- 23 Jun, 2019 19 commits
-
-
Dmitry Torokhov authored
Instead of open-coding conversion from/to little-endian, let's use proper accessors. Tested-by: Tim Schumacher <timschumi@gmx.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Dmitry Torokhov authored
Transport initialization code now deals mostly with transport-specific data, so we can drop couple of temporary variables. Tested-by: Tim Schumacher <timschumi@gmx.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Dmitry Torokhov authored
It is not needed anymore as behavior is controlled by the transport operations set up for given device. Tested-by: Tim Schumacher <timschumi@gmx.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Dmitry Torokhov authored
USB transport has to use cache line-aligned buffers for transfers to avoid DMA issues; serio doe snot have such restrictions. Let's move "data_in" buffer from main driver structure into transport modules and make sure USB requirements are respected. Tested-by: Tim Schumacher <timschumi@gmx.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Dmitry Torokhov authored
We want to move buffer handling into transport layers as the properties of buffers (DMA-safety, alignment, etc) are different for different transports. To allow this, let's allow caller to specify their own buffers for the results of iforce_get_id_packet() and let transport drivers to figure what buffers they need to use for transfers. Tested-by: Tim Schumacher <timschumi@gmx.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Dmitry Torokhov authored
It is excessive to check if device is fully initialized in iforce_process_packet(), as for USB-conected devices we do not start collecting reports until the device is fully initialized. Let's change serio transport code to not call iforce_process_packet() until device initialization is done. Tested-by: Tim Schumacher <timschumi@gmx.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Dmitry Torokhov authored
Signalling command completion from iforce_process_packet() does not make sense, as not all transport use the same data path for both commands and motion data form the device, that is why USB code already has to signal command completion iforce_usb_out(). Let's move signalling completion into individual transport modules. Tested-by: Tim Schumacher <timschumi@gmx.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Dmitry Torokhov authored
Current code combines packet type and data length into single argument to iforce_process_packet() and then has to untangle it. It is much clearer to simply use separate arguments. Tested-by: Tim Schumacher <timschumi@gmx.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Dmitry Torokhov authored
This makes code clearer a bit. Tested-by: Tim Schumacher <timschumi@gmx.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Dmitry Torokhov authored
According to our coding style case labels in switch statements should be aligned with the switch keyword. Tested-by: Tim Schumacher <timschumi@gmx.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Dmitry Torokhov authored
When working with USB devices we need to use DMA-safe buffers, and iforce->edata is not one. Let's rework the code to allocate temporary buffer (iforce_get_id() is called only during initialization so there is no reason to have permanent buffer) and use it. While at it, let's utilize usb_control_msg() API which simplifies code. Tested-by: Tim Schumacher <timschumi@gmx.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Dmitry Torokhov authored
Now that we have moved enough transport details into separate source files we can change them into transport modules so that they are only loaded when needed. Tested-by: Tim Schumacher <timschumi@gmx.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Dmitry Torokhov authored
This moves transport-specific data from main iforce structure into transport modules. Tested-by: Tim Schumacher <timschumi@gmx.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Dmitry Torokhov authored
Note that the parent device for the USB-connected controllers is now USB interface instead of USB device. Tested-by: Tim Schumacher <timschumi@gmx.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Dmitry Torokhov authored
