- 18 Sep, 2017 1 commit
-
-
Johannes Berg authored
If TX rates are specified during mesh join, the channel must also be specified. Check the channel pointer to avoid a null pointer dereference if it isn't. Reported-by: Jouni Malinen <j@w1.fi> Fixes: 8564e382 ("cfg80211: add checks for beacon rate, extend to mesh") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
- 15 Sep, 2017 1 commit
-
-
Vladis Dronov authored
nl80211_set_rekey_data() does not check if the required attributes NL80211_REKEY_DATA_{REPLAY_CTR,KEK,KCK} are present when processing NL80211_CMD_SET_REKEY_OFFLOAD request. This request can be issued by users with CAP_NET_ADMIN privilege and may result in NULL dereference and a system crash. Add a check for the required attributes presence. This patch is based on the patch by bo Zhang. This fixes CVE-2017-12153. References: https://bugzilla.redhat.com/show_bug.cgi?id=1491046 Fixes: e5497d76 ("cfg80211/nl80211: support GTK rekey offload") Cc: <stable@vger.kernel.org> # v3.1-rc1 Reported-by: bo Zhang <zhangbo5891001@gmail.com> Signed-off-by: Vladis Dronov <vdronov@redhat.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
- 08 Sep, 2017 5 commits
-
-
Håkon Bugge authored
In rds_send_xmit() there is logic to batch the sends. However, if another thread has acquired the lock and has incremented the send_gen, it is considered a race and we yield. The code incrementing the s_send_lock_queue_raced statistics counter did not count this event correctly. This commit counts the race condition correctly. Changes from v1: - Removed check for *someone_on_xmit()* - Fixed incorrect indentation Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com> Reviewed-by: Knut Omang <knut.omang@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arnd Bergmann authored
gcc-7 found an ancient bug in the loop driver, leading to a condition that is always false, meaning we ignore the contents of 'card->flags' here: drivers/isdn/isdnloop/isdnloop.c:412:37: error: ?: using integer constants in boolean context, the expression will always evaluate to 'true' [-Werror=int-in-bool-context] This changes the braces in the expression to ensure we actually compare the flag bits, rather than comparing a constant. As Joe Perches pointed out, an earlier patch of mine incorrectly assumed this was a false-positive warning. Cc: Joe Perches <joe@perches.com> Link: https://patchwork.kernel.org/patch/9840289/Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Paolo Abeni authored
After commit 0ddf3fb2 ("udp: preserve skb->dst if required for IP options processing") we clear the skb head state as soon as the skb carrying them is first processed. Since the same skb can be processed several times when MSG_PEEK is used, we can end up lacking the required head states, and eventually oopsing. Fix this clearing the skb head state only when processing the last skb reference. Reported-by: Eric Dumazet <edumazet@google.com> Fixes: 0ddf3fb2 ("udp: preserve skb->dst if required for IP options processing") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Xin Long authored
Now when probessing ICMPV6_PKT_TOOBIG, ip6gre_err only subtracts the offset of gre header from mtu info. The expected mtu of gre device should also subtract gre header. Otherwise, the next packets still can't be sent out. Jianlin found this issue when using the topo: client(ip6gre)<---->(nic1)route(nic2)<----->(ip6gre)server and reducing nic2's mtu, then both tcp and sctp's performance with big size data became 0. This patch is to fix it by also subtracting grehdr (tun->tun_hlen) from mtu info when updating gre device's mtu in ip6gre_err(). It also needs to subtract ETH_HLEN if gre dev'type is ARPHRD_ETHER. Reported-by: Jianlin Shi <jishi@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
