Commits · 25cc72a33835ed8a6f53180a822cadab855852ac · nexedi / linux

01 Sep, 2017 1 commit

mlxsw: spectrum: Forbid linking to devices that have uppers · 25cc72a3

Ido Schimmel authored Sep 01, 2017

The mlxsw driver relies on NETDEV_CHANGEUPPER events to configure the
device in case a port is enslaved to a master netdev such as bridge or
bond.

Since the driver ignores events unrelated to its ports and their
uppers, it's possible to engineer situations in which the device's data
path differs from the kernel's.

One example to such a situation is when a port is enslaved to a bond
that is already enslaved to a bridge. When the bond was enslaved the
driver ignored the event - as the bond wasn't one of its uppers - and
therefore a bridge port instance isn't created in the device.

Until such configurations are supported forbid them by checking that the
upper device doesn't have uppers of its own.

Fixes: 0d65fc13 ("mlxsw: spectrum: Implement LAG port join/leave")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: Nogah Frankel <nogahf@mellanox.com>
Tested-by: Nogah Frankel <nogahf@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

25cc72a3

31 Aug, 2017 2 commits

wl1251: add a missing spin_lock_init() · f581a0dd

Cong Wang authored Aug 31, 2017

wl1251: add a missing spin_lock_init()

This fixes the following kernel warning:

 [ 5668.771453] BUG: spinlock bad magic on CPU#0, kworker/u2:3/9745
 [ 5668.771850]  lock: 0xce63ef20, .magic: 00000000, .owner: <none>/-1,
 .owner_cpu: 0
 [ 5668.772277] CPU: 0 PID: 9745 Comm: kworker/u2:3 Tainted: G        W
 4.12.0-03002-gec979a4-dirty #40
 [ 5668.772796] Hardware name: Nokia RX-51 board
 [ 5668.773071] Workqueue: phy1 wl1251_irq_work
 [ 5668.773345] [<c010c9e4>] (unwind_backtrace) from [<c010a274>]
 (show_stack+0x10/0x14)
 [ 5668.773803] [<c010a274>] (show_stack) from [<c01545a4>]
 (do_raw_spin_lock+0x6c/0xa0)
 [ 5668.774230] [<c01545a4>] (do_raw_spin_lock) from [<c06ca578>]
 (_raw_spin_lock_irqsave+0x10/0x18)
 [ 5668.774658] [<c06ca578>] (_raw_spin_lock_irqsave) from [<c048c010>]
 (wl1251_op_tx+0x38/0x5c)
 [ 5668.775115] [<c048c010>] (wl1251_op_tx) from [<c06a12e8>]
 (ieee80211_tx_frags+0x188/0x1c0)
 [ 5668.775543] [<c06a12e8>] (ieee80211_tx_frags) from [<c06a138c>]
 (__ieee80211_tx+0x6c/0x130)
 [ 5668.775970] [<c06a138c>] (__ieee80211_tx) from [<c06a3dbc>]
 (ieee80211_tx+0xdc/0x104)
 [ 5668.776367] [<c06a3dbc>] (ieee80211_tx) from [<c06a4af0>]
 (__ieee80211_subif_start_xmit+0x454/0x8c8)
 [ 5668.776824] [<c06a4af0>] (__ieee80211_subif_start_xmit) from
 [<c06a4f94>] (ieee80211_subif_start_xmit+0x30/0x2fc)
 [ 5668.777343] [<c06a4f94>] (ieee80211_subif_start_xmit) from
 [<c0578848>] (dev_hard_start_xmit+0x80/0x118)
...

    by adding the missing spin_lock_init().
Reported-by: Pavel Machek <pavel@ucw.cz>
Cc: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Cc: stable@kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>

f581a0dd

Revert "net: phy: Correctly process PHY_HALTED in phy_stop_machine()" · ebc8254a

Florian Fainelli authored Aug 30, 2017

This reverts commit 7ad813f2 ("net: phy:
Correctly process PHY_HALTED in phy_stop_machine()") because it is
creating the possibility for a NULL pointer dereference.

David Daney provide the following call trace and diagram of events:

When ndo_stop() is called we call:

 phy_disconnect()
    +---> phy_stop_interrupts() implies: phydev->irq = PHY_POLL;
    +---> phy_stop_machine()
    |      +---> phy_state_machine()
    |              +----> queue_delayed_work(): Work queued.
    +--->phy_detach() implies: phydev->attached_dev = NULL;

Now at a later time the queued work does:

 phy_state_machine()
    +---->netif_carrier_off(phydev->attached_dev): Oh no! It is NULL:

 CPU 12 Unable to handle kernel paging request at virtual address
0000000000000048, epc == ffffffff80de37ec, ra == ffffffff80c7c
Oops[#1]:
CPU: 12 PID: 1502 Comm: kworker/12:1 Not tainted 4.9.43-Cavium-Octeon+ #1
Workqueue: events_power_efficient phy_state_machine
task: 80000004021ed100 task.stack: 8000000409d70000
$ 0   : 0000000000000000 ffffffff84720060 0000000000000048 0000000000000004
$ 4   : 0000000000000000 0000000000000001 0000000000000004 0000000000000000
$ 8   : 0000000000000000 0000000000000000 00000000ffff98f3 0000000000000000
$12   : 8000000409d73fe0 0000000000009c00 ffffffff846547c8 000000000000af3b
$16   : 80000004096bab68 80000004096babd0 0000000000000000 80000004096ba800
$20   : 0000000000000000 0000000000000000 ffffffff81090000 0000000000000008
$24   : 0000000000000061 ffffffff808637b0
$28   : 8000000409d70000 8000000409d73cf0 80000000271bd300 ffffffff80c7804c
Hi    : 000000000000002a
Lo    : 000000000000003f
epc   : ffffffff80de37ec netif_carrier_off+0xc/0x58
ra    : ffffffff80c7804c phy_state_machine+0x48c/0x4f8
Status: 14009ce3        KX SX UX KERNEL EXL IE
Cause : 00800008 (ExcCode 02)
BadVA : 0000000000000048
PrId  : 000d9501 (Cavium Octeon III)
Modules linked in:
Process kworker/12:1 (pid: 1502, threadinfo=8000000409d70000,
task=80000004021ed100, tls=0000000000000000)
Stack : 8000000409a54000 80000004096bab68 80000000271bd300 80000000271c1e00
        0000000000000000 ffffffff808a1708 8000000409a54000 80000000271bd300
        80000000271bd320 8000000409a54030 ffffffff80ff0f00 0000000000000001
        ffffffff81090000 ffffffff808a1ac0 8000000402182080 ffffffff84650000
        8000000402182080 ffffffff84650000 ffffffff80ff0000 8000000409a54000
        ffffffff808a1970 0000000000000000 80000004099e8000 8000000402099240
        0000000000000000 ffffffff808a8598 0000000000000000 8000000408eeeb00
        8000000409a54000 00000000810a1d00 0000000000000000 8000000409d73de8
        8000000409d73de8 0000000000000088 000000000c009c00 8000000409d73e08
        8000000409d73e08 8000000402182080 ffffffff808a84d0 8000000402182080
        ...
Call Trace:
[<ffffffff80de37ec>] netif_carrier_off+0xc/0x58
[<ffffffff80c7804c>] phy_state_machine+0x48c/0x4f8
[<ffffffff808a1708>] process_one_work+0x158/0x368
[<ffffffff808a1ac0>] worker_thread+0x150/0x4c0
[<ffffffff808a8598>] kthread+0xc8/0xe0
[<ffffffff808617f0>] ret_from_kernel_thread+0x14/0x1c

The original motivation for this change originated from Marc Gonzales
indicating that his network driver did not have its adjust_link callback
executing with phydev->link = 0 while he was expecting it.

