- 07 Jun, 2013 40 commits
-
-
Zhang Yanfei authored
commit e9d0626e upstream. In head_64.S, a switchover has been used to handle kernel crossing 1G, 512G boundaries. And commit 8170e6be x86, 64bit: Use a #PF handler to materialize early mappings on demand said: During the switchover in head_64.S, before #PF handler is available, we use three pages to handle kernel crossing 1G, 512G boundaries with sharing page by playing games with page aliasing: the same page is mapped twice in the higher-level tables with appropriate wraparound. But from the switchover code, when we set up the PUD table: 114 addq $4096, %rdx 115 movq %rdi, %rax 116 shrq $PUD_SHIFT, %rax 117 andl $(PTRS_PER_PUD-1), %eax 118 movq %rdx, (4096+0)(%rbx,%rax,8) 119 movq %rdx, (4096+8)(%rbx,%rax,8) It seems line 119 has a potential bug there. For example, if the kernel is loaded at physical address 511G+1008M, that is 000000000 111111111 111111000 000000000000000000000 and the kernel _end is 512G+2M, that is 000000001 000000000 000000001 000000000000000000000 So in this example, when using the 2nd page to setup PUD (line 114~119), rax is 511. In line 118, we put rdx which is the address of the PMD page (the 3rd page) into entry 511 of the PUD table. But in line 119, the entry we calculate from (4096+8)(%rbx,%rax,8) has exceeded the PUD page. IMO, the entry in line 119 should be wraparound into entry 0 of the PUD table. The patch fixes the bug. Signed-off-by:
Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Link: http://lkml.kernel.org/r/5191DE5A.3020302@cn.fujitsu.comSigned-off-by:
Yinghai Lu <yinghai@kernel.org> Signed-off-by:
H. Peter Anvin <hpa@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Pekka Riikonen authored
commit 5187b28f upstream. With the addition of eagerfpu the irq_fpu_usable() now returns false negatives especially in the case of ksoftirqd and interrupted idle task, two common cases for FPU use for example in networking/crypto. With eagerfpu=off FPU use is possible in those contexts. This is because of the eagerfpu check in interrupted_kernel_fpu_idle(): ... * For now, with eagerfpu we will return interrupted kernel FPU * state as not-idle. TBD: Ideally we can change the return value * to something like __thread_has_fpu(current). But we need to * be careful of doing __thread_clear_has_fpu() before saving * the FPU etc for supporting nested uses etc. For now, take * the simple route! ... if (use_eager_fpu()) return 0; As eagerfpu is automatically "on" on those CPUs that also have the features like AES-NI this patch changes the eagerfpu check to return 1 in case the kernel_fpu_begin() has not been said yet. Once it has been the __thread_has_fpu() will start returning 0. Notice that with eagerfpu the __thread_has_fpu is always true initially. FPU use is thus always possible no matter what task is under us, unless the state has already been saved with kernel_fpu_begin(). [ hpa: this is a performance regression, not a correctness regression, but since it can be quite serious on CPUs which need encryption at interrupt time I am marking this for urgent/stable. ] Signed-off-by:
Pekka Riikonen <priikone@iki.fi> Link: http://lkml.kernel.org/r/alpine.GSO.2.00.1305131356320.18@git.silcnet.orgSigned-off-by:
-
wenxiong@linux.vnet.ibm.com authored
commit 96b04db9 upstream. Add reset adapter after the 6th EEH errors in ipr driver. This triggers the adapter reset via the PCI config space even when the slot is frozen. Signed-off-by:
Wen Xiong <wenxiong@linux.vnet.ibm.com> Acked-by:
Brian King <brking@linux.vnet.ibm.com> Signed-off-by:
James Bottomley <JBottomley@Parallels.com> Signed-off-by:
-
Aneesh Kumar K.V authored
commit 7c342512 upstream. We should not use set_pmd_at to update pmd_t with pgtable_t pointer. set_pmd_at is used to set pmd with huge pte entries and architectures like ppc64, clear few flags from the pte when saving a new entry. Without this change we observe bad pte errors like below on ppc64 with THP enabled. BUG: Bad page map in process ld mm=0xc000001ee39f4780 pte:7fc3f37848000001 pmd:c000001ec0000000 Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Hugh Dickins <hughd@google.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Reviewed-by:
Andrea Arcangeli <aarcange@redhat.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Cliff Wickman authored