There's a memleak happening for chain 0. The thing is, chain 0 needs to be always present, not created on demand. Therefore tcf_block_get upon creation of block calls the tcf_chain_create function directly. The chain is created with refcnt == 1, which is not correct in this case and causes the memleak. So move the refcnt increment into tcf_chain_get function even for the case when chain needs to be created. Reported-by: Jakub Kicinski <kubakici@wp.pl> Fixes: 5bc17018 ("net: sched: introduce multichain support for filters") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Tested-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 07 Sep, 2017 6 commits
-
-
David S. Miller authored
Merge tag 'mac80211-for-davem-2017-09-07' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Back from a long absence, so we have a number of things: * a remain-on-channel fix from Avi * hwsim TX power fix from Beni * null-PTR dereference with iTXQ in some rare configurations (Chunho) * 40 MHz custom regdomain fixes (Emmanuel) * look at right place in HT/VHT capability parsing (Igor) * complete A-MPDU teardown properly (Ilan) * Mesh ID Element ordering fix (Liad) * avoid tracing warning in ht_dbg() (Sharon) * fix print of assoc/reassoc (Simon) * fix encrypted VLAN with iTXQ (myself) * fix calling context of TX queue wake (myself) * fix a deadlock with ath10k aggregation (myself) ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Kleber Sacilotto de Souza authored
The net device is already stored in the 'net' variable, so no need to call dev_net() again. Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Xin Long authored
Now there is no lock protecting nlk ngroups/groups' accessing in netlink bind and getname. It's safe from nlk groups' setting in netlink_release, but not from netlink_realloc_groups called by netlink_setsockopt. netlink_lock_table is needed in both netlink bind and getname when accessing nlk groups. Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Xin Long authored
ChunYu found a netlink use-after-free issue by syzkaller: [28448.842981] BUG: KASAN: use-after-free in __nla_put+0x37/0x40 at addr ffff8807185e2378 [28448.969918] Call Trace: [...] [28449.117207] __nla_put+0x37/0x40 [28449.132027] nla_put+0xf5/0x130 [28449.146261] sk_diag_fill.isra.4.constprop.5+0x5a0/0x750 [netlink_diag] [28449.176608] __netlink_diag_dump+0x25a/0x700 [netlink_diag] [28449.202215] netlink_diag_dump+0x176/0x240 [netlink_diag] [28449.226834] netlink_dump+0x488/0xbb0 [28449.298014] __netlink_dump_start+0x4e8/0x760 [28449.317924] netlink_diag_handler_dump+0x261/0x340 [netlink_diag] [28449.413414] sock_diag_rcv_msg+0x207/0x390 [28449.432409] netlink_rcv_skb+0x149/0x380 [28449.467647] sock_diag_rcv+0x2d/0x40 [28449.484362] netlink_unicast+0x562/0x7b0 [28449.564790] netlink_sendmsg+0xaa8/0xe60 [28449.661510] sock_sendmsg+0xcf/0x110 [28449.865631] __sys_sendmsg+0xf3/0x240 [28450.000964] SyS_sendmsg+0x32/0x50 [28450.016969] do_syscall_64+0x25c/0x6c0 [28450.154439] entry_SYSCALL64_slow_path+0x25/0x25 It was caused by no protection between nlk groups' free in netlink_release and nlk groups' accessing in sk_diag_dump_groups. The similar issue also exists in netlink_seq_show(). This patch is to defer nlk groups' free in deferred_put_nlk_sk. Reported-by: ChunYu Wang <chunwang@redhat.com> Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Gao Feng authored
The commit 520ac30f ("net_sched: drop packets after root qdisc lock is released) made a big change of tc for performance. There are two points left in sch_prio and sch_qfq which are not changed with that commit. Now enhance them now with __qdisc_drop. Signed-off-by: Gao Feng <gfree.wind@vip.163.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Baruch Siach authored
The generic PHY 'phys' property sometime appears in the same node with the Ethernet PHY 'phy' or 'phy-handle' properties. Add a warning in phy-bindings.txt to reduce confusion. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 06 Sep, 2017 15 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
