Pull locking fixes from Ingo Molnar:
 "Two lockdep fixes"

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  lockdep: Fix lock_chain::base size
  locking/lockdep: Fix ->irq_context calculation

Pull EFI fix from Ingo Molnar:
 "This fixes a bug in the efivars code"

* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  efi: Fix out-of-bounds read in variable_matches()

Pull media fixes from Mauro Carvalho Chehab:
 "Some regression fixes:

   - videobuf2 core: avoid the risk of going past buffer on multi-planes
     and fix rw mode

   - fix support for 4K formats at V4L2 core

   - fix a trouble at davinci_fpe, caused by a bad patch

   - usbvision: revert a patch with a partial fixup.  The fixup patch
     was merged already, and this one has some issues"

* tag 'media/v4.6-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  [media] vb2-memops: Fix over allocation of frame vectors
  [media] media: vb2: Fix regression on poll() for RW mode
  [media] v4l2-dv-timings.h: fix polarity for 4k formats
  [media] davinci_vpfe: Revert "staging: media: davinci_vpfe: remove,unnecessary ret variable"
  [media] usbvision: revert commit 588afcc1
  [media] videobuf2-v4l2: Verify planes array in buffer dequeueing
  [media] videobuf2-core: Check user space planes array in dqbuf

Pull sound fixes from Takashi Iwai:
 "Usually we get a big collection of fixes for ASoC once during rc.  And
  this is it.

  At this time, most of fixes are about Intel Skylake ASoC driver, which
  is a new and still on-going development.  Along with it, a slight
  large LOC is seen in legacy HD-audio driver, but it's merely a code
  move to the upper layer.

  Other than that, the rest are small or trivial fixes to various
  drivers, in addition to an ASoC dapm debugfs code fix"

* tag 'sound-4.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (24 commits)
  ALSA: hda - Update BCLK also at hotplug for i915 HSW/BDW
  ALSA: hda - Add dock support for ThinkPad X260
  ASoC: wm5102: Free compressed IRQ in CODEC remove
  ASoC: arizona: Free speaker thermal IRQs in CODEC remove
  ASoC: Intel: Skylake: Fix ibs/obs calc for non-integral sampling rates
  ASoC: Intel: sst: fix a loop timeout in sst_hsw_stream_reset()
  ASoC: Intel: Skylake: Fix to turn OFF codec power when entering S3
  ASoC: hdac_hdmi: Fix codec power state in S3 during playback
  ASoC: hdac_hdmi: Fix to use dev_pm ops instead soc pm
  ASoC: wm8962: Correct typo when setting DSPCLK rate
  ASoC: nau8825: Fix jack detection across suspend
  ASoC: Intel: Skylake: Fix DSP resource de-allocation
  ASoC: Intel: Skylake: Fix for unloading module only when it is loaded
  ASoC: Intel: Skylake: Fix kbuild dependency
  ASoC: dapm: Make sure we have a card when displaying component widgets
  ASoC: rt5640: Correct the digital interface data select
  ASoC: Intel: Skylake: remove call to pci_dev_put
  ASoC: Intel: Skylake: Call i915 exit last
  ASoC: Intel: Skylake: Unmap the address last
  ASoC: Intel: Skylake: Freeup properly on skl_dsp_free
  ...

Pull Ceph fixes from Sage Weil:
 "There is a lifecycle fix in the auth code, a fix for a narrow race
  condition on map, and a helpful message in the log when there is a
  feature mismatch (which happens frequently now that the default
  server-side options have changed)"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  rbd: report unsupported features to syslog
  rbd: fix rbd map vs notify races
  libceph: make authorizer destruction independent of ceph_auth_client

Pull s390 fixes from Martin Schwidefsky:
 "Three more bug fixes for 4.6

   - Due to a race in the dynamic page table code a multi-threaded
     program can cause a translation specification exception.  With
     panic_on_oops a user space program can crash the system.

   - An information leak with the /dev/sclp device.

   - A use after free in the s390 PCI code"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/sclp_ctl: fix potential information leak with /dev/sclp
  s390/mm: fix asce_bits handling with dynamic pagetable levels
  s390/pci: fix use after free in dma_init

... instead of just returning an error.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Josh Durgin <jdurgin@redhat.com>

A while ago, commit 9875201e ("rbd: fix use-after free of
rbd_dev->disk") fixed rbd unmap vs notify race by introducing
an exported wrapper for flushing notifies and sticking it into
do_rbd_remove().

