/bootloader to do it and only in that case. After all, the kernel has all the necessary code already and the bootloader shouldn't have to care at all. The CCI may be turned on only when the cache is off. Leveraging the CPU suspend code to loop back through the low-level MCPM entry point is all that is needed to properly turn on the CCI from the kernel by using the same code as during secondary boot. Let's provide a generic MCPM loopback function that can be invoked by backend initialization code to set things (CCI or similar) on the boot CPU just as it is done for the other CPUs. Signed-off-by: Nicolas Pitre <nico@linaro.org> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Tested-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Arnd Bergmann authored
After applying patch: "ARM: 8078/1: get rid of hardcoded assumptions about kernel stack size" following build failure happens on iop13xx platform: In file included from include/linux/srcu.h:33:0, from include/linux/notifier.h:15, from include/linux/reboot.h:5, from arch/arm/mach-iop13xx/include/mach/iop13xx.h:6, from arch/arm/mach-iop13xx/include/mach/hardware.h:14, from arch/arm/mach-iop13xx/include/mach/memory.h:4, from arch/arm/include/asm/memory.h:24, from arch/arm/include/asm/page.h:163, from arch/arm/include/asm/thread_info.h:17, from include/linux/thread_info.h:54, from include/asm-generic/preempt.h:4, from arch/arm/include/generated/asm/preempt.h:1, from include/linux/preempt.h:18, from include/linux/spinlock.h:50, from include/linux/seqlock.h:35, from include/linux/time.h:5, from include/uapi/linux/timex.h:56, from include/linux/timex.h:56, from include/linux/sched.h:19, from arch/arm/kernel/asm-offsets.c:13: include/linux/rcupdate.h: In function '__rcu_read_lock': >> include/linux/rcupdate.h:220:2: error: implicit declaration of function 'preempt_disable' [-Werror=implicit-function-declaration] preempt_disable(); The problem here is recursive header inclusion which could be avoided by removing linux/reboot.h from mach/iop13xxx.h. linux/reboot.h in include/mach/iop13xx.h is needed only for enum reboot_mode, so header it could be replaced with a enum declaration. Whatever patch "ARM: 8078/1: get rid of hardcoded assumptions about kernel stack size" does, I think it's good to avoid unnecessary header inclusion here in any case. Reported-by: kbuild test robot <fengguang.wu@intel.com> Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
- 01 Jul, 2014 4 commits
-
-
Andrey Ryabinin authored
Changing kernel stack size on arm is not as simple as it should be: 1) THREAD_SIZE macro doesn't respect PAGE_SIZE and THREAD_SIZE_ORDER 2) stack size is hardcoded in get_thread_info macro This patch fixes it by calculating THREAD_SIZE and thread_info address taking into account PAGE_SIZE and THREAD_SIZE_ORDER. Now changing stack size becomes simply changing THREAD_SIZE_ORDER. Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Russell King authored
As we are now using the C preprocessor, we do not need to use sed to edit constants in this file, and then pass the resulting file through the C preprocessor. Instead, rely solely on the C preprocessor to rewrite TEXT_START and BSS_ADDR. Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Nicolas Pitre authored
All known BE8-capable systems have LE bootloaders, so we need to ensure that the magic number and image start/end values are in little endian format. [ben.dooks@codethink.co.uk: from nico's original email on this subject] [taras.kondratiuk@linaro.org: removed lds.S->lds rule, added target to extra-y] Signed-off-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Taras Kondratiuk <taras.kondratiuk@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Russell King authored
The legacy OMAP DMA API is now deprecated; all remaining users should now convert over ASAP to using the DMA engine API instead of the OMAP private API. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
- 29 Jun, 2014 10 commits
-
-
Linus Torvalds authored
-
git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds authored