PHYLIB has never made any such guarantees ever because phy_stop() merely just
tells the workqueue to move into PHY_HALTED state which will happen
asynchronously.
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reported-by: David Daney <ddaney.cavm@gmail.com>
Fixes: 7ad813f2 ("net: phy: Correctly process PHY_HALTED in phy_stop_machine()")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ebc8254a

30 Aug, 2017 25 commits

Merge tag 'mlx5-fixes-2017-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux · a1bc54a2

David S. Miller authored Aug 30, 2017

Saeed Mahameed says:

====================
Mellanox, mlx5 fixes 2017-08-30

This series contains some misc fixes to the mlx5 driver.

Please pull and let me know if there's any problem.

For -stable:

Kernels >= 4.12
	net/mlx5e: Fix CQ moderation mode not set properly
	net/mlx5e: Don't override user RSS upon set channels

Kernels >= 4.11
	net/mlx5e: Properly resolve TC offloaded ipv6 vxlan tunnel source address

Kernels >= 4.10
	net/mlx5e: Fix DCB_CAP_ATTR_DCBX capability for DCBNL getcap
	net/mlx5e: Check for qos capability in dcbnl_initialize

Kernels >= 4.9
	net/mlx5e: Fix dangling page pointer on DMA mapping error

Kernels >= 4.8
	net/mlx5e: Fix inline header size for small packets
	net/mlx5: E-Switch, Unload the representors in the correct order
    	net/mlx5: Fix arm SRQ command for ISSI version 0
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

a1bc54a2

net: dsa: bcm_sf2: Fix number of CFP entries for BCM7278 · df191632

Florian Fainelli authored Aug 30, 2017

BCM7278 has only 128 entries while BCM7445 has the full 256 entries set,
fix that.

Fixes: 7318166c ("net: dsa: bcm_sf2: Add support for ethtool::rxnfc")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

df191632

kcm: do not attach PF_KCM sockets to avoid deadlock · 351050ec

Eric Dumazet authored Aug 30, 2017

syzkaller had no problem to trigger a deadlock, attaching a KCM socket
to another one (or itself). (original syzkaller report was a very
confusing lockdep splat during a sendmsg())

It seems KCM claims to only support TCP, but no enforcement is done,
so we might need to add additional checks.

Fixes: ab7ac4eb ("kcm: Kernel Connection Multiplexor module")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Tom Herbert <tom@quantonium.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

351050ec

Merge branch 'net-sched-init-failure-fixes' · f5c3dd4b

David S. Miller authored Aug 30, 2017

Nikolay Aleksandrov says:

====================
net/sched: init failure fixes

I went over all qdiscs' init, destroy and reset callbacks and found the
issues fixed in each patch. Mostly they are null pointer dereferences due
to uninitialized timer (qdisc watchdog) or double frees due to ->destroy
cleaning up a second time. There's more information in each patch.
I've tested these by either sending wrong attributes from user-spaces, no
attributes or by simulating memory alloc failure where applicable. Also
tried all of the qdiscs as a default qdisc.

Most of these bugs were present before commit 87b60cfa, I've tried to
include proper fixes tags in each patch.

I haven't included individual patch acks in the set, I'd appreciate it if
you take another look and resend them.
====================
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

f5c3dd4b

sch_tbf: fix two null pointer dereferences on init failure · c2d6511e

Nikolay Aleksandrov authored Aug 30, 2017

sch_tbf calls qdisc_watchdog_cancel() in both its ->reset and ->destroy
callbacks but it may fail before the timer is initialized due to missing
options (either not supplied by user-space or set as a default qdisc),
also q->qdisc is used by ->reset and ->destroy so we need it initialized.

Reproduce:
$ sysctl net.core.default_qdisc=tbf
$ ip l set ethX up

Crash log:
[  959.160172] BUG: unable to handle kernel NULL pointer dereference at 0000000000000018
[  959.160323] IP: qdisc_reset+0xa/0x5c
[  959.160400] PGD 59cdb067
[  959.160401] P4D 59cdb067
[  959.160466] PUD 59ccb067
[  959.160532] PMD 0
[  959.160597]
[  959.160706] Oops: 0000 [#1] SMP
[  959.160778] Modules linked in: sch_tbf sch_sfb sch_prio sch_netem
[  959.160891] CPU: 2 PID: 1562 Comm: ip Not tainted 4.13.0-rc6+ #62
[  959.160998] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014
[  959.161157] task: ffff880059c9a700 task.stack: ffff8800376d0000
[  959.161263] RIP: 0010:qdisc_reset+0xa/0x5c
[  959.161347] RSP: 0018:ffff8800376d3610 EFLAGS: 00010286
[  959.161531] RAX: ffffffffa001b1dd RBX: ffff8800373a2800 RCX: 0000000000000000
[  959.161733] RDX: ffffffff8215f160 RSI: ffffffff8215f160 RDI: 0000000000000000
[  959.161939] RBP: ffff8800376d3618 R08: 00000000014080c0 R09: 00000000ffffffff
[  959.162141] R10: ffff8800376d3578 R11: 0000000000000020 R12: ffffffffa001d2c0
[  959.162343] R13: ffff880037538000 R14: 00000000ffffffff R15: 0000000000000001
[  959.162546] FS:  00007fcc5126b740(0000) GS:ffff88005d900000(0000) knlGS:0000000000000000
[  959.162844] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  959.163030] CR2: 0000000000000018 CR3: 000000005abc4000 CR4: 00000000000406e0
[  959.163233] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  959.163436] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  959.163638] Call Trace:
[  959.163788]  tbf_reset+0x19/0x64 [sch_tbf]
[  959.163957]  qdisc_destroy+0x8b/0xe5
[  959.164119]  qdisc_create_dflt+0x86/0x94
[  959.164284]  ? dev_activate+0x129/0x129
[  959.164449]  attach_one_default_qdisc+0x36/0x63
[  959.164623]  netdev_for_each_tx_queue+0x3d/0x48
[  959.164795]  dev_activate+0x4b/0x129
[  959.164957]  __dev_open+0xe7/0x104
[  959.165118]  __dev_change_flags+0xc6/0x15c
[  959.165287]  dev_change_flags+0x25/0x59
[  959.165451]  do_setlink+0x30c/0xb3f
[  959.165613]  ? check_chain_key+0xb0/0xfd
[  959.165782]  rtnl_newlink+0x3a4/0x729
[  959.165947]  ? rtnl_newlink+0x117/0x729
[  959.166121]  ? ns_capable_common+0xd/0xb1
[  959.166288]  ? ns_capable+0x13/0x15
[  959.166450]  rtnetlink_rcv_msg+0x188/0x197
[  959.166617]  ? rcu_read_unlock+0x3e/0x5f
[  959.166783]  ? rtnl_newlink+0x729/0x729
[  959.166948]  netlink_rcv_skb+0x6c/0xce
[  959.167113]  rtnetlink_rcv+0x23/0x2a
[  959.167273]  netlink_unicast+0x103/0x181
[  959.167439]  netlink_sendmsg+0x326/0x337
[  959.167607]  sock_sendmsg_nosec+0x14/0x3f
[  959.167772]  sock_sendmsg+0x29/0x2e
[  959.167932]  ___sys_sendmsg+0x209/0x28b
[  959.168098]  ? do_raw_spin_unlock+0xcd/0xf8
[  959.168267]  ? _raw_spin_unlock+0x27/0x31
[  959.168432]  ? __handle_mm_fault+0x651/0xdb1
[  959.168602]  ? check_chain_key+0xb0/0xfd
[  959.168773]  __sys_sendmsg+0x45/0x63
[  959.168934]  ? __sys_sendmsg+0x45/0x63
[  959.169100]  SyS_sendmsg+0x19/0x1b
[  959.169260]  entry_SYSCALL_64_fastpath+0x23/0xc2
[  959.169432] RIP: 0033:0x7fcc5097e690
[  959.169592] RSP: 002b:00007ffd0d5c7b48 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
[  959.169887] RAX: ffffffffffffffda RBX: ffffffff810d278c RCX: 00007fcc5097e690
[  959.170089] RDX: 0000000000000000 RSI: 00007ffd0d5c7b90 RDI: 0000000000000003
[  959.170292] RBP: ffff8800376d3f98 R08: 0000000000000001 R09: 0000000000000003
[  959.170494] R10: 00007ffd0d5c7910 R11: 0000000000000246 R12: 0000000000000006
[  959.170697] R13: 000000000066f1a0 R14: 00007ffd0d5cfc40 R15: 0000000000000000
[  959.170900]  ? trace_hardirqs_off_caller+0xa7/0xcf
[  959.171076] Code: 00 41 c7 84 24 14 01 00 00 00 00 00 00 41 c7 84 24
98 00 00 00 00 00 00 00 41 5c 41 5d 41 5e 5d c3 66 66 66 66 90 55 48 89
e5 53 <48> 8b 47 18 48 89 fb 48 8b 40 48 48 85 c0 74 02 ff d0 48 8b bb
[  959.171637] RIP: qdisc_reset+0xa/0x5c RSP: ffff8800376d3610
[  959.171821] CR2: 0000000000000018

