- 11 Nov, 2015 40 commits
-
-
Jonas Gorski authored
Similar to how arm allows using selecting between bootloader arguments, dtb arguments and both, allow to select them on mips. But since we have less control over the place of the dtb do not modify it but instead use the boot_command_line for merging them. The default is "use bootloader arguments" to keep the current behaviour as default. Signed-off-by:
Jonas Gorski <jogo@openwrt.org> Cc: linux-mips@linux-mips.org Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: John Crispin <blogic@openwrt.org> Cc: Ganesan Ramalingam <ganesanr@broadcom.com> Cc: Jayachandran C <jchandra@broadcom.com> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: James Hartley <james.hartley@imgtec.com> Patchwork: https://patchwork.linux-mips.org/patch/11284/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Jonas Gorski authored
Since OF is now a user selectable symbol, the choice for appended dtb support should only be visible when USE_OF is selected, as this indicates actual machine support for device tree in MIPS. Signed-off-by:
-
Gregory Fong authored
Signed-off-by:
Gregory Fong <gregory.0xf0@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Jonas Gorski <jogo@openwrt.org> Cc: Joe Perches <joe@perches.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Nicolas Schichan <nschichan@freebox.fr> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11300/Signed-off-by:
-
Huacai Chen authored
Now LOONGSON_CHIPCFG register definition doesn't depend on CPUFREQ any more, so CPU_SUPPORTS_CPUFREQ is no longer needed for suspend/resume. Remove CONFIG_LOONGSON_SUSPEND and use CONFIG_SUSPEND instead. Signed-off-by:
Huacai Chen <chenhc@lemote.com> Cc: John Crispin <john@phrozen.org> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11274/Signed-off-by:
-
John Crispin authored
Signed-off-by:
John Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11458/Signed-off-by:
-
John Crispin authored
Signed-off-by:
-
John Crispin authored
There is a DWC2 USB core in these SoCs. To make USB work we need to first reset and power the state machine. These are SoC specific registers and not part of the actual USB core. Signed-off-by:
Antti Seppälä <a.seppala@gmail.com> Signed-off-by:
-
John Crispin authored
Some configurations of AR9 reported the incorrect speed for the fpi bus. Signed-off-by:
Ben Mulvihill <ben.mulvihill@gmail.com> Signed-off-by:
-
John Crispin authored
The rt305x support is missing a clock required by the ethernet driver. Signed-off-by:
-
John Crispin authored
Some pcie cards have problems after a reboot without this. Signed-off-by:
-
John Crispin authored
Setting pm_power_off is apprently wrong and makes drivers such as gpio-poweroff not work. Signed-off-by:
-
John Crispin authored
The code currently panics if PCI is enabled but the SoC has no PCI bus. This check is superfluous as the driver only loads if enabled in the devicetree. Signed-off-by:
-
John Crispin authored
The current code adds the delta twice, which is obviously wrong. Signed-off-by:
-
John Crispin authored
MT7688 has several uarts that can be used for console. There are several boards in the wild, that use ttyS1 or ttyS2. This patch applies a simply autodetection routine to figure out which ttyS the bootloader used as console. The uarts come up in 6 bit mode by default. The bootloader will have set 8 bit mode on the console. Find that 8bit tty and use it. Signed-off-by:
-
John Crispin authored
If the USB HCD is running and the cpu is scaled too low, then the USB stops working. Increase the idle speed of the core to fix this if the kernel is built with USB support. The "magic" values are taken from the Ralink SDK Kernel. Signed-off-by:
-
John Crispin authored
This makes detection a lot easier for audio, wifi, ... drivers. Signed-off-by:
-
John Crispin authored
MT7688 is similar tot he MT7628 but has a different wifi radio. Signed-off-by:
-
Jaedon Shin authored
Add AHCI and PHY device nodes to MIPS-based BCM7362 set-top box platform. Signed-off-by:
Jaedon Shin <jaedon.shin@gmail.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Dragan Stancevic <dragan.stancevic@gmail.com> Cc: linux-ide@vger.kernel.org Cc: Linux-MIPS <linux-mips@linux-mips.org> Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11379/Signed-off-by:
-
Jaedon Shin authored
Add AHCI and PHY device nodes to MIPS-based BCM7346 set-top box platform. Signed-off-by:
-
Jaedon Shin authored
Add AHCI and PHY device nodes to MIPS-based BCM7425 set-top box platform. Signed-off-by:
-
Jaedon Shin authored
Add I2C device nodes to BMIPS based BCM7362 platform. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Cc: Wolfram Sang <wsa@the-dreams.de> Cc: Kamal Dasu <kdasu.kdev@gmail.com> Cc: linux-i2c@vger.kernel.org Cc: devicetree@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11336/Signed-off-by:
-
Jaedon Shin authored
Add I2C device nodes to BMIPS based BCM7360 platform. Signed-off-by:
-
Jaedon Shin authored
Add I2C device nodes to BMIPS based BCM7358 platform. Signed-off-by:
-
Jaedon Shin authored
Add I2C device nodes to BMIPS based BCM7346 platform. Signed-off-by:
-
Hauke Mehrtens authored
request_mem_region() returns a pointer and not an integer with an error value. A check for "< 0" on a pointer will cause problems, replace it with not null checks instead. This was found with sparse. Signed-off-by:
Hauke Mehrtens <hauke.mehrtens@lantiq.com> Acked-by:
-
Hauke Mehrtens authored
Signed-off-by:
-
Hauke Mehrtens authored
Signed-off-by:
-
Hauke Mehrtens authored
Signed-off-by:
-
Hauke Mehrtens authored
Signed-off-by:
-
Hauke Mehrtens authored
Signed-off-by:
-
Hauke Mehrtens authored
Signed-off-by:
-
Hauke Mehrtens authored
Signed-off-by:
-
Hauke Mehrtens authored
This adds the PUM bits for USB and SDIO devices Signed-off-by:
-
Hauke Mehrtens authored
When the SoC starts up most of the devices should be deactivated by the PMU, they should be activated when they get used by their drivers. Some devices should not get deactivate at startup like the serial, register them in a special way. Signed-off-by:
-
Hauke Mehrtens authored
This add detection of some clocks on the ar10 and grx390. Signed-off-by:
-
Hauke Mehrtens authored
The vendor code uses different clock values for this clock. Signed-off-by:
-
Hauke Mehrtens authored
This register is also used on other SoCs. Signed-off-by:
-
Hauke Mehrtens authored
This adds support for setting the PMU register on the AR10 and GRX390. Signed-off-by:
-
Hauke Mehrtens authored
The PMU register are accessed in a non atomic way and they could be accessed by different threads simultaneously, which could cause problems this patch adds locking around the PMU registers. In addition we now also wait till the PMU is actually deactivated. [ralf@linux-mips.org: Fix spelling mistake in commit message as noticed by Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>.] Signed-off-by:
-
Rafał Miłecki authored
This drops another symbol dependency between setup.c and sprom.c which will allow us to make SPROM code a separated module (and share it with ARM). Patch tested on Linksys WRT300N V1. Signed-off-by:
Rafał Miłecki <zajec5@gmail.com> Cc: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11360/Signed-off-by:
-
