- 23 Jan, 2020 35 commits
-
-
Oliver O'Halloran authored
Use the pnv_phb structure as the private data pointer for the debugfs files. This lets us delete some code and an open-coded use of hose->private_data. Signed-off-by:
Oliver O'Halloran <oohall@gmail.com> Reviewed-by:
Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190912052945.12589-1-oohall@gmail.com
-
Oliver O'Halloran authored
These functions can only be used on a SR-IOV capable physical function and they're only called in pcibios_sriov_enable / disable. Make them emit a warning in the future if they're used incorrectly and remove the dead code that checks if the device is a VF. Signed-off-by:
Sam Bobroff <sbobroff@linux.ibm.com> Signed-off-by:
-
Oliver O'Halloran authored
The powerpc PCI code requires that a pci_dn structure exists for all devices in the system. This is fine for real devices since at boot a pci_dn is created for each PCI device in the DT and it's fine for hotplugged devices since the hotplug slot driver will manage the pci_dn's devices in hotplug slots. For SR-IOV, we need the platform / pcibios to manage the pci_dn for virtual functions since firmware is unaware of VFs, and they aren't "hot plugged" in the traditional sense. Management of the pci_dn is handled by the, poorly named, functions: add_pci_dev_data() and remove_pci_dev_data(). The entire body of these functions is #ifdef`ed around CONFIG_PCI_IOV and they cannot be used in any other context, so make them only available when CONFIG_PCI_IOV is selected, and rename them to reflect their actual usage rather than having them masquerade as generic code. Signed-off-by:
-
Oliver O'Halloran authored
When disabling virtual functions on an SR-IOV adapter we currently do not correctly remove the EEH state for the now-dead virtual functions. When removing the pci_dn that was created for the VF when SR-IOV was enabled we free the corresponding eeh_dev without removing it from the child device list of the eeh_pe that contained it. This can result in crashes due to the use-after-free. Signed-off-by:
-
Oliver O'Halloran authored
The eeh_sysfs_remove_device() function is supposed to clear the EEH_DEV_SYSFS flag since it indicates the EEH sysfs entries have been added for a pci_dev. When the sysfs files are removed eeh_remove_device() the eeh_dev and the pci_dev have already been de-associated. This then causes the pci_dev_to_eeh_dev() call in eeh_sysfs_remove_device() to return NULL so the flag can't be cleared from the still-live eeh_dev. This problem is worked around in the caller by clearing the flag manually. However, this behaviour doesn't make a whole lot of sense, so this patch fixes it by: a) Re-ordering eeh_remove_device() so that eeh_sysfs_remove_device() is called before de-associating the pci_dev and eeh_dev. b) Making eeh_sysfs_remove_device() emit a warning if there's no corresponding eeh_dev for a pci_dev. The paths where the sysfs files are only reachable if EEH was setup for the device for the device in the first place so hitting this warning indicates a programming error. Signed-off-by:
-
Oliver O'Halloran authored
In eeh_notify_resume_show() the pci_dn for the device is looked up once in the declaration block and then once after checking for a NULL eeh_dev. Remove the second lookup since it's pointless. Signed-off-by:
-
Oliver O'Halloran authored
There are several EEH sysfs properties that only exists when the "ibm,is-open-sriov-pf" property appears in the device tree node of the PCI device. This used on pseries to indicate to the guest that the hypervisor allows the guest to configure the SR-IOV capability. Doing this requires some handshaking between the guest, hypervisor and userspace when a VF is EEH frozen which is why these properties exist. This is all dead code on non-pseries platforms so wrap it in an #ifdef CONFIG_PPC_PSERIES to make the dependency clearer. Signed-off-by:
-
Oliver O'Halloran authored
The EEH_ATTR_SHOW() helper is used to display fields from struct eeh_dev not struct pci_dn. Signed-off-by:
-
Oliver O'Halloran authored