Add start_io() and stop_io() transport methods so that core does not have to know the details. Tested-by: Tim Schumacher <timschumi@gmx.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Dmitry Torokhov authored
Continue teasing apart protocol-specific bits from core into transport modules. This time move RS232-specific command completion handling from core to iforce-serio module. Tested-by: Tim Schumacher <timschumi@gmx.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Dmitry Torokhov authored
To avoid #ifdef-ing out parts of the code and having conditionals in normal control flow, let's define "get_id" transport method and move implementation into respective transport modules. Tested-by: Tim Schumacher <timschumi@gmx.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Dmitry Torokhov authored
In order to tease apart the driver into core and transport modules, let's introduce transport operations and make "xmit" the very first one such operation. Tested-by: Tim Schumacher <timschumi@gmx.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Dmitry Torokhov authored
The kernel is supposed to handle multiple devices, static flags in packet handling code will never work. Tested-by: Tim Schumacher <timschumi@gmx.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 06 May, 2019 1 commit
-
-
Linus Torvalds authored
-
- 05 May, 2019 5 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Ingo Molnar: "I'd like to apologize for this very late pull request: I was dithering through the week whether to send the fixes, and then yesterday Jiri's crash fix for a regression introduced in this cycle clearly marked perf/urgent as 'must merge now'. Most of the commits are tooling fixes, plus there's three kernel fixes via four commits: - race fix in the Intel PEBS code - fix an AUX bug and roll back a previous attempt - fix AMD family 17h generic HW cache-event perf counters The largest diffstat contribution comes from the AMD fix - a new event table is introduced, which is a fairly low risk change but has a large linecount" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel: Fix race in intel_pmu_disable_event() perf/x86/intel/pt: Remove software double buffering PMU capability perf/ring_buffer: Fix AUX software double buffering perf tools: Remove needless asm/unistd.h include fixing build in some places tools arch uapi: Copy missing unistd.h headers for arc, hexagon and riscv tools build: Add -ldl to the disassembler-four-args feature test perf cs-etm: Always allocate memory for cs_etm_queue::prev_packet perf cs-etm: Don't check cs_etm_queue::prev_packet validity perf report: Report OOM in status line in the GTK UI perf bench numa: Add define for RUSAGE_THREAD if not present tools lib traceevent: Change tag string for error perf annotate: Fix build on 32 bit for BPF annotation tools uapi x86: Sync vmx.h with the kernel perf bpf: Return value with unlocking in perf_env__find_btf() MAINTAINERS: Include vendor specific files under arch/*/events/* perf/x86/amd: Update generic hardware cache events for Family 17h
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fix from Ingo Molnar: "Fix a kobject memory leak in the cpufreq code" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/cpufreq: Fix kobject memleak
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fix from Ingo Molnar: "Disable function tracing during early SME setup to fix a boot crash on SME-enabled kernels running distro kernels (some of which have function tracing enabled)" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm/mem_encrypt: Disable all instrumentation for early SME setup
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull vfs fixes from Al Viro: - a couple of ->i_link use-after-free fixes - regression fix for wrong errno on absent device name in mount(2) (this cycle stuff) - ancient UFS braino in large GID handling on Solaris UFS images (bogus cut'n'paste from large UID handling; wrong field checked to decide whether we should look at old (16bit) or new (32bit) field) * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: ufs: fix braino in ufs_get_inode_gid() for solaris UFS flavour Abort file_remove_privs() for non-reg. files [fix] get rid of checking for absent device name in vfs_get_tree() apparmorfs: fix use-after-free on symlink traversal securityfs: fix use-after-free on symlink traversal
