The configuration index port of the vt1211 can be accessed at two
different addresses 0x2e or 0x4e, depending on pin strappings. This
patch adds support to scan both addresses during module
initialization.
Signed-off-by: Juerg Haefliger <juergh@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

I think I introduced a potential race condition bug with commit
51c997d8. I didn't realize it
back then, but platform_device_put and platform_device_release
both appear to free the platform data associated with the device.
This makes an explicit kfree redundant at best, and maybe even
racy, as it might occur while someone still holds a reference
to the platform device.
Signed-off-by: Jean Delvare <khali@linux-fr.org>

Fix an unused return value warning for the abituguru driver.
Also make sure the sysfs files are created before we register with
the hwmon class, and delete the sysfs files on driver removal.
Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

Signed-off-by: Corentin Labbe <corentin.labbe@geomatys.fr>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

Signed-off-by: David Hubbard <david.c.hubbard@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

Subsystem infrastructure should normally register with "subsys_initcall",
so that it's available to drivers that may need to initialize early.

This patch updates "hwmon" to do so.  It's common for embedded systems to
have multifunction chips with hardware monitoring interfaces, and to have
those chips be used during system bringup ... before a normal "module_init"
would kick, or maybe just linked so they'd init before hwmon.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

This fixes a potential broken reference.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

Cleanup a bogus legacy comment that has been replicated to many
hardware monitoring drivers.
Signed-off-by: Jean Delvare <khali@linux-fr.org>

Many hardware monitoring drivers use two different mutexes, one to
protect their per-device data structure, and one to protect the
access to the device registers. These mutexes are essentially
redundant, as the drivers are transfering values between the device
registers and the data cache, so they almost always end up holding
both mutexes at the same time. Using a single mutex will make the
code more simple and faster.

I am changing only two of the affected drivers here, the authors
of the other affected drivers are welcome to submit similar patches
if they want.
Signed-off-by: Jean Delvare <khali@linux-fr.org>

Signed-off-by: Jean Delvare <khali@linux-fr.org>

Let the user select the base PWM frequency when using the it87
hardware monitoring driver. Different frequencies can give better
control on some fans.

Also update the documentation to mention the PWM frequency control
files, with misc cleanups to the PWM section.
Signed-off-by: Jean Delvare <khali@linux-fr.org>

* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband:
  IB/mthca: Always fill MTTs from CPU
  IB/mthca: Merge MR and FMR space on 64-bit systems
  IB/mthca: Fix access to MTT and MPT tables on non-cache-coherent CPUs
  IB/mthca: Give reserved MTTs a separate cache line
  IB/mthca: Fix reserved MTTs calculation on mem-free HCAs
  RDMA/cxgb3: Add driver for Chelsio T3 RNIC
  IB: Remove redundant "_wq" from workqueue names
  RDMA/cma: Increment port number after close to avoid re-use
  IB/ehca: Fix memleak on module unloading
  IB/mthca: Work around gcc bug on sparc64
  IPoIB: Connected mode experimental support
  IB/core: Use ARRAY_SIZE macro for mandatory_table
  IB/mthca: Use correct structure size in call to memset()

* master.kernel.org:/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  [CIFS] on reconnect to Samba - reset the unix capabilities
  [CIFS] Allow update of EOF on remote extend of file
  [CIFS] POSIX CIFS Extensions (continued) - POSIX Open
  [CIFS] Additional POSIX CIFS Extensions infolevels

After temporary server or network failure and reconneciton, we were not
resending the unix capabilities via SetFSInfo - which confused Samba posix
byte range locking code.

Discovered by jra
Signed-off-by: Steve French <sfrench@us.ibm.com>

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [IPSEC]: Fix the address family to refer encap_family
  [IPSEC]: changing API of xfrm6_tunnel_register
  [IPSEC]: make sit use the xfrm4_tunnel_register
  [IPSEC]: Changing API of xfrm4_tunnel_register.
  [TCP]: Prevent pseudo garbage in SYN's advertized window
  [NET_SCHED]: sch_hfsc: replace ASSERT macro by WARN_ON
  [BRIDGE] br_if: Fix oops in port_carrier_check
  [NETFILTER]: Clear GSO bits for TCP reset packet
  [TG3]: Update copyright, version, and reldate.
  [TG3]: Add some tx timeout debug messages.
  [TG3]: Use constant for PHY register 0x1e.
  [TG3]: Power down 5704 serdes transceiver when shutting down.
  [TG3]: 5906 doesn't need to switch to slower clock.
  [TG3]: 5722/5756 don't need PHY jitter workaround.
  [TG3]: Use lower DMA watermark for 5703.
  [TG3]: Save MSI state before suspend.
  [XFRM]: Fix IPv4 tunnel mode decapsulation with IPV6=n
  [IPV6] HASHTABLES: Use appropriate seed for caluculating ehash index.