Pull crypto updates from Herbert Xu: "Here is the crypto update for 4.14: API: - Defer scompress scratch buffer allocation to first use. - Add __crypto_xor that takes separte src and dst operands. - Add ahash multiple registration interface. - Revamped aead/skcipher algif code to fix async IO properly. Drivers: - Add non-SIMD fallback code path on ARM for SVE. - Add AMD Security Processor framework for ccp. - Add support for RSA in ccp. - Add XTS-AES-256 support for CCP version 5. - Add support for PRNG in sun4i-ss. - Add support for DPAA2 in caam. - Add ARTPEC crypto support. - Add Freescale RNGC hwrng support. - Add Microchip / Atmel ECC driver. - Add support for STM32 HASH module" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (116 commits) crypto: af_alg - get_page upon reassignment to TX SGL crypto: cavium/nitrox - Fix an error handling path in 'nitrox_probe()' crypto: inside-secure - fix an error handling path in safexcel_probe() crypto: rockchip - Don't dequeue the request when device is busy crypto: cavium - add release_firmware to all return case crypto: sahara - constify platform_device_id MAINTAINERS: Add ARTPEC crypto maintainer crypto: axis - add ARTPEC-6/7 crypto accelerator driver crypto: hash - add crypto_(un)register_ahashes() dt-bindings: crypto: add ARTPEC crypto crypto: algif_aead - fix comment regarding memory layout crypto: ccp - use dma_mapping_error to check map error lib/mpi: fix build with clang crypto: sahara - Remove leftover from previous used spinlock crypto: sahara - Fix dma unmap direction crypto: af_alg - consolidation of duplicate code crypto: caam - Remove unused dentry members crypto: ccp - select CONFIG_CRYPTO_RSA crypto: ccp - avoid uninitialized variable warning crypto: serpent - improve __serpent_setkey with UBSAN ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds authored
Pull networking updates from David Miller: 1) Support ipv6 checksum offload in sunvnet driver, from Shannon Nelson. 2) Move to RB-tree instead of custom AVL code in inetpeer, from Eric Dumazet. 3) Allow generic XDP to work on virtual devices, from John Fastabend. 4) Add bpf device maps and XDP_REDIRECT, which can be used to build arbitrary switching frameworks using XDP. From John Fastabend. 5) Remove UFO offloads from the tree, gave us little other than bugs. 6) Remove the IPSEC flow cache, from Florian Westphal. 7) Support ipv6 route offload in mlxsw driver. 8) Support VF representors in bnxt_en, from Sathya Perla. 9) Add support for forward error correction modes to ethtool, from Vidya Sagar Ravipati. 10) Add time filter for packet scheduler action dumping, from Jamal Hadi Salim. 11) Extend the zerocopy sendmsg() used by virtio and tap to regular sockets via MSG_ZEROCOPY. From Willem de Bruijn. 12) Significantly rework value tracking in the BPF verifier, from Edward Cree. 13) Add new jump instructions to eBPF, from Daniel Borkmann. 14) Rework rtnetlink plumbing so that operations can be run without taking the RTNL semaphore. From Florian Westphal. 15) Support XDP in tap driver, from Jason Wang. 16) Add 32-bit eBPF JIT for ARM, from Shubham Bansal. 17) Add Huawei hinic ethernet driver. 18) Allow to report MD5 keys in TCP inet_diag dumps, from Ivan Delalande. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1780 commits) i40e: point wb_desc at the nvm_wb_desc during i40e_read_nvm_aq i40e: avoid NVM acquire deadlock during NVM update drivers: net: xgene: Remove return statement from void function drivers: net: xgene: Configure tx/rx delay for ACPI drivers: net: xgene: Read tx/rx delay for ACPI rocker: fix kcalloc parameter order rds: Fix non-atomic operation on shared flag variable net: sched: don't use GFP_KERNEL under spin lock vhost_net: correctly check tx avail during rx busy polling net: mdio-mux: add mdio_mux parameter to mdio_mux_init() rxrpc: Make service connection lookup always check for retry net: stmmac: Delete dead code for MDIO registration gianfar: Fix Tx flow control deactivation cxgb4: Ignore MPS_TX_INT_CAUSE[Bubble] for T6 cxgb4: Fix pause frame count in t4_get_port_stats cxgb4: fix memory leak tun: rename generic_xdp to skb_xdp tun: reserve extra headroom only when XDP is set net: dsa: bcm_sf2: Configure IMP port TC2QOS mapping net: dsa: bcm_sf2: Advertise number of egress queues ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linuxLinus Torvalds authored
