This patch (as1649) reverts commit
55bcdce8 (USB: EHCI: remove ASS/PSS
polling timeout).  That commit was written under the assumption that
some controllers may take a very long time to turn off their async and
periodic schedules.  It now appears that in fact the schedules do get
turned off reasonably quickly, but some controllers occasionally leave
the schedules' status bits turned on and consequently ehci-hcd can't
tell that the schedules are off.

VIA controllers in particular have this problem.  ehci-hcd tells the
hardware to turn off the async schedule, the schedule does get turned
off, but the status bit remains on.  Since the EHCI spec requires that
the schedules not be re-enabled until the previous disable has taken
effect, with an unlimited timeout the async schedule never gets turned
back on.  The resulting symptom is that the system is unable to
communicate with USB devices.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-and-tested-by: Ronald <ronald645@gmail.com>
Reported-and-tested-by: Paul Hartman <paul.hartman@gmail.com>
Reported-and-tested-by: Dieter Nützel <dieter@nuetzel-hh.de>
Reported-and-tested-by: Jean Delvare <khali@linux-fr.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull USB patches from Greg Kroah-Hartman:
 "Here's the big USB merge for 3.9-rc1

  Nothing major, lots of gadget fixes, and of course, xhci stuff.

  All of this has been in linux-next for a while, with the exception of
  the last 3 patches, which were reverts of patches in the tree that
  caused problems, they went in yesterday."

* tag 'usb-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (190 commits)
  Revert "USB: EHCI: make ehci-vt8500 a separate driver"
  Revert "USB: EHCI: make ehci-orion a separate driver"
  Revert "USB: update host controller Kconfig entries"
  USB: update host controller Kconfig entries
  USB: EHCI: make ehci-orion a separate driver
  USB: EHCI: make ehci-vt8500 a separate driver
  USB: usb-storage: unusual_devs update for Super TOP SATA bridge
  USB: ehci-omap: Fix autoloading of module
  USB: ehci-omap: Don't free gpios that we didn't request
  USB: option: add Huawei "ACM" devices using protocol = vendor
  USB: serial: fix null-pointer dereferences on disconnect
  USB: option: add Yota / Megafon M100-1 4g modem
  drivers/usb: add missing GENERIC_HARDIRQS dependencies
  USB: storage: properly handle the endian issues of idProduct
  testusb: remove all mentions of 'usbfs'
  usb: gadget: imx_udc: make it depend on BROKEN
  usb: omap_control_usb: fix compile warning
  ARM: OMAP: USB: Add phy binding information
  ARM: OMAP2: MUSB: Specify omap4 has mailbox
  ARM: OMAP: devices: create device for usb part of control module
  ...

Pull staging tree update from Greg Kroah-Hartman:
 "Here's the big staging tree merge for 3.9-rc1

  Lots of cleanups and updates for drivers all through the staging tree.
  We are pretty much "code neutral" here, adding just about as many
  lines as we removed.

  All of these have been in linux-next for a while."

* tag 'staging-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (804 commits)
  staging: comedi: vmk80xx: wait for URBs to complete
  staging: comedi: drivers: addi-data: hwdrv_apci3200.c: Add a missing semicolon
  staging: et131x: Update TODO list
  staging: et131x: Remove assignment of skb->dev
  staging: wlan-ng: hfa384x.h: fix for error reported by smatch
  staging/zache checkpatch ERROR: spaces prohibited around that
  staging/ozwpan: Mark read only parameters and structs as const
  staging/ozwpan: Remove empty and unused function oz_cdev_heartbeat
  staging/ozwpan: Mark local functions as static (fix sparse warnings)
  staging/ozwpan: Add missing header includes
  staging/usbip: Mark local functions as static (fix sparse warnings)
  staging/xgifb: Remove duplicated code in loops.
  staging/xgifb: Consolidate return paths
  staging/xgifb: Remove code without effect
  staging/xgifb: Remove unnecessary casts
  staging/xgifb: Consolidate if/else if with identical code branches
  staging: vt6656: replaced custom TRUE definition with true
  staging: vt6656: replaced custom FALSE definition with false
  staging: vt6656: replace custom BOOL definition with bool
  staging/rtl8187se: Mark functions as static to silence sparse
  ...

Pull driver core patches from Greg Kroah-Hartman:
 "Here is the big driver core merge for 3.9-rc1

  There are two major series here, both of which touch lots of drivers
  all over the kernel, and will cause you some merge conflicts:

   - add a new function called devm_ioremap_resource() to properly be
     able to check return values.

   - remove CONFIG_EXPERIMENTAL

  Other than those patches, there's not much here, some minor fixes and
  updates"

Fix up trivial conflicts

* tag 'driver-core-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (221 commits)
  base: memory: fix soft/hard_offline_page permissions
  drivercore: Fix ordering between deferred_probe and exiting initcalls
  backlight: fix class_find_device() arguments
  TTY: mark tty_get_device call with the proper const values
  driver-core: constify data for class_find_device()
  firmware: Ignore abort check when no user-helper is used
  firmware: Reduce ifdef CONFIG_FW_LOADER_USER_HELPER
  firmware: Make user-mode helper optional
  firmware: Refactoring for splitting user-mode helper code
  Driver core: treat unregistered bus_types as having no devices
  watchdog: Convert to devm_ioremap_resource()
  thermal: Convert to devm_ioremap_resource()
  spi: Convert to devm_ioremap_resource()
  power: Convert to devm_ioremap_resource()
  mtd: Convert to devm_ioremap_resource()
  mmc: Convert to devm_ioremap_resource()
  mfd: Convert to devm_ioremap_resource()
  media: Convert to devm_ioremap_resource()
  iommu: Convert to devm_ioremap_resource()
  drm: Convert to devm_ioremap_resource()
  ...

Pull sound updates from Takashi Iwai:
 "The biggest change in this update is the unification of HD-audio codec
  parsers.  Now the HD-audio codec is parsed in a generic parser code
  which is invoked by each HD-audio codec driver.

  Some background information is found in David Henningsson's blog
  entry:

      http://voices.canonical.com/david.henningsson/2013/01/18/upcoming-changes-to-the-intel-hda-drivers/

  Other than that, some random updates/fixes like USB-audio and a bunch
  of small AoC updates as usual.