* master.kernel.org:/pub/scm/linux/kernel/git/paulus/powerpc: (61 commits)
  [POWERPC] Use udbg_early_init() on ppc32
  [POWERPC] Open Firmware serial port driver
  [POWERPC] Move MPIC smp routines into mpic.c
  [POWERPC] Cleanup pseries kexec code
  [POWERPC] Cleanup pseries smp initialisation code
  [POWERPC] Consolidate pseries platform header files into pseries.h
  [POWERPC] 85xx: Drop use of SYNC macro in head_fsl_booke.S
  [POWERPC] cell: pm_rtas_activat_signals routine cleanup
  [POWERPC] cell: PPU Oprofile cleanup patch
  [POWERPC] spufs: avoid accessing kernel memory through mmapped /mem node
  [POWERPC] spu sched: static timeslicing for SCHED_RR contexts
  [POWERPC] spu sched: use DECLARE_BITMAP
  [POWERPC] spu sched: forced preemption at execution
  [POWERPC] spu sched: update some comments
  [POWERPC] spu sched: simplity spu_remove_from_active_list
  [POWERPC] spufs: optimize spu_run
  [POWERPC] spufs: runqueue simplification
  [POWERPC] spufs: move prio to spu_context
  [POWERPC] spufs: state_mutex cleanup
  [POWERPC] spufs: simplify state_mutex
  ...

udbg_early_init() is a function used on 64 bit systems, which
initializes whichever early udbg backend is configured.  This function
is not called on 32-bit, however if btext early debug is enabled it
does have an explicit, inline, #ifdef-ed assignment performing
analagous initialization.

This patch makes things more uniform by folding the btext
initialization as an option into udbg_early_init() and calling that
from the 32-bit setup path.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

This can be used for serial ports that are connected to an
OF platform bus but are not autodetected by the lecacy
serial support.
It will automatically take over devices that come from the
legacy serial detection, which usually is only one device.

In some cases, rtas may be set up to use the serial port
in the firmware, which allows easier debugging before probing
the serial ports. In this case, the "used-by-rtas" property
must be set by the firmware. This patch also adds code to the
legacy serial driver to check for this.
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Move a couple of MPIC smp routines into mpic.c, they're inside an SMP
block in mpic.c - so they're still only built for SMP.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Move all the pseries kexec code into one file, platforms/pseries/kexec.c
Provide helpers for setting up ppc_md.kexec_cpu_down, so that we don't
have to have #ifdef CONFIG_KEXEC in setup.c

Move the initialisation of the ppc_md kexec callbacks into an init routine.
This is well and truly early enough to cause no change in behaviour, we
can't kexec until userspace has given us a kernel to kexec into.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Move some extern declarations from setup.c into the new pseries.h.
While we're at it, provide dummy implementations for !SMP, to avoid
cluttering the C file with more #ifdefs.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Following the example of platforms/pasemi, consolidate a couple of
tiny header files in platforms/pseries into pseries.h.

This gives us a convenient place to put things that need to be
available to the platform code, but not public. And hopefully will
help people resist the temptation of sticking externs in C files.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6:
  i2c: Stop using i2c_adapter.class_dev
  i2c: Remove the warning on missing adapter device
  i2c: Declare more i2c_adapter parent devices
  i2c: PA Semi SMBus driver
  i2c-amd8111: Proposed cleanups
  i2c-parport: Add support for One For All remote JP1 interface
  i2c-viapro: Add support for the VIA CX700 south bridge
  i2c: Add IDs to adapters
  i2c: Update the list of bus IDs
  i2c: Add driver suspend/resume/shutdown support
  i2c: completion header cleanups
  i2c-i801: Document the SMBus unhiding quirk
  i2c-i801: Spelling fix
  i2c: Fix typo in SMBus Write Word Data description
  i2c-piix4: Add support for the ATI SB600
  i2c-nforce2: Drop unused reference to pci_dev
  i2c/vt8231: Remove superfluous initialization
  i2c-ali1563: Fix device initialization
  i2c-ali1563: Improve the status messages

