- 21 Mar, 2016 14 commits
-
-
Eli Cohen authored
Implement the modify HCA vport commands used to modify the parameters of virtual HCA's ports. Signed-off-by:
Eli Cohen <eli@mellanox.com> Reviewed-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
Doug Ledford <dledford@redhat.com>
-
Eli Cohen authored
Add a vf parameter to mlx5_core_query_vport_counter so we can call it to query counters of virtual functions. Also update current users of the API. PFs may call mlx5_core_query_vport_counter with other_vport set to indicate that they are querying a virtual function. The virtual function to be queried is given by the vf parameter. Virtual function numbering is zero based so the first VF is 0 and so on. When a PF queries its own function, the other_vport parameter is cleared. Signed-off-by:
-
Eli Cohen authored
Add ndo operations to the network driver that enables configuring the following operations: ipoib_set_vf_link_state - configure the VF link policy ipoib_get_vf_config - get link state configuration ipoib_set_vf_guid - set a VF port or node GUID ipoib_get_vf_stats - get statistics of a VF Signed-off-by:
-
Eli Cohen authored
Following the practice exercised for network devices which allow the PF net device to configure attributes of its virtual functions, we introduce the following functions to be used by IPoIB which is the network driver implementation for IB devices. ib_set_vf_link_state - set the policy for a VF link. More below. ib_get_vf_config - read configuration information of a VF ib_get_vf_stats - read VF statistics ib_set_vf_guid - set the node or port GUID of a VF Also add an indication in the device cap flags that indicates that this IB devices is based on a virtual function. A VF shares the physical port with the PF and other VFs. When setting the link state we have three options: 1. Auto - in this mode, the virtual port follows the state of the physical port and becomes active only if the physical port's state is active. In all other cases it remains in a Down state. 2. Down - sets the state of the virtual port to Down 3. Up - causes the virtual port to transition into Initialize state if it was not already in this state. A virtualization aware subnet manager can then bring the state of the port into the Active state. Signed-off-by:
-
Eli Cohen authored
Per the ongoing standardisation process, when virtual HCAs are present in a network, traffic is routed based on a destination GID. In order to access the SA we use the well known SA GID. We also add a GRH required boolean field to the port attributes which is used to report to the verbs consumer whether this port is connected to a virtual network. We use this field to realize whether we need to create an address vector with GRH to access the subnet administrator. We clear the port attributes struct before calling the hardware driver to make sure the default remains that GRH is not required. Signed-off-by:
-
Eli Cohen authored
The subnet prefix is a part of the port_info MAD returned and should be available at the ib_port_attr struct. We define it here and provide a default implementation in case the hardware driver does not provide one. The subnet prefix is required when creating the address vector to access the SA in networks where GRH must be used. Signed-off-by:
-
Eli Cohen authored
Fix the condition that dictates when MAD_IFC should be used. According to firmware specifications, MAD_IFC commands must be used only if the ib_virt capability is off. Signed-off-by:
-
Eli Cohen authored
Add two new NLAs to support configuration of Infiniband node or port GUIDs. New applications can choose to use this interface to configure GUIDs with iproute2 with commands such as: ip link set dev ib0 vf 0 node_guid 00:02:c9:03:00:21:6e:70 ip link set dev ib0 vf 0 port_guid 00:02:c9:03:00:21:6e:78 A new ndo, ndo_sef_vf_guid is introduced to notify the net device of the request to change the GUID. Signed-off-by:
-
Leon Romanovsky authored
The old bitwise device_cap_flags variable was limited to u32 which has all bits already defined. In order to overcome it, we converted device_cap_flags variable to be u64 type. Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Reviewed-by:
Matan Barak <matanb@mellanox.com> Signed-off-by:
-
Leon Romanovsky authored
The setting to zero during variable initialization eliminates the need to explicitly set to zero variables and structures. Signed-off-by:
-
Sagi Grimberg authored
Define the necessary hardware structures for the offload arithmetic capabilities and read/cache them on driver load. Signed-off-by:
Sagi Grimberg <sagig@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Leon Romanovsky authored
Device capability function was called similar in all places. It was called twice for every queried parameter, while the difference between calls was in HCA capability mode only. The change proposed unify these calls into one function. Signed-off-by:
-
Leon Romanovsky authored
Add caching of maximum device capability of ATOMIC endian mode. Fixes: f91e6d89 ('net/mlx5_core: Add setting ATOMIC endian mode') Signed-off-by:
-
Dan Carpenter authored
The first argument of WARN_ON() is a condition, so it means the warning message here will just be the name without the ->qp_num information. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by:
-
- 16 Mar, 2016 7 commits
-
-
Doug Ledford authored
-
Faisal Latif authored
During large connection test, there is a crash at wake_up() in the callback as waitq is not yet initialized. Callback can happen before iwpm_wait_complete_req() is called to initialize waitq. To resolve, using signaling semaphore instead of waitq. Signed-off-by:
Mustafa Ismail <mustafa.ismail@intel.com> Reviewed-by:
Tatyana E Nikolova <tatyana.e.nikolova@intel.com> Signed-off-by:
Faisal Latif <faisal.latif@intel.com> Reviewed-by:
Steve Wise <swise@opengridcomputing.com> Tested-by:
-
Steve Wise authored
Now with the new iWARP port mapping service in the iwcm, it is trivial to add cxgb3 support. Signed-off-by:
-
Steve Wise authored
Now that most of the port mapper code been moved to iwcm, we can remove it from iw_cxgb4. Signed-off-by:
-
Faisal Latif authored
Now that most of the port mapper code been moved to iwcm, we can remove it from port mapper service user drivers. Signed-off-by:
-
Faisal Latif authored
moved port mapper related code from drivers into common code Signed-off-by:
-
Doug Ledford authored
-
- 14 Mar, 2016 1 commit
-
-
Doug Ledford authored
-
- 11 Mar, 2016 1 commit
-
-
Christoph Hellwig authored
Trivial conversion to the new RDMA CQ API. Signed-off-by:
Christoph Hellwig <hch@lst.de> Acked-by:
Dominique Martinet <dominique.martinet@cea.fr> Signed-off-by:
-
- 10 Mar, 2016 3 commits
-
-
Maor Gottlieb authored
Each bypass flow steering priority will be split into two priorities: 1. Priority for don't trap rules. 2. Priority for normal rules. When user creates a flow using IB_FLOW_ATTR_FLAGS_DONT_TRAP flag, the driver creates two flow rules, one used for receiving the traffic and the other one for forwarding the packet to continue matching in lower or equal priorities. Signed-off-by:
Maor Gottlieb <maorg@mellanox.com> Reviewed-by:
-
Maor Gottlieb authored
Add support to create flow rule that forward packets to the first flow table in the next priority (next priority could be the first priority in the next namespace or the next priority in the same namespace). This feature could be used for DONT_TRAP rules or rules that only want to mark the packet with flow tag. In order to do it optimally, each flow table has list of all rules that point to this flow table, when a flow table is destroyed/created, we update the list head correspondingly. This kind of rule is created when destination is NULL and action is MLX5_FLOW_CONTEXT_ACTION_FWD_NEXT_PRIO. Signed-off-by:
-
Maor Gottlieb authored
Create an empty flow table in the end of NIC rx namesapce. Adding this flow table simplify the implementation of "forward to next prio" rules. Signed-off-by:
-
- 04 Mar, 2016 6 commits
-
-
Sagi Grimberg authored
If the device support arbitrary sg list mapping (device cap IB_DEVICE_SG_GAPS_REG set) we allocate the memory regions with IB_MR_TYPE_SG_GAPS and allow the block layer to pass us gaps by skip setting the queue virt_boundary. Signed-off-by:
-
Sagi Grimberg authored
Allocate proper context for arbitrary scatterlist registration If ib_alloc_mr is called with IB_MR_MAP_ARB_SG, the driver allocate a private klm list instead of a private page list. Set the UMR wqe correctly when posting the fast registration. Also, expose device cap IB_DEVICE_MAP_ARB_SG according to the device id (until we have a FW bit that correctly exposes it). Signed-off-by:
-
Sagi Grimberg authored
Devices that are capable in registering SG lists with gaps can now expose it in the core to ULPs using a new device capability IB_DEVICE_SG_GAPS_REG (in a new field device_cap_flags_ex in the device attributes as we ran out of bits), and a new mr_type IB_MR_TYPE_SG_GAPS_REG which allocates a memory region which is capable of handling SG lists with gaps. Signed-off-by:
-
Sagi Grimberg authored
While documentation indicates that the number of translation entries per memory key is unlimited, in practice, we can only fit a finite amount of translation entries in a single registration wqe (which is log_max_klm_list_size). Signed-off-by:
-
Doug Ledford authored
These three related functions can't agree whether to put the umrwr on the stack dirty and then memset it, or to initialize it on the stack. Make them all agree. Signed-off-by: -
Christoph Hellwig authored
Simplifies the code, and makes it more fair vs other users by using a softirq for polling. Signed-off-by:
Haggai Eran <haggaie@mellanox.com> Reviewed-by:
-
- 03 Mar, 2016 8 commits
-
-
Markus Elfring authored
Return the value from a call of the ocrdma_mbx_modify_qp() function without using an extra assignment for the local variable "status". Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> Signed-off-by:
-
Markus Elfring authored
Return zero at the end without using the local variable "status". Signed-off-by:
-
Markus Elfring authored
The variable "status" will be set to an appropriate value a bit later. Thus let us omit the explicit initialisation at the beginning. Signed-off-by:
-
Hal Rosenstock authored
In ib_mad.h, ib_mad_snoop_handler uses send_buf rather than send_wr Signed-off-by:
Hal Rosenstock <hal@mellanox.com> Reviewed-by:
Ira Weiny <ira.weiny@intel.com> Signed-off-by:
-
Parav Pandit authored
1. Replaced printk with appropriate pr_warn, pr_err, pr_info. 2. Removed unnecessary prints around memory allocation failure which are not required, as reported by the checkpatch script. Signed-off-by:
Parav Pandit <pandit.parav@gmail.com> Reviewed-by:
-
Amitoj Kaur Chawla authored
Use eth_zero_addr to assign the zero address to the given address array instead of memset when second argument is address of zero. The Coccinelle semantic patch used to make this change is as follows: // <smpl> @eth_zero_addr@ expression e; @@ -memset(e,0x00,ETH_ALEN); +eth_zero_addr(e); // </smpl> Signed-off-by:
Amitoj Kaur Chawla <amitoj1606@gmail.com> Signed-off-by:
-
Eli Cohen authored
Since we allow to call legacy verbs using their extended counterpart, the check on ucontext has to move up to a common area in case this verb is ever extended. Signed-off-by:
-
Eli Cohen authored
When an extended verb is an extension to a legacy verb, the original functionality is preserved. Hence we do not require each hardware driver to set the extended capability. This will allow the use of the extended verb in its simple form with drivers that do not support the extended capability. Signed-off-by:
-