Fixes: 87b60cfa ("net_sched: fix error recovery at qdisc creation")
Fixes: 0fbbeb1b ("[PKT_SCHED]: Fix missing qdisc_destroy() in qdisc_create_dflt()")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

c2d6511e

sch_sfq: fix null pointer dereference on init failure · e2326576

Nikolay Aleksandrov authored Aug 30, 2017

Currently only a memory allocation failure can lead to this, so let's
initialize the timer first.

Fixes: 6529eaba ("net: sched: introduce tcf block infractructure")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

e2326576

sch_netem: avoid null pointer deref on init failure · 634576a1

Nikolay Aleksandrov authored Aug 30, 2017

netem can fail in ->init due to missing options (either not supplied by
user-space or used as a default qdisc) causing a timer->base null
pointer deref in its ->destroy() and ->reset() callbacks.

Reproduce:
$ sysctl net.core.default_qdisc=netem
$ ip l set ethX up

Crash log:
[ 1814.846943] BUG: unable to handle kernel NULL pointer dereference at (null)
[ 1814.847181] IP: hrtimer_active+0x17/0x8a
[ 1814.847270] PGD 59c34067
[ 1814.847271] P4D 59c34067
[ 1814.847337] PUD 37374067
[ 1814.847403] PMD 0
[ 1814.847468]
[ 1814.847582] Oops: 0000 [#1] SMP
[ 1814.847655] Modules linked in: sch_netem(O) sch_fq_codel(O)
[ 1814.847761] CPU: 3 PID: 1573 Comm: ip Tainted: G           O 4.13.0-rc6+ #62
[ 1814.847884] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014
[ 1814.848043] task: ffff88003723a700 task.stack: ffff88005adc8000
[ 1814.848235] RIP: 0010:hrtimer_active+0x17/0x8a
[ 1814.848407] RSP: 0018:ffff88005adcb590 EFLAGS: 00010246
[ 1814.848590] RAX: 0000000000000000 RBX: ffff880058e359d8 RCX: 0000000000000000
[ 1814.848793] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff880058e359d8
[ 1814.848998] RBP: ffff88005adcb5b0 R08: 00000000014080c0 R09: 00000000ffffffff
[ 1814.849204] R10: ffff88005adcb660 R11: 0000000000000020 R12: 0000000000000000
[ 1814.849410] R13: ffff880058e359d8 R14: 00000000ffffffff R15: 0000000000000001
[ 1814.849616] FS:  00007f733bbca740(0000) GS:ffff88005d980000(0000) knlGS:0000000000000000
[ 1814.849919] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1814.850107] CR2: 0000000000000000 CR3: 0000000059f0d000 CR4: 00000000000406e0
[ 1814.850313] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1814.850518] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 1814.850723] Call Trace:
[ 1814.850875]  hrtimer_try_to_cancel+0x1a/0x93
[ 1814.851047]  hrtimer_cancel+0x15/0x20
[ 1814.851211]  qdisc_watchdog_cancel+0x12/0x14
[ 1814.851383]  netem_reset+0xe6/0xed [sch_netem]
[ 1814.851561]  qdisc_destroy+0x8b/0xe5
[ 1814.851723]  qdisc_create_dflt+0x86/0x94
[ 1814.851890]  ? dev_activate+0x129/0x129
[ 1814.852057]  attach_one_default_qdisc+0x36/0x63
[ 1814.852232]  netdev_for_each_tx_queue+0x3d/0x48
[ 1814.852406]  dev_activate+0x4b/0x129
[ 1814.852569]  __dev_open+0xe7/0x104
[ 1814.852730]  __dev_change_flags+0xc6/0x15c
[ 1814.852899]  dev_change_flags+0x25/0x59
[ 1814.853064]  do_setlink+0x30c/0xb3f
[ 1814.853228]  ? check_chain_key+0xb0/0xfd
[ 1814.853396]  ? check_chain_key+0xb0/0xfd
[ 1814.853565]  rtnl_newlink+0x3a4/0x729
[ 1814.853728]  ? rtnl_newlink+0x117/0x729
[ 1814.853905]  ? ns_capable_common+0xd/0xb1
[ 1814.854072]  ? ns_capable+0x13/0x15
[ 1814.854234]  rtnetlink_rcv_msg+0x188/0x197
[ 1814.854404]  ? rcu_read_unlock+0x3e/0x5f
[ 1814.854572]  ? rtnl_newlink+0x729/0x729
[ 1814.854737]  netlink_rcv_skb+0x6c/0xce
[ 1814.854902]  rtnetlink_rcv+0x23/0x2a
[ 1814.855064]  netlink_unicast+0x103/0x181
[ 1814.855230]  netlink_sendmsg+0x326/0x337
[ 1814.855398]  sock_sendmsg_nosec+0x14/0x3f
[ 1814.855584]  sock_sendmsg+0x29/0x2e
[ 1814.855747]  ___sys_sendmsg+0x209/0x28b
[ 1814.855912]  ? do_raw_spin_unlock+0xcd/0xf8
[ 1814.856082]  ? _raw_spin_unlock+0x27/0x31
[ 1814.856251]  ? __handle_mm_fault+0x651/0xdb1
[ 1814.856421]  ? check_chain_key+0xb0/0xfd
[ 1814.856592]  __sys_sendmsg+0x45/0x63
[ 1814.856755]  ? __sys_sendmsg+0x45/0x63
[ 1814.856923]  SyS_sendmsg+0x19/0x1b
[ 1814.857083]  entry_SYSCALL_64_fastpath+0x23/0xc2
[ 1814.857256] RIP: 0033:0x7f733b2dd690
[ 1814.857419] RSP: 002b:00007ffe1d3387d8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
[ 1814.858238] RAX: ffffffffffffffda RBX: ffffffff810d278c RCX: 00007f733b2dd690
[ 1814.858445] RDX: 0000000000000000 RSI: 00007ffe1d338820 RDI: 0000000000000003
[ 1814.858651] RBP: ffff88005adcbf98 R08: 0000000000000001 R09: 0000000000000003
[ 1814.858856] R10: 00007ffe1d3385a0 R11: 0000000000000246 R12: 0000000000000002
[ 1814.859060] R13: 000000000066f1a0 R14: 00007ffe1d3408d0 R15: 0000000000000000
[ 1814.859267]  ? trace_hardirqs_off_caller+0xa7/0xcf
[ 1814.859446] Code: 10 55 48 89 c7 48 89 e5 e8 45 a1 fb ff 31 c0 5d c3
31 c0 c3 66 66 66 66 90 55 48 89 e5 41 56 41 55 41 54 53 49 89 fd 49 8b
45 30 <4c> 8b 20 41 8b 5c 24 38 31 c9 31 d2 48 c7 c7 50 8e 1d 82 41 89
[ 1814.860022] RIP: hrtimer_active+0x17/0x8a RSP: ffff88005adcb590
[ 1814.860214] CR2: 0000000000000000

