In order to be able to use the mapping/unmapping helpers for IPSEC
it needs to be move upper in the file
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Use helper for all modifications to talitos_ptr in preparation to
the implementation of AEAD for SEC1

to_talitos_ptr_extent_clear() has been removed in favor of
to_talitos_ptr_ext_set() to set any value and
to_talitos_ptr_ext_or() to or the extent field with a value
name has been shorten to help keeping single lines of 80 chars
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

LS1043A has a SEC v5.4 security engine.
For now don't add rtic or sec_mon subnodes, since these features
haven't been tested yet.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The first read on an Alea takes about 1.8 seconds, more than the
timeout value waiting for the read.  As a consequence, later URB reuse
causes the warning given below.  To avoid this, we increase the wait
time for the first read on the Alea.

[   78.293247] WARNING: CPU: 3 PID: 1892 at drivers/usb/core/urb.c:338 usb_submit_urb+0x2b4/0x580 [usbcore]
[   78.293250] URB ffff8802135be3c0 submitted while active
[   78.293252] Modules linked in: chaoskey(+) rng_core rfcomm binfmt_misc bnep cfg80211 nfsd auth_rpcgss oid_registry nfs_acl nfs lockd grace fscache sunrpc bridge stp llc tun snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic iTCO_wdt iTCO_vendor_support nls_utf8 nls_cp437 vfat fat intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel efi_pstore kvm irqbypass pcspkr btusb btrtl btbcm btintel uvcvideo joydev bluetooth videobuf2_vmalloc videobuf2_memops efivars videobuf2_v4l2 serio_raw i2c_i801 videobuf2_core videodev cdc_mbim media lpc_ich shpchp mfd_core cdc_ncm usbnet mii cdc_wdm cdc_acm evdev snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core i915 snd_pcm snd_timer i2c_algo_bit drm_kms_helper wmi thinkpad_acpi drm nvram mei_me mei snd soundcore rfkill ac battery i2c_core
[   78.293335]  video button tpm_tis tpm fuse parport_pc ppdev lp parport autofs4 ext4 crc16 jbd2 mbcache algif_skcipher af_alg hid_generic usbhid hid dm_crypt dm_mod sg sr_mod cdrom sd_mod crct10dif_pclmul crc32_pclmul crc32c_intel jitterentropy_rng sha256_generic hmac drbg aesni_intel xhci_pci aes_x86_64 ahci glue_helper xhci_hcd ehci_pci lrw libahci gf128mul ablk_helper cryptd libata sdhci_pci psmouse sdhci scsi_mod ehci_hcd mmc_core usbcore usb_common thermal
[   78.293402] CPU: 3 PID: 1892 Comm: hwrng Not tainted 4.7.0-rc1-linux-14+ #16
[   78.293405] Hardware name: LENOVO 232577G/232577G, BIOS G2ET92WW (2.52 ) 02/22/2013
[   78.293408]  0000000000000000 ffffffff812dfa0f ffff8801fa5b3d68 0000000000000000
[   78.293413]  ffffffff81072224 ffff8802135be3c0 ffff8801fa5b3db8 ffff880212e44210
[   78.293418]  0000000000000040 ffff880209fb32c0 ffff880212e44200 ffffffff8107228f
[   78.293422] Call Trace:
[   78.293432]  [<ffffffff812dfa0f>] ? dump_stack+0x5c/0x7d
[   78.293437]  [<ffffffff81072224>] ? __warn+0xc4/0xe0
[   78.293441]  [<ffffffff8107228f>] ? warn_slowpath_fmt+0x4f/0x60
[   78.293451]  [<ffffffff810a46a2>] ? enqueue_task_fair+0xcd2/0x1260
[   78.293463]  [<ffffffffa001ec54>] ? usb_submit_urb+0x2b4/0x580 [usbcore]
[   78.293474]  [<ffffffff8140c2e5>] ? __pm_runtime_resume+0x55/0x70
[   78.293484]  [<ffffffffa0825212>] ? _chaoskey_fill+0x132/0x250 [chaoskey]
[   78.293485] usbcore: registered new interface driver chaoskey
[   78.293493]  [<ffffffff810aed50>] ? wait_woken+0x90/0x90
[   78.293500]  [<ffffffffa06448c0>] ? devm_hwrng_register+0x80/0x80 [rng_core]
[   78.293505]  [<ffffffffa0825907>] ? chaoskey_rng_read+0x127/0x140 [chaoskey]
[   78.293511]  [<ffffffffa06448c0>] ? devm_hwrng_register+0x80/0x80 [rng_core]
[   78.293515]  [<ffffffffa064492e>] ? hwrng_fillfn+0x6e/0x120 [rng_core]
[   78.293520]  [<ffffffff8108fb5f>] ? kthread+0xcf/0xf0
[   78.293529]  [<ffffffff81596d5f>] ? ret_from_fork+0x1f/0x40
[   78.293535]  [<ffffffff8108fa90>] ? kthread_park+0x50/0x50
Signed-off-by: Bob Ham <bob.ham@collabora.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Adds support for the Araneus Alea I USB hardware Random Number
Generator which is interfaced with in exactly the same way as the
Altus Metrum ChaosKey.  We just add the appropriate device ID and
modify the config help text.
Signed-off-by: Bob Ham <bob.ham@collabora.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Move hash to 0xe to free up the space for acomp/scomp
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Remove unused header cpumask.h from crypto/ablkcipher.c.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Algorithms can be registered only once. So skip registration of
algorithms if already registered (i.e. in case we have two AES cores
in the system.)
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Currently there are several checkpatch warnings in the sha1_mb.c file:
'WARNING: line over 80 characters' in the sha1_mb.c file. Also, the
syntax of some multi-line comments are not correct. This patch fixes
these issues.
Signed-off-by: Megha Dey <megha.dey@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The CTR DRBG code always set the key for each sym cipher invocation even
though the key has not been changed.