Pull writeback error handling updates from Jeff Layton: "This pile continues the work from last cycle on better tracking writeback errors. In v4.13 we added some basic errseq_t infrastructure and converted a few filesystems to use it. This set continues refining that infrastructure, adds documentation, and converts most of the other filesystems to use it. The main exception at this point is the NFS client" * tag 'wberr-v4.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux: ecryptfs: convert to file_write_and_wait in ->fsync mm: remove optimizations based on i_size in mapping writeback waits fs: convert a pile of fsync routines to errseq_t based reporting gfs2: convert to errseq_t based writeback error reporting for fsync fs: convert sync_file_range to use errseq_t based error-tracking mm: add file_fdatawait_range and file_write_and_wait fuse: convert to errseq_t based error tracking for fsync mm: consolidate dax / non-dax checks for writeback Documentation: add some docs for errseq_t errseq: rename __errseq_set to errseq_set
-
git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linuxLinus Torvalds authored
Pull file locking updates from Jeff Layton: "This pile just has a few file locking fixes from Ben Coddington. There are a couple of cleanup patches + an attempt to bring sanity to the l_pid value that is reported back to userland on an F_GETLK request. After a few gyrations, he came up with a way for filesystems to communicate to the VFS layer code whether the pid should be translated according to the namespace or presented as-is to userland" * tag 'locks-v4.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux: locks: restore a warn for leaked locks on close fs/locks: Remove fl_nspid and use fs-specific l_pid for remote locks fs/locks: Use allocation rather than the stack in fcntl_getlk()
-
git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlmLinus Torvalds authored
Pull dlm updates from David Teigland: "This set includes a bunch of minor code cleanups that have accumulated, probably from code analyzers people like to run. There is one nice fix that avoids some socket leaks by switching to use sock_create_lite()" * tag 'dlm-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm: dlm: use sock_create_lite inside tcp_accept_from_sock uapi linux/dlm_netlink.h: include linux/dlmconstants.h dlm: avoid double-free on error path in dlm_device_{register,unregister} dlm: constify kset_uevent_ops structure dlm: print log message when cluster name is not set dlm: Delete an unnecessary variable initialisation in dlm_ls_start() dlm: Improve a size determination in two functions dlm: Use kcalloc() in two functions dlm: Use kmalloc_array() in make_member_array() dlm: Delete an error message for a failed memory allocation in dlm_recover_waiters_pre() dlm: Improve a size determination in dlm_recover_waiters_pre() dlm: Use kcalloc() in dlm_scan_waiters() dlm: Improve a size determination in table_seq_start() dlm: Add spaces for better code readability dlm: Replace six seq_puts() calls by seq_putc() dlm: Make dismatch error message more clear dlm: Fix kernel memory disclosure
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext4 updates from Ted Ts'o: "Scalability improvements when allocating inodes, and some miscellaneous bug fixes and cleanups" * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: avoid Y2038 overflow in recently_deleted() ext4: fix fault handling when mounted with -o dax,ro ext4: fix quota inconsistency during orphan cleanup for read-only mounts ext4: fix incorrect quotaoff if the quota feature is enabled ext4: remove useless test and assignment in strtohash functions ext4: backward compatibility support for Lustre ea_inode implementation ext4: remove timebomb in ext4_decode_extra_time() ext4: use sizeof(*ptr) ext4: in ext4_seek_{hole,data}, return -ENXIO for negative offsets ext4: reduce lock contention in __ext4_new_inode ext4: cleanup goto next group ext4: do not unnecessarily allocate buffer in recently_deleted()