-
Jiri Olsa authored
New race in x86_pmu_stop() was introduced by replacing the atomic __test_and_clear_bit() of cpuc->active_mask by separate test_bit() and __clear_bit() calls in the following commit: 3966c3fe ("x86/perf/amd: Remove need to check "running" bit in NMI handler") The race causes panic for PEBS events with enabled callchains: BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 ... RIP: 0010:perf_prepare_sample+0x8c/0x530 Call Trace: <NMI> perf_event_output_forward+0x2a/0x80 __perf_event_overflow+0x51/0xe0 handle_pmi_common+0x19e/0x240 intel_pmu_handle_irq+0xad/0x170 perf_event_nmi_handler+0x2e/0x50 nmi_handle+0x69/0x110 default_do_nmi+0x3e/0x100 do_nmi+0x11a/0x180 end_repeat_nmi+0x16/0x1a RIP: 0010:native_write_msr+0x6/0x20 ... </NMI> intel_pmu_disable_event+0x98/0xf0 x86_pmu_stop+0x6e/0xb0 x86_pmu_del+0x46/0x140 event_sched_out.isra.97+0x7e/0x160 ... The event is configured to make samples from PEBS drain code, but when it's disabled, we'll go through NMI path instead, where data->callchain will not get allocated and we'll crash: x86_pmu_stop test_bit(hwc->idx, cpuc->active_mask) intel_pmu_disable_event(event) { ... intel_pmu_pebs_disable(event); ... EVENT OVERFLOW -> <NMI> intel_pmu_handle_irq handle_pmi_common TEST PASSES -> test_bit(bit, cpuc->active_mask)) perf_event_overflow perf_prepare_sample { ... if (!(sample_type & __PERF_SAMPLE_CALLCHAIN_EARLY)) data->callchain = perf_callchain(event, regs); CRASH -> size += data->callchain->nr; } </NMI> ... x86_pmu_disable_event(event) } __clear_bit(hwc->idx, cpuc->active_mask); Fixing this by disabling the event itself before setting off the PEBS bit. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Arcari <darcari@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Lendacky Thomas <Thomas.Lendacky@amd.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Fixes: 3966c3fe ("x86/perf/amd: Remove need to check "running" bit in NMI handler") Link: http://lkml.kernel.org/r/20190504151556.31031-1-jolsa@kernel.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>
-
- 04 May, 2019 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fix from Michael Ellerman: "One regression fix. Changes we merged to STRICT_KERNEL_RWX on 32-bit were causing crashes under load on some machines depending on memory layout. Thanks to Christophe Leroy" * tag 'powerpc-5.1-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/32s: Fix BATs setting with CONFIG_STRICT_KERNEL_RWX
-
- 03 May, 2019 8 commits
-
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull KVM fixes from Paolo Bonzini: - PPC and ARM bugfixes from submaintainers - Fix old Windows versions on AMD (recent regression) - Fix old Linux versions on processors without EPT - Fixes for LAPIC timer optimizations * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (21 commits) KVM: nVMX: Fix size checks in vmx_set_nested_state KVM: selftests: make hyperv_cpuid test pass on AMD KVM: lapic: Check for in-kernel LAPIC before deferencing apic pointer KVM: fix KVM_CLEAR_DIRTY_LOG for memory slots of unaligned size x86/kvm/mmu: reset MMU context when 32-bit guest switches PAE KVM: x86: Whitelist port 0x7e for pre-incrementing %rip Documentation: kvm: fix dirty log ioctl arch lists KVM: VMX: Move RSB stuffing to before the first RET after VM-Exit KVM: arm/arm64: Don't emulate virtual timers on userspace ioctls kvm: arm: Skip stage2 huge mappings for unaligned ipa backed by THP KVM: arm/arm64: Ensure vcpu target is unset on reset failure KVM: lapic: Convert guest TSC to host time domain if necessary KVM: lapic: Allow user to disable adaptive tuning of timer advancement KVM: lapic: Track lapic timer advance per vCPU KVM: lapic: Disable timer advancement if adaptive tuning goes haywire x86: kvm: hyper-v: deal with buggy TLB flush requests from WS2012 KVM: x86: Consider LAPIC TSC-Deadline timer expired if deadline too short KVM: PPC: Book3S: Protect memslots while validating user address KVM: PPC: Book3S HV: Perserve PSSCR FAKE_SUSPEND bit on guest exit KVM: arm/arm64: vgic-v3: Retire pending interrupts on disabling LPIs ...
