- 10 Oct, 2007 40 commits
-
-
Vlad Yasevich authored
This patch implements the internals operations of the AUTH, such as key computation and storage. It also adds necessary variables to the SCTP data structures. Signed-off-by:
Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vlad Yasevich authored
Signed-off-by:
-
David L Stevens authored
Background: RFC 4293 deprecates existing individual, named ICMP type counters to be replaced with the ICMPMsgStatsTable. This table includes entries for both IPv4 and IPv6, and requires counting of all ICMP types, whether or not the machine implements the type. These patches "remove" (but not really) the existing counters, and replace them with the ICMPMsgStats tables for v4 and v6. It includes the named counters in the /proc places they were, but gets the values for them from the new tables. It also counts packets generated from raw socket output (e.g., OutEchoes, MLD queries, RA's from radvd, etc). Changes: 1) create icmpmsg_statistics mib 2) create icmpv6msg_statistics mib 3) modify existing counters to use these 4) modify /proc/net/snmp to add "IcmpMsg" with all ICMP types listed by number for easy SNMP parsing 5) modify /proc/net/snmp printing for "Icmp" to get the named data from new counters. Signed-off-by:David L Stevens <dlstevens@us.ibm.com> Signed-off-by:
-
David L Stevens authored
Background: RFC 4293 deprecates existing individual, named ICMP type counters to be replaced with the ICMPMsgStatsTable. This table includes entries for both IPv4 and IPv6, and requires counting of all ICMP types, whether or not the machine implements the type. These patches "remove" (but not really) the existing counters, and replace them with the ICMPMsgStats tables for v4 and v6. It includes the named counters in the /proc places they were, but gets the values for them from the new tables. It also counts packets generated from raw socket output (e.g., OutEchoes, MLD queries, RA's from radvd, etc). Changes: 1) create icmpmsg_statistics mib 2) create icmpv6msg_statistics mib 3) modify existing counters to use these 4) modify /proc/net/snmp to add "IcmpMsg" with all ICMP types listed by number for easy SNMP parsing 5) modify /proc/net/snmp printing for "Icmp" to get the named data from new counters. [new to 2nd revision] 6) support per-interface ICMP stats 7) use common macro for per-device stat macros Signed-off-by: -
Denis Cheng authored
Signed-off-by:Denis Cheng <crquan@gmail.com>
-
Denis Cheng authored
Signed-off-by:
-
Denis Cheng authored
with the macro max provided by <linux/kernel.h>, so changed its name to a more proper one: limit Signed-off-by:
-
Denis Cheng authored
Signed-off-by:
-
Herbert Xu authored
Thanks for noticing the bug where csum_start is not updated when the head room changes. This patch fixes that. It also moves the csum/ip_summed copying into copy_skb_header so that skb_copy_expand gets it too. I've checked its callers and no one should be upset by this. Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Herbert Xu authored
I was looking at Patrick's fix to inet_diag and it occured to me that we're using a pointer argument to return values unnecessarily in netlink_run_queue. Changing it to return the value will allow the compiler to generate better code since the value won't have to be memory-backed. Signed-off-by:
-
Vlad Yasevich authored
The sctp_[rw]mem definitions should really be in protocol.c since that is where they are initialized. This also allows one to build a kernel without sysctl support. Signed-off-by:
-
Vlad Yasevich authored
SCTP Supported Extenions parameter is specified in Section 4.2.7 of the ADD-IP draft (soon to be RFC). The parameter is encoded as: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Parameter Type = 0x8008 | Parameter Length | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | CHUNK TYPE 1 | CHUNK TYPE 2 | CHUNK TYPE 3 | CHUNK TYPE 4 | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | .... | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | CHUNK TYPE N | PAD | PAD | PAD | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ It contains a list of chunks that a particular SCTP extension uses. Current extensions supported are Partial Reliability (FWD-TSN) and ADD-IP (ASCONF and ASCONF-ACK). When implementing new extensions (AUTH, PKT-DROP, etc..), new chunks need to be added to this parameter. Parameter processing would be modified to negotiate support for these new features. Signed-off-by: -
Denis V. Lunev authored
This patch slightly cleanups FIB rules framework. rules_list as a pointer on struct fib_rules_ops is useless. It is always assigned with a static per/subsystem list in IPv4, IPv6 and DecNet. Signed-off-by:
Denis V. Lunev <den@openvz.org> Acked-by:
Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Signed-off-by:
-
Pavel Emelyanov authored
The call_netdev_notifiers routine can successfully be used in the net/core_dev.c itself. This will save 6 lines of code and 62 ;) bytes of .text section. 62 is rather small, but I have one more patch saving ~30 bytes from netns code (sent to Eric), so altogether they can save some more noticeable amount. Signed-off-by:
Pavel Emelyanov <xemul@openvz.org> Signed-off-by:
-
Pavel Emelyanov authored
The dev_name_hash and the dev_index_hash are now booth kmalloc-ed (and each element is properly initialized as usually) so I think it's worth consolidating this code making it look nicer (and saving 28 bytes of .text section ;) ) Signed-off-by:
-
Eric W. Biederman authored
This replaces the void * parameter with a struct net_device * which is what is actually required. Signed-off-by:
Eric W. Biederman <ebiederm@xmission.com> Signed-off-by:
-
Jamal Hadi Salim authored
HARD_TX_LOCK micro is a nice aggregation that could be used in other spots. move it to netdevice.h Also makes sure the previously superflous cpu arguement is used. Thanks to DaveM for the suggestions. Signed-off-by:
Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by:
-
Ed Swierk authored
Signed-off-by: -
Milan Kocian authored
Remove useless message. We get the right message from another subsystem. Signed-off-by:
Milan Kocian <milon@wq.cz> Signed-off-by:
-
Paul Moore authored
The bulk of the CIPSO option parsing/processing in the cipso_v4_sock_getattr() and cipso_v4_skb_getattr() functions are identical, the only real difference being where the functions obtain the CIPSO option itself. This patch creates a new function, cipso_v4_getattr(), which contains the common CIPSO option parsing/processing code and modifies the existing functions to call this new helper function. Signed-off-by:
Paul Moore <paul.moore@hp.com> Signed-off-by:
-
Jeff Garzik authored
For the operations get-tx-csum get-sg get-tso get-ufo the default ethtool_op_xxx behavior is fine for all drivers, so we permit op==NULL to imply the default behavior. This provides a more uniform behavior across all drivers, eliminating ethtool(8) "ioctl not supported" errors on older drivers that had not been updated for the latest sub-ioctls. The ethtool_op_xxx() functions are left exported, in case anyone wishes to call them directly from a driver-private implementation -- a not-uncommon case. Should an ethtool_op_xxx() helper remain unused for a while, except by net/core/ethtool.c, we can un-export it at a later date. [ Resolved conflicts with set/get value ethtool patch... -DaveM ] Signed-off-by:
Jeff Garzik <jeff@garzik.org> Signed-off-by:
-
Jeff Garzik authored
We now have struct net_device_stats embedded in struct net_device, and the default ->get_stats() hook does the obvious thing for us. Run through drivers/net/* and remove the driver-local storage of statistics, and driver-local ->get_stats() hook where applicable. This was just the low-hanging fruit in drivers/net; plenty more drivers remain to be updated. [ Resolved conflicts with napi_struct changes and fix sunqe build regression... -DaveM ] Signed-off-by:
-
Denis Cheng authored
Signed-off-by:
-
Ralf Baechle authored
It's been a useless no-op for long enough in 2.6 so I figured it's time to remove it. The number of people that could object because they're maintaining unified 2.4 and 2.6 drivers is probably rather small. [ Handled drivers added by netdev tree and some missed IRDA cases... -DaveM ] Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Sivakumar Subramani authored
- Code Optimization of s2io_isr function. - Isr check using per device napi variable instead of driver global. - Reduced from 3 to 1 if condition before check for processing packet receive packets. - Implemented Jeff's comment to use synchronize_irq. Removed the isr_cnt variable as it became redundant. - One time de assert the interrupts by writing all F's to the general_int_mask register instead of de asserting by clearing the source of interrupts with multiple writes which causes loss of interrupts (race conditions). It is entirely possible that before the driver has a chance to mask the asserted alarm bit, another alarm/traffic interrupt bit gets asserted as well. In this case Herc will keep the INTA line asserted and the bridge will not send a new Assert_INTA message upstream. [ Resolved conflicts due to napi_struct changes... -DaveM ] Signed-off-by:
Sivakumar Subramani <sivakumar.subramani@neterion.com> Signed-off-by:
Santosh Rastapur <santosh.rastapur@neterion.com> Signed-off-by:
Ramkrishna Vepa <ram.vepa@neterion.com> Signed-off-by:
-
Sivakumar Subramani authored
- Added check to return from the traffic handling function, if the card status is DOWN. - Implemented Jeff's comments on incorrect return value in s2io_poll function. Signed-off-by:
-
Sivakumar Subramani authored
- Removed the unused variable, intr_type, in device private structure. [ Resolve conflicts with napi_struct changes... -DaveM ] Signed-off-by:
-
Sivakumar Subramani authored