At the point where we start inserting ranges into the EEH address cache the binding between pci_dev and eeh_dev has already been set up. Instead of consulting the pci_dn tree we can retrieve the eeh_dev directly using pci_dev_to_eeh_dev(). Signed-off-by:
-
Frederic Barrat authored
The PCI hotplug framework is used to update the devices when a new image is written to the FPGA. Reviewed-by:
Alastair D'Silva <alastair@d-silva.org> Reviewed-by:
Andrew Donnellan <ajd@linux.ibm.com> Signed-off-by:
Frederic Barrat <fbarrat@linux.ibm.com> Signed-off-by:
-
Frederic Barrat authored
An opencapi slot doesn't have an associated bridge device. It's not needed for operation, but any warning is displayed through pci_warn() which uses the pci_dev struct of the assocated bridge device. So wrap those warning so that a different trace mechanism can be used if it's an opencapi slot. Reviewed-by:
-
Frederic Barrat authored
The driver only allows to disable a slot in the POPULATED state. However, if an error occurs while enabling the slot, say because the link couldn't be trained, then the POPULATED state may not be reached, yet the power state of the slot is on. So allow to disable a slot in the REGISTERED state. Removing the devices will do nothing since it's not populated, and we'll set the power state of the slot back to off. Reviewed-by:
-
Frederic Barrat authored
Add the opencapi PHBs to the list of PHBs being scanned to look for slots. Signed-off-by:
-
Frederic Barrat authored
When changing the slot state, if opal hits an error and tells as such in the asynchronous reply, the warning "Wrong msg" is logged, which is rather confusing. Instead we can reuse the better message which is already used when we couldn't submit the asynchronous opal request initially. Reviewed-by:
-
Frederic Barrat authored
On powernv, when removing a device through hotplug, the following warning is logged: Invalid refcount <.> on <...> It may be incorrect, the refcount may be set to a higher value than 1 and be valid. of_detach_node() can drop more than one reference. As it doesn't seem trivial to assert the correct value, let's remove the warning. Reviewed-by: -
Frederic Barrat authored
Unlike real PCI slots, opencapi slots are directly associated to the (virtual) opencapi PHB, there's no intermediate bridge. So when looking for a slot ID, we must start the search from the device node itself and not its parent. Also, the slot ID is not attached to a specific bdfn, so let's build it from the PHB ID, like skiboot. Signed-off-by:
-
Frederic Barrat authored
With hotplug, an opencapi device can now go away. It needs to be released, mostly to clean up its PE state. We were previously not defining any device callback. We can reuse the standard PCI release callback, it does a bit too much for an opencapi device, but it's harmless, and only needs minor tuning. Also separate the undo of the PELT-V code in a separate function, it is not needed for NPU devices and it improves a bit the readability of the code. Signed-off-by:
-
Frederic Barrat authored
The PE for an opencapi device was set as part of a late PHB fixup operation, when creating the PHB. To use the PCI hotplug framework, this is not going to work, as the PHB stays the same, it's only the devices underneath which are updated. For regular PCI devices, it is done as part of the reconfiguration of the bridge, but for opencapi PHBs, we don't have an intermediate bridge. So let's define the PE when the device is enabled. PEs are meaningless for opencapi, the NPU doesn't define them and opal is not doing anything with them. Reviewed-by:
-
Frederic Barrat authored
Protect the PHB's list of PE. Probably not needed as long as it was populated during PHB creation, but it feels right and will become required once we can add/remove opencapi devices on hotplug. Reviewed-by:
-
Frederic Barrat authored