Fixes: 87b60cfa ("net_sched: fix error recovery at qdisc creation")
Fixes: 0fbbeb1b ("[PKT_SCHED]: Fix missing qdisc_destroy() in qdisc_create_dflt()")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

634576a1

sch_fq_codel: avoid double free on init failure · 30c31d74

Nikolay Aleksandrov authored Aug 30, 2017

It is very unlikely to happen but the backlogs memory allocation
could fail and will free q->flows, but then ->destroy() will free
q->flows too. For correctness remove the first free and let ->destroy
clean up.

Fixes: 87b60cfa ("net_sched: fix error recovery at qdisc creation")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

30c31d74

sch_cbq: fix null pointer dereferences on init failure · 3501d059

Nikolay Aleksandrov authored Aug 30, 2017

CBQ can fail on ->init by wrong nl attributes or simply for missing any,
f.e. if it's set as a default qdisc then TCA_OPTIONS (opt) will be NULL
when it is activated. The first thing init does is parse opt but it will
dereference a null pointer if used as a default qdisc, also since init
failure at default qdisc invokes ->reset() which cancels all timers then
we'll also dereference two more null pointers (timer->base) as they were
never initialized.

To reproduce:
$ sysctl net.core.default_qdisc=cbq
$ ip l set ethX up

Crash log of the first null ptr deref:
[44727.907454] BUG: unable to handle kernel NULL pointer dereference at (null)
[44727.907600] IP: cbq_init+0x27/0x205
[44727.907676] PGD 59ff4067
[44727.907677] P4D 59ff4067
[44727.907742] PUD 59c70067
[44727.907807] PMD 0
[44727.907873]
[44727.907982] Oops: 0000 [#1] SMP
[44727.908054] Modules linked in:
[44727.908126] CPU: 1 PID: 21312 Comm: ip Not tainted 4.13.0-rc6+ #60
[44727.908235] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014
[44727.908477] task: ffff88005ad42700 task.stack: ffff880037214000
[44727.908672] RIP: 0010:cbq_init+0x27/0x205
[44727.908838] RSP: 0018:ffff8800372175f0 EFLAGS: 00010286
[44727.909018] RAX: ffffffff816c3852 RBX: ffff880058c53800 RCX: 0000000000000000
[44727.909222] RDX: 0000000000000004 RSI: 0000000000000000 RDI: ffff8800372175f8
[44727.909427] RBP: ffff880037217650 R08: ffffffff81b0f380 R09: 0000000000000000
[44727.909631] R10: ffff880037217660 R11: 0000000000000020 R12: ffffffff822a44c0
[44727.909835] R13: ffff880058b92000 R14: 00000000ffffffff R15: 0000000000000001
[44727.910040] FS:  00007ff8bc583740(0000) GS:ffff88005d880000(0000) knlGS:0000000000000000
[44727.910339] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[44727.910525] CR2: 0000000000000000 CR3: 00000000371e5000 CR4: 00000000000406e0
[44727.910731] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[44727.910936] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[44727.911141] Call Trace:
[44727.911291]  ? lockdep_init_map+0xb6/0x1ba
[44727.911461]  ? qdisc_alloc+0x14e/0x187
[44727.911626]  qdisc_create_dflt+0x7a/0x94
[44727.911794]  ? dev_activate+0x129/0x129
[44727.911959]  attach_one_default_qdisc+0x36/0x63
[44727.912132]  netdev_for_each_tx_queue+0x3d/0x48
[44727.912305]  dev_activate+0x4b/0x129
[44727.912468]  __dev_open+0xe7/0x104
[44727.912631]  __dev_change_flags+0xc6/0x15c
[44727.912799]  dev_change_flags+0x25/0x59
[44727.912966]  do_setlink+0x30c/0xb3f
[44727.913129]  ? check_chain_key+0xb0/0xfd
[44727.913294]  ? check_chain_key+0xb0/0xfd
[44727.913463]  rtnl_newlink+0x3a4/0x729
[44727.913626]  ? rtnl_newlink+0x117/0x729
[44727.913801]  ? ns_capable_common+0xd/0xb1
[44727.913968]  ? ns_capable+0x13/0x15
[44727.914131]  rtnetlink_rcv_msg+0x188/0x197
[44727.914300]  ? rcu_read_unlock+0x3e/0x5f
[44727.914465]  ? rtnl_newlink+0x729/0x729
[44727.914630]  netlink_rcv_skb+0x6c/0xce
[44727.914796]  rtnetlink_rcv+0x23/0x2a
[44727.914956]  netlink_unicast+0x103/0x181
[44727.915122]  netlink_sendmsg+0x326/0x337
[44727.915291]  sock_sendmsg_nosec+0x14/0x3f
[44727.915459]  sock_sendmsg+0x29/0x2e
[44727.915619]  ___sys_sendmsg+0x209/0x28b
[44727.915784]  ? do_raw_spin_unlock+0xcd/0xf8
[44727.915954]  ? _raw_spin_unlock+0x27/0x31
[44727.916121]  ? __handle_mm_fault+0x651/0xdb1
[44727.916290]  ? check_chain_key+0xb0/0xfd
[44727.916461]  __sys_sendmsg+0x45/0x63
[44727.916626]  ? __sys_sendmsg+0x45/0x63
[44727.916792]  SyS_sendmsg+0x19/0x1b
[44727.916950]  entry_SYSCALL_64_fastpath+0x23/0xc2
[44727.917125] RIP: 0033:0x7ff8bbc96690
[44727.917286] RSP: 002b:00007ffc360991e8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
[44727.917579] RAX: ffffffffffffffda RBX: ffffffff810d278c RCX: 00007ff8bbc96690
[44727.917783] RDX: 0000000000000000 RSI: 00007ffc36099230 RDI: 0000000000000003
[44727.917987] RBP: ffff880037217f98 R08: 0000000000000001 R09: 0000000000000003
[44727.918190] R10: 00007ffc36098fb0 R11: 0000000000000246 R12: 0000000000000006
[44727.918393] R13: 000000000066f1a0 R14: 00007ffc360a12e0 R15: 0000000000000000
[44727.918597]  ? trace_hardirqs_off_caller+0xa7/0xcf
[44727.918774] Code: 41 5f 5d c3 66 66 66 66 90 55 48 8d 56 04 45 31 c9
49 c7 c0 80 f3 b0 81 48 89 e5 41 55 41 54 53 48 89 fb 48 8d 7d a8 48 83
ec 48 <0f> b7 0e be 07 00 00 00 83 e9 04 e8 e6 f7 d8 ff 85 c0 0f 88 bb
[44727.919332] RIP: cbq_init+0x27/0x205 RSP: ffff8800372175f0
[44727.919516] CR2: 0000000000000000

Fixes: 0fbbeb1b ("[PKT_SCHED]: Fix missing qdisc_destroy() in qdisc_create_dflt()")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

3501d059

sch_hfsc: fix null pointer deref and double free on init failure · 3bdac362

Nikolay Aleksandrov authored Aug 30, 2017

Depending on where ->init fails we can get a null pointer deref due to
uninitialized hires timer (watchdog) or a double free of the qdisc hash
because it is already freed by ->destroy().