A similar problem exists on the rbd map path, though: the watch is
registered in rbd_dev_image_probe(), while the disk is set up quite
a few steps later, in rbd_dev_device_setup().  Nothing prevents
a notify from coming in and crashing on a NULL rbd_dev->disk:

    BUG: unable to handle kernel NULL pointer dereference at 0000000000000050
    Call Trace:
     [<ffffffffa0508344>] rbd_watch_cb+0x34/0x180 [rbd]
     [<ffffffffa04bd290>] do_event_work+0x40/0xb0 [libceph]
     [<ffffffff8109d5db>] process_one_work+0x17b/0x470
     [<ffffffff8109e3ab>] worker_thread+0x11b/0x400
     [<ffffffff8109e290>] ? rescuer_thread+0x400/0x400
     [<ffffffff810a5acf>] kthread+0xcf/0xe0
     [<ffffffff810b41b3>] ? finish_task_switch+0x53/0x170
     [<ffffffff810a5a00>] ? kthread_create_on_node+0x140/0x140
     [<ffffffff81645dd8>] ret_from_fork+0x58/0x90
     [<ffffffff810a5a00>] ? kthread_create_on_node+0x140/0x140
    RIP  [<ffffffffa050828a>] rbd_dev_refresh+0xfa/0x180 [rbd]

If an error occurs during rbd map, we have to error out, potentially
tearing down a watch.  Just like on rbd unmap, notifies have to be
flushed, otherwise rbd_watch_cb() may end up trying to read in the
image header after rbd_dev_image_release() has run:

    Assertion failure in rbd_dev_header_info() at line 4722:

     rbd_assert(rbd_image_format_valid(rbd_dev->image_format));

    Call Trace:
     [<ffffffff81cccee0>] ? rbd_parent_request_create+0x150/0x150
     [<ffffffff81cd4e59>] rbd_dev_refresh+0x59/0x390
     [<ffffffff81cd5229>] rbd_watch_cb+0x69/0x290
     [<ffffffff81fde9bf>] do_event_work+0x10f/0x1c0
     [<ffffffff81107799>] process_one_work+0x689/0x1a80
     [<ffffffff811076f7>] ? process_one_work+0x5e7/0x1a80
     [<ffffffff81132065>] ? finish_task_switch+0x225/0x640
     [<ffffffff81107110>] ? pwq_dec_nr_in_flight+0x2b0/0x2b0
     [<ffffffff81108c69>] worker_thread+0xd9/0x1320
     [<ffffffff81108b90>] ? process_one_work+0x1a80/0x1a80
     [<ffffffff8111b02d>] kthread+0x21d/0x2e0
     [<ffffffff8111ae10>] ? kthread_stop+0x550/0x550
     [<ffffffff82022802>] ret_from_fork+0x22/0x40
     [<ffffffff8111ae10>] ? kthread_stop+0x550/0x550
    RIP  [<ffffffff81ccd8f9>] rbd_dev_header_info+0xa19/0x1e30

To fix this, a) check if RBD_DEV_FLAG_EXISTS is set before calling
revalidate_disk(), b) move ceph_osdc_flush_notifies() call into
rbd_dev_header_unwatch_sync() to cover rbd map error paths and c) turn
header read-in into a critical section.  The latter also happens to
take care of rbd map foo@bar vs rbd snap rm foo@bar race.

Fixes: http://tracker.ceph.com/issues/15490Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Josh Durgin <jdurgin@redhat.com>

Pull workqueue fix from Tejun Heo:
 "So, it turns out we had a silly bug in the most fundamental part of
  workqueue for a very long time.  AFAICS, this dates back to pre-git
  era and has quite likely been there from the time workqueue was first
  introduced.

  A work item uses its PENDING bit to synchronize multiple queuers.
  Anyone who wins the PENDING bit owns the pending state of the work
  item.  Whether a queuer wins or loses the race, one thing should be
  guaranteed - there will soon be at least one execution of the work
  item - where "after" means that the execution instance would be able
  to see all the changes that the queuer has made prior to the queueing
  attempt.

  Unfortunately, we were missing a smp_mb() after clearing PENDING for
  execution, so nothing guaranteed visibility of the changes that a
  queueing loser has made, which manifested as a reproducible blk-mq
  stall.

  Lots of kudos to Roman for debugging the problem.  The patch for
  -stable is the minimal one.  For v3.7, Peter is working on a patch to
  make the code path slightly more efficient and less fragile"

* 'for-4.6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: fix ghost PENDING flag while doing MQ IO

Pull cgroup fixes from Tejun Heo:
 "Two patches to fix a deadlock which can be easily triggered if memcg
  charge moving is used.

  This bug was introduced while converting threadgroup locking to a
  global percpu_rwsem and is caused by cgroup controller task migration
  path depending on the ability to create new kthreads.  cpuset had a
  similar issue which was fixed by performing heavy-lifting operations
  asynchronous to task migration.  The two patches fix the same issue in
  memcg in a similar way.  The first patch makes the mechanism generic
  and the second relocates memcg charge moving outside the migration
  path.