-
git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds authored
Pull XFS updates from Darrick Wong: "Here are the changes for xfs for 4.14. Most of these are cleanups and fixes for bad behavior, as we're mostly focusing on improving reliablity this cycle (read: there's potentially a lot of stuff on the horizon for 4.15 so better to spend a few weeks killing other bugs now). Summary: - Write unmount record for a ro mount to avoid unnecessary log replay - Clean up orphaned inodes when mounting fs readonly - Resubmit inode log items when buffer writeback fails to avoid umount hang - Fix log recovery corruption problems when log headers wrap around the end - Avoid infinite loop searching for free inodes when inode counters are wrong - Evict inodes involved with log redo so that we don't leak them later - Fix a potential race between reclaim and inode cluster freeing - Refactor the inode joining code w.r.t. transaction rolling & deferred ops - Fix a bug where the log doesn't properly deal with dirty buffers that are about to become ordered buffers - Fix the extent swap code to deal with making dirty buffers ordered properly - Consolidate page fault handlers - Refactor the incore extent manipulation functions to use the iext abstractions instead of directly modifying with extent data - Disable crashy chattr +/-x until we fix it - Don't allow us to set S_DAX for v2 inodes - Various cleanups - Clarify some documentation - Fix a problem where fsync and a log commit race to send the disk a flush command, resulting in a small window where power fail data loss could occur - Simplify some rmap operations in the fcollapse code - Fix some use-after-free problems in async writeback" * tag 'xfs-4.14-merge-7' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (44 commits) xfs: use kmem_free to free return value of kmem_zalloc xfs: open code end_buffer_async_write in xfs_finish_page_writeback xfs: don't set v3 xflags for v2 inodes xfs: fix compiler warnings fsmap: fix documentation of FMR_OF_LAST xfs: simplify the rmap code in xfs_bmse_merge xfs: remove unused flags arg from xfs_file_iomap_begin_delay xfs: fix incorrect log_flushed on fsync xfs: disable per-inode DAX flag xfs: replace xfs_qm_get_rtblks with a direct call to xfs_bmap_count_leaves xfs: rewrite xfs_bmap_count_leaves using xfs_iext_get_extent xfs: use xfs_iext_*_extent helpers in xfs_bmap_split_extent_at xfs: use xfs_iext_*_extent helpers in xfs_bmap_shift_extents xfs: move some code around inside xfs_bmap_shift_extents xfs: use xfs_iext_get_extent in xfs_bmap_first_unused xfs: switch xfs_bmap_local_to_extents to use xfs_iext_insert xfs: add a xfs_iext_update_extent helper xfs: consolidate the various page fault handlers iomap: return VM_FAULT_* codes from iomap_page_mkwrite xfs: relog dirty buffers during swapext bmbt owner change ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2Linus Torvalds authored
Pull GFS2 updates from Bob Peterson: "We've got a whopping 29 GFS2 patches for this merge window, mainly because we held some back from the previous merge window until we could get them perfected and well tested. We have a couple patch sets, including my patch set for protecting glock gl_object and Andreas Gruenbacher's patch set to fix the long-standing shrink- slab hang, plus a bunch of assorted bugs and cleanups. Summary: - I fixed a bug whereby an IO error would lead to a double-brelse. - Andreas Gruenbacher made a minor cleanup to call his relatively new function, gfs2_holder_initialized, rather than doing it manually. This was just missed by a previous patch set. - Jan Kara fixed a bug whereby the SGID was being cleared when inheriting ACLs. - Andreas found a bug and fixed it in his previous patch, "Get rid of flush_delayed_work in