commit a9ff785e upstream. A panic can be caused by simply cat'ing /proc/<pid>/smaps while an application has a VM_PFNMAP range. It happened in-house when a benchmarker was trying to decipher the memory layout of his program. /proc/<pid>/smaps and similar walks through a user page table should not be looking at VM_PFNMAP areas. Certain tests in walk_page_range() (specifically split_huge_page_pmd()) assume that all the mapped PFN's are backed with page structures. And this is not usually true for VM_PFNMAP areas. This can result in panics on kernel page faults when attempting to address those page structures. There are a half dozen callers of walk_page_range() that walk through a task's entire page table (as N. Horiguchi pointed out). So rather than change all of them, this patch changes just walk_page_range() to ignore VM_PFNMAP areas. The logic of hugetlb_vma() is moved back into walk_page_range(), as we want to test any vma in the range. VM_PFNMAP areas are used by: - graphics memory manager gpu/drm/drm_gem.c - global reference unit sgi-gru/grufile.c - sgi special memory char/mspec.c - and probably several out-of-tree modules [akpm@linux-foundation.org: remove now-unused hugetlb_vma() stub] Signed-off-by:
Cliff Wickman <cpw@sgi.com> Reviewed-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: David Sterba <dsterba@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Signed-off-by:
-
Brian Behlendorf authored
commit dfd20b2b upstream. The index on the page must be set before it is inserted in the radix tree. Otherwise there is a small race which can occur during lookup where the page can be found with the incorrect index. This will trigger the BUG_ON() in brd_lookup_page(). Signed-off-by:
Brian Behlendorf <behlendorf1@llnl.gov> Reported-by:
Chris Wedgwood <cw@f00f.org> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Johannes Weiner authored
commit 28ccddf7 upstream. Commit 0c59b89c ("mm: memcg: push down PageSwapCache check into uncharge entry functions") added a VM_BUG_ON() on PageSwapCache in the uncharge path after checking that page flag once, assuming that the state is stable in all paths, but this is not the case and the condition triggers in user environments. An uncharge after the last page table reference to the page goes away can race with reclaim adding the page to swap cache. Swap cache pages are usually uncharged when they are freed after swapout, from a path that also handles swap usage accounting and memcg lifetime management. However, since the last page table reference is gone and thus no references to the swap slot left, the swap slot will be freed shortly when reclaim attempts to write the page to disk. The whole swap accounting is not even necessary. So while the race condition for which this VM_BUG_ON was added is real and actually existed all along, there are no negative effects. Remove the VM_BUG_ON again. Reported-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Reported-by:
Lingzhu Xiang <lxiang@redhat.com> Signed-off-by:
Johannes Weiner <hannes@cmpxchg.org> Acked-by:
Hugh Dickins <hughd@google.com> Acked-by:
Michal Hocko <mhocko@suse.cz> Signed-off-by:
-
Xiao Guangrong authored
commit d34883d4 upstream. Commit 751efd86 ("mmu_notifier_unregister NULL Pointer deref and multiple ->release()") breaks the fix 3ad3d901 ("mm: mmu_notifier: fix freed page still mapped in secondary MMU"). Since hlist_for_each_entry_rcu() is changed now, we can not revert that patch directly, so this patch reverts the commit and simply fix the bug spotted by that patch This bug spotted by commit 751efd86 is: There is a race condition between mmu_notifier_unregister() and __mmu_notifier_release(). Assume two tasks, one calling mmu_notifier_unregister() as a result of a filp_close() ->flush() callout (task A), and the other calling mmu_notifier_release() from an mmput() (task B). A B t1 srcu_read_lock() t2 if (!hlist_unhashed()) t3 srcu_read_unlock() t4 srcu_read_lock() t5 hlist_del_init_rcu() t6 synchronize_srcu() t7 srcu_read_unlock() t8 hlist_del_rcu() <--- NULL pointer deref. This can be fixed by using hlist_del_init_rcu instead of hlist_del_rcu. The another issue spotted in the commit is "multiple ->release() callouts", we needn't care it too much because it is really rare (e.g, can not happen on kvm since mmu-notify is unregistered after exit_mmap()) and the later call of multiple ->release should be fast since all the pages have already been released by the first call. Anyway, this issue should be fixed in a separate patch. -stable suggestions: Any version that has commit 751efd86 need to be backported. I find the oldest version has this commit is 3.0-stable. [akpm@linux-foundation.org: tweak comments] Signed-off-by:
Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Tested-by:
Robin Holt <holt@sgi.com> Signed-off-by:
-
Ryusuke Konishi authored
commit 136e8770 upstream. nilfs2: fix issue of nilfs_set_page_dirty for page at EOF boundary DESCRIPTION: There are use-cases when NILFS2 file system (formatted with block size lesser than 4 KB) can be remounted in RO mode because of encountering of "broken bmap" issue. The issue was reported by Anthony Doggett <Anthony2486@interfaces.org.uk>: "The machine I've been trialling nilfs on is running Debian Testing, Linux version 3.2.0-4-686-pae (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.35-2), but I've also reproduced it (identically) with Debian Unstable amd64 and Debian Experimental (using the 3.8-trunk kernel). The problematic partitions were formatted with "mkfs.nilfs2 -b 1024 -B 8192"." SYMPTOMS: (1) System log contains error messages likewise: [63102.496756] nilfs_direct_assign: invalid pointer: 0 [63102.496786] NILFS error (device dm-17): nilfs_bmap_assign: broken bmap (inode number=28) [63102.496798] [63102.524403] Remounting filesystem read-only (2) The NILFS2 file system is remounted in RO mode. REPRODUSING PATH: (1) Create volume group with name "unencrypted" by means of vgcreate utility. (2) Run script (prepared by Anthony Doggett <Anthony2486@interfaces.org.uk>): ----------------[BEGIN SCRIPT]-------------------- VG=unencrypted lvcreate --size 2G --name ntest $VG mkfs.nilfs2 -b 1024 -B 8192 /dev/mapper/$VG-ntest mkdir /var/tmp/n mkdir /var/tmp/n/ntest mount /dev/mapper/$VG-ntest /var/tmp/n/ntest mkdir /var/tmp/n/ntest/thedir cd /var/tmp/n/ntest/thedir sleep 2 date darcs init sleep 2 dmesg|tail -n 5 date darcs whatsnew || true date sleep 2 dmesg|tail -n 5 ----------------[END SCRIPT]-------------------- REPRODUCIBILITY: 100% INVESTIGATION: As it was discovered, the issue takes place during segment construction after executing such sequence of user-space operations: open("_darcs/index", O_RDWR|O_CREAT|O_NOCTTY, 0666) = 7 fstat(7, {st_mode=S_IFREG|0644, st_size=0, ...}) = 0 ftruncate(7, 60) The error message "NILFS error (device dm-17): nilfs_bmap_assign: broken bmap (inode number=28)" takes place because of trying to get block number for third block of the file with logical offset #3072 bytes. As it is possible to see from above output, the file has 60 bytes of the whole size. So, it is enough one block (1 KB in size) allocation for the whole file. Trying to operate with several blocks instead of one takes place because of discovering several dirty buffers for this file in nilfs_segctor_scan_file() method. The root cause of this issue is in nilfs_set_page_dirty function which is called just before writing to an mmapped page. When nilfs_page_mkwrite function handles a page at EOF boundary, it fills hole blocks only inside EOF through __block_page_mkwrite(). The __block_page_mkwrite() function calls set_page_dirty() after filling hole blocks, thus nilfs_set_page_dirty function (= a_ops->set_page_dirty) is called. However, the current implementation of nilfs_set_page_dirty() wrongly marks all buffers dirty even for page at EOF boundary. As a result, buffers outside EOF are inconsistently marked dirty and queued for write even though they are not mapped with nilfs_get_block function. FIX: This modifies nilfs_set_page_dirty() not to mark hole blocks dirty. Thanks to Vyacheslav Dubeyko for his effort on analysis and proposals for this issue. Signed-off-by:
Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Reported-by:
Anthony Doggett <Anthony2486@interfaces.org.uk> Reported-by:
Vyacheslav Dubeyko <slava@dubeyko.com> Cc: Vyacheslav Dubeyko <slava@dubeyko.com> Tested-by:
-
Imre Deak authored