Pull ARM fixes from Russell King: "Another round of ARM fixes. The largest change here is the L2 changes to work around problems for the Armada 37x/380 devices, where most of the size comes down to comments rather than code. The other significant fix here is for the ptrace code, to ensure that rewritten syscalls work as intended. This was pointed out by Kees Cook, but Will Deacon reworked the patch to be more elegant. The remainder are fairly trivial changes" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 8087/1: ptrace: reload syscall number after secure_computing() check ARM: 8086/1: Set memblock limit for nommu ARM: 8085/1: sa1100: collie: add top boot mtd partition ARM: 8084/1: sa1100: collie: revert back to cfi_probe ARM: 8080/1: mcpm.h: remove unused variable declaration ARM: 8076/1: mm: add support for HW coherent systems in PL310 cache
-
Randy Dunlap authored
Note that I don't maintain Documentation/ABI/, Documentation/devicetree/, or the language translation files. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Dan Carpenter authored
These days most people use git to send patches so I have added a section about that. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Will Deacon authored
On the syscall tracing path, we call out to secure_computing() to allow seccomp to check the syscall number being attempted. As part of this, a SIGTRAP may be sent to the tracer and the syscall could be re-written by a subsequent SET_SYSCALL ptrace request. Unfortunately, this new syscall is ignored by the current code unless TIF_SYSCALL_TRACE is also set on the current thread. This patch slightly reworks the enter path of the syscall tracing code so that we always reload the syscall number from current_thread_info()->syscall after the potential ptrace traps. Acked-by: Kees Cook <keescook@chromium.org> Tested-by: Kees Cook <keescook@chromium.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Laura Abbott authored
Commit 1c2f87c2 (ARM: 8025/1: Get rid of meminfo) changed find_limits to use memblock_get_current_limit for calculating the max_low pfn. nommu targets never actually set a limit on memblock though which means memblock_get_current_limit will just return the default value. Set the memblock_limit to be the end of DDR to make sure bounds are calculated correctly. Signed-off-by: Laura Abbott <lauraa@codeaurora.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Andrea Adami authored
The CFI mapping is now perfect so we can expose the top block, read only. There isn't much to read, though, just the sharpsl_params values. Signed-off-by: Andrea Adami <andrea.adami@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Andrea Adami authored
Reverts commit d26b17ed ARM: sa1100: collie.c: fall back to jedec_probe flash detection Unfortunately the detection was challenged on the defective unit used for tests: one of the NOR chips did not respond to the CFI query. Moreover that bad device needed extra delays on erase-suspend/resume cycles. Tested personally on 3 different units and with feedback of two other users. Signed-off-by: Andrea Adami <andrea.adami@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Nicolas Pitre authored
The sync_phys variable has been replaced by link time computation in mcpm_head.S before the code was submitted upstream. Signed-off-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Thomas Petazzoni authored
When a PL310 cache is used on a system that provides hardware coherency, the outer cache sync operation is useless, and can be skipped. Moreover, on some systems, it is harmful as it causes deadlocks between the Marvell coherency mechanism, the Marvell PCIe controller and the Cortex-A9. To avoid this, this commit introduces a new Device Tree property 'arm,io-coherent' for the L2 cache controller node, valid only for the PL310 cache. It identifies the usage of the PL310 cache in an I/O coherent configuration. Internally, it makes the driver disable the outer cache sync operation. Note that technically speaking, a fully coherent system wouldn't require any of the other .outer_cache operations. However, in practice, when booting secondary CPUs, these are not yet coherent, and therefore a set of cache maintenance operations are necessary at this point. This explains why we keep the other .outer_cache operations and only ->sync is disabled. While in theory any write to a PL310 register could cause the deadlock, in practice, disabling ->sync is sufficient to workaround the deadlock, since the other cache maintenance operations are only used in very specific situations. Contrary to previous versions of this patch, this new version does not simply NULL-ify the ->sync member, because the l2c_init_data structures are now 'const' and therefore cannot be modified, which is a good thing. Therefore, this patch introduces a separate l2c_init_data instance, called of_l2c310_coherent_data. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