gfs2_evict_inode". A call to flush_delayed_work was deleted from *gfs2_inode_lookup and added to gfs2_create_inode. - Wang Xibo found and fixed a list_add call in inode_go_lock that specified the parameters in the wrong order. - Coly Li submitted a patch to add the REQ_PRIO to some of GFS2's metadata reads that were accidentally missing them. - I submitted a 4-patch set to protect the glock gl_object field. GFS2 was setting and checking gl_object with no locking mechanism, so the value was occasionally stomped on, which caused file system corruption. - I submitted a small cleanup to function gfs2_clear_rgrpd. It was needlessly adding rgrp glocks to the lru list, then pulling them back off immediately. The rgrp glocks don't use the lru list anyway, so doing so was just a waste of time. - I submitted a patch that checks the GLOF_LRU flag on a glock before trying to remove it from the lru_list. This avoids a lot of unnecessary spin_lock contention. - I submitted a patch to delete GFS2's debugfs files only after we evict all the glocks. Before this patch, GFS2 would delete the debugfs files, and if unmount hung waiting for a glock, there was no way to debug the problem. Now, if a hang occurs during umount, we can examine the debugfs files to figure out why it's hung. - Andreas Gruenbacher submitted a patch to fix some trivial typos. - Andreas also submitted a five-part patch set to fix the longstanding hang involving the slab shrinker: dlm requires memory, calls the inode shrinker, which calls gfs2's evict, which calls back into DLM before it can evict an inode. - Abhi Das submitted a patch to forcibly flush the active items list to relieve memory pressure. This fixes a long-standing bug whereby GFS2 was getting hung permanently in balance_dirty_pages. - Thomas Tai submitted a patch to fix a slab corruption problem due to a residual pointer left in the lock_dlm lockstruct. - I submitted a patch to withdraw the file system if IO errors are encountered while writing to the journals or statfs system file which were previously not being sent back up. Before, some IO errors were sometimes not be detected for several hours, and at recovery time, the journal errors made journal replay impossible. - Andreas has a patch to fix an annoying format-truncation compiler warning so GFS2 compiles cleanly. - I have a patch that fixes a handful of sparse compiler warnings. - Andreas fixed up an useless gl_object warning caused by an earlier patch. - Arvind Yadav added a patch to properly constify our rhashtable params declare. - I added a patch to fix a regression caused by the non-recursive delete and truncate patch that caused file system blocks to not be properly freed. - Ernesto A. Fernández added a patch to fix a place where GFS2 would send back the wrong return code setting extended attributes. - Ernesto also added a patch to fix a case in which GFS2 was improperly setting an inode's i_mode, potentially granting access to the wrong users" * tag 'gfs2-4.14.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: (29 commits) gfs2: preserve i_mode if __gfs2_set_acl() fails gfs2: don't return ENODATA in __gfs2_xattr_set unless replacing GFS2: Fix non-recursive truncate bug gfs2: constify rhashtable_params GFS2: Fix gl_object warnings GFS2: Fix up some sparse warnings gfs2: Silence gcc format-truncation warning GFS2: Withdraw for IO errors writing to the journal or statfs gfs2: fix slab corruption during mounting and umounting gfs file system gfs2: forcibly flush ail to relieve memory pressure gfs2: Clean up waiting on glocks gfs2: Defer deleting inodes under memory pressure gfs2: gfs2_evict_inode: Put glocks asynchronously gfs2: Get rid of gfs2_set_nlink gfs2: gfs2_glock_get: Wait on freeing glocks gfs2: Fix trivial typos GFS2: Delete debugfs files only after we evict the glocks GFS2: Don't waste time locking lru_lock for non-lru glocks GFS2: Don't bother trying to add rgrps to the lru list GFS2: Clear gl_object when deleting an inode in gfs2_delete_inode ...
