- 12 Mar, 2020 39 commits
-
-
Lad Prabhakar authored
This patch adds mode table entry for capturing cropped 640x480 resolution Signed-off-by:
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Acked-by:
Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Lad Prabhakar authored
IMX219 sensor is capable for RAW8/RAW10 modes. This commit adds support for RAW8 bayer format. Signed-off-by:
-
Lad Prabhakar authored
When supporting Rpi Camera v2 Module on the RZ/G2E, found the driver had some issues with rcar mipi-csi driver. The sensor never entered into LP-11 state. The powerup sequence in the datasheet[1] shows the sensor entering into LP-11 in streaming mode, so to fix this issue transitions are performed from "streaming -> standby" in the probe() after power up. With this commit the sensor is able to enter LP-11 mode during power up, as expected by some CSI-2 controllers. [1] https://publiclab.org/system/images/photos/000/023/294/original/ RASPBERRY_PI_CAMERA_V2_DATASHEET_IMX219PQH5_7.0.0_Datasheet_XXX.PDF Signed-off-by:
-
Lukas Bulwahn authored
Commit 7cbeb2e1 ("media: smiapp: Move definitions under driver directory") moved the definitions in include/media/i2c/smiapp.h into other files and removed include/media/i2c/smiapp.h. Since then, ./scripts/get_maintainer.pl --self-test complains: warning: no file matches F: include/media/i2c/smiapp.h Remove MAINTAINER file entry to this removed file and while at it, update Sakari's email address in this section. Signed-off-by:
Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by:
-
Sakari Ailus authored
Add entry for my @iki.fi e-mail address to the mailmap. Signed-off-by:
-
Bingbu Cao authored
Currently, imgu is working on 450MHz for all cases, however in some cases (input frame less than 2048x1152), the imgu did not need work in high frequency. This patch make imgu work on 200MHz if the imgu input frame is less than 2048x1152 to save power. Signed-off-by:
Bingbu Cao <bingbu.cao@intel.com> Reviewed-by:
Tomasz Figa <tfiga@chromium.org> Signed-off-by:
-
Ian Kumlien authored
While upgrading from 5.5.2 -> 5.5.6 I was surprised by: ld: drivers/media/i2c/tvp5150.o: in function `tvp5150_probe': tvp5150.c:(.text+0x11ac): undefined reference to `__devm_regmap_init_i2c' make: *** [Makefile:1078: vmlinux] Error 1 The fix was quick enough, make VIDEO_TVP5150 select REGMAP_I2C And a quick grep showed that it was needed by more targets. Signed-off-by:
Ian Kumlien <ian.kumlien@gmail.com> Signed-off-by:
-
Marco Felsch authored
The debug output for tvp5150_selmux() isn't really intuitive. Register values are printed decimal formatted and the input/output driver states are printed as enum. Even more the "normal" output enum mapps to zero so a active output will printing output=0 and a inactive output=1. Change this by brinting the register values hex formatted and the states as more readable string. Signed-off-by:
Marco Felsch <m.felsch@pengutronix.de> Reviewed-by:
Jacopo Mondi <jacopo@jmondi.org> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
-
Marco Felsch authored
The tvp5150 accepts NTSC(M,J,4.43), PAL (B,D,G,H,I,M,N) and SECAM video data and is able to auto-detect the input signal. The auto-detection does not work if the connector does not receive an input signal and the tvp5150 might not be configured correctly. This misconfiguration leads into wrong decoded video streams if the tvp5150 gets powered on before the video signal is present. Limit the supported sdtv standards according to the actual selected connector to avoid a misconfiguration. Signed-off-by:
-
Marco Felsch authored
Document the optional binding to limit the possible sdtv standards on the input connectors. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Marco Felsch authored
Use underlines to highlight optional and required properties. This is quite common for all bindings. Align descriptions and start sentence with uppercase letter. Also reword the usage of the required endpoint properties for the output port in case BT.656 should be used. Signed-off-by:
-
Marco Felsch authored