- 28 Jun, 2014 15 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spiLinus Torvalds authored
Pull spi fixes from Mark Brown: "A few driver specific fixes, the biggest one being a fix for the newly added Qualcomm SPI controller driver to make it not use its internal chip select due to hardware bugs, replacing it with GPIOs" * tag 'spi-v3.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: qup: Remove chip select function spi: qup: Fix order of spi_register_master spi: sh-sci: fix use-after-free in sh_sci_spi_remove() spi/pxa2xx: fix incorrect SW mode chipselect setting for BayTrail LPSS SPI
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulatorLinus Torvalds authored
Pull regulator fixes from Mark Brown: "Several driver specific fixes here, the palmas fixes being especially important for a range of boards - the recent updates to support new devices have introduced several regressions" * tag 'regulator-v3.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: tps65218: Correct the the config register for LDO1 regulator: tps65218: Add the missing of_node assignment in probe regulator: palmas: fix typo in enable_reg calculation regulator: bcm590xx: fix vbus name regulator: palmas: Fix SMPS enable/disable/is_enabled
-
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds authored
Pull SCSI target fixes from Nicholas Bellinger: "Mostly minor fixes this time around. The highlights include: - iscsi-target CHAP authentication fixes to enforce explicit key values (Tejas Vaykole + rahul.rane) - fix a long-standing OOPs in target-core when a alua configfs attribute is accessed after port symlink has been removed. (Sebastian Herbszt) - fix a v3.10.y iscsi-target regression causing the login reject status class/detail to be ignored (Christoph Vu-Brugier) - fix a v3.10.y iscsi-target regression to avoid rejecting an existing ITT during Data-Out when data-direction is wrong (Santosh Kulkarni + Arshad Hussain) - fix a iscsi-target related shutdown deadlock on UP kernels (Mikulas Patocka) - fix a v3.16-rc1 build issue with vhost-scsi + !CONFIG_NET (MST)" * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: iscsi-target: fix iscsit_del_np deadlock on unload iovec: move memcpy_from/toiovecend to lib/iovec.c iscsi-target: Avoid rejecting incorrect ITT for Data-Out tcm_loop: Fix memory leak in tcm_loop_submission_work error path iscsi-target: Explicily clear login response PDU in exception path target: Fix left-over se_lun->lun_sep pointer OOPs iscsi-target; Enforce 1024 byte maximum for CHAP_C key value iscsi-target: Convert chap_server_compute_md5 to use kstrtoul
-
Mark Brown authored
-
Mark Brown authored
Merge remote-tracking branches 'regulator/fix/bcm590xx', 'regulator/fix/palmas' and 'regulator/fix/tps65218' into regulator-linus
-
Mikulas Patocka authored
On uniprocessor preemptible kernel, target core deadlocks on unload. The following events happen: * iscsit_del_np is called * it calls send_sig(SIGINT, np->np_thread, 1); * the scheduler switches to the np_thread * the np_thread is woken up, it sees that kthread_should_stop() returns false, so it doesn't terminate * the np_thread clears signals with flush_signals(current); and goes back to sleep in iscsit_accept_np * the scheduler switches back to iscsit_del_np * iscsit_del_np calls kthread_stop(np->np_thread); * the np_thread is waiting in iscsit_accept_np and it doesn't respond to kthread_stop The deadlock could be resolved if the administrator sends SIGINT signal to the np_thread with killall -INT iscsi_np The reproducible deadlock was introduced in commit db6077fd, but the thread-stopping code was racy even before. This patch fixes the problem. Using kthread_should_stop to stop the np_thread is unreliable, so we test np_thread_state instead. If np_thread_state equals ISCSI_NP_THREAD_SHUTDOWN, the thread exits. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommuLinus Torvalds authored
Pull IOMMU fixes from Joerg Roedel: - fix VT-d regression with handling multiple RMRR entries per device - fix a small race that was left in the mmu_notifier handling in the AMD IOMMUv2 driver * tag 'iommu-fixes-v3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/amd: Fix small race between invalidate_range_end/start iommu/vt-d: fix bug in handling multiple RMRRs for the same PCI device