The patch ensures that the setkey is only invoked when a new key is
generated by the DRBG.

With this patch, the CTR DRBG performance increases by more than 150%.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Bring some consistency by:
1. Replacing fixed-space indentation of structure members with just
   tabs.
2. Remove indentation in declaration of local variable between type and
   name.  Driver was mixing usage of such indentation and lack of it.
   When removing indentation, reorder variables in
   reversed-christmas-tree order with first variables being initialized
   ones.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Read the requested number of data from the fifo
Signed-off-by: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add support for the random number generator to the Northstar Plus
SoC device tree.
Signed-off-by: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This supports the random number generator available in NSP SoC.
Masks the rng interrupt for NSP.
Signed-off-by: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com>
Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Document the bindings used by Northstar Plus(NSP) SoC random number
generator.
Signed-off-by: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com>
Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

mpi_read_from_buffer() and mpi_read_raw_data() do basically the same thing
except that the former extracts the number of payload bits from the first
two bytes of the input buffer.

Besides that, the data copying logic is exactly the same.

Replace the open coded buffer to MPI instance conversion by a call to
mpi_read_raw_data().
Signed-off-by: Nicolai Stange <nicstange@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The first two bytes of the input buffer encode its expected length and
mpi_read_from_buffer() prints a console message if the given buffer is too
short.

However, there are some oddities with how this message is printed:
- It is printed at the default loglevel. This is different from the
  one used in the case that the first two bytes' value is unsupportedly
  large, i.e. KERN_INFO.
- The format specifier '%d' is used for unsigned ints.
- It prints the values of nread and *ret_nread. This is redundant since
  the former is always the latter + 1.

Clean this up as follows:
- Use pr_info() rather than printk() with no loglevel.
- Use the format specifiers '%u' in place if '%d'.
- Do not print the redundant 'nread' but the more helpful 'nbytes' value.
Signed-off-by: Nicolai Stange <nicstange@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Currently, if the input buffer is shorter than the expected length as
indicated by its first two bytes, an MPI instance of this expected length
will be allocated and filled with as much data as is available. The rest
will remain uninitialized.