commit 4c663cfc upstream. Many callers of the wait_event_timeout() and wait_event_interruptible_timeout() expect that the return value will be positive if the specified condition becomes true before the timeout elapses. However, at the moment this isn't guaranteed. If the wake-up handler is delayed enough, the time remaining until timeout will be calculated as 0 - and passed back as a return value - even if the condition became true before the timeout has passed. Fix this by returning at least 1 if the condition becomes true. This semantic is in line with what wait_for_condition_timeout() does; see commit bb10ed09 ("sched: fix wait_for_completion_timeout() spurious failure under heavy load"). Daniel said "We have 3 instances of this bug in drm/i915. One case even where we switch between the interruptible and not interruptible wait_event_timeout variants, foolishly presuming they have the same semantics. I very much like this." One such bug is reported at https://bugs.freedesktop.org/show_bug.cgi?id=64133Signed-off-by:
Imre Deak <imre.deak@intel.com> Acked-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by:
David Howells <dhowells@redhat.com> Acked-by:
Jens Axboe <axboe@kernel.dk> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Dave Jones <davej@redhat.com> Cc: Lukas Czerner <lczerner@redhat.com> Signed-off-by:
-
wang, biao authored
commit ac5a2962 upstream. There is a race between klist_remove and klist_release. klist_remove uses a local var waiter saved on stack. When klist_release calls wake_up_process(waiter->process) to wake up the waiter, waiter might run immediately and reuse the stack. Then, klist_release calls list_del(&waiter->list) to change previous wait data and cause prior waiter thread corrupt. The patch fixes it against kernel 3.9. Signed-off-by:
wang, biao <biao.wang@intel.com> Acked-by:
Peter Zijlstra <peterz@infradead.org> Signed-off-by:
-
Leonid Yegoshin authored
commit c2cc499c upstream. Page 'new' during MIGRATION can't be flushed with flush_cache_page(). Using flush_cache_page(vma, addr, pfn) is justified only if the page is already placed in process page table, and that is done right after flush_cache_page(). But without it the arch function has no knowledge of process PTE and does nothing. Besides that, flush_cache_page() flushes an application cache page, but the kernel has a different page virtual address and dirtied it. Replace it with flush_dcache_page(new) which is the proper usage. The old page is flushed in try_to_unmap_one() before migration. This bug takes place in Sead3 board with M14Kc MIPS CPU without cache aliasing (but Harvard arch - separate I and D cache) in tight memory environment (128MB) each 1-3days on SOAK test. It fails in cc1 during kernel build (SIGILL, SIGBUS, SIGSEG) if CONFIG_COMPACTION is switched ON. Signed-off-by:
Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: Leonid Yegoshin <yegoshin@mips.com> Acked-by:
Rik van Riel <riel@redhat.com> Cc: Michal Hocko <mhocko@suse.cz> Acked-by:
Mel Gorman <mgorman@suse.de> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: David Miller <davem@davemloft.net> Signed-off-by:
-
Alexandre Bounine authored
commit 1ccc819d upstream. Fix bug in MSI interrupt handling which causes loss of event notifications. Typical indication of lost MSI interrupts are stalled message and doorbell transfers between RapidIO endpoints. To avoid loss of MSI interrupts all interrupts from the device must be disabled on entering the interrupt handler routine and re-enabled when exiting it. Re-enabling device interrupts will trigger new MSI message(s) if Tsi721 registered new events since entering interrupt handler routine. This patch is applicable to kernel versions starting from v3.2. Signed-off-by:
Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Signed-off-by:
-
Christian Gmeiner authored
commit 4b949b8a upstream. During the development of this driver an in-house register documentation was used. The last week some integration tests were done and this problem was found. It turned out that the released register documentation is wrong. The fix is very simple: shift all masks by one. Signed-off-by:
Christian Gmeiner <christian.gmeiner@gmail.com> Cc: Bryan Wu <cooloney@gmail.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
-
Martin Michlmayr authored
commit 99e11334 upstream. Enable KW_PCIE1 on QNAP TS-11x/TS-21x devices as newer revisions (rev 1.3) have a USB 3.0 chip from Etron on PCIe port 1. Thanks to Marek Vasut for identifying this issue! Signed-off-by:
Martin Michlmayr <tbm@cyrius.com> Tested-by:
Marek Vasut <marex@denx.de> Acked-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
Jason Cooper <jason@lakedaemon.net> Signed-off-by:
-
Joseph Qi authored
commit b4ca2b4b upstream. Last time we found there is lock/unlock bug in ocfs2_file_aio_write, and then we did a thorough search for all lock resources in ocfs2_inode_info, including rw, inode and open lockres and found this bug. My kernel version is 3.0.13, and it is also in the lastest version 3.9. In ocfs2_fiemap, once ocfs2_get_clusters_nocache failed, it should goto out_unlock instead of out, because we need release buffer head, up read alloc sem and unlock inode. Signed-off-by:
Joseph Qi <joseph.qi@huawei.com> Reviewed-by:
Jie Liu <jeff.liu@oracle.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Acked-by:
Sunil Mushran <sunil.mushran@gmail.com> Signed-off-by:
-
Sujith Manoharan authored
commit e99c60b5 upstream. Manual peak calibration is currently enabled only for AR9462 and AR9565. This is also required for AR9485. The initvals are also modified to disable HW peak calibration. Signed-off-by:
Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Sujith Manoharan authored
commit af690092 upstream. Make sure that any open relayfs files are closed before unregistering with mac80211, otherwise this crash is seen: [ 1331.097846] BUG: unable to handle kernel paging request at 6b6b6b8b [ 1331.098170] IP: [<c063d0d6>] debugfs_remove+0x26/0x80 [ 1331.098170] *pdpt = 000000002f9aa001 *pde = 0000000000000000 [ 1331.098170] Oops: 0000 [#1] PREEMPT SMP [ 1331.098170] Modules linked in: iptable_raw xt_CT nf_conntrack_ipv4 nf_defrag] [ 1331.098170] Pid: 4794, comm: rmmod Tainted: G WC 3.9.1+ #5 To Be Fi. [ 1331.098170] EIP: 0060:[<c063d0d6>] EFLAGS: 00010202 CPU: 0 [ 1331.098170] EIP is at debugfs_remove+0x26/0x80 [ 1331.098170] EAX: f2f3acd0 EBX: f2f3acd0 ECX: 00000006 EDX: f8622348 [ 1331.098170] ESI: 6b6b6b6b EDI: 00000001 EBP: ee251e14 ESP: ee251e0c [ 1331.098170] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 [ 1331.098170] CR0: 8005003b CR2: 6b6b6b8b CR3: 2e7b7000 CR4: 000007e0 [ 1331.098170] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 [ 1331.098170] DR6: ffff0ff0 DR7: 00000400 [ 1331.098170] Process rmmod (pid: 4794, ti=ee250000 task=efaa2560 task.ti=ee25) [ 1331.098170] Stack: [ 1331.098170] f241e170 0000000a ee251e1c f861394d ee251e28 c04e3088 f241e170 4 [ 1331.098170] c04e30fe f45482b0 ee251e54 c04e3187 f25e86b0 ee251e54 f8618748 0 [ 1331.098170] 0000000a 00000001 ee251e68 f860065b f2509e20 f25085a0 f5b6e8a4 8 [ 1331.098170] Call Trace: [ 1331.098170] [<f861394d>] remove_buf_file_handler+0xd/0x20 [ath9k] [ 1331.098170] [<c04e3088>] relay_remove_buf+0x18/0x30 [ 1331.098170] [<c04e30fe>] relay_close_buf+0x2e/0x40 [ 1331.098170] [<c04e3187>] relay_close+0x77/0xf0 [ 1331.098170] [<f8618748>] ? dpd_exit+0x38/0x40 [ath9k] [ 1331.098170] [<f860065b>] ath9k_deinit_softc+0x8b/0xa0 [ath9k] [ 1331.098170] [<f86006b8>] ath9k_deinit_device+0x48/0x60 [ath9k] [ 1331.098170] [<f86107f1>] ath_pci_remove+0x31/0x50 [ath9k] [ 1331.098170] [<c06dbff8>] pci_device_remove+0x38/0xc0 [ 1331.098170] [<c079daa4>] __device_release_driver+0x64/0xc0 [ 1331.098170] [<c079db97>] driver_detach+0x97/0xa0 [ 1331.098170] [<c079cacc>] bus_remove_driver+0x6c/0xe0 [ 1331.098170] [<c079c197>] ? bus_put+0x17/0x20 [ 1331.098170] [<c079cae3>] ? bus_remove_driver+0x83/0xe0 [ 1331.098170] [<c079e709>] driver_unregister+0x49/0x80 [ 1331.098170] [<c06dc138>] pci_unregister_driver+0x18/0x80 [ 1331.098170] [<f8610602>] ath_pci_exit+0x12/0x20 [ath9k] [ 1331.098170] [<f8619ce0>] ath9k_exit+0x17/0x337 [ath9k] [ 1331.098170] [<c09e537d>] ? mutex_unlock+0xd/0x10 [ 1331.098170] [<c04bd36c>] sys_delete_module+0x17c/0x250 [ 1331.098170] [<c0540dc4>] ? do_munmap+0x244/0x2d0 [ 1331.098170] [<c0540e96>] ? vm_munmap+0x46/0x60 [ 1331.098170] [<c09e8dc4>] ? restore_all+0xf/0xf [ 1331.098170] [<c09ebf50>] ? __do_page_fault+0x4c0/0x4c0 [ 1331.098170] [<c04b18e4>] ? trace_hardirqs_on_caller+0xf4/0x180 [ 1331.098170] [<c09ef28d>] sysenter_do_call+0x12/0x38 [ 1331.098170] Code: 90 8d 74 26 00 55 89 e5 83 ec 08 89 1c 24 89 74 24 04 3e 82 [ 1331.098170] EIP: [<c063d0d6>] debugfs_remove+0x26/0x80 SS:ESP 0068:ee251e0c [ 1331.098170] CR2: 000000006b6b6b8b [ 1331.727971] ---[ end trace b5bb9f2066cef7f9 ]--- Acked-by:
Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Tested-by:
Ben Greear <greearb@candelatech.com> Signed-off-by:
-
Ben Hutchings authored
commit 5a1e99dd upstream. The comparison between traced and symbol addresses is backwards: if the traced address doesn't exactly match a symbol (which we don't expect it to), we'll show the next symbol and the offset to it, whereas we should show the previous symbol and the offset from it. Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Ben Hutchings authored
commit 140c3c6a upstream. This works much better if we don't treat protocol numbers as addresses. Signed-off-by:
-
Michael Chan authored
commit 0f0d1510 upstream. The 5725 family of devices (asic rev 5762), corrupts TSO packets where the buffer is within MSS bytes of a 4G boundary (4G, 8G etc.). Detect this condition and trigger the workaround path. Signed-off-by:
Michael Chan <mchan@broadcom.com> Signed-off-by:
Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by:
-
Nithin Sujir authored
commit 44f3b503 upstream. On the 5718, 5719 and 5720 serdes devices, powering down function 0 results in all the other ports being powered down. Add code to skip function 0 power down. v2: - Modify tg3_phy_power_bug() function to use a switch instead of a complicated if statement. Suggested by Joe Perches. Signed-off-by:
-
OGAWA Hirofumi authored
commit 7b92d03c upstream. Intermediate value of fat_clusters can be overflowed on 32bits arch. Reported-by:
Krzysztof Strasburger <strasbur@chkw386.ch.pwr.wroc.pl> Signed-off-by:
OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by:
-
Jiri Kosina authored
commit 10b3a32d upstream. Commit 902c098a ("random: use lockless techniques in the interrupt path") turned IRQ path from being spinlock protected into lockless cmpxchg-retry update. That commit removed r->lock serialization between crediting entropy bits from IRQ context and accounting when extracting entropy on userspace read path, but didn't turn the r->entropy_count reads/updates in account() to use cmpxchg as well. It has been observed, that under certain circumstances this leads to read() on /dev/urandom to return 0 (EOF), as r->entropy_count gets corrupted and becomes negative, which in turn results in propagating 0 all the way from account() to the actual read() call. Convert the accounting code to be the proper lockless counterpart of what has been partially done by 902c098a. Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Jarod Wilson authored
commit 1e7e2e05 upstream. Commit ec8f02da ("random: prime last_data value per fips requirements") added priming of last_data per fips requirements. Unfortuantely, it did so in a way that can lead to multiple threads all incrementing nbytes, but only one actually doing anything with the extra data, which leads to some fun random corruption and panics. The fix is to simply do everything needed to prime last_data in a single shot, so there's no window for multiple cpus to increment nbytes -- in fact, we won't even increment or decrement nbytes anymore, we'll just extract the needed EXTRACT_SIZE one time per pool and then carry on with the normal routine. All these changes have been tested across multiple hosts and architectures where panics were previously encoutered. The code changes are are strictly limited to areas only touched when when booted in fips mode. This change should also go into 3.8-stable, to make the myriads of fips users on 3.8.x happy. Signed-off-by:
Jarod Wilson <jarod@redhat.com> Tested-by:
Jan Stancek <jstancek@redhat.com> Tested-by:
Jan Stodola <jstodola@redhat.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Matt Mackall <mpm@selenic.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by:
-
Vineet Gupta authored