Fixes: 8d553738 ("net/sched/hfsc: allocate tcf block for hfsc root class")
Fixes: 87b60cfa ("net_sched: fix error recovery at qdisc creation")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

3bdac362

sch_hhf: fix null pointer dereference on init failure · 32db864d

Nikolay Aleksandrov authored Aug 30, 2017

If sch_hhf fails in its ->init() function (either due to wrong
user-space arguments as below or memory alloc failure of hh_flows) it
will do a null pointer deref of q->hh_flows in its ->destroy() function.

To reproduce the crash:
$ tc qdisc add dev eth0 root hhf quantum 2000000 non_hh_weight 10000000

Crash log:
[  690.654882] BUG: unable to handle kernel NULL pointer dereference at (null)
[  690.655565] IP: hhf_destroy+0x48/0xbc
[  690.655944] PGD 37345067
[  690.655948] P4D 37345067
[  690.656252] PUD 58402067
[  690.656554] PMD 0
[  690.656857]
[  690.657362] Oops: 0000 [#1] SMP
[  690.657696] Modules linked in:
[  690.658032] CPU: 3 PID: 920 Comm: tc Not tainted 4.13.0-rc6+ #57
[  690.658525] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014
[  690.659255] task: ffff880058578000 task.stack: ffff88005acbc000
[  690.659747] RIP: 0010:hhf_destroy+0x48/0xbc
[  690.660146] RSP: 0018:ffff88005acbf9e0 EFLAGS: 00010246
[  690.660601] RAX: 0000000000000000 RBX: 0000000000000020 RCX: 0000000000000000
[  690.661155] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffffffff821f63f0
[  690.661710] RBP: ffff88005acbfa08 R08: ffffffff81b10a90 R09: 0000000000000000
[  690.662267] R10: 00000000f42b7019 R11: ffff880058578000 R12: 00000000ffffffea
[  690.662820] R13: ffff8800372f6400 R14: 0000000000000000 R15: 0000000000000000
[  690.663769] FS:  00007f8ae5e8b740(0000) GS:ffff88005d980000(0000) knlGS:0000000000000000
[  690.667069] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  690.667965] CR2: 0000000000000000 CR3: 0000000058523000 CR4: 00000000000406e0
[  690.668918] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  690.669945] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  690.671003] Call Trace:
[  690.671743]  qdisc_create+0x377/0x3fd
[  690.672534]  tc_modify_qdisc+0x4d2/0x4fd
[  690.673324]  rtnetlink_rcv_msg+0x188/0x197
[  690.674204]  ? rcu_read_unlock+0x3e/0x5f
[  690.675091]  ? rtnl_newlink+0x729/0x729
[  690.675877]  netlink_rcv_skb+0x6c/0xce
[  690.676648]  rtnetlink_rcv+0x23/0x2a
[  690.677405]  netlink_unicast+0x103/0x181
[  690.678179]  netlink_sendmsg+0x326/0x337
[  690.678958]  sock_sendmsg_nosec+0x14/0x3f
[  690.679743]  sock_sendmsg+0x29/0x2e
[  690.680506]  ___sys_sendmsg+0x209/0x28b
[  690.681283]  ? __handle_mm_fault+0xc7d/0xdb1
[  690.681915]  ? check_chain_key+0xb0/0xfd
[  690.682449]  __sys_sendmsg+0x45/0x63
[  690.682954]  ? __sys_sendmsg+0x45/0x63
[  690.683471]  SyS_sendmsg+0x19/0x1b
[  690.683974]  entry_SYSCALL_64_fastpath+0x23/0xc2
[  690.684516] RIP: 0033:0x7f8ae529d690
[  690.685016] RSP: 002b:00007fff26d2d6b8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
[  690.685931] RAX: ffffffffffffffda RBX: ffffffff810d278c RCX: 00007f8ae529d690
[  690.686573] RDX: 0000000000000000 RSI: 00007fff26d2d700 RDI: 0000000000000003
[  690.687047] RBP: ffff88005acbff98 R08: 0000000000000001 R09: 0000000000000000
[  690.687519] R10: 00007fff26d2d480 R11: 0000000000000246 R12: 0000000000000002
[  690.687996] R13: 0000000001258070 R14: 0000000000000001 R15: 0000000000000000
[  690.688475]  ? trace_hardirqs_off_caller+0xa7/0xcf
[  690.688887] Code: 00 00 e8 2a 02 ae ff 49 8b bc 1d 60 02 00 00 48 83
c3 08 e8 19 02 ae ff 48 83 fb 20 75 dc 45 31 f6 4d 89 f7 4d 03 bd 20 02
00 00 <49> 8b 07 49 39 c7 75 24 49 83 c6 10 49 81 fe 00 40 00 00 75 e1
[  690.690200] RIP: hhf_destroy+0x48/0xbc RSP: ffff88005acbf9e0
[  690.690636] CR2: 0000000000000000

Fixes: 87b60cfa ("net_sched: fix error recovery at qdisc creation")
Fixes: 10239edf ("net-qdisc-hhf: Heavy-Hitter Filter (HHF) qdisc")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

32db864d

sch_multiq: fix double free on init failure · e89d469e

Nikolay Aleksandrov authored Aug 30, 2017

The below commit added a call to ->destroy() on init failure, but multiq
still frees ->queues on error in init, but ->queues is also freed by
->destroy() thus we get double free and corrupted memory.