- Added support to poll entire set of device errors and alarams. - A note on how device errors and alarms are handled: - The adapter will automatically recover from uncorrectable ECC errors. Packets containing corrupted data will be dropped (not transmitted) or tagged as invalid before being passed to the host. - The adapter cannot recover from any internal state machine errors. A state machine error requires a device reset. - Any internal error that could potentially result in .store trampling. (undesirable PCI behaviour)is tagged as a "serious error". In such cases the adapter will give up its ability to be a bus master. In this situation the host will still be able to read internal device registers in order to generate an error report. A device reset is necessary to return to normal operation. - In the event of a pcix data parity error, the adapter will automatically disable itself. Adapter_En will automatically transition from '1' to '0' and the adapter will enter its clean-up routine. Once the device has achieved quiescence, an adapter reset should be performed. - Replaced alarm_intr_handler() with s2io_handle_errors(). - Added statistic counters to monitor the alarms. [ Fix warnings wrt. do_s2io_chk_alarm_bit(), Callers pass in an "unsigned long long *" but the function takes a "u64 *" which is different on many 64-bit platforms. -DaveM ] Signed-off-by:
-
Sivakumar Subramani authored
- Added support to unmask entire set of device errors and alarams. Alarm interrupts are generated for a myriad of purposes, ranging from illegal operations or requests to internal state machine errors and uncorrectable data corruption errors. In several cases the adapter can recover gracefully from unexpected events; however, in some cases, a device reset may be necessary. This patch handles alarms generated by all the blocks within the device. The adapter generates the following types of alarms: 1. Link state transitions (local/remote fault) or other link-related problems. 2. Problems with any device peripherals, including the EEPROM, FLASH, etc. 3. Correctable ECC errors (single-bit errors) on internal data structures or frame data. 4. Uncorrectable ECC errors (multi-bit errors) on internal data structures or frame data. 5. State machine errors, which indicate that internal control structures have become corrupted. 6. PCI related errors, including parity errors or illegal transactions. 7. Other unexpected events. - Implemented Jeff's review comments to use do_s2io_write_bits function to avoid duplicate codes. Signed-off-by: -
Thomas Bogendoerfer authored
remove setup platform device from jazzsonic, which is done in arch code now Signed-off-by:
Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by:
-
Ralf Baechle authored
The sgiseeq driver is one of the few remaining users of the ancient cache banging DMA API. Replaced with the modern days DMA API. Signed-off-by:
-
Divy Le Ray authored
The new microcode engine version is set to 1.1.0 Signed-off-by:
Divy Le Ray <divy@chelsio.com> Signed-off-by:
-
Divy Le Ray authored
add driver recognition for T3C rev board. Signed-off-by:
-
Divy Le Ray authored
Currently, the driver only tries up to 5 times (5us) to get the results of a CQ context operation. Testing has shown the chip can take as much as 50us to return the response on SG_CONTEXT_CMD operations. So we up the retry count to 100 to cover high loads. Signed-off-by:
-
Divy Le Ray authored
The cxgb3 driver is incorrectly configuring the HW CQ context for CQ's that use overflow-avoidance. Namely the RDMA control CQ. This results in a bad DMA from the device to bus address 0. The solution is to set the CQ_ERR bit in the context for these types of CQs. Signed-off-by:
-
Divy Le Ray authored
Qualify toggling of xgmac tx enable with not getting pause frames, we might not make forward progress because the peer is sending lots of pause frames. Signed-off-by:
-
Divy Le Ray authored
Clear pciE PEX errors late at module load time. Log details when PEX errors occur. Signed-off-by:
-
Divy Le Ray authored
Update firmware version. Allow the driver to be up and running with older FW image Signed-off-by:
-
Stephen Hemminger authored
Since E100 timer is 2HZ, use rounding to make timer occur on the correct boundary. Signed-off-by:
Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by:
Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by:
-
Auke Kok authored
This patch adds support for the Intel 82598 PCI-Express 10GbE chipset. Devices will be available on the market soon. This version of the driver is largely the same as the last release: * Driver uses a single RX and single TX queue, each using 1 MSI-X irq vector. * Driver runs in NAPI mode only * Driver is largely multiqueue-ready (TM) Changes since 20070803: * removed wrappers for hardware functions * incorporated e1000e-style HW api reorganization code * sparse/checkpatch cleanups, namespace cleanups * driver prints out extra debugging information at load time identifying adapter board number, mac, phy types * removed ixgbe_api.c, ixgbe_api.h, ixgbe_osdep.h * driver update to 1.1.18 * removed ixgbe.txt which contained no useful info anymore [ Integrated napi_struct changes from Auke as well... -DaveM ] Signed-off-by:Ayyappan Veeraiyan <ayyappan.veeraiyan@intel.com> Signed-off-by:
-