commit a950549c upstream. This manifested as grep failing psuedo-randomly: -------------->8--------------------- [ARCLinux]$ ip address show lo | grep inet [ARCLinux]$ ip address show lo | grep inet [ARCLinux]$ ip address show lo | grep inet [ARCLinux]$ [ARCLinux]$ ip address show lo | grep inet inet 127.0.0.1/8 scope host lo -------------->8--------------------- ARC700 MMU provides fully orthogonal permission bits per page: Ur, Uw, Ux, Kr, Kw, Kx The user mode page permission templates used to have all Kernel mode access bits enabled. This caused a tricky race condition observed with uClibc buffered file read and UNIX pipes. 1. Read access to an anon mapped page in libc .bss: write-protected zero_page mapped: TLB Entry installed with Ur + K[rwx] 2. grep calls libc:getc() -> buffered read layer calls read(2) with the internal read buffer in same .bss page. The read() call is on STDIN which has been redirected to a pipe. read(2) => sys_read() => pipe_read() => copy_to_user() 3. Since page has Kernel-write permission (despite being user-mode write-protected), copy_to_user() suceeds w/o taking a MMU TLB-Miss Exception (page-fault for ARC). core-MM is unaware that kernel erroneously wrote to the reserved read-only zero-page (BUG #1) 4. Control returns to userspace which now does a write to same .bss page Since Linux MM is not aware that page has been modified by kernel, it simply reassigns a new writable zero-init page to mapping, loosing the prior write by kernel - effectively zero'ing out the libc read buffer under the hood - hence grep doesn't see right data (BUG #2) The fix is to make all kernel-mode access permissions mirror the user-mode ones. Note that the kernel still has full access to pages, when accessed directly (w/o MMU) - this fix ensures that kernel-mode access in copy_to_from() path uses the same faulting access model as for pure user accesses to keep MM fully aware of page state. The issue is peudo-random because it only shows up if the TLB entry installed in #1 is present at the time of #3. If it is evicted out, due to TLB pressure or some-such, then copy_to_user() does take a TLB Miss Exception, with a routine write-to-anon COW processing installing a fresh page for kernel writes and also usable as it is in userspace. Further the issue was dormant for so long as it depends on where the libc internal read buffer (in .bss) is mapped at runtime. If it happens to reside in file-backed data mapping of libc (in the page-aligned slack space trailing the file backed data), loader zero padding the slack space, does the early cow page replacement, setting things up at the very beginning itself. With gcc 4.8 based builds, the libc buffer got pushed out to a real anon mapping which triggers the issue. Reported-by:
Anton Kolesov <akolesov@synopsys.com> Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
Jeff Layton authored
commit c2b93e06 upstream. It's generally not safe to reset the inode ops once they've been set. In the case where the inode was originally thought to be a directory and then later found to be a DFS referral, this can lead to an oops when we try to trigger an inode op on it after changing the ops to the blank referral operations. Reported-and-Tested-by:
Sachin Prabhu <sprabhu@redhat.com> Signed-off-by:
Jeff Layton <jlayton@redhat.com> Signed-off-by:
Steve French <smfrench@gmail.com> Signed-off-by:
-
K. Y. Srinivasan authored
commit d2242a38 upstream. Linux' notion of cpuid is different from the Host's notion of CPUID. In the call to bind the channel interrupts, we should use the host's notion of CPU Ids. Fix this bug. Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Signed-off-by:
-
Heiko Abraham authored
commit 3c9cfa78 upstream. The egalax_ts touchscreen modul not report ABS_MT_POSITION_Y proper. As result it may be, that upper software levels only receive x coordinates well. Signed-off-by:
Heiko Abraham <abrahamh@web.de> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Alan Stern authored
commit 997ff893 upstream. HP's virtual UHCI host controller takes a long time to suspend (several hundred microseconds), even when no devices are attached. This provokes a warning message from uhci-hcd in the auto-stop case. To prevent this from happening, this patch adds a test to avoid performing an auto-stop when the wait_for_hp quirk flag is set. The controller will still suspend through the normal runtime PM mechanism. And since that pathway includes a 1-ms delay, the slowness of the virtual hardware won't matter. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Reported-and-tested-by:
ZhenHua <zhen-hual@hp.com> Signed-off-by:
-
Alan Stern authored