-
Linus Torvalds authored
Merge branch 'i2c/for-current-fixed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "I2C driver bugfixes and a MAINTAINERS update for you" * 'i2c/for-current-fixed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: Prevent runtime suspend of adapter when Host Notify is required i2c: synquacer: fix enumeration of slave devices MAINTAINERS: friendly takeover of i2c-gpio driver i2c: designware: ratelimit 'transfer when suspended' errors i2c: imx: correct the method of getting private data in notifier_call
-
git://anongit.freedesktop.org/drm/drmLinus Torvalds authored
Pull drm fix from Dave Airlie: "Just a single qxl revert" * tag 'drm-fixes-2019-05-03' of git://anongit.freedesktop.org/drm/drm: Revert "drm/qxl: drop prime import/export callbacks"
-
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/clk/linuxLinus Torvalds authored
Pull clk fixes from Stephen Boyd: "Two fixes for the NKMP clks on Allwinner SoCs, a locking fix for clkdev where we forgot to hold a lock while iterating a list that can change, and finally a build fix that adds some stubs for clk APIs that are used by devfreq drivers on platforms without the clk APIs" * tag 'clk-fixes-for-linus' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: Add missing stubs for a few functions clkdev: Hold clocks_mutex while iterating clocks list clk: sunxi-ng: nkmp: Explain why zero width check is needed clk: sunxi-ng: nkmp: Avoid GENMASK(-1, 0)
-
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "A few stable fixes at this round. The USB Line6 audio fixes are a bit large, but they are rather trivial and pretty much device-specific, so should be safe to apply at this late stage. Ditto for other HD-audio quirks" * tag 'sound-5.1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda/realtek - Apply the fixup for ASUS Q325UAR ALSA: line6: use dynamic buffers ALSA: hda/realtek - Fixed Dell AIO speaker noise ALSA: hda/realtek - Add new Dell platform for headset mode
-
Alexander Shishkin authored
Now that all AUX allocations are high-order by default, the software double buffering PMU capability doesn't make sense any more, get rid of it. In case some PMUs choose to opt out, we can re-introduce it. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: adrian.hunter@intel.com Link: http://lkml.kernel.org/r/20190503085536.24119-3-alexander.shishkin@linux.intel.comSigned-off-by: Ingo Molnar <mingo@kernel.org>
-
Alexander Shishkin authored
This recent commit: 5768402f ("perf/ring_buffer: Use high order allocations for AUX buffers optimistically") overlooked the fact that the previous one page granularity of the AUX buffer provided an implicit double buffering capability to the PMU driver, which went away when the entire buffer became one high-order page. Always make the full-trace mode AUX allocation at least two-part to preserve the previous behavior and allow the implicit double buffering to continue. Reported-by: Ammy Yi <ammy.yi@intel.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: adrian.hunter@intel.com Fixes: 5768402f ("perf/ring_buffer: Use high order allocations for AUX buffers optimistically") Link: http://lkml.kernel.org/r/20190503085536.24119-2-alexander.shishkin@linux.intel.comSigned-off-by: Ingo Molnar <mingo@kernel.org>
-
Ingo Molnar authored
Merge tag 'perf-urgent-for-mingo-5.1-20190502' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fixes from Arnaldo Carvalho de Melo: tools UAPI: Arnaldo Carvalho de Melo: - Sync x86's vmx.h with the kernel. - Copy missing unistd.h headers for arc, hexagon and riscv, fixing a reported build regression on the ARC 32-bit architecture. perf bench numa: Arnaldo Carvalho de Melo: - Add define for RUSAGE_THREAD if not present, fixing the build on the ARC architecture when only zlib and libnuma are present. perf BPF: Arnaldo Carvalho de Melo: - The disassembler-four-args feature test needs -ldl on distros such as Mageia 7. Bo YU: - Fix unlocking on success in perf_env__find_btf(), detected with the coverity tool. libtraceevent: Leo Yan: - Change misleading hard coded 'trace-cmd' string in error messages. ARM hardware tracing: Leo Yan: - Always allocate memory for cs_etm_queue::prev_packet, fixing a segfault when processing CoreSight perf data. perf annotate: Thadeu Lima de Souza Cascardo: - Fix build on 32 bit for BPF. perf report: Thomas Richter: - Report OOM in status line in the GTK UI. core libs: - Remove needless asm/unistd.h that, used with sys/syscall.h ended up redefining the syscalls defines in environments such as the ARC arch when using uClibc. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
-
- 02 May, 2019 6 commits
-
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
- One revert for QXL for a DRI3 breakage Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190502122529.hguztj3kncaixe3d@flea