  Given that we don't want to perform heavy operations while
  writelocking threadgroup lock anyway, moving them out of the way is a
  desirable solution.  One thing to note is that the problem was
  difficult to debug because lockdep couldn't figure out the deadlock
  condition.  Looking into how to improve that"

* 'for-4.6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  memcg: relocate charge moving from ->attach to ->post_attach
  cgroup, cpuset: replace cpuset_post_attach_flush() with cgroup_subsys->post_attach callback

Pull i2c fixes from Wolfram Sang:
 "I2C has one buildfix, one ABBA deadlock fix, and three simple 'add ID'
  patches"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: exynos5: Fix possible ABBA deadlock by keeping I2C clock prepared
  i2c: cpm: Fix build break due to incompatible pointer types
  i2c: ismt: Add Intel DNV PCI ID
  i2c: xlp9xx: add support for Broadcom Vulcan
  i2c: rk3x: add support for rk3228

Pull ARC fixes from Vineet Gupta:

 - lockdep now works for ARCv2 builds

 - enable DT reserved-memory binding (for forthcoming HDMI driver)

* tag 'arc-4.6-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: add support for reserved memory defined by device tree
  ARC: support generic per-device coherent dma mem
  Documentation: dt: arc: fix spelling mistakes
  ARCv2: Enable LOCKDEP

Pull arch/nios2 fix from Ley Foon Tan:
 "memset: use the right constraint modifier for the %4 output operand"

* tag 'nios2-v4.6-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2:
  nios2: memset: use the right constraint modifier for the %4 output operand

Merge tag 'platform-drivers-x86-v4.6-3' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86

Pull x86 platform driver fix from Darren Hart:
 "Fix regression caused by hotkey enabling value in toshiba_acpi"

* tag 'platform-drivers-x86-v4.6-3' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86:
  toshiba_acpi: Fix regression caused by hotkey enabling value

Merge tag 'asoc-fix-v4.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v4.6

This is a fairly large collection of fixes but almost all driver
specific ones, especially to the new Intel drivers which have had a lot
of recent development.  The one core fix is a change to the debugfs code
to avoid crashes in some relatively unusual configurations.

Enable reserved memory initialization from device tree.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>

Depending on the size of the area to be memset'ed, the nios2 memset implementation
either uses a naive loop (for buffers smaller or equal than 8 bytes) or a more optimized
implementation (for buffers larger than 8 bytes). This implementation does 4-byte stores
rather than 1-byte stores to speed up memset.

However, we discovered that on our nios2 platform, memset() was not properly setting the
buffer to the expected value. A memset of 0xff would not set the entire buffer to 0xff, but to:

0xff 0x00 0xff 0x00 0xff 0x00 0xff 0x00 ...

Which is obviously incorrect. Our investigation has revealed that the problem lies in the
incorrect constraints used in the inline assembly.

The following piece of assembly, from the nios2 memset implementation, is supposed to
create a 4-byte value that repeats 4 times the 1-byte pattern passed as memset argument:

/* fill8 %3, %5 (c & 0xff) */
"       slli    %4, %5, 8\n"
"       or      %4, %4, %5\n"
"       slli    %3, %4, 16\n"
"       or      %3, %3, %4\n"

However, depending on the compiler and optimization level, this code might be compiled as:

34:	280a923a 	slli	r5,r5,8
38:	294ab03a 	or	r5,r5,r5
3c:	2808943a 	slli	r4,r5,16
40:	2148b03a 	or	r4,r4,r5

This is wrong because r5 gets used both for %5 and %4, which leads to the final pattern
stored in r4 to be 0xff00ff00 rather than the expected 0xffffffff.

%4 is defined with the "=r" constraint, i.e as an output operand. However, as explained in
http://www.ethernut.de/en/documents/arm-inline-asm.html, this does not prevent gcc from
using the same register for an output operand (%4) and input operand (%5). By using the
constraint modifier '&', we indicate that the register should be used for output only. With this
change, we get the following assembly output:

34:	2810923a 	slli	r8,r5,8
38:	4150b03a 	or	r8,r8,r5
3c:	400e943a 	slli	r7,r8,16
40:	3a0eb03a 	or	r7,r7,r8

Which correctly produces the 0xffffffff pattern when 0xff is passed as the memset() pattern.

It is worth mentioning the observed consequence of this bug: we were hitting the kernel
BUG() in mm/bootmem.c:__free() that verifies when marking a page as free that it was
previously marked as occupied (i.e that the bit was set to 1). The entire bootmem bitmap is
set to 0xff bit via a memset() during the bootmem initialization. The bootmem_free() call right
after the initialization was finding some bits to be set to 0, which didn't make sense since the
bitmap has just been memset'ed to 0xff. Except that due to the bug explained above, the
bitmap was in fact initialized to 0xff00ff00.

Thanks to Marek Vasut for his help and feedback.
Signed-off-by: Romain Perier <romain.perier@free-electrons.com>
Acked-by: Marek Vasut <marex@denx.de>
Acked-by: Ley Foon Tan <lftan@altera.com>

The sclp_ctl_ioctl_sccb function uses two copy_from_user calls to
retrieve the sclp request from user space. The first copy_from_user
fetches the length of the request which is stored in the first two
bytes of the request. The second copy_from_user gets the complete
sclp request, but this copies the length field a second time.
A malicious user may have changed the length in the meantime.
Reported-by: Pengfei Wang <wpengfeinudt@gmail.com>
Reviewed-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Pull networking fixes from David Miller:

 1) Handle v4/v6 mixed sockets properly in soreuseport, from Craig
    Gallak.