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [MIPS] Fix sigset_t endianess swapping issues in 32-bit compat code.
  [MIPS] Fix uniprocessor Sibyte builds.
  [MIPS] Make entry.S a little more readable.
  [MIPS] Remove stray instruction from __get_user_asm_ll32.
  [MIPS] 32-bit: Fix warning about cast for fetching pointer from userspace.
  [MIPS] DECstation: Fix irq handling
  [MIPS] signals: make common _BLOCKABLE macro
  [MIPS] signal: Move sigframe definition for native O32/N64 into signal.c
  [MIPS] signal: Move {restore,setup}_sigcontext prototypes to their user
  [MIPS] signal: Fix warnings in o32 compat code.
  [MIPS] IP27: Enable N32 support in defconfig.
  Revert "[MIPS] Fix warning in get_user when fetching pointer object from userspace."
  [MIPS] Don't claim we support dma_declare_coherent_memory - we don't.
  [MIPS] Unify dma-{coherent,noncoherent.ip27,ip32}
  [MIPS] Improve branch prediction in ll/sc atomic operations.

* master.kernel.org:/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: (23 commits)
  [WATCHDOG] timers cleanup
  [WATCHDOG] ib700wdt.c - convert to platform_device part 2
  [WATCHDOG] ib700wdt.c - convert to platform_device
  [WATCHDOG] ib700wdt.c spinlock/WDIOC_SETOPTIONS changes
  [WATCHDOG] ib700wdt.c small clean-up's
  [WATCHDOG] ib700wdt.c clean-up init and exit routines
  [WATCHDOG] ib700_wdt.c stop + set_heartbeat operations
  [WATCHDOG] show default value for nowayout in module parameter
  [WATCHDOG] advantechwdt.c - convert to platform_device part 2
  [WATCHDOG] advantechwdt.c - convert to platform_device
  [WATCHDOG] advantechwdt.c - move set_heartbeat to a seperate function
  [WATCHDOG] advantechwdt.c - cleanup before platform_device patches
  [WATCHDOG] acquirewdt.c - convert to platform_device part 2
  [WATCHDOG] acquirewdt.c - convert to platform_device
  [WATCHDOG] acquirewdt.c - clean before platform_device patches
  [WATCHDOG] pcwd_usb.c - get heartbeat from dip switches
  [WATCHDOG] pcwd.c - e-mail adres update
  [WATCHDOG] pcwd_usb.c - get heartbeat from dip switches
  [WATCHDOG] pcwd_usb.c - document includes
  [WATCHDOG] pcwd_pci.c - spinlock fixes
  ...

Somewhere in the rewrite of the work queues my cleanup of SAK handling
got broken.  Maybe I didn't retest it properly or possibly the API
was changing so fast I missed something.  Regardless currently
triggering a SAK now generates an ugly BUG_ON and kills the kernel.

Thanks to Alexey Dobriyan <adobriyan@openvz.org> for spotting this.

This modifies the use of SAK_work to initialize it when the data
structure it resides in is initialized, and to simply call
schedule_work when we need to generate a SAK.  I update both
data structures that have a SAK_work member for consistency.

All of the old PREPARE_WORK calls that are now gone.

If we call schedule_work again before it has processed it
has generated the first SAK it will simply ignore the duplicate
schedule_work request.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Andrew Sharp <tigerand@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

When CONFIG_PREEMPT is not set, it also moves one branch instruction from
ret_from_irq() to ret_from_exception().  Therefore we favour the return
from irq case which should be more common than the other one.
Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com>
Acked-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

This did result in double clearing of the error return value on success
only but should make a meassurable overhead for sigreturn.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

When I post a patch (commit f431baa5),
I just tried to not change behavior of existing codes, but it seems
dec/int-handler.S had been broken since its previous commit
937a8015.

The caller of plat_irq_dispatch do setup/restore TI_REGS($28), so
dec's plat_irq_dispatch should not do it, and there is no need to
adjust RA.
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

This reverts commit 4ed3a77f.