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Peter Anvin: "A pile of fixes related to the VDSO, EFI and 32-bit badsys handling. It turns out that removing the section headers from the VDSO breaks gdb, so this puts back most of them. A very simple typo broke rt_sigreturn on some versions of glibc, with obviously disastrous results. The rest is pretty much fixes for the corresponding fallout. The EFI fixes fixes an arithmetic overflow on 32-bit systems and quiets some build warnings. Finally, when invoking an invalid system call number on x86-32, we bypass a bunch of handling, which can make the audit code oops" * 'x86/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi-pstore: Fix an overflow on 32-bit builds x86/vdso: Error out in vdso2c if DT_RELA is present x86/vdso: Move DISABLE_BRANCH_PROFILING into the vdso makefile x86_32, signal: Fix vdso rt_sigreturn x86_32, entry: Do syscall exit work on badsys (CVE-2014-4508) x86/vdso: Create .build-id links for unstripped vdso files x86/vdso: Remove some redundant in-memory section headers x86/vdso: Improve the fake section headers x86/vdso2c: Use better macros for ELF bitness x86/vdso: Discard the __bug_table section efi: Fix compiler warnings (unused, const, type)
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds authored
Pull MIPS fixes from Ralf Baechle: "This is dominated by a large number of changes necessary for the MIPS BPF code. code. Aside of that there are - a fix for the MSC system controller support code. - a Turbochannel fix. - a recordmcount fix that's MIPS-specific. - barrier fixes to smp-cps / pm-cps after unrelated changes elsewhere in the kernel. - revert support for MSA registers in the signal frames. The reverted patch did modify the signal stack frame which of course is inacceptable. - fix math-emu build breakage with older compilers. - some related cleanup. - fix Lasat build error if CONFIG_CRC32 isn't set to y by the user" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (27 commits) MIPS: Lasat: Fix build error if CRC32 is not enabled. TC: Handle device_register() errors. MIPS: MSC: Prevent out-of-bounds writes to MIPS SC ioremap'd region MIPS: bpf: Fix stack space allocation for BPF memwords on MIPS64 MIPS: BPF: Use 32 or 64-bit load instruction to load an address to register MIPS: bpf: Fix PKT_TYPE case for big-endian cores MIPS: BPF: Prevent kernel fall over for >=32bit shifts MIPS: bpf: Drop update_on_xread and always initialize the X register MIPS: bpf: Fix is_range() semantics MIPS: bpf: Use pr_debug instead of pr_warn for unhandled opcodes MIPS: bpf: Fix return values for VLAN_TAG_PRESENT case MIPS: bpf: Use correct mask for VLAN_TAG case MIPS: bpf: Fix branch conditional for BPF_J{GT/GE} cases MIPS: bpf: Add SEEN_SKB to flags when looking for the PKT_TYPE MIPS: bpf: Use 'andi' instead of 'and' for the VLAN cases MIPS: bpf: Return error code if the offset is a negative number MIPS: bpf: Use the LO register to get division's quotient MIPS: mm: uasm: Fix lh micro-assembler instruction MIPS: uasm: Add SLT uasm instruction MIPS: uasm: Add s3s1s2 instruction builder ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arcLinus Torvalds authored
Pull ARC fixes from Vineet Gupta: "Some SMP changes, a ptrace request for NPTL debugging, bunch of build breakages/warnings" * tag 'arc-fixes-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: [SMP] Enable icache coherency ARC: [SMP] Fix IPI IRQ registration ARC: Implement ptrace(PTRACE_GET_THREAD_AREA) ARC: optimize kernel bss clearing in early boot code ARC: Fix build breakage for !CONFIG_ARC_DW2_UNWIND ARC: fix build warning in devtree ARC: remove checks for CONFIG_ARC_MMU_V4
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-coreLinus Torvalds authored
Pull compress bugfix from Greg KH: "Here is another lz4 bugfix for 3.16-rc3 that resolves a reported issue with that compression algorithm" * tag 'compress-3.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: lz4: fix another possible overrun
-
Linus Torvalds authored
Merge tag 'stable/for-linus-3.16-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb Pull swiotlb bugfix from Konrad Rzeszutek Wilk: "One bug-fix that had been in tree for quite some time. We had assumed that the physical address zero was invalid and would fail it. But that is not true and on some architectures it is not reserved and valid. This fixes it" * tag 'stable/for-linus-3.16-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb: swiotlb: don't assume PA 0 is invalid