The pci_dn structure used to store a pointer to the struct pci_dev, so taking a reference on the device was required. However, the pci_dev pointer was later removed from the pci_dn structure, but the reference was kept for the npu device. See commit 902bdc57 ("powerpc/powernv/idoa: Remove unnecessary pcidev from pci_dn"). We don't need to take a reference on the device when assigning the PE as the struct pnv_ioda_pe is cleaned up at the same time as the (physical) device is released. Doing so prevents the device from being released, which is a problem for opencapi devices, since we want to be able to remove them through PCI hotplug. Now the ugly part: nvlink npu devices are not meant to be released. Because of the above, we've always leaked a reference and simply removing it now is dangerous and would likely require more work. There's currently no release device callback for nvlink devices for example. So to be safe, this patch leaks a reference on the npu device, but only for nvlink and not opencapi. Signed-off-by:
-
Christophe Leroy authored
Various optimisations by inverting branches and removing redundant instructions. Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by:
-
Christophe Leroy authored
clock_getres returns hrtimer_res for all clocks but coarse ones for which it returns KTIME_LOW_RES. return EINVAL for unknown clocks. Signed-off-by:
-
Christophe Leroy authored
Use LOAD_REG_IMMEDIATE() to load registers with immediate value. Signed-off-by:
-
Christophe Leroy authored
On PPC32, the cache lines have a fixed size known at build time. Don't read it from the datapage. Signed-off-by:
-
Christophe Leroy authored
__get_datapage() is only a few instructions to retrieve the address of the page where the kernel stores data to the VDSO. By inlining this function into its users, a bl/blr pair and a mflr/mtlr pair is avoided, plus a few reg moves. The improvement is noticeable (about 55 nsec/call on an 8xx) vdsotest before the patch: gettimeofday: vdso: 731 nsec/call clock-gettime-realtime-coarse: vdso: 668 nsec/call clock-gettime-monotonic-coarse: vdso: 745 nsec/call vdsotest after the patch: gettimeofday: vdso: 677 nsec/call clock-gettime-realtime-coarse: vdso: 613 nsec/call clock-gettime-monotonic-coarse: vdso: 690 nsec/call Signed-off-by:
-
Christophe Leroy authored
This is copied and adapted from commit 5c929885 ("powerpc/vdso64: Add support for CLOCK_{REALTIME/MONOTONIC}_COARSE") from Santosh Sivaraj <santosh@fossix.org> Benchmark from vdsotest-all: clock-gettime-realtime: syscall: 3601 nsec/call clock-gettime-realtime: libc: 1072 nsec/call clock-gettime-realtime: vdso: 931 nsec/call clock-gettime-monotonic: syscall: 4034 nsec/call clock-gettime-monotonic: libc: 1213 nsec/call clock-gettime-monotonic: vdso: 1076 nsec/call clock-gettime-realtime-coarse: syscall: 2722 nsec/call clock-gettime-realtime-coarse: libc: 805 nsec/call clock-gettime-realtime-coarse: vdso: 668 nsec/call clock-gettime-monotonic-coarse: syscall: 2949 nsec/call clock-gettime-monotonic-coarse: libc: 882 nsec/call clock-gettime-monotonic-coarse: vdso: 745 nsec/call Additional test passed with: vdsotest -d 30 clock-gettime-monotonic-coarse verify Signed-off-by:
-
Christophe Leroy authored
Commit 18ad51dd ("powerpc: Add VDSO version of getcpu") added getcpu() for PPC64 only, by making use of a user readable general purpose SPR. PPC32 doesn't have any such SPR. For non SMP, just return CPU id 0 from the VDSO directly. PPC32 doesn't support CONFIG_NUMA so NUMA node is always 0. Before the patch, vdsotest reported: getcpu: syscall: 1572 nsec/call getcpu: libc: 1787 nsec/call getcpu: vdso: not tested Now, vdsotest reports: getcpu: syscall: 1582 nsec/call getcpu: libc: 502 nsec/call getcpu: vdso: 187 nsec/call Signed-off-by:
-
Christophe Leroy authored
Since commit 0f0581b2 ("spi: fsl: Convert to use CS GPIO descriptors"), the prefered way to define chipselect GPIOs is using 'cs-gpios' property instead of the legacy 'gpios' property. Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Christophe Leroy authored
8xx is now able to support any range length so range tests can be enabled. Signed-off-by:
-
Christophe Leroy authored