  Highlights:

   - Unification of HD-audio parser code (aka generic parser)

   - Support of new Intel HD-audio controller, new IDT codecs

   - Fixes for HD-audio HDMI audio hotplug

   - Haswell HDMI audio fixup

   - Support of Creative CA0132 DSP code

   - A few fixes of HDSP driver

   - USB-audio fix for Roland A-PRO, M-Audio FT C600

   - Support PM for aloop driver (and fixes Oops)

   - Compress API updates for gapless playback support

  For ASoC part:

   - Support for a wider range of hardware in the compressed stream code

   - The ability to mute capture streams as well as playback streams
     while inactive

   - DT support for AK4642, FSI, Samsung I2S and WM8962

   - AC'97 support for Tegra

   - New driver for max98090, replacing the stub which was there

   - A new driver from Dialog

  Note that due to dependencies, DTification of DMA support for Samsung
  platforms (used only by the and I2S driver and SPI) is merged here as
  well."

Fix up trivial conflict in drivers/spi/spi-s3c64xx.c due to removed code
being changed.

* tag 'sound-3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (453 commits)
  ALSA: usb: Fix Processing Unit Descriptor parsers
  ALSA: hda - hdmi: Notify userspace when ELD control changes
  ALSA: hda - hdmi: Protect ELD buffer
  ALSA: hda - hdmi: Refactor hdmi_eld into parsed_hdmi_eld
  ALSA: hda - hdmi: Do not expose eld data when eld is invalid
  ALSA: hda - hdmi: ELD shouldn't be valid after unplug
  ALSA: hda - Fix the silent speaker output on Fujitsu S7020 laptop
  ALSA: hda - add quirks for mute LED on two HP machines
  ALSA: usb/quirks, fix out-of-bounds access
  ASoC: codecs: Add da7213 codec
  ALSA: au88x0 - Define channel map for au88x0
  ALSA: compress: add support for gapless playback
  ALSA: hda - Remove speaker clicks on CX20549
  ALSA: hda - Disable runtime PM for Intel 5 Series/3400
  ALSA: hda - Increase badness for missing multi-io
  ASoC: arizona: Automatically manage input mutes
  ALSA: hda - Fix broken workaround for HDMI/SPDIF conflicts
  ALSA: hda/ca0132 - Add missing \n to debug prints
  ALSA: hda/ca0132 - Fix type of INVALID_CHIP_ADDRESS
  ALSA: hda - update documentation for no-primary-hp fixup
  ...

Pull pstore patches from Tony Luck:
 "A few fixes to reduce places where pstore might hang a system in the
  crash path.  Plus a new mountpoint (/sys/fs/pstore ...  makes more
  sense then /dev/pstore)."

Fix up trivial conflict in drivers/firmware/efivars.c

* tag 'please-pull-pstore' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
  pstore: Create a convenient mount point for pstore
  efi_pstore: Introducing workqueue updating sysfs
  efivars: Disable external interrupt while holding efivars->lock
  efi_pstore: Avoid deadlock in non-blocking paths
  pstore: Avoid deadlock in panic and emergency-restart path

Pull dlm update from David Teigland:
 "This includes a single patch to avoid excessive and unnecessary
  scanning of rsbs to free."

* tag 'dlm-3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
  dlm: avoid scanning unchanged toss lists

Pull NFS client bugfixes from Trond Myklebust:

 - Fix an Oops in the pNFS layoutget code

 - Fix a number of NFSv4 and v4.1 state recovery deadlocks and hangs due
   to the interaction of the session drain lock and state management
   locks.

 - Remove task->tk_xprt, which was hiding a lot of RCU dereferencing
   bugs

 - Fix a long standing NFSv3 posix lock recovery bug.

 - Revert commit 324d003b ("NFS: add nfs_sb_deactive_async to avoid
   deadlock").  It turned out that the root cause of the deadlock was
   due to interactions with the workqueues that have now been resolved.

* tag 'nfs-for-3.9-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (22 commits)
  NLM: Ensure that we resend all pending blocking locks after a reclaim
  umount oops when remove blocklayoutdriver first
  sunrpc: silence build warning in gss_fill_context
  nfs: remove kfree() redundant null checks
  NFSv4.1: Don't decode skipped layoutgets
  NFSv4.1: Fix bulk recall and destroy of layouts
  NFSv4.1: Fix an ABBA locking issue with session and state serialisation
  NFSv4: Fix a reboot recovery race when opening a file
  NFSv4: Ensure delegation recall and byte range lock removal don't conflict
  NFSv4: Fix up the return values of nfs4_open_delegation_recall
  NFSv4.1: Don't lose locks when a server reboots during delegation return
  NFSv4.1: Prevent deadlocks between state recovery and file locking
  NFSv4: Allow the state manager to mark an open_owner as being recovered
  SUNRPC: Add missing static declaration to _gss_mech_get_by_name
  Revert "NFS: add nfs_sb_deactive_async to avoid deadlock"
  SUNRPC: Nuke the tk_xprt macro
  SUNRPC: Avoid RCU dereferences in the transport bind and connect code
  SUNRPC: Fix an RCU dereference in xprt_reserve
  SUNRPC: Pass pointers to struct rpc_xprt to the congestion window
  SUNRPC: Fix an RCU dereference in xs_local_rpcbind
  ...

Pull GFS2 updates from Steven Whitehouse:
 "This is one of the smallest collections of patches for the merge
  window for some time.  There are some clean ups relating to the
  transaction code and the shrinker, which are mostly in preparation for
  further development, but also make the code much easier to follow in
  these areas.

  There is a patch which allows the use of ->writepages even in the
  default ordered write mode for all writebacks.  This results in
  sending larger i/os to the block layer, and a subsequent increase in
  performance.  It also reduces the number of different i/o paths by
  one.

  There is also a bug fix reinstating the withdraw ack system which
  somehow got lost when the lock modules were merged into GFS2."

* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw:
  GFS2: Reinstate withdraw ack system
  GFS2: Get a block reservation before resizing a file
  GFS2: Split glock lru processing into two parts
  GFS2: Use ->writepages for ordered writes
  GFS2: Clean up freeze code
  GFS2: Merge gfs2_attach_bufdata() into trans.c
  GFS2: Copy gfs2_trans_add_bh into new data/meta functions
  GFS2: Split gfs2_trans_add_bh() into two
  GFS2: Merge revoke adding functions
  GFS2: Separate LRU scanning from shrinker

Pull xfs update from Ben Myers:
 "Primarily bugfixes and a few cleanups:

   - fix(es) for compound buffers

   - remove unused XFS_TRANS_DEBUG routines

   - fix for dquot soft timer asserts due to overflow of d_blk_softlimit

   - don't zero allocation args structure members after they are memset(0)

   - fix for regression in dir v2 code introduced in commit 20f7e9f3

   - remove obsolete simple_strto<foo>

   - fix return value when filesystem probe finds no XFS magic, a
     regression introduced in 98021821.