Bring the device into a working state upon a open/close call. Currently this involves only the interrupt enable/disable process but can be extended in the future. Signed-off-by:
-
Marco Felsch authored
Currently the driver notifies internal subdevs if the signal is locked or not. This information is also useful for userpace applications e.g. to switch to another input device upon a signal lost event. This commit adds the support for the userspace to subscribe to the V4L2_EVENT_SOURCE_CHANGE and V4L2_EVENT_CTRL events. Signed-off-by:
-
Marco Felsch authored
As documented in [1] the runtime-pm ops are used to set the device into a fully 'workable' state. Therefore it can be used to enable or disable the irqs. [1] https://www.kernel.org/doc/html/latest/power/runtime_pm.htmlSigned-off-by:
-
Michael Tretter authored
There are several debug prints in the tvp5150_parse_dt() function, which do not print the prefix, because the v4l2_subdev is not initialized, yet. Initialize the v4l2_subdev before parsing the device tree to fix the debug messages. Signed-off-by:
Michael Tretter <m.tretter@pengutronix.de> Signed-off-by:
-
Marco Felsch authored
Since commit 10d5509c ("[media] v4l2: remove g/s_crop from video ops") the 'which' field for set/get_selection must be FORMAT_ACTIVE. There is no way to try different selections. The patch adds a helper function to select the correct selection memory space (sub-device file handle or driver state) which will be set/returned. The selection rectangle is updated if the format is FORMAT_ACTIVE and the rectangle position and/or size differs from the current set rectangle. Signed-off-by:
-
Marco Felsch authored
Currently a local copy of sel->r is made and adapted to the hardware constraints. After the adaption the value is applied to the hardware but the driver forgot to reflect the adapted value to the user space. Drop the local copy and work directly on the requested rectangle instead to fix this. Signed-off-by:
-
Marco Felsch authored
The TVP5150/1 decoders support different video input sources to their AIP1A/B pins. Possible configurations are as follows: - Analog Composite signal connected to AIP1A. - Analog Composite signal connected to AIP1B. - Analog S-Video Y (luminance) and C (chrominance) signals connected to AIP1A and AIP1B respectively. This patch extends the device tree bindings documentation to describe how the input connectors for these devices should be defined in a DT. Signed-off-by: -
Marco Felsch authored
This patch adds the of_graph support to describe the tvp input connections. Physical the TVP5150 has three ports: AIP1A, AIP1B and YOUT. As result of discussion [1],[2] the device-tree maps these ports 1:1. Look at the Documentation for more information. Since the TVP5150 is a converter/bridge the device-tree must contain at least 1-input and 1-output port. The mc-connectors and mc-links are only created if the device-tree contains the corresponding connector nodes. If more than one connector is available the media_entity_operations.link_setup() callback ensures that only one connector is active. [1] https://www.spinics.net/lists/linux-media/msg138545.html [2] https://www.spinics.net/lists/linux-media/msg138546.htmlSigned-off-by:
-
Javier Martinez Canillas authored
Commit f7b4b54e ("[media] tvp5150: add HW input connectors support") added input signals support for the tvp5150, but the approach was found to be incorrect so the corresponding DT binding commit 82c2ffeb ("[media] tvp5150: document input connectors DT bindings") was reverted. This left the driver with an undocumented (and wrong) DT parsing logic, so lets get rid of this code as well until the input connectors support is implemented properly. It's a partial revert due other patches added on top of mentioned commit not allowing the commit to be reverted cleanly anymore. But all the code related to the DT parsing logic and input entities creation are removed. Suggested-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Javier Martinez Canillas <javierm@redhat.com> Acked-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Acked-by:
-
Marco Felsch authored