 2) Bug fixes for the new macsec facility (missing kmalloc NULL checks,
    missing locking around netdev list traversal, etc.) from Sabrina
    Dubroca.

 3) Fix handling of host routes on ifdown in ipv6, from David Ahern.

 4) Fix double-fdput in bpf verifier.  From Jann Horn.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (31 commits)
  bpf: fix double-fdput in replace_map_fd_with_map_ptr()
  net: ipv6: Delete host routes on an ifdown
  Revert "ipv6: Revert optional address flusing on ifdown."
  net/mlx4_en: fix spurious timestamping callbacks
  net: dummy: remove note about being Y by default
  cxgbi: fix uninitialized flowi6
  ipv6: Revert optional address flusing on ifdown.
  ipv4/fib: don't warn when primary address is missing if in_dev is dead
  net/mlx5: Add pci shutdown callback
  net/mlx5_core: Remove static from local variable
  net/mlx5e: Use vport MTU rather than physical port MTU
  net/mlx5e: Fix minimum MTU
  net/mlx5e: Device's mtu field is u16 and not int
  net/mlx5_core: Add ConnectX-5 to list of supported devices
  net/mlx5e: Fix MLX5E_100BASE_T define
  net/mlx5_core: Fix soft lockup in steering error flow
  qlcnic: Update version to 5.3.64
  net: stmmac: socfpga: Remove re-registration of reset controller
  macsec: fix netlink attribute validation
  macsec: add missing macsec prefix in uapi
  ...

Pull ARM SoC fixes from Arnd Bergmann:
 "Here are the latest bug fixes for ARM SoCs, mostly addressing recent
  regressions.  Changes are across several platforms, so I'm listing
  every change separately here.

  Regressions since 4.5:

   - A correction of the psci firmware DT binding, to prevent users from
     relying on unintended semantics

   - Actually getting the newly merged clock driver for some OMAP
     platforms to work

   - A revert of patches for the Qualcomm BAM, these need to be reworked
     for 4.7 to avoid breaking boards other than the one they were
     intended for

   - A correction for the I2C device nodes on the Socionext Uniphier
     platform

   - i.MX SDHCI was broken for non-DT platforms due to a change with the
     setting of the DMA mask

   - A revert of a patch that accidentally added a nonexisting clock on
     the Rensas "Porter" board

   - A couple of OMAP fixes that are all related to suspend after the
     power domain changes for dra7

   - On Mediatek, revert part of the power domain initialization changes
     that broke mt8173-evb

  Fixes for older bugs:

   - Workaround for an "external abort" in the omap34xx suspend/resume
     code.

   - The USB1/eSATA should not be listed as an excon device on
     am57xx-beagle-x15 (broken since v4.0)

   - A v4.5 regression in the TI AM33xx and AM43XX DT specifying
     incorrect DMA request lines for the GPMC

   - The jiffies calibration on Renesas platforms was incorrect for some
     modern CPU cores.

   - A hardware errata woraround for clockdomains on TI DRA7"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  drivers: firmware: psci: unify enable-method binding on ARM {64,32}-bit systems
  arm64: dts: uniphier: fix I2C nodes of PH1-LD20
  ARM: shmobile: timer: Fix preset_lpj leading to too short delays
  Revert "ARM: dts: porter: Enable SCIF_CLK frequency and pins"
  ARM: dts: r8a7791: Don't disable referenced optional clocks
  Revert "ARM: OMAP: Catch callers of revision information prior to it being populated"
  ARM: OMAP3: Fix external abort on 36xx waking from off mode idle
  ARM: dts: am57xx-beagle-x15: remove extcon_usb1
  ARM: dts: am437x: Fix GPMC dma properties
  ARM: dts: am33xx: Fix GPMC dma properties
  Revert "soc: mediatek: SCPSYS: Fix double enabling of regulators"
  ARM: mach-imx: sdhci-esdhc-imx: initialize DMA mask
  ARM: DRA7: clockdomain: Implement timer workaround for errata i874
  ARM: OMAP: Catch callers of revision information prior to it being populated
  ARM: dts: dra7: Correct clock tree for sys_32k_ck
  ARM: OMAP: DRA7: Provide proper class to omap2_set_globals_tap
  ARM: OMAP: DRA7: wakeupgen: Skip SAR save for wakeupgen
  Revert "dts: msm8974: Add dma channels for blsp2_i2c1 node"
  Revert "dts: msm8974: Add blsp2_bam dma node"
  ARM: dts: Add clocks for dm814x ADPLL

This is more prep-work for the upcoming pty changes.  Still just code
cleanup with no actual semantic changes.

This removes a bunch pointless complexity by just having the slave pty
side remember the dentry associated with the devpts slave rather than
the inode.  That allows us to remove all the "look up the dentry" code
for when we want to remove it again.