-
Arnaldo Carvalho de Melo authored
We were including sys/syscall.h and asm/unistd.h, since sys/syscall.h includes asm/unistd.h, sometimes this leads to the redefinition of defines, breaking the build. Noticed on ARC with uCLibc. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Arnaldo Carvalho de Melo <arnaldo.melo@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Rich Felker <dalias@libc.org> Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com> Link: https://lkml.kernel.org/n/tip-xjpf80o64i2ko74aj2jih0qg@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Arnaldo Carvalho de Melo authored
Since those were introduced in: c8ce48f0 ("asm-generic: Make time32 syscall numbers optional") But when the asm-generic/unistd.h was sync'ed with tools/ in: 1a787fc5 ("tools headers uapi: Sync copy of asm-generic/unistd.h with the kernel sources") I forgot to copy the files for the architectures that define __ARCH_WANT_TIME32_SYSCALLS, so the perf build was breaking there, as reported by Vineet Gupta for the ARC architecture. After updating my ARC container to use the glibc based toolchain + cross building libnuma, zlib and elfutils, I finally managed to reproduce the problem and verify that this now is fixed and will not regress as will be tested before each pull req sent upstream. Reported-by: Vineet Gupta <Vineet.Gupta1@synopsys.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Jiri Olsa <jolsa@kernel.org> CC: linux-snps-arc@lists.infradead.org Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/r/20190426193531.GC28586@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Arnaldo Carvalho de Melo authored
Thomas Backlund reported that the perf build was failing on the Mageia 7 distro, that is because it uses: cat /tmp/build/perf/feature/test-disassembler-four-args.make.output /usr/bin/ld: /usr/lib64/libbfd.a(plugin.o): in function `try_load_plugin': /home/iurt/rpmbuild/BUILD/binutils-2.32/objs/bfd/../../bfd/plugin.c:243: undefined reference to `dlopen' /usr/bin/ld: /home/iurt/rpmbuild/BUILD/binutils-2.32/objs/bfd/../../bfd/plugin.c:271: undefined reference to `dlsym' /usr/bin/ld: /home/iurt/rpmbuild/BUILD/binutils-2.32/objs/bfd/../../bfd/plugin.c:256: undefined reference to `dlclose' /usr/bin/ld: /home/iurt/rpmbuild/BUILD/binutils-2.32/objs/bfd/../../bfd/plugin.c:246: undefined reference to `dlerror' as we allow dynamic linking and loading Mageia 7 uses these linker flags: $ rpm --eval %ldflags -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags So add -ldl to this feature LDFLAGS. Reported-by: Thomas Backlund <tmb@mageia.org> Tested-by: Thomas Backlund <tmb@mageia.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Song Liu <songliubraving@fb.com> Link: https://lkml.kernel.org/r/20190501173158.GC21436@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Leo Yan authored
Robert Walker reported a segmentation fault is observed when process CoreSight trace data; this issue can be easily reproduced by the command 'perf report --itrace=i1000i' for decoding tracing data. If neither the 'b' flag (synthesize branches events) nor 'l' flag (synthesize last branch entries) are specified to option '--itrace', cs_etm_queue::prev_packet will not been initialised. After merging the code to support exception packets and sample flags, there introduced a number of uses of cs_etm_queue::prev_packet without checking whether it is valid, for these cases any accessing to uninitialised prev_packet will cause crash. As cs_etm_queue::prev_packet is used more widely now and it's already hard to follow which functions have been called in a context where the validity of cs_etm_queue::prev_packet has been checked, this patch always allocates memory for cs_etm_queue::prev_packet. Reported-by: Robert Walker <robert.walker@arm.com> Suggested-by: Robert Walker <robert.walker@arm.com> Signed-off-by: Leo Yan <leo.yan@linaro.org> Tested-by: Robert Walker <robert.walker@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Suzuki K Poulouse <suzuki.poulose@arm.com> Cc: linux-arm-kernel@lists.infradead.org Fixes: 7100b12c ("perf cs-etm: Generate branch sample for exception packet") Fixes: 24fff5eb ("perf cs-etm: Avoid stale branch samples when flush packet") Link: http://lkml.kernel.org/r/20190428083228.20246-1-leo.yan@linaro.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Leo Yan authored
Since cs_etm_queue::prev_packet is allocated for all cases, it will never be NULL pointer; now validity checking prev_packet is pointless, remove all of them. Signed-off-by: Leo Yan <leo.yan@linaro.org> Tested-by: Robert Walker <robert.walker@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Suzuki K Poulouse <suzuki.poulose@arm.com> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/20190428083228.20246-2-leo.yan@linaro.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-