commit e4f47e36 upstream. This patch shortens the logic in xhci_endpoint_init() by moving common calculations involving max_packet and max_burst outside the switch statement, rather than repeating the same code in multiple case-specific statements. It also replaces two usages of max_packet which were clearly intended to be max_burst all along. More importantly, it compensates for a common bug in high-speed bulk endpoint descriptors. In many devices there is a bulk endpoint having a wMaxPacketSize value smaller than 512, which is forbidden by the USB spec. Some xHCI controllers can't handle this and refuse to accept the endpoint. This patch changes the max_packet value to 512, which allows the controller to use the endpoint properly. In practice the bogus maxpacket size doesn't matter, because none of the transfers sent via these endpoints are longer than the maxpacket value anyway. Signed-off-by:
"Aurélien Leblond" <blablack@gmail.com> Signed-off-by:
-
Oliver Neukum authored
commit bac6b032 upstream. Werner Fink has reported problems with this hub. Signed-off-by:
Oliver Neukum <oliver@neukum.org> Signed-off-by:
-
Schemmel Hans-Christoph authored
commit 8ff10bdb upstream. /drivers/usb/serial/option.c: Blacklisted Cinterion's PLxx WWAN Interface (USB Interface 4), because it will be handled by QMI WWAN driver. Product IDs renamed. Signed-off-by:
Hans-Christoph Schemmel <hans-christoph.schemmel@gemalto.com> Signed-off-by:
-
Wang YanQing authored
commit dab73b4e upstream. I meet emacs hang in start if I do the operation below: 1: echo 3 > /proc/sys/vm/drop_caches 2: emacs BigFile 3: Press CTRL-S follow 2 immediately Then emacs hang on, CTRL-Q can't resume, the terminal hang on, you can do nothing with this terminal except close it. The reason is before emacs takeover control the tty, we use CTRL-S to XOFF it. Then when emacs takeover the control, it may don't use the flow-control, so emacs hang. This patch fix it. This patch will fix a kind of strange tty relation hang problem, I believe I meet it with vim in ssh, and also see below bug report: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=465823Signed-off-by:
Wang YanQing <udknight@gmail.com> Signed-off-by:
-
Dan Carpenter authored
commit 2a0ebf80 upstream. The value of "offd" comes off the instance->rcv_buf[] and we used it as the offset into an array. The problem is that we check the upper bound but not for negative values. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Gomella, Andrew (NIH/NHLBI) [F] authored
commit 71381439 upstream. Here are two more devices that use FTDI USB-to-serial chips with new product ID's. The devices are the Newport Conex-AGP and Conex-CC motor controllers. (http://www.newport.com/CONEX-AGP-Integrated-Piezo-Motor-Rotation-Stages-/987623/1033/info.aspx) (http://www.newport.com/CONEX-CC-DC-Servo-Controller-Actuators/934114/1033/info.aspx) usb-devices command yields: P: Vendor=104d ProdID=3002 Rev=06.00 S: Manufacturer=Newport S: Product=CONEX-CC as well as P: Vendor=104d ProdID=3006 Rev=06.00 S: Manufacturer=Newport S: Product=CONEX-AGP Signed-off-by:
Andrew Gomella <andrew.gomella@nih.gov> Signed-off-by:
-
Dan Williams authored
commit 49c6e370 upstream. A rebranded Novatel E371 for AT&T's LTE bands. Signed-off-by:
Dan Williams <dcbw@redhat.com> Signed-off-by:
-
Teppo Kotilainen authored
commit 73c042df upstream. Information from driver description files: diag: VID_19D2&PID_0412&MI_00 nmea: VID_19D2&PID_0412&MI_01 at: VID_19D2&PID_0412&MI_02 modem: VID_19D2&PID_0412&MI_03 net: VID_19D2&PID_0412&MI_04 Signed-off-by:
Teppo Kotilainen <qubit303@gmail.com> Signed-off-by:
-
David Rientjes authored
commit 7c8bfed7 upstream. Fixes link error when USB_EHCI_HCD=m and USB_CHIPIDEA_HOST=y: drivers/built-in.o: In function `ci_hdrc_host_init': drivers/usb/chipidea/host.c:104: undefined reference to `ehci_init_driver' as a result of commit 09f6ffde ("USB: EHCI: fix build error by making ChipIdea host a normal EHCI driver"). Signed-off-by:
David Rientjes <rientjes@google.com> Signed-off-by:
-
Hema Prathaban authored
commit 0a438d5b upstream. use free_netdev() instead of kfree(pDevice->apdev) Signed-off-by:
Hema Prathaban <hemaklnce@gmail.com> Signed-off-by:
-
![Gomella, Andrew (NIH/NHLBI) [F]'s avatar](https://secure.gravatar.com/avatar/bfa6f109d396238589be34a784facb06?s=80&d=identicon "Gomella, Andrew (NIH/NHLBI) [F]")