   - remove boolean_t typedef completely

   - fix stack switch in __xfs_bmapi_allocate by moving the check for
     stack switch up into xfs_bmapi_write.

   - fix build error due to incomplete boolean_t removal

   - fix oops in _xfs_buf_find by validating that the requested block is
     within the filesystem bounds.

   - limit speculative preallocation near ENOSPC.

   - fix an unmount hang in xfs_wait_buftarg by freeing the
     xfs_buf_log_item in xfs_buf_item_unlock.

   - fix a possible use after free with AIO.

   - fix xfs_swap_extents after removal of xfs_flushinval_pages, a
     regression introduced in fb595814.

   - replace hardcoded 128 with log header size

   - add memory barrier before wake_up_bit in xfs_ifunlock

   - limit speculative preallocation on sparse files

   - fix xa_lock recursion bug introduced in 90810b9e

   - fix write verifier for symlinks"

Fixed up conflicts in fs/xfs/xfs_buf_item.c (due to bli_format rename in
commit 0f22f9d0 affecting the removed XFS_TRANS_DEBUG routines in
commit ec47eb6b).

* tag 'for-linus-v3.9-rc1' of git://oss.sgi.com/xfs/xfs: (36 commits)
  xfs: xfs_bmap_add_attrfork_local is too generic
  xfs: remove log force from xfs_buf_trylock()
  xfs: recheck buffer pinned status after push trylock failure
  xfs: limit speculative prealloc size on sparse files
  xfs: memory barrier before wake_up_bit()
  xfs: refactor space log reservation for XFS_TRANS_ATTR_SET
  xfs: make use of XFS_SB_LOG_RES() at xfs_fs_log_dummy()
  xfs: make use of XFS_SB_LOG_RES() at xfs_mount_log_sb()
  xfs: make use of XFS_SB_LOG_RES() at xfs_log_sbcount()
  xfs: introduce XFS_SB_LOG_RES() for transactions that modify sb on disk
  xfs: calculate XFS_TRANS_QM_QUOTAOFF_END space log reservation at mount time
  xfs: calculate XFS_TRANS_QM_QUOTAOFF space log reservation at mount time
  xfs: calculate XFS_TRANS_QM_DQALLOC space log reservation at mount time
  xfs: calcuate XFS_TRANS_QM_SETQLIM space log reservation at mount time
  xfs: calculate xfs_qm_write_sb_changes() space log reservation at mount time
  xfs: calculate XFS_TRANS_QM_SBCHANGE space log reservation at mount time
  xfs: make use of xfs_calc_buf_res() in xfs_trans.c
  xfs: add a helper to figure out the space log reservation per item
  xfs: Fix xfs_swap_extents() after removal of xfs_flushinval_pages()
  xfs: Fix possible use-after-free with AIO
  ...

Pull fuse updates from Miklos Szeredi:
 "The biggest part of this pull request is a patch series from Maxim
  Patlasov to optimize scatter-gather direct IO.  There's also the
  addition of a "readdirplus" API, poll events and various fixes and
  cleanups.

  There's a one line change outside of fuse to mm/filemap.c which makes
  the argument of iov_iter_single_seg_count() const, required by Maxim's
  patches."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: (22 commits)
  fuse: allow control of adaptive readdirplus use
  Synchronize fuse header with one used in library
  fuse: send poll events
  fuse: don't WARN when nlink is zero
  fuse: avoid out-of-scope stack access
  fuse: bump version for READDIRPLUS
  FUSE: Adapt readdirplus to application usage patterns
  Do not use RCU for current process credentials
  fuse: cleanup fuse_direct_io()
  fuse: optimize __fuse_direct_io()
  fuse: optimize fuse_get_user_pages()
  fuse: pass iov[] to fuse_get_user_pages()
  mm: minor cleanup of iov_iter_single_seg_count()
  fuse: use req->page_descs[] for argpages cases
  fuse: add per-page descriptor <offset, length> to fuse_req
  fuse: rework fuse_do_ioctl()
  fuse: rework fuse_perform_write()
  fuse: rework fuse_readpages()
  fuse: rework fuse_retrieve()
  fuse: categorize fuse_get_req()
  ...

Pull v9fs updates from Eric Van Hensbergen:
 "Just fixes and simplifications"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
  fs/9p: Fix atomic_open
  fs/9p: Don't use O_TRUNC flag in TOPEN and TLOPEN request
  locking in fs/9p ->readdir()

Pull security subsystem updates from James Morris:
 "This is basically a maintenance update for the TPM driver and EVM/IMA"

Fix up conflicts in lib/digsig.c and security/integrity/ima/ima_main.c

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (45 commits)
  tpm/ibmvtpm: build only when IBM pseries is configured
  ima: digital signature verification using asymmetric keys
  ima: rename hash calculation functions
  ima: use new crypto_shash API instead of old crypto_hash
  ima: add policy support for file system uuid
  evm: add file system uuid to EVM hmac
  tpm_tis: check pnp_acpi_device return code
  char/tpm/tpm_i2c_stm_st33: drop temporary variable for return value
  char/tpm/tpm_i2c_stm_st33: remove dead assignment in tpm_st33_i2c_probe
  char/tpm/tpm_i2c_stm_st33: Remove __devexit attribute
  char/tpm/tpm_i2c_stm_st33: Don't use memcpy for one byte assignment
  tpm_i2c_stm_st33: removed unused variables/code
  TPM: Wait for TPM_ACCESS tpmRegValidSts to go high at startup
  tpm: Fix cancellation of TPM commands (interrupt mode)
  tpm: Fix cancellation of TPM commands (polling mode)
  tpm: Store TPM vendor ID
  TPM: Work around buggy TPMs that block during continue self test
  tpm_i2c_stm_st33: fix oops when i2c client is unavailable
  char/tpm: Use struct dev_pm_ops for power management
  TPM: STMicroelectronics ST33 I2C BUILD STUFF
  ...

A patch to fix some unreachable code in search_my_process_keyrings() got
applied twice by two different routes upstream as commits e67eab39
and b010520a (both "fix unreachable code").

Unfortunately, the second application removed something it shouldn't
have and this wasn't detected by GIT.  This is due to the patch not
having sufficient lines of context to distinguish the two places of
application.