The patch adds the initial connector parsing code, so we can move from a driver specific parsing code to a generic one. Currently only the generic fields and the analog-connector specific fields are parsed. Parsing the other connector specific fields can be added by a simple callbacks. Signed-off-by:
-
Marco Felsch authored
Currently every driver needs to parse the connector endpoints by it self. This is the initial work to make this generic. A generic connector has common members and connector specific members. The common members are: - type - label (optional) - links - nr_of_links The specific members are stored within a union, since only one of them can be available at the time. Since this is the initial support the patch adds only the analog-connector specific ones. Signed-off-by:
-
Marco Felsch authored
A link is between two endpoints not between two ports to be more precise. Add the local_id/remote_id field which stores the endpoint reg/port property to the link. Now the link holds all necessary information about a link. Signed-off-by:
-
Marco Felsch authored
This helper was introduced before those helpers where awailable. Convert it to cleanup the code and improbe readability. Signed-off-by:
-
Marco Felsch authored
Currently the driver differentiate the port number property handling for ACPI and DT. This is wrong as because ACPI should use the "reg" val too [1]. [1] https://patchwork.kernel.org/patch/11421985/ Fixes: ca50c197 ("[media] v4l: fwnode: Support generic fwnode for parsing standardised properties") Signed-off-by:
-
Marco Felsch authored
Since we expose the definition to the dt-bindings we need to keep those definitions in sync. To address this the patch adds a simple cross reference to the dt-bindings. Signed-off-by:
-
Marco Felsch authored
Add defines which can be included to easily describe the supported standard tv norms 'sdtv-standards' within the device tree. Signed-off-by:
-
Marco Felsch authored
Some connectors no matter if in- or output supports only a limited range of sdtv standards. It doesn't matter if the hardware behind that connector supports more than the listed formats since the users are restriced by a label e.g. to plug only a camera into this connector which uses the PAL format. This patch adds the capability to describe such limitation within the firmware. There are no format restrictions if the property isn't present, so it's completely backward compatible. Signed-off-by:
-
Changming Liu authored
When calling ccdc_data_size_max_bit() to validate data_sz in vpfe_ccdc_validate_param(), it's treated as an enumeration ranging from 0 to 7 while essentially it's an 32 bit unsigned integer directly from user space. This can make the return value of ccdc_data_size_max_bit() underflow and bypass the following check. To fix this, an additional check is added to the following if clause to keep this enumaration variable in range. And if its value is not legal, return -EINVAL properly. Signed-off-by:
Changming Liu <charley.ashbringer@gmail.com> Signed-off-by:
-
Benoit Parrot authored
After the switch to use v4l2_async_notifier_add_subdev() and v4l2_async_notifier_cleanup(), unloading the ti_cal module would cause a kernel oops. This was root cause to the fact that v4l2_async_notifier_cleanup() tries to kfree the asd pointer passed into v4l2_async_notifier_add_subdev(). In our case the asd reference was from a statically allocated struct. So in effect v4l2_async_notifier_cleanup() was trying to free a pointer that was not kalloc. So here we switch to using a kzalloc struct instead of a static one. To achieve this we re-order some of the calls to prevent asd allocation from leaking. Fixes: d079f94c ("media: platform: Switch to v4l2_async_notifier_add_subdev") Cc: stable@vger.kernel.org Signed-off-by:
Benoit Parrot <bparrot@ti.com> Reviewed-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by:
-
Hsin-Yi Wang authored