Very easy to reproduce (eth0 not multiqueue):
$ tc qdisc add dev eth0 root multiq
RTNETLINK answers: Operation not supported
$ ip l add dumdum type dummy
(crash)

Trace log:
[ 3929.467747] general protection fault: 0000 [#1] SMP
[ 3929.468083] Modules linked in:
[ 3929.468302] CPU: 3 PID: 967 Comm: ip Not tainted 4.13.0-rc6+ #56
[ 3929.468625] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014
[ 3929.469124] task: ffff88003716a700 task.stack: ffff88005872c000
[ 3929.469449] RIP: 0010:__kmalloc_track_caller+0x117/0x1be
[ 3929.469746] RSP: 0018:ffff88005872f6a0 EFLAGS: 00010246
[ 3929.470042] RAX: 00000000000002de RBX: 0000000058a59000 RCX: 00000000000002df
[ 3929.470406] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff821f7020
[ 3929.470770] RBP: ffff88005872f6e8 R08: 000000000001f010 R09: 0000000000000000
[ 3929.471133] R10: ffff88005872f730 R11: 0000000000008cdd R12: ff006d75646d7564
[ 3929.471496] R13: 00000000014000c0 R14: ffff88005b403c00 R15: ffff88005b403c00
[ 3929.471869] FS:  00007f0b70480740(0000) GS:ffff88005d980000(0000) knlGS:0000000000000000
[ 3929.472286] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 3929.472677] CR2: 00007ffcee4f3000 CR3: 0000000059d45000 CR4: 00000000000406e0
[ 3929.473209] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 3929.474109] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 3929.474873] Call Trace:
[ 3929.475337]  ? kstrdup_const+0x23/0x25
[ 3929.475863]  kstrdup+0x2e/0x4b
[ 3929.476338]  kstrdup_const+0x23/0x25
[ 3929.478084]  __kernfs_new_node+0x28/0xbc
[ 3929.478478]  kernfs_new_node+0x35/0x55
[ 3929.478929]  kernfs_create_link+0x23/0x76
[ 3929.479478]  sysfs_do_create_link_sd.isra.2+0x85/0xd7
[ 3929.480096]  sysfs_create_link+0x33/0x35
[ 3929.480649]  device_add+0x200/0x589
[ 3929.481184]  netdev_register_kobject+0x7c/0x12f
[ 3929.481711]  register_netdevice+0x373/0x471
[ 3929.482174]  rtnl_newlink+0x614/0x729
[ 3929.482610]  ? rtnl_newlink+0x17f/0x729
[ 3929.483080]  rtnetlink_rcv_msg+0x188/0x197
[ 3929.483533]  ? rcu_read_unlock+0x3e/0x5f
[ 3929.483984]  ? rtnl_newlink+0x729/0x729
[ 3929.484420]  netlink_rcv_skb+0x6c/0xce
[ 3929.484858]  rtnetlink_rcv+0x23/0x2a
[ 3929.485291]  netlink_unicast+0x103/0x181
[ 3929.485735]  netlink_sendmsg+0x326/0x337
[ 3929.486181]  sock_sendmsg_nosec+0x14/0x3f
[ 3929.486614]  sock_sendmsg+0x29/0x2e
[ 3929.486973]  ___sys_sendmsg+0x209/0x28b
[ 3929.487340]  ? do_raw_spin_unlock+0xcd/0xf8
[ 3929.487719]  ? _raw_spin_unlock+0x27/0x31
[ 3929.488092]  ? __handle_mm_fault+0x651/0xdb1
[ 3929.488471]  ? check_chain_key+0xb0/0xfd
[ 3929.488847]  __sys_sendmsg+0x45/0x63
[ 3929.489206]  ? __sys_sendmsg+0x45/0x63
[ 3929.489576]  SyS_sendmsg+0x19/0x1b
[ 3929.489901]  entry_SYSCALL_64_fastpath+0x23/0xc2
[ 3929.490172] RIP: 0033:0x7f0b6fb93690
[ 3929.490423] RSP: 002b:00007ffcee4ed588 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
[ 3929.490881] RAX: ffffffffffffffda RBX: ffffffff810d278c RCX: 00007f0b6fb93690
[ 3929.491198] RDX: 0000000000000000 RSI: 00007ffcee4ed5d0 RDI: 0000000000000003
[ 3929.491521] RBP: ffff88005872ff98 R08: 0000000000000001 R09: 0000000000000000
[ 3929.491801] R10: 00007ffcee4ed350 R11: 0000000000000246 R12: 0000000000000002
[ 3929.492075] R13: 000000000066f1a0 R14: 00007ffcee4f5680 R15: 0000000000000000
[ 3929.492352]  ? trace_hardirqs_off_caller+0xa7/0xcf
[ 3929.492590] Code: 8b 45 c0 48 8b 45 b8 74 17 48 8b 4d c8 83 ca ff 44
89 ee 4c 89 f7 e8 83 ca ff ff 49 89 c4 eb 49 49 63 56 20 48 8d 48 01 4d
8b 06 <49> 8b 1c 14 48 89 c2 4c 89 e0 65 49 0f c7 08 0f 94 c0 83 f0 01
[ 3929.493335] RIP: __kmalloc_track_caller+0x117/0x1be RSP: ffff88005872f6a0

Fixes: 87b60cfa ("net_sched: fix error recovery at qdisc creation")
Fixes: f07d1501 ("multiq: Further multiqueue cleanup")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

e89d469e

sch_htb: fix crash on init failure · 88c2ace6

Nikolay Aleksandrov authored Aug 30, 2017

The commit below added a call to the ->destroy() callback for all qdiscs
which failed in their ->init(), but some were not prepared for such
change and can't handle partially initialized qdisc. HTB is one of them
and if any error occurs before the qdisc watchdog timer and qdisc work are
initialized then we can hit either a null ptr deref (timer->base) when
canceling in ->destroy or lockdep error info about trying to register
a non-static key and a stack dump. So to fix these two move the watchdog
timer and workqueue init before anything that can err out.
To reproduce userspace needs to send broken htb qdisc create request,
tested with a modified tc (q_htb.c).

Trace log:
[ 2710.897602] BUG: unable to handle kernel NULL pointer dereference at (null)
[ 2710.897977] IP: hrtimer_active+0x17/0x8a
[ 2710.898174] PGD 58fab067
[ 2710.898175] P4D 58fab067
[ 2710.898353] PUD 586c0067
[ 2710.898531] PMD 0
[ 2710.898710]
[ 2710.899045] Oops: 0000 [#1] SMP
[ 2710.899232] Modules linked in:
[ 2710.899419] CPU: 1 PID: 950 Comm: tc Not tainted 4.13.0-rc6+ #54
[ 2710.899646] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014
[ 2710.900035] task: ffff880059ed2700 task.stack: ffff88005ad4c000
[ 2710.900262] RIP: 0010:hrtimer_active+0x17/0x8a
[ 2710.900467] RSP: 0018:ffff88005ad4f960 EFLAGS: 00010246
[ 2710.900684] RAX: 0000000000000000 RBX: ffff88003701e298 RCX: 0000000000000000
[ 2710.900933] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88003701e298
[ 2710.901177] RBP: ffff88005ad4f980 R08: 0000000000000001 R09: 0000000000000001
[ 2710.901419] R10: ffff88005ad4f800 R11: 0000000000000400 R12: 0000000000000000
[ 2710.901663] R13: ffff88003701e298 R14: ffffffff822a4540 R15: ffff88005ad4fac0
[ 2710.901907] FS:  00007f2f5e90f740(0000) GS:ffff88005d880000(0000) knlGS:0000000000000000
[ 2710.902277] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 2710.902500] CR2: 0000000000000000 CR3: 0000000058ca3000 CR4: 00000000000406e0
[ 2710.902744] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 2710.902977] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 2710.903180] Call Trace:
[ 2710.903332]  hrtimer_try_to_cancel+0x1a/0x93
[ 2710.903504]  hrtimer_cancel+0x15/0x20
[ 2710.903667]  qdisc_watchdog_cancel+0x12/0x14
[ 2710.903866]  htb_destroy+0x2e/0xf7
[ 2710.904097]  qdisc_create+0x377/0x3fd
[ 2710.904330]  tc_modify_qdisc+0x4d2/0x4fd
[ 2710.904511]  rtnetlink_rcv_msg+0x188/0x197
[ 2710.904682]  ? rcu_read_unlock+0x3e/0x5f
[ 2710.904849]  ? rtnl_newlink+0x729/0x729
[ 2710.905017]  netlink_rcv_skb+0x6c/0xce
[ 2710.905183]  rtnetlink_rcv+0x23/0x2a
[ 2710.905345]  netlink_unicast+0x103/0x181
[ 2710.905511]  netlink_sendmsg+0x326/0x337
[ 2710.905679]  sock_sendmsg_nosec+0x14/0x3f
[ 2710.905847]  sock_sendmsg+0x29/0x2e
[ 2710.906010]  ___sys_sendmsg+0x209/0x28b
[ 2710.906176]  ? do_raw_spin_unlock+0xcd/0xf8
[ 2710.906346]  ? _raw_spin_unlock+0x27/0x31
[ 2710.906514]  ? __handle_mm_fault+0x651/0xdb1
[ 2710.906685]  ? check_chain_key+0xb0/0xfd
[ 2710.906855]  __sys_sendmsg+0x45/0x63
[ 2710.907018]  ? __sys_sendmsg+0x45/0x63
[ 2710.907185]  SyS_sendmsg+0x19/0x1b
[ 2710.907344]  entry_SYSCALL_64_fastpath+0x23/0xc2