Together with moving the tty pointer from "inode->i_private" to
"dentry->d_fsdata" and getting rid of pointless inode locking, this
removes about 30 lines of code.  Not only is the end result smaller,
it's simpler and easier to understand.

The old code, for example, depended on the d_find_alias() to not just
find the dentry, but also to check that it is still hashed, which in
turn validated the tty pointer in the inode.

That is a _very_ roundabout way to say "invalidate the cached tty
pointer when the dentry is removed".

The new code just does

	dentry->d_fsdata = NULL;

in devpts_pty_kill() instead, invalidating the tty pointer rather more
directly and obviously.  Don't do something complex and subtle when the
obvious straightforward approach will do.

The rest of the patch (ie apart from code deletion and the above tty
pointer clearing) is just switching the calling convention to pass the
dentry or file pointer around instead of the inode.

Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Peter Anvin <hpa@zytor.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: Serge Hallyn <serge.hallyn@ubuntu.com>
Cc: Willy Tarreau <w@1wt.eu>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Alan Cox <gnomes@lxorguk.ukuu.org.uk>
Cc: Jann Horn <jann@thejh.net>
Cc: Greg KH <greg@kroah.com>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: Florian Weimer <fw@deneb.enyo.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When bpf(BPF_PROG_LOAD, ...) was invoked with a BPF program whose bytecode
references a non-map file descriptor as a map file descriptor, the error
handling code called fdput() twice instead of once (in __bpf_map_get() and
in replace_map_fd_with_map_ptr()). If the file descriptor table of the
current task is shared, this causes f_count to be decremented too much,
allowing the struct file to be freed while it is still in use
(use-after-free). This can be exploited to gain root privileges by an
unprivileged user.

This bug was introduced in
commit 0246e64d ("bpf: handle pseudo BPF_LD_IMM64 insn"), but is only
exploitable since
commit 1be7f75d ("bpf: enable non-root eBPF programs") because
previously, CAP_SYS_ADMIN was required to reach the vulnerable code.

(posted publicly according to request by maintainer)
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge remote-tracking branches 'asoc/fix/arizona', 'asoc/fix/cs35l32', 'asoc/fix/hdac', 'asoc/fix/nau8825' and 'asoc/fix/rt5616' into asoc-linus

It was a simple idea -- save IPv6 configured addresses on a link down
so that IPv6 behaves similar to IPv4. As always the devil is in the
details and the IPv6 stack as too many behavioral differences from IPv4
making the simple idea more complicated than it needs to be.

The current implementation for keeping IPv6 addresses can panic or spit
out a warning in one of many paths:

1. IPv6 route gets an IPv4 route as its 'next' which causes a panic in
   rt6_fill_node while handling a route dump request.

2. rt->dst.obsolete is set to DST_OBSOLETE_DEAD hitting the WARN_ON in
   fib6_del

3. Panic in fib6_purge_rt because rt6i_ref count is not 1.

The root cause of all these is references related to the host route for
an address that is retained.

So, this patch deletes the host route every time the ifdown loop runs.
Since the host route is deleted and will be re-generated an up there is
no longer a need for the l3mdev fix up. On the 'admin up' side move
addrconf_permanent_addr into the NETDEV_UP event handling so that it
runs only once versus on UP and CHANGE events.

All of the current panics and warnings appear to be related to
addresses on the loopback device, but given the catastrophic nature when
a bug is triggered this patch takes the conservative approach and evicts
all host routes rather than trying to determine when it can be re-used
and when it can not. That can be a later optimizaton if desired.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts commit 841645b5.

Ok, this puts the feature back.  I've decided to apply David A.'s
bug fix and run with that rather than make everyone wait another
whole release for this feature.
Signed-off-by: David S. Miller <davem@davemloft.net>

The bug in a workqueue leads to a stalled IO request in MQ ctx->rq_list
with the following backtrace:

[  601.347452] INFO: task kworker/u129:5:1636 blocked for more than 120 seconds.
[  601.347574]       Tainted: G           O    4.4.5-1-storage+ #6
[  601.347651] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  601.348142] kworker/u129:5  D ffff880803077988     0  1636      2 0x00000000
[  601.348519] Workqueue: ibnbd_server_fileio_wq ibnbd_dev_file_submit_io_worker [ibnbd_server]
[  601.348999]  ffff880803077988 ffff88080466b900 ffff8808033f9c80 ffff880803078000
[  601.349662]  ffff880807c95000 7fffffffffffffff ffffffff815b0920 ffff880803077ad0
[  601.350333]  ffff8808030779a0 ffffffff815b01d5 0000000000000000 ffff880803077a38
[  601.350965] Call Trace:
[  601.351203]  [<ffffffff815b0920>] ? bit_wait+0x60/0x60
[  601.351444]  [<ffffffff815b01d5>] schedule+0x35/0x80
[  601.351709]  [<ffffffff815b2dd2>] schedule_timeout+0x192/0x230
[  601.351958]  [<ffffffff812d43f7>] ? blk_flush_plug_list+0xc7/0x220
[  601.352208]  [<ffffffff810bd737>] ? ktime_get+0x37/0xa0
[  601.352446]  [<ffffffff815b0920>] ? bit_wait+0x60/0x60
[  601.352688]  [<ffffffff815af784>] io_schedule_timeout+0xa4/0x110
[  601.352951]  [<ffffffff815b3a4e>] ? _raw_spin_unlock_irqrestore+0xe/0x10
[  601.353196]  [<ffffffff815b093b>] bit_wait_io+0x1b/0x70
[  601.353440]  [<ffffffff815b056d>] __wait_on_bit+0x5d/0x90
[  601.353689]  [<ffffffff81127bd0>] wait_on_page_bit+0xc0/0xd0
[  601.353958]  [<ffffffff81096db0>] ? autoremove_wake_function+0x40/0x40
[  601.354200]  [<ffffffff81127cc4>] __filemap_fdatawait_range+0xe4/0x140
[  601.354441]  [<ffffffff81127d34>] filemap_fdatawait_range+0x14/0x30
[  601.354688]  [<ffffffff81129a9f>] filemap_write_and_wait_range+0x3f/0x70
[  601.354932]  [<ffffffff811ced3b>] blkdev_fsync+0x1b/0x50
[  601.355193]  [<ffffffff811c82d9>] vfs_fsync_range+0x49/0xa0
[  601.355432]  [<ffffffff811cf45a>] blkdev_write_iter+0xca/0x100
[  601.355679]  [<ffffffff81197b1a>] __vfs_write+0xaa/0xe0
[  601.355925]  [<ffffffff81198379>] vfs_write+0xa9/0x1a0
[  601.356164]  [<ffffffff811c59d8>] kernel_write+0x38/0x50

The underlying device is a null_blk, with default parameters:

  queue_mode    = MQ
  submit_queues = 1

Verification that nullb0 has something inflight:

root@pserver8:~# cat /sys/block/nullb0/inflight
       0        1
root@pserver8:~# find /sys/block/nullb0/mq/0/cpu* -name rq_list -print -exec cat {} \;
...
/sys/block/nullb0/mq/0/cpu2/rq_list
CTX pending:
        ffff8838038e2400
...

During debug it became clear that stalled request is always inserted in
the rq_list from the following path:

   save_stack_trace_tsk + 34
   blk_mq_insert_requests + 231
   blk_mq_flush_plug_list + 281
   blk_flush_plug_list + 199
   wait_on_page_bit + 192
   __filemap_fdatawait_range + 228
   filemap_fdatawait_range + 20
   filemap_write_and_wait_range + 63
   blkdev_fsync + 27
   vfs_fsync_range + 73
   blkdev_write_iter + 202
   __vfs_write + 170
   vfs_write + 169
   kernel_write + 56

So blk_flush_plug_list() was called with from_schedule == true.

If from_schedule is true, that means that finally blk_mq_insert_requests()
offloads execution of __blk_mq_run_hw_queue() and uses kblockd workqueue,
i.e. it calls kblockd_schedule_delayed_work_on().

That means, that we race with another CPU, which is about to execute
__blk_mq_run_hw_queue() work.

Further debugging shows the following traces from different CPUs:

  CPU#0                                  CPU#1
  ----------------------------------     -------------------------------
  reqeust A inserted
  STORE hctx->ctx_map[0] bit marked
  kblockd_schedule...() returns 1
  <schedule to kblockd workqueue>
                                         request B inserted
                                         STORE hctx->ctx_map[1] bit marked
                                         kblockd_schedule...() returns 0
  *** WORK PENDING bit is cleared ***
  flush_busy_ctxs() is executed, but
  bit 1, set by CPU#1, is not observed

As a result request B pended forever.

This behaviour can be explained by speculative LOAD of hctx->ctx_map on
CPU#0, which is reordered with clear of PENDING bit and executed _before_
actual STORE of bit 1 on CPU#1.

The proper fix is an explicit full barrier <mfence>, which guarantees
that clear of PENDING bit is to be executed before all possible
speculative LOADS or STORES inside actual work function.
Signed-off-by: Roman Pen <roman.penyaev@profitbricks.com>
Cc: Gioh Kim <gi-oh.kim@profitbricks.com>
Cc: Michael Wang <yun.wang@profitbricks.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Tejun Heo <tj@kernel.org>

Currently ARM CPUs DT bindings allows different enable-method value for
PSCI based systems. On ARM 64-bit this property is required and must be
"psci" while on ARM 32-bit systems this property is optional and must
be "arm,psci" if present.

However, "arm,psci" has always been the compatible string for the PSCI
node, and was never intended to be the enable-method. So this is a bug
in the binding and not a deliberate attempt at specifying 32-bit
differently.

This is problematic if 32-bit OS is run on 64-bit system which has
"psci" as enable-method rather than the expected "arm,psci".