Previously, vpu->recv_buf and send_buf are forced cast from void __iomem *tcm. vpu->recv_buf->share_buf is passed to vpu_ipi_desc.handler(). It's not able to do unaligned access. Otherwise kernel would crash due to unable to handle kernel paging request. struct vpu_run { u32 signaled; char fw_ver[VPU_FW_VER_LEN]; unsigned int dec_capability; unsigned int enc_capability; wait_queue_head_t wq; }; fw_ver starts at 4 byte boundary. If system enables CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS, strscpy() will do read_word_at_a_time(), which tries to read 8-byte: *(unsigned long *)addr vpu_init_ipi_handler() calls strscpy(), which would lead to crash. vpu_init_ipi_handler() and several other handlers (eg. vpu_dec_ipi_handler) only do read access to this data, so they can be const, and we can use memcpy_fromio() to copy the buf to another non iomem buffer then pass to handler. Fixes: 85709cbf ("media: replace strncpy() by strscpy()") Signed-off-by:Hsin-Yi Wang <hsinyi@chromium.org> Signed-off-by:
-
Jeffrey Kardatzke authored
Add encoder control for enabling/disabling frame rate control via V4L2_CID_MPEG_VIDEO_FRAME_RC_ENABLE. It is enabled by default. Signed-off-by:
Jeffrey Kardatzke <jkardatzke@google.com> Signed-off-by:
Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by:
-
Stanimir Varbanov authored
This fixes the following smatch warning in the error path: drivers/media/platform/qcom/venus/vdec.c:968 vdec_start_streaming() warn: inconsistent returns 'mutex:&inst->lock'. Locked on: line 952 Unlocked on: line 963 line 968 by goto mutex unlock. Signed-off-by: -
Colin Ian King authored
The variable gate is being initialized and also checked and re-assigned with values that are never read as it is being re-assigned later in a for-loop with a new value. The assignments are redundant and can be removed. Addresses Coverity ("Unused value") Signed-off-by:Colin Ian King <colin.king@canonical.com> Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
-
Colin Ian King authored
The shifting of buf[3] by 24 bits to the left will be promoted to a 32 bit signed int and then sign-extended to an unsigned long. In the unlikely event that the the top bit of buf[3] is set then all then all the upper bits end up as also being set because of the sign-extension and this affect the ev->post_bit_error sum. Fix this by using the temporary u32 variable bit_error to avoid the sign-extension promotion. This also removes the need to do the computation twice. Addresses-Coverity: ("Unintended sign extension") Fixes: 267897a4 ("[media] tda10071: implement DVBv5 statistics") Signed-off-by: -
Brad Love authored
This is required to support the Terratec S2 USB Box Revision 4, which reused usb vid:pid, but has a different demodulator (m88ds3103b) at i2c address 0x6a. [fixed checkpatch issues] Signed-off-by:
Michael Bunk <micha@freedict.org> Signed-off-by:
Brad Love <brad@nextdimension.cc> Signed-off-by:
-
Brad Love authored
Hauppauge 461e rev2 is a DVB-S/S2 usb device containing: - m88ds3103b demod - ts2022 tuner - A8293 SEC Device is the same as Hauppauge 461e, except it contains updated m88ds3103b demod. Signed-off-by:
-
Brad Love authored
The ds3103b demodulator identifies as an m88rs600, but requires different clock settings and firmware, along with differences in register settings. Changes were reverse engineered using an instrumented downstream GPLv2 driver to compare i2c traffic and clocking. The mclk functions are from the downstream GPLv2 driver. Signed-off-by:
-
Sean Young authored
There are many protocols that encode more than 32 bit. We want 64 bit support so that BPF IR decoders can decode more than 32 bit. None of the existing kernel IR decoders/encoders support 64 bit, for now. The MSC_SCAN event can only contain 32 bit scancodes, so we only generate MSC_SCAN events if the scancode fits into 32 bits. The full 64 bit scancode can be read from the lirc chardev. Signed-off-by:
-
- 05 Mar, 2020 1 commit
-
-
Maxime Jourdan authored
This adds VP9 decoding for the Amlogic GXL, G12A & SM1 SoCs, using the commong "HEVC" HW decoder. For G12A & SM1, it uses the IOMMU support from the firmware. For 10bit decoding, the firmware can only decode in the proprietary Amlogic Framebuffer Compression format, but can output in 8bit NV12 buffer while writing the decoded frame. Signed-off-by:
Maxime Jourdan <mjourdan@baylibre.com> Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Tested-by:
Kevin Hilman <khilman@baylibre.com> Signed-off-by:
-