The effect of this is relatively minor: inside the kernel, the keyring
search routines may search multiple keyrings and then prioritise the
errors if no keys or negative keys are found in any of them.  With the
extra deletion, the presence of a negative key in the thread keyring
(causing ENOKEY) is incorrectly overridden by an error searching the
process keyring.

So revert the second application of the patch.
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 99fc8645 "ALSA: usb-mixer:
parse descriptors with structs" introduced a set of useful parsers
for descriptors. Unfortunately the parses for the Processing Unit
Descriptor came with a very subtle bug...

Functions uac_processing_unit_iProcessing() and
uac_processing_unit_specific() were indexing the baSourceID array
forgetting the fields before the iProcessing and process-specific
descriptors.

The problem was observed with Sound Blaster Extigy mixer,
where nNrModes in Up/Down-mix Processing Unit Descriptor
was accessed at offset 10 of the descriptor (value 0)
instead of offset 15 (value 7). In result the resulting
control had interesting limit values:

Simple mixer control 'Channel Routing Mode Select',0
  Capabilities: volume volume-joined penum
  Playback channels: Mono
  Capture channels: Mono
  Limits: 0 - -1
  Mono: -1 [100%]

Fixed by starting from the bmControls, which was calculated
correctly, instead of baSourceID.

Now the mentioned control is fine:

Simple mixer control 'Channel Routing Mode Select',0
  Capabilities: volume volume-joined penum
  Playback channels: Mono
  Capture channels: Mono
  Limits: 0 - 6
  Mono: 0 [0%]
Signed-off-by: Pawel Moll <mail@pawelmoll.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Pull networking update from David Miller:

 1) Checkpoint/restarted TCP sockets now can properly propagate the TCP
    timestamp offset.  From Andrey Vagin.

 2) VMWARE VM VSOCK layer, from Andy King.

 3) Much improved support for virtual functions and SR-IOV in bnx2x,
    from Ariel ELior.

 4) All protocols on ipv4 and ipv6 are now network namespace aware, and
    all the compatability checks for initial-namespace-only protocols is
    removed.  Thanks to Tom Parkin for helping deal with the last major
    holdout, L2TP.

 5) IPV6 support in netpoll and network namespace support in pktgen,
    from Cong Wang.

 6) Multiple Registration Protocol (MRP) and Multiple VLAN Registration
    Protocol (MVRP) support, from David Ward.

 7) Compute packet lengths more accurately in the packet scheduler, from
    Eric Dumazet.

 8) Use per-task page fragment allocator in skb_append_datato_frags(),
    also from Eric Dumazet.

 9) Add support for connection tracking labels in netfilter, from
    Florian Westphal.

10) Fix default multicast group joining on ipv6, and add anti-spoofing
    checks to 6to4 and 6rd.  From Hannes Frederic Sowa.

11) Make ipv4/ipv6 fragmentation memory limits more reasonable in modern
    times, rearrange inet frag datastructures for better cacheline
    locality, and move more operations outside of locking.  From Jesper
    Dangaard Brouer.

12) Instead of strict master <--> slave relationships, allow arbitrary
    scenerios with "upper device lists".  From Jiri Pirko.

13) Improve rate limiting accuracy in TBF and act_police, also from Jiri
    Pirko.

14) Add a BPF filter netfilter match target, from Willem de Bruijn.

15) Orphan and delete a bunch of pre-historic networking drivers from
    Paul Gortmaker.

16) Add TSO support for GRE tunnels, from Pravin B SHelar.  Although
    this still needs some minor bug fixing before it's %100 correct in
    all cases.

17) Handle unresolved IPSEC states like ARP, with a resolution packet
    queue.  From Steffen Klassert.

18) Remove TCP Appropriate Byte Count support (ABC), from Stephen
    Hemminger.  This was long overdue.

19) Support SO_REUSEPORT, from Tom Herbert.

20) Allow locking a socket BPF filter, so that it cannot change after a
    process drops capabilities.

21) Add VLAN filtering to bridge, from Vlad Yasevich.

22) Bring ipv6 on-par with ipv4 and do not cache neighbour entries in
    the ipv6 routes, from YOSHIFUJI Hideaki.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1538 commits)
  ipv6: fix race condition regarding dst->expires and dst->from.
  net: fix a wrong assignment in skb_split()
  ip_gre: remove an extra dst_release()
  ppp: set qdisc_tx_busylock to avoid LOCKDEP splat
  atl1c: restore buffer state
  net: fix a build failure when !CONFIG_PROC_FS
  net: ipv4: fix waring -Wunused-variable
  net: proc: fix build failed when procfs is not configured
  Revert "xen: netback: remove redundant xenvif_put"
  net: move procfs code to net/core/net-procfs.c
  qmi_wwan, cdc-ether: add ADU960S
  bonding: set sysfs device_type to 'bond'
  bonding: fix bond_release_all inconsistencies
  b44: use netdev_alloc_skb_ip_align()
  xen: netback: remove redundant xenvif_put
  net: fec: Do a sanity check on the gpio number
  ip_gre: propogate target device GSO capability to the tunnel device
  ip_gre: allow CSUM capable devices to handle packets
  bonding: Fix initialize after use for 3ad machine state spinlock
  bonding: Fix race condition between bond_enslave() and bond_3ad_update_lacp_rate()
  ...

Pull sparc updates from David Miller:
 "Mostly more sparc64 THP bug fixes, and a refactoring of SMP bootup on
  sparc32 from Sam Ravnborg."

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc32: refactor smp boot
  sparc64: Fix huge PMD to PTE translation for sun4u in TLB miss handler.
  sparc64: Fix tsb_grow() in atomic context.
  sparc64: Handle hugepage TSB being NULL.
  sparc64: Fix gfp_flags setting in tsb_grow().

Pull arm64 patches from Catalin Marinas:

 - SMP support for the PSCI booting protocol (power state coordination
   interface).

 - Simple earlyprintk support.

 - Platform devices populated by default from the DT (SoC-agnostic).

 - CONTEXTIDR support (used by external trace tools).

* tag 'arm64-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64:
  arm64: mm: update CONTEXTIDR register to contain PID of current process
  arm64: atomics: fix grossly inconsistent asm constraints for exclusives
  arm64: compat: use compat_uptr_t type for compat_ucontext.uc_link
  arm64: Select ARCH_WANT_FRAME_POINTERS
  arm64: Add kvm_para.h and xor.h generic headers
  arm64: SMP: enable PSCI boot method
  arm64: psci: add support for PSCI invocations from the kernel
  arm64: SMP: rework the SMP code to be enabling method agnostic
  arm64: perf: add guest vs host discrimination
  arm64: add COMPAT_PSR_*_BIT flags
  arm64: Add simple earlyprintk support
  arm64: Populate the platform devices

Pull ARM updates (part two) from Russell King:

 - breakpoint and perf updates from Will Deacon.