So let's unify the value into "psci" and remove support for "arm,psci"
before it finds any users.
Reported-by: Soby Mathew <Soby.Mathew@arm.com>
Cc: Rob Herring <robh+dt@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The recent bug report suggests that BCLK setup for i915 HSW/BDW needs
to be updated at each HDMI hotplug, not only at initialization and
resume.  That is, we need to update HSW_EM4 and HSW_EM5 registers at
ELD notification, too.  Otherwise the HDMI audio may be out of sync
and played in a wrong pitch.

However, the HDA codec driver has no access to the controller
registers, and currently the code managing these registers is in
hda_intel.c, i.e. local to the controller driver.  For allowing the
explicit BCLK update from the codec driver, as in this patch, the
former haswell_set_bclk() in hda_intel.c is moved to hdac_i915.c and
exposed as snd_hdac_i915_set_bclk().  This is called from both the HDA
controller driver and intel_pin_eld_notify() in HDMI codec driver.

Along with this change, snd_hdac_get_display_clk() gets dropped as
it's no longer used.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91410
Cc: <stable@vger.kernel.org> # v4.5+
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Fixes audio output on a ThinkPad X260, when using Lenovo CES 2013
docking station series (basic, pro, ultra).
Signed-off-by: Conrad Kostecki <ck+linuxkernel@bl4ckb0x.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

When multiple skb are TX-completed in a row, we might incorrectly keep
a timestamp of a prior skb and cause extra work.

Fixes: ec693d47 ("net/mlx4_en: Add HW timestamping (TS) support")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Ivan Babrou <ivan@cloudflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ip6_route_output looks into different fields in the passed flowi6 structure,
yet cxgbi passes garbage in nearly all those fields. Zero the structure out
first.

Fixes: fc8d0590 ("libcxgbi: Add ipv6 api to driver")
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Hello,

So, this ended up a lot simpler than I originally expected.  I tested
it lightly and it seems to work fine.  Petr, can you please test these
two patches w/o the lru drain drop patch and see whether the problem
is gone?

Thanks.
------ 8< ------
If charge moving is used, memcg performs relabeling of the affected
pages from its ->attach callback which is called under both
cgroup_threadgroup_rwsem and thus can't create new kthreads.  This is
fragile as various operations may depend on workqueues making forward
progress which relies on the ability to create new kthreads.

There's no reason to perform charge moving from ->attach which is deep
in the task migration path.  Move it to ->post_attach which is called
after the actual migration is finished and cgroup_threadgroup_rwsem is
dropped.

* move_charge_struct->mm is added and ->can_attach is now responsible
  for pinning and recording the target mm.  mem_cgroup_clear_mc() is
  updated accordingly.  This also simplifies mem_cgroup_move_task().

* mem_cgroup_move_task() is now called from ->post_attach instead of
  ->attach.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@kernel.org>
Debugged-and-tested-by: Petr Mladek <pmladek@suse.com>
Reported-by: Cyril Hrubis <chrubis@suse.cz>
Reported-by: Johannes Weiner <hannes@cmpxchg.org>
Fixes: 1ed13287 ("sched, cgroup: replace signal_struct->group_rwsem with a global percpu_rwsem")
Cc: <stable@vger.kernel.org> # 4.4+

Since e93ad19d ("cpuset: make mm migration asynchronous"), cpuset
kicks off asynchronous NUMA node migration if necessary during task
migration and flushes it from cpuset_post_attach_flush() which is
called at the end of __cgroup_procs_write().  This is to avoid
performing migration with cgroup_threadgroup_rwsem write-locked which
can lead to deadlock through dependency on kworker creation.

memcg has a similar issue with charge moving, so let's convert it to
an official callback rather than the current one-off cpuset specific
function.  This patch adds cgroup_subsys->post_attach callback and
makes cpuset register cpuset_post_attach_flush() as its ->post_attach.

The conversion is mostly one-to-one except that the new callback is
called under cgroup_mutex.  This is to guarantee that no other
migration operations are started before ->post_attach callbacks are
finished.  cgroup_mutex is one of the outermost mutex in the system
and has never been and shouldn't be a problem.  We can add specialized
synchronization around __cgroup_procs_write() but I don't think
there's any noticeable benefit.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: <stable@vger.kernel.org> # 4.4+ prerequisite for the next patch

This reverts the following three commits:

70af921d
799977d9
f1705ec1

The feature was ill conceived, has terrible semantics, and has added
nothing but regressions to the already fragile ipv6 stack.

