- 18 Apr, 2008 6 commits
-
-
Martin Peschke authored
drivers/s390/scsi/zfcp_aux.c: In function ‘zfcp_fsf_incoming_els_rscn’: drivers/s390/scsi/zfcp_aux.c:1379: warning: cast from pointer to integer of different size drivers/s390/scsi/zfcp_aux.c: In function ‘zfcp_fsf_incoming_els_plogi’: drivers/s390/scsi/zfcp_aux.c:1432: warning: cast from pointer to integer of different size drivers/s390/scsi/zfcp_aux.c: In function ‘zfcp_fsf_incoming_els_logo’: drivers/s390/scsi/zfcp_aux.c:1457: warning: cast from pointer to integer of different size .. Just passing pointers rids us of these warnings and improves readability. Signed-off-by:
Martin Peschke <mp3@de.ibm.com> Signed-off-by:
Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by:
James Bottomley <James.Bottomley@HansenPartnership.com>
-
FUJITA Tomonori authored
Before bsg_complete_all_commands is called, BSG_F_BLOCK bit is always set. Signed-off-by:
FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by:
-
FUJITA Tomonori authored
minor in struct bsg_device is used as identifier to find the corresponding struct bsg_device_class. However, request_queuse can be used as identifier for that and the minor in struct bsg_device is unnecessary. Signed-off-by:
-
FUJITA Tomonori authored
This replace hlist_for_each and list_entry with hlist_for_each_entry and list_first_entry respectively. Signed-off-by:
-
FUJITA Tomonori authored
Both takes a ref to a queue. But blk_get_queue checks QUEUE_FLAG_DEAD and is more appropriate interface here. Signed-off-by:
-
FUJITA Tomonori authored
bsg_register_queue() takes a ref to struct device that a caller passes. For example, bsg takes a ref to the sdev_gendev for scsi devices. However, bsg doesn't inrease the refcount in fops->open. So while an application opens a bsg device, the scsi device that the bsg device holds can go away (bsg also takes a ref to a queue, but it doesn't prevent the device from going away). With this patch, bsg increases the refcount of struct device in fops->open and decreases it in fops->release. Signed-off-by:
-
- 17 Apr, 2008 3 commits
-
-
Adrian Bunk authored
There's no point for an in-kernel driver to check whether it's compiled under kernel < 2.6.0 . Signed-off-by:
Adrian Bunk <bunk@kernel.org> Cc: Jes Sorensen <jes@sgi.com> Signed-off-by:
-
Al Viro authored
Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Martin Peschke authored
as seen in linux-next tree: drivers/s390/scsi/zfcp_dbf.c: In function ‘zfcp_rec_dbf_event_thread’: drivers/s390/scsi/zfcp_dbf.c:697: warning: passing argument 1 of ‘atomic_read’ from incompatible pointer type Caused by recent git commit: commit 348447e8 Author: Martin Peschke <mp3@de.ibm.com> Date: Thu Mar 27 14:22:01 2008 +0100 [SCSI] zfcp: Add trace records for recovery thread and its queues We are not supposed to poke inside semaphore. Signed-off-by:
-
- 16 Apr, 2008 5 commits
-
-
Paul Bolle authored
Describe check_reset parameter with its name (and not its value) Signed-off-by:
Paul Bolle <pebolle@tiscali.nl> Acked-by:
Mark Salyzyn <Mark_Salyzyn@adaptec.com> Signed-off-by:
-
Mark Salyzyn authored
Instead of ignoring the return value in aac_fib_send() return 2 to indicate to the layers above that fib transmission was aborted due to timeout. Signed-off-by:
Mark Salyzyn <aacraid@adaptec.com> Signed-off-by:
-
Adrian Bunk authored
This patch adds the missing MODULE_LICENSE("GPL"). Signed-off-by: -
Adrian Bunk authored
This patch fixes the following namespace collision with include/asm-avr32/cacheflush.h : <-- snip --> ... CC [M] drivers/scsi/st.o /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/scsi/st.c:629:53: error: macro "flush_write_buffer" passed 1 arguments, but takes just 0 ... make[3]: *** [drivers/scsi/st.o] Error 1 <-- snip --> st now uses st_flush_write_buffer() Signed-off-by:
-
FUJITA Tomonori authored
This uses new KMEM_CACHE() macro instead of kmem_cache_create directly to simplify slab cache creation. Signed-off-by:
-
- 11 Apr, 2008 1 commit
-
-
Grant Grundler authored
Most of the cpu_to_le32() usage was wrong in one way or another. Compiler warning on BE builds was just the tip of the iceberg. This patch attempts to make this driver work on BE though I don't have the HW to test it. Signed-off-by:
Grant Grundler <grundler@parisc-linux.org> Signed-off-by:
-
- 10 Apr, 2008 4 commits
-
-
James Smart authored
Update lpfc driver version to 8.2.6 Signed-off-by:
James Smart <james.smart@emulex.com> Signed-off-by:
-
James Smart authored
Miscellaneous Fixes - Allow WRITE_VPARAM command when the virtual port is in a stopped state - Fixed handling of our queue depth max that was unconditionally raising the depth on all vports, rather than just the vport affected. - Fix race in interrupt handler for mailbox processing that did not take out the host lock. - Removed unused functions: find_node, findnode_rpi, and fabric_abort_flogi - Correct misspelled word unsolicited in message 0146 - Correct HW-error 5 handling - it should not reset the adapter - Correct handling of IOCBs, which did not null out our pCmd field before invoking the midlayer io done function. - Changed our maximum supported target id to 4096 Signed-off-by:
-
James Smart authored
PCI Parity and EEH handling Fixes: - Under a PCI Data Parity Error, remove a completion routine callback that was on a command that we had already failed and released. - Under PCI parity error, we were not reinstalling the interrupt handler in the slot_reset callback, so we never became functional again. Signed-off-by:
-
James Smart authored
Multiple Discovery Fixes: - Fix race on discovery due to link events coinciding with vport_delete. - Use NLP_FABRIC state to filter out switch-based pseudo initiators that reuse the same WWNs. - Correct erroneous setting of DID=0 in lpfc_matchdid() - Correct extra reference count that was in the lookup path for the remoteid from an unsolicited ELS. - Correct double-free bug in els abort path. - Correct FDMI server discovery logic for switch that return a WWN of 0. - Fix bugs in ndlp mgmt when a node changes address - Correct bug that did not delete RSCNs for vports upon link transitions - Fix "0216 Link event during NS query" error which pops up when vports are swapped to different switch ports. - Add sanity checks on ndlp structures - Fix devloss log message to dump WWN correctly - Hold off mgmt commands that were interferring with discovery mailbox cmds - Remove unnecessary FC_ESTABLISH_LINK logic. - Correct some race conditions in the worker thread, resulting in devloss: - Clear the work_port_events field before handling the work port events - Clear the deferred ring event before handling a deferred ring event - Hold the hba lock when waking up the work thread - Send an acc for the rscn even when we aren't going to handle it - Fix locking behavior that was not properly protecting the ACTIVE flag, thus allowing mailbox command order to shift. Signed-off-by:
-
- 07 Apr, 2008 21 commits
-
-
Andrew Vasquez authored
Signed-off-by:
Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by:
-
Seokmann Ju authored
Upon having configuration changes on vports only, the driver handles SCR regardless physical port state and, in turn, it results mailbox error as below: Mar 20 11:24:20 dl585 kernel: qla2x00_mailbox_command(9): **** FAILED. mbx0=4005, mbx1=1, mbx2=8100, cmd=70 **** With the changes, driver checks physical port loop_state and make sure the port is ready to take commands. Signed-off-by:
Seokmann Ju <seokmann.ju@qlogic.com> Signed-off-by:
-
Seokmann Ju authored
Changes are added to the driver so that it can behave properly upon having asynchronous events, for example, addition of target devices to the VPs. Signed-off-by:
-
Seokmann Ju authored
As there is no actual cable connection on vports, made change so that the driver checks DFLG_NO_CABLE against ha->device_flags only for physical port. Signed-off-by:
-
Seokmann Ju authored
There were several places where referencing ha structure of virtual ports for resources. Among those refereces, certain fields are get up-to-dated only on ha structure of physical port. Signed-off-by:
-
Andrew Vasquez authored
The member is not needed as there's no non-scatter-gather list I/Os submitted by the upper-layers. Signed-off-by:
-
Harihara Kadayam authored
Signed-off-by:
Ravi Anand <ravi.anand@qlogic.com> Additional cleanups and Signed-off-by:
-
Ravi Anand authored
Signed-off-by:
-
Andrew Vasquez authored
Now that infrastructure is present within the midlayer and there is a clear distinction between what is expected from a device and target reset, convert the current device-reset codes to a target-reset, and add codes to perform a proper device-reset (LUN reset). In the process of adding reset support, collapse and consolidate large sections of mailbox-command (TMF issuance) codes, generalize the two 'wait-for-commands-to-complete' functions, and add a generic-reset routine for use by midlayer reset functions. Signed-off-by:
-
Andrew Vasquez authored
Some switches return 0x09 (Command not supported) as the reason code for GPSC failure. Check for this code, and disable additional GPSC queries if found. Signed-off-by:
-
Andrew Vasquez authored
The Flash Descriptor Table (FDT) present on many recent HBAs encodes flash accessing characteristics of the flash-part used on the HBA. Use this information during flash manipulation (writes) rather than using specific hard-coded values based on queried manufacturer and device IDs. Signed-off-by:
-
Andrew Vasquez authored
Signed-off-by:
-
Andrew Vasquez authored
Strip unused (DEBUG-ONLY) enabled functions, inlines, useless wrappers, and unused DPC flags from the code. Another step in the migration towards a cleaner (less-crusty) driver. Signed-off-by:
-
Andrew Vasquez authored
Recent ISPs have a region within FLASH which acts as a repository for the logging of serious hardware and software failures. Currently, the region is large enough to support up to 255 entries. Signed-off-by:
-
Andrew Vasquez authored
Supported events include LIP, LIP reset, RSCN, link up, and link down. To support AEN (and additional forthcoming features), we also introduce a simple deferred-work construct to manage events which require a non-atomic sleeping-capable context. This work-list is processed as part of the driver's standard DPC routine. Signed-off-by:
-
Andrew Vasquez authored
There's no need to use the heavier (albiet safer) *_irq[save|restore]() locking primitives within the driver's interrupt handlers, interrupts are guaranteed to be non-reentrant. Use lightweight spin_lock() and spin_unlock() primitives while acquiring the hardware_lock. Signed-off-by:
-
Andrew Vasquez authored
Rather than using a duplicate/cached value stored in the driver's internal fcport structure. Signed-off-by:
-
Andrew Vasquez authored
Signed-off-by:
-
Andrew Vasquez authored
Use generic FC transport #defines for speed values. Signed-off-by:
-
Andrew Vasquez authored
Signed-off-by:
-
Andrew Vasquez authored
Signed-off-by:
-
