- 17 Aug, 2012 1 commit
-
-
Konrad Rzeszutek Wilk authored
If P2M leaf is completly packed with INVALID_P2M_ENTRY or with 1:1 PFNs (so IDENTITY_FRAME type PFNs), we can swap the P2M leaf with either a p2m_missing or p2m_identity respectively. The old page (which was created via extend_brk or was grafted on from the mfn_list) can be re-used for setting new PFNs. This also means we can remove git commit: 5bc6f988 xen/p2m: Reserve 8MB of _brk space for P2M leafs when populating back which tried to fix this. and make the amount that is required to be reserved much smaller. CC: stable@vger.kernel.org # for 3.5 only. Signed-off-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
- 16 Aug, 2012 1 commit
-
-
Konrad Rzeszutek Wilk authored
This reverts commit 00e37bdb. During shutdown of PVHVM guests with more than 2VCPUs on certain machines we can hit the race where the replaced shared_info is not replaced fast enough and the PV time clock retries reading the same area over and over without any any success and is stuck in an infinite loop. Acked-by:
Olaf Hering <olaf@aepfle.de> Signed-off-by:
-
- 02 Aug, 2012 1 commit
-
-
Konrad Rzeszutek Wilk authored
When we release pages back during bootup: Freeing 9d-100 pfn range: 99 pages freed Freeing 9cf36-9d0d2 pfn range: 412 pages freed Freeing 9f6bd-9f6bf pfn range: 2 pages freed Freeing 9f714-9f7bf pfn range: 171 pages freed Freeing 9f7e0-9f7ff pfn range: 31 pages freed Freeing 9f800-100000 pfn range: 395264 pages freed Released 395979 pages of unused memory We then try to populate those pages back. In the P2M tree however the space for those leafs must be reserved - as such we use extend_brk. We reserve 8MB of _brk space, which means we can fit over 1048576 PFNs - which is more than we should ever need. Without this, on certain compilation of the kernel we would hit: (XEN) domain_crash_sync called from entry.S (XEN) CPU: 0 (XEN) RIP: e033:[<ffffffff818aad3b>] (XEN) RFLAGS: 0000000000000206 EM: 1 CONTEXT: pv guest (XEN) rax: ffffffff81a7c000 rbx: 000000000000003d rcx: 0000000000001000 (XEN) rdx: ffffffff81a7b000 rsi: 0000000000001000 rdi: 0000000000001000 (XEN) rbp: ffffffff81801cd8 rsp: ffffffff81801c98 r8: 0000000000100000 (XEN) r9: ffffffff81a7a000 r10: 0000000000000001 r11: 0000000000000003 (XEN) r12: 0000000000000004 r13: 0000000000000004 r14: 000000000000003d (XEN) r15: 00000000000001e8 cr0: 000000008005003b cr4: 00000000000006f0 (XEN) cr3: 0000000125803000 cr2: 0000000000000000 (XEN) ds: 0000 es: 0000 fs: 0000 gs: 0000 ss: e02b cs: e033 (XEN) Guest stack trace from rsp=ffffffff81801c98: .. which is extend_brk hitting a BUG_ON. Interestingly enough, most of the time we are not going to hit this b/c the _brk space is quite large (v3.5): ffffffff81a25000 B __brk_base ffffffff81e43000 B __brk_limit = ~4MB. vs earlier kernels (with this back-ported), the space is smaller: ffffffff81a25000 B __brk_base ffffffff81a7b000 B __brk_limit = 344 kBytes. where we would certainly hit this and hit extend_brk. Note that git commit c3d93f88 (xen: populate correct number of pages when across mem boundary (v2)) exposed this bug). [v1: Made it 8MB of _brk space instead of 4MB per Jan's suggestion] CC: stable@vger.kernel.org #only for 3.5 Signed-off-by:
-
- 19 Jul, 2012 18 commits
-
-
zhenzhong.duan authored
When populate pages across a mem boundary at bootup, the page count populated isn't correct. This is due to mem populated to non-mem region and ignored. Pfn range is also wrongly aligned when mem boundary isn't page aligned. For a dom0 booted with dom_mem=3368952K(0xcd9ff000-4k) dmesg diff is: [ 0.000000] Freeing 9e-100 pfn range: 98 pages freed [ 0.000000] 1-1 mapping on 9e->100 [ 0.000000] 1-1 mapping on cd9ff->100000 [ 0.000000] Released 98 pages of unused memory [ 0.000000] Set 206435 page(s) to 1-1 mapping -[ 0.000000] Populating cd9fe-cda00 pfn range: 1 pages added +[ 0.000000] Populating cd9fe-cd9ff pfn range: 1 pages added +[ 0.000000] Populating 100000-100061 pfn range: 97 pages added [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: 0000000000000000 - 000000000009e000 (usable) [ 0.000000] Xen: 00000000000a0000 - 0000000000100000 (reserved) [ 