Instead of leaving this condition undetected, an error code should be
reported to the caller.

Since this situation indicates that the input buffer's first two bytes,
encoding the number of expected bits, are garbled, -EINVAL is appropriate
here.

If the input buffer is shorter than indicated by its first two bytes,
make mpi_read_from_buffer() return -EINVAL.
Get rid of the 'nread' variable: with the new semantics, the total number
of bytes read from the input buffer is known in advance.
Signed-off-by: Nicolai Stange <nicstange@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Currently, if digsig_verify_rsa() detects that the modulo's length is zero,
i.e. mlen == 0, it returns -ENOMEM which doesn't really fit here.

Make digsig_verify_rsa() return -EINVAL upon mlen == 0.
Signed-off-by: Nicolai Stange <nicstange@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

mpi_read_from_buffer() reads a MPI from a buffer into a newly allocated
MPI instance. It expects the buffer's leading two bytes to contain the
number of bits, followed by the actual payload.

On failure, it returns NULL and updates the in/out argument ret_nread
somewhat inconsistently:
- If the given buffer is too short to contain the leading two bytes
  encoding the number of bits or their value is unsupported, then
  ret_nread will be cleared.
- If the allocation of the resulting MPI instance fails, ret_nread is left
  as is.

The only user of mpi_read_from_buffer(), digsig_verify_rsa(), simply checks
for a return value of NULL and returns -ENOMEM if that happens.

While this is all of cosmetic nature only, there is another error condition
which currently isn't detectable by the caller of mpi_read_from_buffer():
if the given buffer is too small to hold the number of bits as encoded in
its first two bytes, the return value will be non-NULL and *ret_nread > 0.

In preparation of communicating this condition to the caller, let
mpi_read_from_buffer() return error values by means of the ERR_PTR()
mechanism.

Make the sole caller of mpi_read_from_buffer(), digsig_verify_rsa(),
check the return value for IS_ERR() rather than == NULL. If IS_ERR() is
true, return the associated error value rather than the fixed -ENOMEM.
Signed-off-by: Nicolai Stange <nicstange@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The number of bits, nbits, is calculated in mpi_read_raw_data() as follows:

  nbits = nbytes * 8;

Afterwards, the number of leading zero bits of the first byte get
subtracted:

  nbits -= count_leading_zeros(buffer[0]);

However, count_leading_zeros() takes an unsigned long and thus,
the u8 gets promoted to an unsigned long.

Thus, the above doesn't subtract the number of leading zeros in the most
significant nonzero input byte from nbits, but the number of leading
zeros of the most significant nonzero input byte promoted to unsigned long,
i.e. BITS_PER_LONG - 8 too many.

Fix this by subtracting

  count_leading_zeros(...) - (BITS_PER_LONG - 8)

from nbits only.

Fixes: e1045992 ("MPILIB: Provide a function to read raw data into an
                     MPI")
Signed-off-by: Nicolai Stange <nicstange@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

In mpi_read_raw_data(), unsigned nbits is calculated as follows:

 nbits = nbytes * 8;

and redundantly cleared later on if nbytes == 0:

  if (nbytes > 0)
    ...
  else
    nbits = 0;

Purge this redundant clearing for the sake of clarity.
Signed-off-by: Nicolai Stange <nicstange@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

mpi_set_buffer() has no in-tree users and similar functionality is provided
by mpi_read_raw_data().

Remove mpi_set_buffer().
Signed-off-by: Nicolai Stange <nicstange@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch fixes the following warning:
drivers/char/hw_random/stm32-rng.c: In function 'stm32_rng_read':
drivers/char/hw_random/stm32-rng.c:82:19: warning: 'sr' may be used
                                        uninitialized in this function
Reported-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Submitters of device tree binding documentation may forget to CC
the subsystem maintainer if this is missing.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Submitters of device tree binding documentation may forget to CC
the subsystem maintainer if this is missing.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: David S. Miller <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This basically adds support for ls1043a platform.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

There are SoCs like LS1043A where CAAM endianness (BE) does not match
the default endianness of the core (LE).
Moreover, there are requirements for the driver to handle cases like
CPU_BIG_ENDIAN=y on ARM-based SoCs.
This requires for a complete rewrite of the I/O accessors.