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "Here includes a few patchset for fixing mostly HD-audio issues in addition to a patch assuring the compress API bytes alignment and a fix for the die-hard existing race condition at USB-audio disconnection. The volume looks big in Realtek HD-audio code, but it's just a translation of the fixup tables, and the actual changes are rather trivial" * tag 'sound-3.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - restore BCLK M/N values when resuming HSW/BDW display controller ALSA: usb-audio: Fix races at disconnection and PCM closing ALSA: hda - Adjust speaker HPF and add LED support for HP Spectre 13 ALSA: hda - Make the pin quirk tables use the SND_HDA_PIN_QUIRK macro ALSA: hda - Make a SND_HDA_PIN_QUIRK macro ALSA: hda - Add pin quirk for Dell XPS 15 ALSA: hda - hdmi: call overridden init on resume ALSA: hda - Fix usage of "model" module parameter ALSA: compress: fix the struct alignment to 4 bytes
-
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfdLinus Torvalds authored
Pull MFD fixes from Lee Jones: "Couple of simple fixes due for the v3.16 -rcs" * tag 'mfd-fixes-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: mfd: ab8500: Fix dt irq mapping mfd: davinci: Voicecodec needs regmap_mmio mfd: STw481x: Allow modular build mfd: UCB1x00: Enable modular build
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Exynos, i915 and msm fixes and one core fix. exynos: hdmi power off and mixer issues msm: iommu, build fixes, i915: regression races and warning fixes" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (22 commits) drm/i915: vlv_prepare_pll is only needed in case of non DSI interfaces drm: fix NULL pointer access by wrong ioctl drm/exynos: enable vsync interrupt while waiting for vblank drm/exynos: soft reset mixer before reconfigure after power-on drm/exynos: allow multiple layer updates per vsync for mixer drm/i915: Hold the table lock whilst walking the file's idr and counting the objects in debugfs drm/i915: BDW: Adding Reserved PCI IDs. drm/i915: Only mark the ctx as initialised after a SET_CONTEXT operation drm/exynos: stop mixer before gating clocks during poweroff drm/exynos: set power state variable after enabling clocks and power drm/exynos: disable unused windows on apply drm/exynos: Fix de-registration ordering drm/exynos: change zero to NULL for sparse drm/exynos: dpi: Fix NULL pointer dereference with legacy bindings drm/exynos: hdmi: fix power order issue drm/i915: default to having backlight if VBT not available drm/i915: cache hw power well enabled state drm/msm: fix IOMMU cleanup for -EPROBE_DEFER drm/msm: use PAGE_ALIGNED instead of IS_ALIGNED(PAGE_SIZE) drm/msm/hdmi: set hdp clock rate before prepare_enable ...
-
- 27 Jun, 2014 3 commits
-
-
Michael S. Tsirkin authored
ERROR: "memcpy_fromiovecend" [drivers/vhost/vhost_scsi.ko] undefined! commit 9f977ef7 vhost-scsi: Include prot_bytes into expected data transfer length in target-pending makes drivers/vhost/scsi.c call memcpy_fromiovecend(). This function is not available when CONFIG_NET is not enabled. socket.h already includes uio.h, so no callers need updating. Reported-by: Randy Dunlap <rdunlap@infradead.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
-
Nicholas Bellinger authored
This patch changes iscsit_check_dataout_hdr() to dump the incoming Data-Out payload when the received ITT is not associated with a WRITE, instead of calling iscsit_reject_cmd() for the non WRITE ITT descriptor. This addresses a bug where an initiator sending an Data-Out for an ITT associated with a READ would end up generating a reject for the READ, eventually resulting in list corruption. Reported-by: Santosh Kulkarni <santosh.kulkarni@calsoftinc.com> Reported-by: Arshad Hussain <arshad.hussain@calsoftinc.com> Cc: stable@vger.kernel.org # 3.10+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
-
Greg Kroah-Hartman authored
There is one other possible overrun in the lz4 code as implemented by Linux at this point in time (which differs from the upstream lz4 codebase, but will get synced at in a future kernel release.) As pointed out by Don, we also need to check the overflow in the data itself. While we are at it, replace the odd error return value with just a "simple" -1 value as the return value is never used for anything other than a basic "did this work or not" check. Reported-by: "Don A. Bailey" <donb@securitymouse.com> Reported-by: Willy Tarreau <w@1wt.eu> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-