 - hypervisor boot mode updates from Will.

 - support for Power State Coordination Interface via the Hypervisor

 - core ARM support for KVM

* 'for-linus-2' of git://git.linaro.org/people/rmk/linux-arm: (32 commits)
  KVM: ARM: Add maintainer entry for KVM/ARM
  KVM: ARM: Power State Coordination Interface implementation
  KVM: ARM: Handle I/O aborts
  KVM: ARM: Handle guest faults in KVM
  KVM: ARM: VFP userspace interface
  KVM: ARM: Demux CCSIDR in the userspace API
  KVM: ARM: User space API for getting/setting co-proc registers
  KVM: ARM: Emulation framework and CP15 emulation
  KVM: ARM: World-switch implementation
  KVM: ARM: Inject IRQs and FIQs from userspace
  KVM: ARM: Memory virtualization setup
  KVM: ARM: Hypervisor initialization
  KVM: ARM: Initial skeleton to compile KVM support
  ARM: Section based HYP idmap
  ARM: Add page table and page defines needed by KVM
  ARM: perf: simplify __hw_perf_event_init err handling
  ARM: perf: remove unnecessary checks for idx < 0
  ARM: perf: handle armpmu_register failing
  ARM: perf: don't pretend to support counting of L1I writes
  ARM: perf: remove redundant NULL check on cpu_pmu
  ...

Pull ARM updates (part one) from Russell King:

 - MMC patches from Ulf Hansson and Pawel Moll.  These add support for
   DDR mode and the latest variant found on ARM Versatile Express, as
   well as a number of cleanups.

 - A fix for to improve the behaviour of ARMs sched_clock()

 - Changes to the ARM ioremap() code.  I'm not convinced with the
   primary arguments for this, but it's been around for a while, and
   people seem happy with it - and the "other" justification for this is
   at

      http://lkml.org/lkml/2012/12/6/184

 - Add SCHED_HRTICK to ARMs Kconfig

 - Making the ARM SHA/AES code Thumb-2 compatible

 - A collection of other small updates.

* 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (26 commits)
  ARM: add SCHED_HRTICK config option
  ARM: 7650/1: mm: replace direct access to mm->context.id with new macro
  ARM: 7649/1: mm: mm->context.id fix for big-endian
  ARM: 7648/1: pci: Allow passing per-controller private data
  ARM: 7647/1: pci: Keep pci_common_init() around after init
  ARM: fix warnings introduced by previous patch
  ARM: 7646/1: mm: use static_vm for managing static mapped areas
  ARM: 7645/1: ioremap: introduce an infrastructure for static mapped area
  ARM: 7644/1: vmregion: remove vmregion code entirely
  MAINTAINERS: Re-assert MMCI driver maintainer status
  MAINTAINERS: add additional file for MMCI driver
  MAINTAINERS: add maintainer entry for AMBA serial drivers
  ARM: 7637/1: memory: use SZ_ constants for defining the virtual memory layout
  ARM: 7643/1: sched: correct update_sched_clock()
  ARM: 7635/1: versatile: fix the PCI IRQ regression
  ARM: 7639/1: cache-l2x0: add missed dummy outer_resume entry
  ARM: 7630/1: mmc: mmci: Fixup and cleanup code for DMA handling
  ARM: 7632/1: spinlock: avoid exclusive accesses on unlock() path
  ARM: 7631/1: mmc: mmci: Add new VE MMCI variant
  ARM: 7623/1: mmc: mmci: Fixup clock gating when freq is 0 for ST-variants
  ...

Pull m68k update from Geert Uytterhoeven.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: Sort out !CONFIG_MMU_SUN3 vs. CONFIG_HAS_DMA
  swim: Add missing spinlock init

Introduce a common smp_callin() function to call
from trampoline_32.S.
Add platform specific functions to handle the
platform details.

This is in preparation for a patch that will
unify the smp boot stuff for all architectures.
sparc32 was significantly different to warrant
this patch in preparation.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: David S. Miller <davem@davemloft.net>
Cc: "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com>
Acked-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When we set the sun4u version of the PTE execute bit, it's:

	or	REG, _PAGE_EXEC_4U, REG

_PAGE_EXEC_4U is 0x1000, unfortunately the immedate field of the
'or' instruction is a signed 13-bit value.  So the above actually
assembles into:

	or	REG, -4096, REG

completely corrupting the final PTE value.

Set it with a:

	sethi	%hi(_PAGE_EXEC_4U), TMP
	or	REG, TMP, REG

sequence instead.

This fixes "git gc" crashes on sun4u machines.
Reported-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: David S. Miller <davem@davemloft.net>

Eric Dumazet wrote:
| Some strange crashes happen in rt6_check_expired(), with access
| to random addresses.
|
| At first glance, it looks like the RTF_EXPIRES and
| stuff added in commit 1716a961
| (ipv6: fix problem with expired dst cache)
| are racy : same dst could be manipulated at the same time
| on different cpus.
|
| At some point, our stack believes rt->dst.from contains a dst pointer,
| while its really a jiffie value (as rt->dst.expires shares the same area
| of memory)
|
| rt6_update_expires() should be fixed, or am I missing something ?
|
| CC Neil because of https://bugzilla.redhat.com/show_bug.cgi?id=892060

Because we do not have any locks for dst_entry, we cannot change
essential structure in the entry; e.g., we cannot change reference
to other entity.

To fix this issue, split 'from' and 'expires' field in dst_entry
out of union.  Once it is 'from' is assigned in the constructor,
keep the reference until the very last stage of the life time of
the object.

Of course, it is unsafe to change 'from', so make rt6_set_from simple
just for fresh entries.
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Reported-by: Neil Horman <nhorman@tuxdriver.com>
CC: Gao Feng <gaofeng@cn.fujitsu.com>
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reported-by: Steinar H. Gunderson <sesse@google.com>
Reviewed-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

commit c9af6db4 (net: Fix possible wrong checksum generation)
has a suspicous piece:

	-       skb_shinfo(skb1)->gso_type = skb_shinfo(skb)->gso_type;
	-
	+       skb_shinfo(skb)->tx_flags = skb_shinfo(skb1)->tx_flags & SKBTX_SHARED_FRAG;

skb1 is the new skb, therefore should be on the left side of the assignment.
This patch fixes it.