Note that probably this bug goes further back because the default qdisc
handling always calls ->destroy on init failure too.

Fixes: 87b60cfa ("net_sched: fix error recovery at qdisc creation")
Fixes: 0fbbeb1b ("[PKT_SCHED]: Fix missing qdisc_destroy() in qdisc_create_dflt()")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

88c2ace6

net/mlx5e: Fix CQ moderation mode not set properly · 1213ad28

Tal Gilboa authored Aug 28, 2017

cq_period_mode assignment was mistakenly removed so it was always set to "0",
which is EQE based moderation, regardless of the device CAPs and
requested value in ethtool.

Fixes: 6a9764ef ("net/mlx5e: Isolate open_channels from priv->params")
Signed-off-by: Tal Gilboa <talgi@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

1213ad28

net/mlx5e: Fix inline header size for small packets · 6aace17e

Moshe Shemesh authored Aug 08, 2017

Fix inline header size, make sure it is not greater than skb len.
This bug effects small packets, for example L2 packets with size < 18.

Fixes: ae76715d ("net/mlx5e: Check the minimum inline header mode before xmit")
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

6aace17e

net/mlx5: E-Switch, Unload the representors in the correct order · 19122039

Shahar Klein authored Aug 01, 2017

When changing from switchdev to legacy mode, all the representor port
devices (uplink nic and reps) are cleaned up. Part of this cleaning
process is removing the neigh entries and the hash table containing them.
However, a representor neigh entry might be linked to the uplink port
hash table and if the uplink nic is cleaned first the cleaning of the
representor will end up in null deref.
Fix that by unloading the representors in the opposite order of load.

Fixes: cb67b832 ("net/mlx5e: Introduce SRIOV VF representors")
Signed-off-by: Shahar Klein <shahark@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

19122039

net/mlx5e: Properly resolve TC offloaded ipv6 vxlan tunnel source address · 08820528

Paul Blakey authored Aug 22, 2017

Currently if vxlan tunnel ipv6 src isn't supplied the driver fails to
resolve it as part of the route lookup. The resulting encap header
is left with a zeroed out ipv6 src address so the packets are sent
with this src ip.

Use an appropriate route lookup API that also resolves the source
ipv6 address if it's not supplied.

Fixes: ce99f6b9 ('net/mlx5e: Support SRIOV TC encapsulation offloads for IPv6 tunnels')
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

08820528

net/mlx5e: Don't override user RSS upon set channels · 5a8e1267

Inbar Karmy authored Aug 14, 2017

Currently, increasing the number of combined channels is changing
the RSS spread to use the new created channels.
Prevent the RSS spread change in case the user explicitly declare it,
to avoid overriding user configuration.

Tested:
when RSS default:

# ethtool -L ens8 combined 4
RSS spread will change and point to 4 channels.

# ethtool -X ens8 equal 4
# ethtool -L ens8 combined 6
RSS will not change after increasing the number of the channels.

Fixes: 8bf36862 ('ethtool: ensure channel counts are within bounds during SCHANNELS')
Signed-off-by: Inbar Karmy <inbark@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

5a8e1267

net/mlx5e: Fix dangling page pointer on DMA mapping error · 0556ce72

Eran Ben Elisha authored Aug 16, 2017

Function mlx5e_dealloc_rx_wqe is using page pointer value as an
indication to valid DMA mapping. In case that the mapping failed, we
released the page but kept the dangling pointer. Store the page pointer
only after the DMA mapping passed to avoid invalid page DMA unmap.

Fixes: bc77b240 ("net/mlx5e: Add fragmented memory support for RX multi packet WQE")
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

0556ce72

net/mlx5: Remove the flag MLX5_INTERFACE_STATE_SHUTDOWN · 10a8d007

Huy Nguyen authored Aug 09, 2017

MLX5_INTERFACE_STATE_SHUTDOWN is not used in the code.

Fixes: 5fc7197d ("net/mlx5: Add pci shutdown callback")
Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

10a8d007

net/mlx5: Skip mlx5_unload_one if mlx5_load_one fails · b3cb5388

Huy Nguyen authored Aug 08, 2017

There is an issue where the firmware fails during mlx5_load_one,
the health_care timer detects the issue and schedules a health_care call.
Then the mlx5_load_one detects the issue, cleans up and quits. Then
the health_care starts and calls mlx5_unload_one to clean up the resources
that no longer exist and causes kernel panic.

The root cause is that the bit MLX5_INTERFACE_STATE_DOWN is not set
after mlx5_load_one fails. The solution is removing the bit
MLX5_INTERFACE_STATE_DOWN and quit mlx5_unload_one if the
bit MLX5_INTERFACE_STATE_UP is not set. The bit MLX5_INTERFACE_STATE_DOWN
is redundant and we can use MLX5_INTERFACE_STATE_UP instead.

Fixes: 5fc7197d ("net/mlx5: Add pci shutdown callback")
Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

b3cb5388

net/mlx5: Fix arm SRQ command for ISSI version 0 · 672d0880

Noa Osherovich authored Jul 30, 2017

Support for ISSI version 0 was recently broken as the arm_srq_cmd
command, which is used only for ISSI version 0, was given the opcode
for ISSI version 1 instead of ISSI version 0.

Change arm_srq_cmd to use the correct command opcode for ISSI version
0.

Fixes: af1ba291 ('{net, IB}/mlx5: Refactor internal SRQ API')
Signed-off-by: Noa Osherovich <noaos@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

672d0880

net/mlx5e: Fix DCB_CAP_ATTR_DCBX capability for DCBNL getcap. · 9e10bf1d

Huy Nguyen authored Jul 10, 2017

Current code doesn't report DCB_CAP_DCBX_HOST capability when query
through getcap. User space lldptool expects capability to have HOST mode
set when it wants to configure DCBX CEE mode. In absence of HOST mode
capability, lldptool fails to switch to CEE mode.

This fix returns DCB_CAP_DCBX_HOST capability when port's DCBX
controlled mode is under software control.

Fixes: 3a6a931d ("net/mlx5e: Support DCBX CEE API")
Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

9e10bf1d

net/mlx5e: Check for qos capability in dcbnl_initialize · 33c52b67

Huy Nguyen authored Jul 13, 2017

qos capability is the master capability bit that determines
if the DCBX is supported for the PCI function. If this bit is off,
driver cannot run any dcbx code.