0.000000] Xen: 0000000000100000 - 00000000cd9ff000 (usable) [ 0.000000] Xen: 00000000cd9ffc00 - 00000000cda53c00 (ACPI NVS) ... [ 0.000000] Xen: 0000000100000000 - 0000000100061000 (usable) [ 0.000000] Xen: 0000000100061000 - 000000012c000000 (unusable) ... [ 0.000000] MEMBLOCK configuration: ... -[ 0.000000] reserved[0x4] [0x000000cd9ff000-0x000000cd9ffbff], 0xc00 bytes -[ 0.000000] reserved[0x5] [0x00000100000000-0x00000100060fff], 0x61000 bytes Related xen memory layout: (XEN) Xen-e820 RAM map: (XEN) 0000000000000000 - 000000000009ec00 (usable) (XEN) 00000000000f0000 - 0000000000100000 (reserved) (XEN) 0000000000100000 - 00000000cd9ffc00 (usable) Signed-off-by:
Zhenzhong Duan <zhenzhong.duan@oracle.com> [v2: If xen_do_chunk fail(populate), abort this chunk and any others] Suggested by David, thanks. Signed-off-by:
-
Olaf Hering authored
Currently kexec in a PVonHVM guest fails with a triple fault because the new kernel overwrites the shared info page. The exact failure depends on the size of the kernel image. This patch moves the pfn from RAM into MMIO space before the kexec boot. The pfn containing the shared_info is located somewhere in RAM. This will cause trouble if the current kernel is doing a kexec boot into a new kernel. The new kernel (and its startup code) can not know where the pfn is, so it can not reserve the page. The hypervisor will continue to update the pfn, and as a result memory corruption occours in the new kernel. One way to work around this issue is to allocate a page in the xen-platform pci device's BAR memory range. But pci init is done very late and the shared_info page is already in use very early to read the pvclock. So moving the pfn from RAM to MMIO is racy because some code paths on other vcpus could access the pfn during the small window when the old pfn is moved to the new pfn. There is even a small window were the old pfn is not backed by a mfn, and during that time all reads return -1. Because it is not known upfront where the MMIO region is located it can not be used right from the start in xen_hvm_init_shared_info. To minimise trouble the move of the pfn is done shortly before kexec. This does not eliminate the race because all vcpus are still online when the syscore_ops will be called. But hopefully there is no work pending at this point in time. Also the syscore_op is run last which reduces the risk further. Signed-off-by:
-
Olaf Hering authored
init_hvm_pv_info is called only in PVonHVM context, move it into ifdef. init_hvm_pv_info does not fail, make it a void function. remove arguments from init_hvm_pv_info because they are not used by the caller. Signed-off-by:
-
Olaf Hering authored
Both have type struct shared_info so no cast is needed. Signed-off-by:
-
Olaf Hering authored
While debugging kexec issues in a PVonHVM guest I modified xen_hvm_platform() to return false to disable all PV drivers. This caused a crash in platform_pci_init() because it expects certain data structures to be initialized properly. To avoid such a crash make sure the driver is initialized only if running in a Xen guest. Signed-off-by:
-
Olaf Hering authored
Add xs_reset_watches function to shutdown watches from old kernel after kexec boot. The old kernel does not unregister all watches in the shutdown path. They are still active, the double registration can not be detected by the new kernel. When the watches fire, unexpected events will arrive and the xenwatch thread will crash (jumps to NULL). An orderly reboot of a hvm guest will destroy the entire guest with all its resources (including the watches) before it is rebuilt from scratch, so the missing unregister is not an issue in that case. With this change the xenstored is instructed to wipe all active watches for the guest. However, a patch for xenstored is required so that it accepts the XS_RESET_WATCHES request from a client (see changeset 23839:42a45baf037d in xen-unstable.hg). Without the patch for xenstored the registration of watches will fail and some features of a PVonHVM guest are not available. The guest is still able to boot, but repeated kexec boots will fail. Signed-off-by:
-
David Vrabel authored