Cc: Pravin B Shelar <pshelar@nicira.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Cong Wang <amwang@redhat.com>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull EDAC updates from Borislav Petkov:
 "Mostly AMD's side of EDAC.  It is basically a new family enablement
  stuff: AMD F16h MCE decoding enablement from Jacob Shin.  The rest is
  trivial cleanups."

* tag 'edac_3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  mpc85xx_edac: Fix typo
  EDAC, MCE, AMD: Remove unneeded exports
  EDAC, MCE, AMD: Add MCE decoding support for Family 16h
  EDAC, MCE, AMD: Make MC2 decoding per-family
  amd64_edac: Remove dead code

Pull ACPI and power management updates from Rafael Wysocki:

 - Rework of the ACPI namespace scanning code from Rafael J.  Wysocki
   with contributions from Bjorn Helgaas, Jiang Liu, Mika Westerberg,
   Toshi Kani, and Yinghai Lu.

 - ACPI power resources handling and ACPI device PM update from Rafael
   J Wysocki.

 - ACPICA update to version 20130117 from Bob Moore and Lv Zheng with
   contributions from Aaron Lu, Chao Guan, Jesper Juhl, and Tim Gardner.

 - Support for Intel Lynxpoint LPSS from Mika Westerberg.

 - cpuidle update from Len Brown including Intel Haswell support, C1
   state for intel_idle, removal of global pm_idle.

 - cpuidle fixes and cleanups from Daniel Lezcano.

 - cpufreq fixes and cleanups from Viresh Kumar and Fabio Baltieri with
   contributions from Stratos Karafotis and Rickard Andersson.

 - Intel P-states driver for Sandy Bridge processors from Dirk
   Brandewie.

 - cpufreq driver for Marvell Kirkwood SoCs from Andrew Lunn.

 - cpufreq fixes related to ordering issues between acpi-cpufreq and
   powernow-k8 from Borislav Petkov and Matthew Garrett.

 - cpufreq support for Calxeda Highbank processors from Mark Langsdorf
   and Rob Herring.

 - cpufreq driver for the Freescale i.MX6Q SoC and cpufreq-cpu0 update
   from Shawn Guo.

 - cpufreq Exynos fixes and cleanups from Jonghwan Choi, Sachin Kamat,
   and Inderpal Singh.

 - Support for "lightweight suspend" from Zhang Rui.

 - Removal of the deprecated power trace API from Paul Gortmaker.

 - Assorted updates from Andreas Fleig, Colin Ian King, Davidlohr Bueso,
   Joseph Salisbury, Kees Cook, Li Fei, Nishanth Menon, ShuoX Liu,
   Srinivas Pandruvada, Tejun Heo, Thomas Renninger, and Yasuaki
   Ishimatsu.

* tag 'pm+acpi-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (267 commits)
  PM idle: remove global declaration of pm_idle
  unicore32 idle: delete stray pm_idle comment
  openrisc idle: delete pm_idle
  mn10300 idle: delete pm_idle
  microblaze idle: delete pm_idle
  m32r idle: delete pm_idle, and other dead idle code
  ia64 idle: delete pm_idle
  cris idle: delete idle and pm_idle
  ARM64 idle: delete pm_idle
  ARM idle: delete pm_idle
  blackfin idle: delete pm_idle
  sparc idle: rename pm_idle to sparc_idle
  sh idle: rename global pm_idle to static sh_idle
  x86 idle: rename global pm_idle to static x86_idle
  APM idle: register apm_cpu_idle via cpuidle
  cpufreq / intel_pstate: Add kernel command line option disable intel_pstate.
  cpufreq / intel_pstate: Change to disallow module build
  tools/power turbostat: display SMI count by default
  intel_idle: export both C1 and C1E
  ACPI / hotplug: Fix concurrency issues and memory leaks
  ...

Pull device tree changes from Grant Likely:
 "All around device tree changes destined for v3.8.  Aside from the
  documentation updates the highlights in this branch include:

   - Kbuild changes for using CPP with .dts files
   - locking fix from preempt_rt patchset
   - include DT alias names in device uevent
   - Selftest bugfixes and improvements
   - New function for counting phandles stanzas in a property
   - constify argument to of_node_full_name()
   - Various bug fixes

  This tree did also contain a commit to use platform_device_add instead
  of open-coding the device add code, but it caused problems with amba
  devices and needed to be reverted."

* tag 'dt-for-linus' of git://git.secretlab.ca/git/linux: (23 commits)
  Revert "of: use platform_device_add"
  kbuild: limit dtc+cpp include path
  gpio: Make of_count_named_gpios() use new of_count_phandle_with_args()
  of: Create function for counting number of phandles in a property
  of/base: Clean up exit paths for of_parse_phandle_with_args()
  of/selftest: Use selftest() macro throughout
  of/selftest: Fix GPIOs selftest to cover the 7th case
  of: fix recursive locking in of_get_next_available_child()
  documentation/devicetree: Fix a typo in exynos-dw-mshc.txt
  OF: convert devtree lock from rw_lock to raw spinlock
  of/exynos_g2d: Add Bindings for exynos G2D driver
  kbuild: create a rule to run the pre-processor on *.dts files
  input: Extend matrix-keypad device tree binding
  devicetree: Move NS2 LEDs binding into LEDs directory
  of: use platform_device_add
  powerpc/5200: Fix size to request_mem_region() call
  documentation/devicetree: Fix typos
  of: add 'const' to of_node_full_name parameter
  of: Output devicetree alias names in uevent
  DT: add vendor prefixes for Renesas and Toshiba
  ...

Pull SPI changes from Grant Likely:
 "Changes to both core spi code and spi device drivers.  The driver
  changes are the usual set of bug fixes and platform enablement.