Unlike standard powerpc, Powerpc 8xx doesn't have SPRN_DABR, but it has a breakpoint support based on a set of comparators which allow more flexibility. Commit 4ad8622d ("powerpc/8xx: Implement hw_breakpoint") implemented breakpoints by emulating the DABR behaviour. It did this by setting one comparator the match 4 bytes at breakpoint address and the other comparator to match 4 bytes at breakpoint address + 4. Rewrite 8xx hw_breakpoint to make breakpoints match all addresses defined by the breakpoint address and length by making full use of comparators. Now, comparator E is set to match any address greater than breakpoint address minus one. Comparator F is set to match any address lower than breakpoint address plus breakpoint length. Addresses are aligned to 32 bits. When the breakpoint range starts at address 0, the breakpoint is set to match comparator F only. When the breakpoint range end at address 0xffffffff, the breakpoint is set to match comparator E only. Otherwise the breakpoint is set to match comparator E and F. At the same time, use registers bit names instead of hardcoded values. Signed-off-by:
-
Christophe Leroy authored
When not using large TLBs, the IMMR region is still mapped as a whole block in the FIXMAP area. Properly report that the IMMR region is block-mapped even when not using large TLBs. Signed-off-by:
-
Christophe Leroy authored
ptdump_check_wx() is called from mark_rodata_ro() which only exists when CONFIG_STRICT_KERNEL_RWX is selected. Fixes: 453d87f6 ("powerpc/mm: Warn if W+X pages found on boot") Signed-off-by:
-
Christophe Leroy authored
Verification cannot rely on simple bit checking because on some platforms PAGE_RW is 0, checking that a page is not W means checking that PAGE_RO is set instead of checking that PAGE_RW is not set. Use pte helpers instead of checking bits. Fixes: 453d87f6 ("powerpc/mm: Warn if W+X pages found on boot") Cc: stable@vger.kernel.org # v5.2+ Signed-off-by:
-
Christophe Leroy authored
ptdump_check_wx() also have to be called when pages are mapped by blocks. Fixes: 453d87f6 ("powerpc/mm: Warn if W+X pages found on boot") Signed-off-by:
-
Christophe Leroy authored
Selecting CONFIG_PPC_DEBUG_WX only impacts ptdump and pgtable_32/64 init calls. Declaring related functions in asm/pgtable.h implies rebuilding almost everything. Move ptdump_check_wx() declaration in mm/mmu_decl.h Signed-off-by:
-
- 16 Jan, 2020 4 commits
-
-
Nicholas Piggin authored
This implements the tricky tracing and soft irq handling bits in C, leaving the low level bit to asm. A functional difference is that this redirects the interrupt exit to a return stub to execute blr, rather than the lr address itself. This is probably barely measurable on real hardware, but it keeps the link stack balanced. Tested with QEMU. Signed-off-by:
Nicholas Piggin <npiggin@gmail.com> [mpe: Move power4_fixup_nap back into exceptions-64s.S] Signed-off-by:
-
Julia Lawall authored
Mmgrab was introduced in commit f1f10076 ("mm: add new mmgrab() helper") and most of the kernel was updated to use it. Update a remaining file. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) <smpl> @@ expression e; @@ - atomic_inc(&e->mm_count); + mmgrab(e); </smpl> Signed-off-by:
Julia Lawall <Julia.Lawall@inria.fr> Acked-by:
-
Russell Currey authored
I have tested this with the Radix MMU and everything seems to work, and the previous patch for Hash seems to fix everything too. STRICT_KERNEL_RWX should still be disabled by default for now. Please test STRICT_KERNEL_RWX + RELOCATABLE! Signed-off-by:
Russell Currey <ruscur@russell.cc> Signed-off-by:
-
Russell Currey authored
With STRICT_KERNEL_RWX on in a relocatable kernel under the hash MMU, if the position the kernel is loaded at is not 16M aligned things go horribly wrong. Specifically hash__mark_initmem_nx() will call hash__change_memory_range() which then aligns down the start address, and due to the text not being 16M aligned causes some of the kernel text to be marked non-executable. We can avoid this when selecting the linear mapping size, so do so and print a warning. I tested this for various alignments and as long as the position is 64K aligned it's fine (the base requirement for powerpc). Signed-off-by:
-
- 14 Jan, 2020 1 commit
-
-
Pingfan Liu authored
In lmb_is_removable(), if a section is not present, it should continue to test the rest of the sections in the block. But the current code fails to do so. Fixes: 51925fb3 ("powerpc/pseries: Implement memory hotplug remove in the kernel") Cc: stable@vger.kernel.org # v4.1+ Signed-off-by:
Pingfan Liu <kernelfans@gmail.com> Signed-off-by:
-