When switching tasks in a Xen PV guest, avoid updating the TLS descriptors if they haven't changed. This improves the speed of context switches by almost 10% as much of the time the descriptors are the same or only one is different. The descriptors written into the GDT by Xen are modified from the values passed in the update_descriptor hypercall so we keep shadow copies of the three TLS descriptors to compare against. lmbench3 test Before After Improvement -------------------------------------------- lat_ctx -s 32 24 7.19 6.52 9% lat_pipe 12.56 11.66 7% Signed-off-by:
David Vrabel <david.vrabel@citrix.com> Signed-off-by:
-
David Vrabel authored
Signed-off-by:
-
David Vrabel authored
When constructing the initial page tables, if the MFN for a usable PFN is missing in the p2m then that frame is initially ballooned out. In this case, zero the PTE (as in decrease_reservation() in drivers/xen/balloon.c). This is obviously safe instead of having an valid PTE with an MFN of INVALID_P2M_ENTRY (~0). Signed-off-by:
-
David Vrabel authored
In xen_set_pte() if batching is unavailable (because the caller is in an interrupt context such as handling a page fault) it would fall back to using native_set_pte() and trapping and emulating the PTE write. On 32-bit guests this requires two traps for each PTE write (one for each dword of the PTE). Instead, do one mmu_update hypercall directly. During construction of the initial page tables, continue to use native_set_pte() because most of the PTEs being set are in writable and unpinned pages (see phys_pmd_init() in arch/x86/mm/init_64.c) and using a hypercall for this is very expensive. This significantly improves page fault performance in 32-bit PV guests. lmbench3 test Before After Improvement ---------------------------------------------- lat_pagefault 3.18 us 2.32 us 27% lat_proc fork 356 us 313.3 us 11% Signed-off-by:
-
Konrad Rzeszutek Wilk authored
Coverity would complain about this - even thought it looks OK. CID 401957 Signed-off-by: -
Konrad Rzeszutek Wilk authored
Coverity points out that we do not free in one case the pr_backup - and sure enough we forgot. Found by Coverity (CID 401970) Signed-off-by: -
Liu, Jinsong authored
If a driver leaves its poll method NULL, the device is assumed to be both readable and writable without blocking. This patch add .poll method to xen mcelog device driver, so that when mcelog use system calls like ppoll or select, it would be blocked when no data available, and avoid spinning at CPU. Reported-by:
Liu, Jinsong <jinsong.liu@intel.com> Signed-off-by:
-
Liu, Jinsong authored
copy_to_user might sleep and print a stack trace if it is executed in an atomic spinlock context. Like this: (XEN) CMCI: send CMCI to DOM0 through virq BUG: sleeping function called from invalid context at /home/konradinux/kernel.h:199 in_atomic(): 1, irqs_disabled(): 0, pid: 4581, name: mcelog Pid: 4581, comm: mcelog Tainted: G O 3.5.0-rc1upstream-00003-g149000b-dirty #1 [<ffffffff8109ad9a>] __might_sleep+0xda/0x100 [<ffffffff81329b0b>] xen_mce_chrdev_read+0xab/0x140 [<ffffffff81148945>] vfs_read+0xc5/0x190 [<ffffffff81148b0c>] sys_read+0x4c/0x90 [<ffffffff815bd039>] system_call_fastpath+0x16 This patch schedule a workqueue for IRQ handler to poll the data, and use mutex instead of spinlock, so copy_to_user sleep in atomic context would not occur. Reported-by:
-
Liu, Jinsong authored
This patch provide Xen physical cpus online/offline sys interface. User can use it for their own purpose, like power saving: by offlining some cpus when light workload it save power greatly. Its basic workflow is, user online/offline cpu via sys interface, then hypercall xen to implement, after done xen inject virq back to dom0, and then dom0 sync cpu status. Signed-off-by:
Jiang, Yunhong <yunhong.jiang@intel.com> Signed-off-by:
-
Liu, Jinsong authored
When Xen hypervisor inject vMCE to guest, use native mce handler to handle it Signed-off-by:
Ke, Liping <liping.ke@intel.com> Signed-off-by:
Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by:
-
Liu, Jinsong authored