  Core code changes include:

   - More intelligent assignment of SPI bus numbers when using DT

   - Common mechanism for using gpios as CS lines

   - Pull checks for bits_per_word and transfer speed out of drivers and
     into core code

   - Ensure temporary DMA buffers are DMA safe"

* tag 'spi-for-linus' of git://git.secretlab.ca/git/linux: (50 commits)
  spi: Document cs_gpios and cs_gpio in kernel-doc
  spi/of: Fix initialization of cs_gpios array
  spi/pxa2xx: add support for Lynxpoint SPI controllers
  spi/pxa2xx: add support for Intel Low Power Subsystem SPI
  spi/pxa2xx: add support for SPI_LOOP
  spi/pxa2xx: add support for runtime PM
  spi/pxa2xx: add support for DMA engine
  spi/pxa2xx: break out the private DMA API usage into a separate file
  spi/ath79: add shutdown handler
  spi/mips-lantiq: set SPI_MASTER_HALF_DUPLEX flag
  spi/mips-lantiq: make use of spi_finalize_current_message
  spi/bcm63xx: work around inability to keep CS up
  spi/davinci: use request_threaded_irq() to fix deadlock
  spi/orion: Use module_platform_driver()
  spi/bcm63xx: reject transfers unable to transfer
  spi: Ensure memory used for spi_write_then_read() is DMA safe
  spi/spi-mpc512x-psc: init mode bits supported by the driver
  spi/mpc512x-psc: don't use obsolet cell-index property
  spi: Remove erroneous __init, __exit and __exit_p() references in drivers
  spi/s3c64xx: fix checkpatch warnings and error
  ...

Pull clock framework update from Michael Turquette:
 "The common clock framework changes for 3.9 are almost entirely fixes.

  None are dire enough to be Cc'd to stable which may be interpreted to
  mean that users of the framework are reaching stability.  Lots of new
  adoption of this framework is via DeviceTree data and that comes
  through the respective architecture and platform trees instead of
  through the clk framework tree.

  Two new features are improved debugfs output and an improvement to how
  DT clocks are initialized by reusing a common method."

* tag 'clk-for-linus' of git://git.linaro.org/people/mturquette/linux: (25 commits)
  clk: sunxi: remove stale Makefile entry
  clk: vexpress: Use common of_clk_init() function
  clk: zynq: Use common of_clk_init() function
  clk: vt8500: Use common of_clk_init() function
  clk: highbank: Use common of_clk_init() function
  clk: sunxi: Use common of_clk_init() function
  clk: add common of_clk_init() function
  clk: Deduplicate exit code in clk_set_rate
  clk: beautify Makefile
  clk-divider: fix macros
  clk: prima2: enable dt-binding clkdev mapping
  clk: mxs: Index is always positive
  clk: max77686: Avoid double free at remove time
  clk: remove exported function from __init section
  clk: vt8500: Add support for WM8750/WM8850 PLL clocks
  clk: vt8500: Fix division-by-0 when requested rate=0
  clk: vt8500: Fix device clock divisor calculations
  clk: vt8500: Fix error in PLL calculations on non-exact match.
  clk: max77686: Remove unnecessary NULL checking for container_of()
  clk: JSON debugfs clock tree summary
  ...

Pull input updates from Dmitry Torokhov:
 "Two new touchpad drivers - Cypress APA I2C Trackpad and Cypress PS/2
  touchpad and a big update to ALPS driver from Kevin Cernekee that adds
  support for "Rushmore" touchpads and paves way for adding support for
  "Dolphin" touchpads.

  There is also a new input driver for Goldfish emulator and also
  Android keyreset driver was folded into SysRq code.

  A few more drivers were updated with device tree bindings and others
  got some small cleanups and fixes."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (55 commits)
  Input: cyttsp-spi - remove duplicate MODULE_ALIAS()
  Input: tsc2005 - add MODULE_ALIAS
  Input: tegra-kbc - require CONFIG_OF, remove platform data
  Input: synaptics - initialize pointer emulation usage
  Input: MT - do not apply filtering on emulated events
  Input: bma150 - make some defines public and fix some comments
  Input: bma150 - fix checking pm_runtime_get_sync() return value
  Input: ALPS - enable trackstick on Rushmore touchpads
  Input: ALPS - add support for "Rushmore" touchpads
  Input: ALPS - make the V3 packet field decoder "pluggable"
  Input: ALPS - move pixel and bitmap info into alps_data struct
  Input: ALPS - fix command mode check
  Input: ALPS - rework detection of Pinnacle AGx touchpads
  Input: ALPS - move {addr,nibble}_command settings into alps_set_defaults()
  Input: ALPS - use function pointers for different protocol handlers
  Input: ALPS - rework detection sequence
  Input: ALPS - introduce helper function for repeated commands
  Input: ALPS - move alps_get_model() down below hw_init code
  Input: ALPS - copy "model" info into alps_data struct
  Input: ALPS - document the alps.h data structures
  ...

This reverts commit d57ada0c.

All of these are wrong and need to be reverted for now.

Cc: Manjunath Goudar <manjunath.goudar@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Tony Prisk <linux@prisktech.co.nz>
Cc: Alexey Charkov <alchark@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit 6ed3c43d.

All of these are wrong, and need to be reverted for now.

Cc: Manjunath Goudar <manjunath.goudar@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit e2ced166.

All of these are wrong, and need to be removed for now until they can
get reworked properly.

Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull battery updates from Anton Vorontsov:
 "Four new drivers:

   - goldfish_battery:

     This is Android Emulator battery driver.  Originally from Google,
     but Intel folks reshaped it for mainline

   - pm2301_charger:

     A new driver for ST-Ericsson 2301 Power Management chip, uses
     AB8500 battery management core

   - qnap-poweroff:

     The driver adds poweroff functionality for QNAP NAS boxes

   - restart-poweroff:

     A generic driver that implements 'power off by restarting'.  The
     actual poweroff functionality is implemented through a bootloader,
     so Linux' task is just to restart the box.  The driver is useful on
     Buffalo Linkstation LS-XHL and LS-CHLv2 boards.  Andrew Lunn worked
     on submitting the driver (as well as qnap-poweroff above).

  Additionally:

   - A lot of fixes for ab8500 drivers.  This is a part of efforts of
     syncing internal ST-Ericsson development tree with the mainline.
     Lee Jones @ Linaro worked on compilation and reshaping these
     series.

   - New health properties for the power supplies: "Watchdog timer
     expire" and "Safety timer expire"

   - As usual, a bunch of fixes/cleanups here and there"

* tag 'for-v3.9' of git://git.infradead.org/battery-2.6: (81 commits)
  bq2415x_charger: Add support for offline and 100mA mode
  generic-adc-battery: Fix forever loop in gab_remove()
  goldfish_battery: Add missing GENERIC_HARDIRQS dependency
  da9030_battery: Include notifier.h
  bq27x00_battery: Fix reporting battery temperature
  power/reset: Remove newly introduced __dev* annotations
  lp8727_charger: Small cleanup in naming
  ab8500_btemp: Demote initcall sequence
  ds2782_battery: Add power_supply_changed() calls for proper uevent support
  power: Add battery driver for goldfish emulator
  u8500-charger: Delay for USB enumeration
  ab8500-bm: Remove individual [charger|btemp|fg|chargalg] pdata structures
  ab8500-charger: Do not touch VBUSOVV bits
  ab8500-fg: Use correct battery charge full design
  pm2301: LPN mode control support
  pm2301: Enable vbat low monitoring
  ab8500-bm: Flush all work queues before suspending
  ab8500-fg: Go to INIT_RECOVERY when charger removed
  ab8500-charger: Add support for autopower on AB8505 and AB9540
  abx500-chargalg: Add new sysfs interface to get current charge status
  ...