Fixes: e207b7e9 ("net/mlx5e: ConnectX-4 firmware support for DCBX")
Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

33c52b67

net: ti: cpsw-common: dont print error if ti_cm_get_macid() fails · f0e82d73

Sekhar Nori authored Aug 30, 2017

It is quite common for ti_cm_get_macid() to fail on some of the
platforms it is invoked on. They include any platform where
mac address is not part of SoC register space.

On these platforms, mac address is read and populated in
device-tree by bootloader. An example is TI DA850.

Downgrade the severity of message to "information", so it does
not spam logs when 'quiet' boot is desired.
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

f0e82d73

29 Aug, 2017 12 commits

drivers: net: xgene: Correct probe sequence handling · 183db481

Quan Nguyen authored Aug 29, 2017

The phy is connected at early stage of probe but not properly
disconnected if error occurs.  This patch fixes the issue.

Also changing the return type of xgene_enet_check_phy_handle(),
since this function always returns success.
Signed-off-by: Quan Nguyen <qnguyen@apm.com>
Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

183db481

nfp: double free on error in probe · e7562597

Dan Carpenter authored Aug 29, 2017

Both the nfp_net_pf_app_start() and the nfp_net_pci_probe() functions
call nfp_net_pf_app_stop_ctrl(pf) so there is a double free.  The free
should be done from the probe function because it's allocated there so
I have removed the call from nfp_net_pf_app_start().

Fixes: 02082701 ("nfp: create control vNICs and wire up rx/tx")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

e7562597

Merge branch 'aquantia-fixes' · beae0413

David S. Miller authored Aug 29, 2017

Pavel Belous says:

====================
net:ethernet:aquantia: Atlantic driver Update 2017-08-23

This series contains updates for aQuantia Atlantic driver.

It has bugfixes and some improvements.

Changes in v2:
 - "MCP state change" fix removed (will be sent as
    a separate fix after further investigation.)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

beae0413

net:ethernet:aquantia: Show info message if bad firmware version detected. · 6d3f58e0

Pavel Belous authored Aug 28, 2017

We should inform user about wrong firmware version
by printing message in dmesg.

Fixes: 3d2ff7eebe26 ("net: ethernet: aquantia: Atlantic hardware abstraction layer")
Signed-off-by: Pavel Belous <Pavel.Belous@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

6d3f58e0

net:ethernet:aquantia: Fix for multicast filter handling. · b21f502f

Igor Russkikh authored Aug 28, 2017

Since the HW supports up to 32 multicast filters we should
track count of multicast filters to avoid overflow.
If we attempt to add >32 multicast filter - just set NETIF_ALLMULTI flag
instead.

Fixes: 94f6c9e4cdf6 ("net: ethernet: aquantia: Support for NIC-specific code")
Signed-off-by: Igor Russkikh <Igor.Russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

b21f502f

net:ethernet:aquantia: Fix for incorrect speed index. · bd8ed441

Pavel Belous authored Aug 28, 2017

The driver choose the optimal interrupt throttling settings depends
of current link speed.
Due this bug link_status field from aq_hw is never updated and as result
always used same interrupt throttling values.

Fixes: 3d2ff7eebe26 ("net: ethernet: aquantia: Atlantic hardware abstraction layer")
Signed-off-by: Pavel Belous <Pavel.Belous@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bd8ed441

net:ethernet:aquantia: Workaround for HW checksum bug. · 0a402e7b

Pavel Belous authored Aug 28, 2017

The hardware has the HW Checksum Offload bug when small
TCP patckets (with length <= 60 bytes) has wrong "checksum valid" bit.

The solution is - ignore checksum valid bit for small packets
(with length <= 60 bytes) and mark this as CHECKSUM_NONE to allow
network stack recalculate checksum itself.

Fixes: ccf9a5ed14be ("net: ethernet: aquantia: Atlantic A0 and B0 specific functions.")
Signed-off-by: Pavel Belous <Pavel.Belous@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

0a402e7b

net:ethernet:aquantia: Fix for number of RSS queues. · 64fc7953

Pavel Belous authored Aug 28, 2017

The number of RSS queues should be not more than numbers of CPU.
Its does not make sense to increase perfomance, and also cause problems on
some motherboards.

Fixes: 94f6c9e4cdf6 ("net: ethernet: aquantia: Support for NIC-specific code")
Signed-off-by: Pavel Belous <Pavel.Belous@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

64fc7953

net:ethernet:aquantia: Extra spinlocks removed. · 278175ab

Pavel Belous authored Aug 28, 2017

This patch removes datapath spinlocks which does not perform any
useful work.

Fixes: 6e70637f9f1e ("net: ethernet: aquantia: Add ring support code")
Signed-off-by: Pavel Belous <Pavel.Belous@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

278175ab

packet: Don't write vnet header beyond end of buffer · edbd58be

Benjamin Poirier authored Aug 28, 2017

... which may happen with certain values of tp_reserve and maclen.

Fixes: 58d19b19 ("packet: vnet_hdr support for tpacket_rcv")
Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
Cc: Willem de Bruijn <willemb@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

edbd58be

tipc: permit bond slave as bearer · d55c60eb

Parthasarathy Bhuvaragan authored Aug 28, 2017

For a bond slave device as a tipc bearer, the dev represents the bond
interface and orig_dev represents the slave in tipc_l2_rcv_msg().
Since we decode the tipc_ptr from bonding device (dev), we fail to
find the bearer and thus tipc links are not established.

In this commit, we register the tipc protocol callback per device and
look for tipc bearer from both the devices.
Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

d55c60eb

ipv6: do not set sk_destruct in IPV6_ADDRFORM sockopt · e8d411d2

Xin Long authored Aug 28, 2017

ChunYu found a kernel warn_on during syzkaller fuzzing:

[40226.038539] WARNING: CPU: 5 PID: 23720 at net/ipv4/af_inet.c:152 inet_sock_destruct+0x78d/0x9a0
[40226.144849] Call Trace:
[40226.147590]  <IRQ>
[40226.149859]  dump_stack+0xe2/0x186
[40226.176546]  __warn+0x1a4/0x1e0
[40226.180066]  warn_slowpath_null+0x31/0x40
[40226.184555]  inet_sock_destruct+0x78d/0x9a0
[40226.246355]  __sk_destruct+0xfa/0x8c0
[40226.290612]  rcu_process_callbacks+0xaa0/0x18a0
[40226.336816]  __do_softirq+0x241/0x75e
[40226.367758]  irq_exit+0x1f6/0x220
[40226.371458]  smp_apic_timer_interrupt+0x7b/0xa0
[40226.376507]  apic_timer_interrupt+0x93/0xa0

The warn_on happned when sk->sk_rmem_alloc wasn't 0 in inet_sock_destruct.
As after commit f970bd9e ("udp: implement memory accounting helpers"),
udp has changed to use udp_destruct_sock as sk_destruct where it would
udp_rmem_release all rmem.

But IPV6_ADDRFORM sockopt sets sk_destruct with inet_sock_destruct after
changing family to PF_INET. If rmem is not 0 at that time, and there is
no place to release rmem before calling inet_sock_destruct, the warn_on
will be triggered.

This patch is to fix it by not setting sk_destruct in IPV6_ADDRFORM sockopt
any more. As IPV6_ADDRFORM sockopt only works for tcp and udp. TCP sock has
already set it's sk_destruct with inet_sock_destruct and UDP has set with
udp_destruct_sock since they're created.

Fixes: f970bd9e ("udp: implement memory accounting helpers")
Reported-by: ChunYu Wang <chunwang@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

e8d411d2