there are 3 funcs which need to be _initcalled in a logic sequence: 1. xen_late_init_mcelog 2. mcheck_init_device 3. threshold_init_device xen_late_init_mcelog must register xen_mce_chrdev_device before native mce_chrdev_device registration if running under xen platform; mcheck_init_device should be inited before threshold_init_device to initialize mce_device, otherwise a a NULL ptr dereference will cause panic. so we use following _initcalls 1. device_initcall(xen_late_init_mcelog); 2. device_initcall_sync(mcheck_init_device); 3. late_initcall(threshold_init_device); when running under xen, the initcall order is 1,2,3; on baremetal, we skip 1 and we do only 2 and 3. Acked-and-tested-by:
Borislav Petkov <bp@amd64.org> Suggested-by:
-
Liu, Jinsong authored
When MCA error occurs, it would be handled by Xen hypervisor first, and then the error information would be sent to initial domain for logging. This patch gets error information from Xen hypervisor and convert Xen format error into Linux format mcelog. This logic is basically self-contained, not touching other kernel components. By using tools like mcelog tool users could read specific error information, like what they did under native Linux. To test follow directions outlined in Documentation/acpi/apei/einj.txt Acked-and-tested-by:
Borislav Petkov <borislav.petkov@amd.com> Signed-off-by:
-
- 17 Jun, 2012 3 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfsLinus Torvalds authored
Pull btrfs compile warning fixes from Chris Mason. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: cast devid to unsigned long long for printk %llu Btrfs: init old_generation in get_old_root
-
git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tileLinus Torvalds authored
Pull arch/tile update from Chris Metcalf: "This one-line bug fix unbreaks glibc robust mutexes (among other things no doubt), from code merged in during the 3.5 merge window but which we had been running internally at Tilera for almost a year." * 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: tile: fix bug in get_user() for 4-byte values
-
- 16 Jun, 2012 14 commits
-
-
git://github.com/schandinat/linux-2.6Linus Torvalds authored
Pull fbdev fixes from Florian Tobias Schandinat: - two fixes for s3c-fb by Jingoo Han (including a fix for a potential division by zero) - a couple of randconfig fixes by Arnd Bergmann - a cleanup for bfin_adv7393fb by Emil Goode * tag 'fbdev-fixes-for-3.5-1' of git://github.com/schandinat/linux-2.6: video: s3c-fb: fix possible division by zero in s3c_fb_calc_pixclk video: s3c-fb: clear SHADOWCON register when clearing hardware window registers drivers/tosa: driver needs I2C and SPI to compile drivers/savagefb: use mdelay instead of udelay video/console: automatically select a font video/ili9320: do not mark exported functions __devexit drivers/video: use correct __devexit_p annotation video: bfin_adv7393fb: Convert to kstrtouint_from_user
-
Chris Metcalf authored
The definition of 32-bit values in the 64-bit tilegx architecture is that they should be sign-extended regardless of whether they are considered signed or unsigned by the compiler. Accordingly, we need to use an "ld4s" rather than "ld4u" to load and sign-extend for get_user(). This fixes glibc bug 14238 (see http://sourceware.org/bugzilla), introduced during the 3.5 merge window. Signed-off-by:
Chris Metcalf <cmetcalf@tilera.com>
-
Hugh Dickins authored
Minchan Kim reports that when a system has many swap areas, and tmpfs swaps out to the ninth or more, shmem_getpage_gfp()'s attempts to read back the page cannot locate it, and the read fails with -ENOMEM. Whoops. Yes, I blindly followed read_swap_header()'s pte_to_swp_entry( swp_entry_to_pte()) technique for determining maximum usable swap offset, without stopping to realize that that actually depends upon the pte swap encoding shifting swap offset to the higher bits and truncating it there. Whereas our radix_tree swap encoding leaves offset in the lower bits: it's swap "type" (that is, index of swap area) that was truncated. Fix it by reducing the SWP_TYPE_SHIFT() in swapops.h, and removing the broken radix_to_swp_entry(swp_to_radix_entry()) from read_swap_header(). This does not reduce the usable size of a swap area any further, it leaves it as claimed when making the original commit: no change from 3.0 on x86_64, nor on i386 without PAE; but 3.0's 512GB is reduced to 128GB per swapfile on i386 with PAE. It's not a change I would have risked five years ago, but with x86_64 supported for ten years, I believe it's appropriate now. Hmm, and what if some architecture implements its swap pte with offset encoded below type? That would equally break the maximum usable swap offset check. Happily, they all follow the same tradition of encoding offset above type, but I'll prepare a check on that for next. Reported-and-Reviewed-and-Tested-by:
Minchan Kim <minchan@kernel.org> Signed-off-by:
Hugh Dickins <hughd@google.com> Cc: stable@vger.kernel.org [3.1, 3.2, 3.3, 3.4] Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "This is a couple of minor fixes, one for a preempt warning in the mpt2sas driver and one is a config failure with the new sd async domain." * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: [SCSI] Fix sd_probe_domain config problem [SCSI] mpt2sas: Fix unsafe using smp_processor_id() in preemptible
-
git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds authored
Pull NFS client bugfixes from Trond Myklebust: "Highlights include: - Fix a couple of mount regressions due to the recent cleanups. - Fix an Oops in the open recovery code - Fix an rpc_pipefs upcall hang that results from some of the net namespace work from 3.4.x (stable kernel candidate). - Fix a couple of write and o_direct regressions that were found at last weeks Bakeathon testing event in Ann Arbor." * tag 'nfs-for-3.5-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFS: add an endian notation for sparse NFSv4.1: integer overflow in decode_cb_sequence_args() rpc_pipefs: allow rpc_purge_list to take a NULL waitq pointer NFSv4 do not send an empty SETATTR compound NFSv2: EOF incorrectly set on short read NFS: Use the NFS_DEFAULT_VERSION for v2 and v3 mounts NFS: fix directio refcount bug on commit NFSv4: Fix unnecessary delegation returns in nfs4_do_open NFSv4.1: Convert another trivial printk into a dprintk NFS4: Fix open bug when pnfs module blacklisted NFS: Remove incorrect BUG_ON in nfs_found_client NFS: Map minor mismatch error to protocol not support error. NFS: Fix a commit bug NFS4: Set parsed mount data version to 4 NFSv4.1: Ensure we clear session state flags after a session creation NFSv4.1: Convert a trivial printk into a dprintk NFSv4: Fix up decode_attr_mdsthreshold NFSv4: Fix an Oops in the open recovery code NFSv4.1: Fix a request leak on the back channel -
git://git.linaro.org/people/mszyprowski/linux-dma-mappingLinus Torvalds authored
Pull DMA-mapping fixes from Marek Szyprowski: "A set of minor fixes for dma-mapping code (ARM and x86) required for Contiguous Memory Allocator (CMA) patches merged in v3.5-rc1." * 'fixes-for-linus' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping: x86: dma-mapping: fix broken allocation when dma_mask has been provided ARM: dma-mapping: fix debug messages in dmabounce code ARM: mm: fix type of the arm_dma_limit global variable ARM: dma-mapping: Add missing static storage class specifier
-
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpcLinus Torvalds authored
Pull PowerPC fix from Paul Mackerras: "Just one commit, and a one-liner at that, but an important one; without it hard_irq_disable() does nothing on powerpc." * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: Make hard_irq_disable() actually hard-disable interrupts
-
git://linux-nfs.org/~bfields/linuxLinus Torvalds authored
Pull two nfsd bugfixes from J. Bruce Fields. * 'for-3.5' of git://linux-nfs.org/~bfields/linux: nfsd4: BUG_ON(!is_spin_locked()) no good on UP kernels NFS: hard-code init_net for NFS callback transports
-
Linus Torvalds authored