Fixes: f1705ec1 ("net: ipv6: Make address flushing on ifdown optional")
Signed-off-by: David S. Miller <davem@davemloft.net>

Starting the kernel client with cephx disabled and then enabling cephx
and restarting userspace daemons can result in a crash:

    [262671.478162] BUG: unable to handle kernel paging request at ffffebe000000000
    [262671.531460] IP: [<ffffffff811cd04a>] kfree+0x5a/0x130
    [262671.584334] PGD 0
    [262671.635847] Oops: 0000 [#1] SMP
    [262672.055841] CPU: 22 PID: 2961272 Comm: kworker/22:2 Not tainted 4.2.0-34-generic #39~14.04.1-Ubuntu
    [262672.162338] Hardware name: Dell Inc. PowerEdge R720/068CDY, BIOS 2.4.3 07/09/2014
    [262672.268937] Workqueue: ceph-msgr con_work [libceph]
    [262672.322290] task: ffff88081c2d0dc0 ti: ffff880149ae8000 task.ti: ffff880149ae8000
    [262672.428330] RIP: 0010:[<ffffffff811cd04a>]  [<ffffffff811cd04a>] kfree+0x5a/0x130
    [262672.535880] RSP: 0018:ffff880149aeba58  EFLAGS: 00010286
    [262672.589486] RAX: 000001e000000000 RBX: 0000000000000012 RCX: ffff8807e7461018
    [262672.695980] RDX: 000077ff80000000 RSI: ffff88081af2be04 RDI: 0000000000000012
    [262672.803668] RBP: ffff880149aeba78 R08: 0000000000000000 R09: 0000000000000000
    [262672.912299] R10: ffffebe000000000 R11: ffff880819a60e78 R12: ffff8800aec8df40
    [262673.021769] R13: ffffffffc035f70f R14: ffff8807e5b138e0 R15: ffff880da9785840
    [262673.131722] FS:  0000000000000000(0000) GS:ffff88081fac0000(0000) knlGS:0000000000000000
    [262673.245377] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
    [262673.303281] CR2: ffffebe000000000 CR3: 0000000001c0d000 CR4: 00000000001406e0
    [262673.417556] Stack:
    [262673.472943]  ffff880149aeba88 ffff88081af2be04 ffff8800aec8df40 ffff88081af2be04
    [262673.583767]  ffff880149aeba98 ffffffffc035f70f ffff880149aebac8 ffff8800aec8df00
    [262673.694546]  ffff880149aebac8 ffffffffc035c89e ffff8807e5b138e0 ffff8805b047f800
    [262673.805230] Call Trace:
    [262673.859116]  [<ffffffffc035f70f>] ceph_x_destroy_authorizer+0x1f/0x50 [libceph]
    [262673.968705]  [<ffffffffc035c89e>] ceph_auth_destroy_authorizer+0x3e/0x60 [libceph]
    [262674.078852]  [<ffffffffc0352805>] put_osd+0x45/0x80 [libceph]
    [262674.134249]  [<ffffffffc035290e>] remove_osd+0xae/0x140 [libceph]
    [262674.189124]  [<ffffffffc0352aa3>] __reset_osd+0x103/0x150 [libceph]
    [262674.243749]  [<ffffffffc0354703>] kick_requests+0x223/0x460 [libceph]
    [262674.297485]  [<ffffffffc03559e2>] ceph_osdc_handle_map+0x282/0x5e0 [libceph]
    [262674.350813]  [<ffffffffc035022e>] dispatch+0x4e/0x720 [libceph]
    [262674.403312]  [<ffffffffc034bd91>] try_read+0x3d1/0x1090 [libceph]
    [262674.454712]  [<ffffffff810ab7c2>] ? dequeue_entity+0x152/0x690
    [262674.505096]  [<ffffffffc034cb1b>] con_work+0xcb/0x1300 [libceph]
    [262674.555104]  [<ffffffff8108fb3e>] process_one_work+0x14e/0x3d0
    [262674.604072]  [<ffffffff810901ea>] worker_thread+0x11a/0x470
    [262674.652187]  [<ffffffff810900d0>] ? rescuer_thread+0x310/0x310
    [262674.699022]  [<ffffffff810957a2>] kthread+0xd2/0xf0
    [262674.744494]  [<ffffffff810956d0>] ? kthread_create_on_node+0x1c0/0x1c0
    [262674.789543]  [<ffffffff817bd81f>] ret_from_fork+0x3f/0x70
    [262674.834094]  [<ffffffff810956d0>] ? kthread_create_on_node+0x1c0/0x1c0

What happens is the following:

    (1) new MON session is established
    (2) old "none" ac is destroyed
    (3) new "cephx" ac is constructed
    ...
    (4) old OSD session (w/ "none" authorizer) is put
          ceph_auth_destroy_authorizer(ac, osd->o_auth.authorizer)

osd->o_auth.authorizer in the "none" case is just a bare pointer into
ac, which contains a single static copy for all services.  By the time
we get to (4), "none" ac, freed in (2), is long gone.  On top of that,
a new vtable installed in (3) points us at ceph_x_destroy_authorizer(),
so we end up trying to destroy a "none" authorizer with a "cephx"
destructor operating on invalid memory!

To fix this, decouple authorizer destruction from ac and do away with
a single static "none" authorizer by making a copy for each OSD or MDS
session.  Authorizers themselves are independent of ac and so there is
no reason for destroy_authorizer() to be an ac op.  Make it an op on
the authorizer itself by turning ceph_authorizer into a real struct.

Fixes: http://tracker.ceph.com/issues/15447Reported-by: Alan Zhang <alan.zhang@linux.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Sage Weil <sage@redhat.com>