Fix up fairly straightforward conflicts in the ab8500 driver.  But since
it seems to be ARM-specific, I can't even compile-test the result..

If our first THP installation for an MM is via the set_pmd_at() done
during khugepaged's collapsing we'll end up in tsb_grow() trying to do
a GFP_KERNEL allocation with several locks held.

Simply using GFP_ATOMIC in this situation is not the best option
because we really can't have this fail, so we'd really like to keep
this an order 0 GFP_KERNEL allocation if possible.

Also, doing the TSB allocation from khugepaged is a really bad idea
because we'll allocate it potentially from the wrong NUMA node in that
context.

So what we do is defer the hugepage TSB allocation until the first TLB
miss we take on a hugepage.  This is slightly tricky because we have
to handle two unusual cases:

1) Taking the first hugepage TLB miss in the window trap handler.
   We'll call the winfix_trampoline when that is detected.

2) An initial TSB allocation via TLB miss races with a hugetlb
   fault on another cpu running the same MM.  We handle this by
   unconditionally loading the TSB we see into the current cpu
   even if it's non-NULL at hugetlb_setup time.
Reported-by: Meelis Roos <mroos@ut.ee>
Signed-off-by: David S. Miller <davem@davemloft.net>

Accomodate the possibility that the TSB might be NULL at
the point that update_mmu_cache() is invoked.  This is
necessary because we will sometimes need to defer the TSB
allocation to the first fault that happens in the 'mm'.

Seperate out the hugepage PTE test into a seperate function
so that the logic is clearer.
Signed-off-by: David S. Miller <davem@davemloft.net>

We should "|= more_flags" rather than "= more_flags".
Reported-by: David Rientjes <rientjes@google.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull hwmon updates from Guenter Roeck:

 - New drivers for MAX6697 and compatibles and for INA209.

 - Added support for IT8771E, IT8772E, MAX34460, MAX34461, MCP98244, and
   ADT7420 to existing drivers.

 - Added support for additional attributes to various drivers.

 - Replaced SENSORS_LIMIT with clamp_val; retire SENSORS_LIMIT;

 - Clean up PMBus code to reduce its size; clean up adt7410 driver.

 - A couple of minor bug fixes as well as documentation cleanup.

 - Out-of-tree change: Replace SENSORS_LIMIT with clamp_val in
   platform/x86/eeepc-laptop driver.

* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (32 commits)
  hwmon: (ntc_thermistor): Fix sparse warnings
  hwmon: (adt7410) Add device table entry for the adt7420
  hwmon: (adt7410) Use I2C_ADDRS helper macro
  hwmon: (adt7410) Use the SIMPLE_DEV_PM_OPS helper macro
  hwmon: (adt7410) Let suspend/resume depend on CONFIG_PM_SLEEP
  hwmon: (adt7410) Clear unwanted bits in the config register
  hwmon: (jc42) Add support for MCP98244
  hwmon: (pmbus) Clean up for code size reduction
  hwmon: (pmbus/max34440) Add support for MAX34460 and MAX34461
  hwmon: (pmbus) Add support for word status register
  hwmon: (pmbus/zl6100) Add support for VMON/VDRV
  hwmon: (pmbus) Add function to clear sensor cache
  hwmon: (pmbus) Add support for additional voltage sensor
  hwmon: (pmbus) Use krealloc to allocate attribute memory
  hwmon: (pmbus) Simplify memory allocation for sensor attributes
  hwmon: (pmbus) Improve boolean handling
  hwmon: (pmbus) Simplify memory allocation for labels and booleans
  hwmon: (pmbus) Use dev variable to represent client->dev
  hwmon: (pmbus) Fix 'Macros with multiple statements' checkpatch error
  hwmon: (pmbus) Drop unnecessary error messages in probe error path
  ...

Pull pinctrl changes from Linus Walleij:
 "These are the main pinctrl changes for the v3.9 merge window.  The
  most interesting change by far is how the device core grabs pinctrl
  default handles avoiding the need to stick boilerplate into driver
  consumers.

   - Grabbing of default pinctrl handles from the device core.  These
     are the hunks hitting drivers/base.  All is ACKed by Greg, after a
     long discussion about different alternatives.

   - Some stuff also touches the MFD and ARM SoC trees, this has been
     coordinated and ACKed.

   - New drivers for:
     - The Tegra 114 sub-SoC
     - Allwinner sunxi
     - New ABx500 driver and sub-SoC drivers for AB8500, AB8505, AB9540
       and AB8540.

   - Make it possible for hogged pins to enter a sleep mode, and make it
     possible for drivers to control that mode.

   - Various clean-up, extensions and device tree support to various pin
     controllers."

* tag 'pinctrl-for-v3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (68 commits)
  pinctrl: tegra: add clfvs function to Tegra114 support
  pinctrl: generic: rename input schmitt disable
  pinctrl/pinconfig: add debug interface
  pinctrl: samsung: remove duplicated line
  ARM: ux500: use real AB8500 IRQ numbers instead of virtual ones
  ARM: ux500: remove irq_base property from platform_data
  pinctrl/abx500: use direct IRQ defines
  pinctrl/abx500: replace IRQ offsets with table read-in values
  pinctrl/abx500: move IRQ handling to ab8500-core
  pinctrl: exynos5440: remove erroneous __init
  pinctrl/abx500: adjust offset for get_mode()
  pinctrl/abx500: add Device Tree support
  pinctrl/abx500: align GPIO cluster boundaries
  pinctrl/abx500: prevent error path from corrupting returning error
  pinctrl: sunxi: add of_xlate function
  pinctrl/lantiq: fix pin number in ltq_pmx_gpio_request_enable
  pinctrl/lantiq: add functionality to falcon_pinconf_dbg_show
  pinctrl/lantiq: fix pinconfig parameters
  pinctrl/lantiq: one of the boot leds was defined incorrectly
  pinctrl/lantiq: only probe available pad controllers
  ...