Merge tag 'stable/for-linus-3.5-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull five Xen bug-fixes from Konrad Rzeszutek Wilk: - When booting as PVHVM we would try to use PV console - but would not validate the parameters causing us to crash during restore b/c we re-use the wrong event channel. - When booting on machines with SR-IOV PCI bridge we didn't check for the bridge and tried to use it. - Under AMD machines would advertise the APERFMPERF resulting in needless amount of MSRs from the guest. - A global value (xen_released_pages) was not subtracted at bootup when pages were added back in. This resulted in the balloon worker having the wrong account of how many pages were truly released. - Fix dead-lock when xen-blkfront is run in the same domain as xen-blkback. * tag 'stable/for-linus-3.5-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen: mark local pages as FOREIGN in the m2p_override xen/setup: filter APERFMPERF cpuid feature out xen/balloon: Subtract from xen_released_pages the count that is populated. xen/pci: Check for PCI bridge before using it. xen/events: Add WARN_ON when quick lookup found invalid type. xen/hvc: Check HVM_PARAM_CONSOLE_[EVTCHN|PFN] for correctness. xen/hvc: Fix error cases around HVM_PARAM_CONSOLE_PFN xen/hvc: Collapse error logic.
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes from Greg Kroah-Hartman: "Here are a bunch of tiny fixes for the USB core and drivers for 3.5-rc3 A bunch of gadget fixes, and new device ids, as well as some fixes for a number of different regressions that have been reported recently. We also fixed some PCI host controllers to resolve a long-standing bug with a whole class of host controllers that have been plaguing people for a number of kernel releases, preventing their systems from suspending properly. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'usb-3.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (41 commits) USB: fix gathering of interface associations usb: ehci-sh: fix illegal phy_init() running when platform_data is NULL usb: cdc-acm: fix devices not unthrottled on open Fix OMAP EHCI suspend/resume failure (i693) USB: ohci-hub: Mark ohci_finish_controller_resume() as __maybe_unused usb: use usb_serial_put in usb_serial_probe errors USB: EHCI: Fix build warning in xilinx ehci driver USB: fix PS3 EHCI systems xHCI: Increase the timeout for controller save/restore state operation xhci: Don't free endpoints in xhci_mem_cleanup() xhci: Fix invalid loop check in xhci_free_tt_info() xhci: Fix error path return value. USB: Checking the wrong variable in usb_disable_lpm() usb-storage: Add 090c:1000 to unusal-devs USB: serial-generic: use a single set of device IDs USB: serial: Enforce USB driver and USB serial driver match USB: add NO_D3_DURING_SLEEP flag and revert 151b6128 USB: option: add more YUGA device ids USB: mos7840: Fix compilation of usb serial driver USB: option: fix memory leak ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/ideLinus Torvalds authored
Pull IDE fixes from David S. Miller: 1) Two fixes to icside, one for a build failure and another for a warning. From Christian Dietrich. 2) Fix a bit operation that did erroneous masking, from Julia Lawall. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide: drivers/ide/ide-cs.c: adjust suspicious bit operation ide: icside.c: fix printk format string compile warning ide: icside.c: Fix compile with CONFIG_BLK_DEV_IDEDMA_ICS=n
-
Chris Mason authored
Avoid warning in 32 bit machines Signed-off-by:Chris Mason <chris.mason@fusionio.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds authored
Pull sparc update from David S. Miller: "This just removes some sparc headers that were never, ever, used." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc: remove two unused headers
-
Chris Mason authored
gcc was giving an uninit variable warning here. Strictly speaking we don't need to init it, but this will make things much less error prone. Signed-off-by:
-
- 15 Jun, 2012 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Ingo Molnar. * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/smp: Fix topology checks on AMD MCM CPUs x86/mm: Fix some kernel-doc warnings x86, um: Correct syscall table type attributes breaking gcc 4.8
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Ingo Molnar. * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: watchdog: Quiet down the boot messages perf/x86: Fix broken LBR fixup code tracing: Have tracing_off() actually turn tracing off
-