PPC-specific accessors - {in,out}_{le,be}XX - are replaced with
generic ones - io{read,write}[be]XX.

Endianness is detected dynamically (at runtime) to allow for
multiplatform kernels, for e.g. running the same kernel image
on LS1043A (BE CAAM) and LS2080A (LE CAAM) armv8-based SoCs.

While here: debugfs entries need to take into consideration the
endianness of the core when displaying data. Add the necessary
glue code so the entries remain the same, but they are properly
read, regardless of the core and/or SEC endianness.

Note: pdb.h fixes only what is currently being used (IPsec).
Reviewed-by: Tudor Ambarus <tudor-dan.ambarus@nxp.com>
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Alex Porosanu <alexandru.porosanu@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The offset field is 13 bits wide; make sure we don't overwrite more than
that in the caam hardware scatter gather structure.
Signed-off-by: Cristian Stoica <cristian.stoica@freescale.com>
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This will allow device drivers to consistently use io{read,write}XX
also for 64-bit accesses.
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This will allow device drivers to consistently use io{read,write}XXbe
also for 64-bit accesses.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Alex Porosanu <alexandru.porosanu@nxp.com>
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This will allow device drivers to consistently use io{read,write}XX
also for 64-bit accesses.
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

While reviewing the addition of io{read,write}64be accessors, Arnd

-finds a potential problem:
"If an architecture overrides readq/writeq to have barriers but does
not override ioread64be/iowrite64be, this will lack the barriers and
behave differently from the little-endian version. I think the only
affected architecture is ARC, since ARM and ARM64 both override the
big-endian accessors to have the correct barriers, and all others
don't use barriers at all."

-suggests a fix for the same problem in existing code (16/32-bit
accessors); the fix leads "to a double-swap on architectures that
don't override the io{read,write}{16,32}be accessors, but it will
work correctly on all architectures without them having to override
these accessors."
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The sizeof(*ctx->dec_cd) and sizeof(*ctx->enc_cd) are equal,
but we should use the correct one for freeing memory anyway.
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The CRYPTO_MSG_GETALG netlink message type provides a buffer to the
kernel to retrieve information from the kernel. The data buffer will not
provide any input and will not be read. Hence the nlmsg_parse is not
applicable to this netlink message type.

This patch fixes the following kernel log message when using this
netlink interface:

netlink: 208 bytes leftover after parsing attributes in process `XXX'.

Patch successfully tested with libkcapi from [1] which uses
CRYPTO_MSG_GETALG to obtain cipher-specific information from the kernel.

[1] http://www.chronox.de/libkcapi.htmlSigned-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add the MODULE_ALIAS for the cra_driver_name of the different ciphers to
allow an automated loading if a driver name is used.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Pull crypto fixes from Herbert Xu:
 "This fixes the following issues:

   - missing selection in public_key that may result in a build failure

   - Potential crash in error path in omap-sham

   - ccp AES XTS bug that affects requests larger than 4096"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: ccp - Fix AES XTS error for request sizes above 4096
  crypto: public_key: select CRYPTO_AKCIPHER
  crypto: omap-sham - potential Oops on error in probe

Pull SCSI fixes from James Bottomley:
 "This is a set of four fixes noticed in the merge window.  The aacraid
  one is an optimisation, the mp3sas one fixes a spurious printk, the
  sd_check_events one fixes a theoretical race and the failed zero
  length commands fixes a bug in our completion/retry routines that has
  been causing problems in the field"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  aacraid: do not activate events on non-SRC adapters
  mpt3sas: add missing curly braces
  sd: get disk reference in sd_check_events()
  scsi_lib: correctly retry failed zero length REQ_TYPE_FS commands