-
Johannes Berg authored
When an RX BA session is started by the driver, and it has to tell mac80211 about it, the corresponding bit in tid_rx_manage_offl gets set and the BA session work is scheduled. Upon testing this bit, it will call __ieee80211_start_rx_ba_session(), thus deadlocking as it already holds the ampdu_mlme.mtx, which that acquires again. Fix this by adding ___ieee80211_start_rx_ba_session(), a version of the function that requires the mutex already held. Cc: stable@vger.kernel.org Fixes: 699cb58c ("mac80211: manage RX BA session offload without SKB queue") Reported-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
Ilan peer authored
Commit 7a7c0a64 ("mac80211: fix TX aggregation start/stop callback race") added a cancellation of the ampdu work after the loop that stopped the Tx and Rx BA sessions. However, in some cases, e.g., during HW reconfig, the low level driver might call mac80211 APIs to complete the stopping of the BA sessions, which would queue the ampdu work to handle the actual completion. This work needs to be performed as otherwise mac80211 data structures would not be properly synced. Fix this by checking if BA session STOP_CB bit is set after the BA session cancellation and properly clean the session. Signed-off-by: Ilan Peer <ilan.peer@intel.com> [Johannes: the work isn't flushed because that could do other things we don't want, and the locking situation isn't clear] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
Emmanuel Grumbach authored
Honor the NL80211_RRF_NO_HT40{MINUS,PLUS} flags in reg_process_ht_flags_channel. Not doing so leads can lead to a firmware assert in iwlwifi for example. Fixes: b0d7aa59 ("cfg80211: allow wiphy specific regdomain management") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queueDavid S. Miller authored
Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2017-09-05 This series contains fixes for i40e only. These two patches fix an issue where our nvmupdate tool does not work on RHEL 7.4 and newer kernels, in fact, the use of the nvmupdate tool on newer kernels can cause the cards to be non-functional unless these patches are applied. Anjali reworks the locking around accessing the NVM so that NVM acquire timeouts do not occur which was causing the failed firmware updates. Jake correctly updates the wb_desc when reading the NVM through the AdminQ. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
-
Jacob Keller authored
When introducing the functions to read the NVM through the AdminQ, we did not correctly mark the wb_desc. Fixes: 7073f46e ("i40e: Add AQ commands for NVM Update for X722", 2015-06-05) Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Anjali Singhai Jain authored
X722 devices use the AdminQ to access the NVM, and this requires taking the AdminQ lock. Because of this, we lock the AdminQ during i40e_read_nvm(), which is also called in places where the lock is already held, such as the firmware update path which wants to lock once and then unlock when finished after performing several tasks. Although this should have only affected X722 devices, commit 96a39aed ("i40e: Acquire NVM lock before reads on all devices", 2016-12-02) added locking for all NVM reads, regardless of device family. This resulted in us accidentally causing NVM acquire timeouts on all devices, causing failed firmware updates which left the eeprom in a corrupt state. Create unsafe non-locked variants of i40e_read_nvm_word and i40e_read_nvm_buffer, __i40e_read_nvm_word and __i40e_read_nvm_buffer respectively. These variants will not take the NVM lock and are expected to only be called in places where the NVM lock is already held if needed. Since the only caller of i40e_read_nvm_buffer() was in such a path, remove it entirely in favor of the unsafe version. If necessary we can always add it back in the future. Additionally, we now need to hold the NVM lock in i40e_validate_checksum because the call to i40e_calc_nvm_checksum now assumes that the NVM lock is held. We can further move the call to read I40E_SR_SW_CHECKSUM_WORD up a bit so that we do not need to acquire the NVM lock twice. This should resolve firmware updates and also fix potential raise that could have caused the driver to report an invalid NVM checksum upon driver load. Reported-by: Stefan Assmann <sassmann@kpanic.de> Fixes: 96a39aed ("i40e: Acquire NVM lock before reads on all devices", 2016-12-02) Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 05 Sep, 2017 12 commits
-
-
David S. Miller authored
Iyappan Subramanian says: ==================== drivers: net: xgene: Misc bug fixes This patch set fixes bugs related to handling the case for ACPI for, reading and programming tx/rx delay values. ==================== Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Iyappan Subramanian authored
commit 183db4 ("drivers: net: xgene: Correct probe sequence handling") changed the return type of xgene_enet_check_phy_handle() to void. This patch, removes the return statement from the last line. Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Quan Nguyen authored
This patch fixes configuring tx/rx delay values for ACPI. Signed-off-by: Quan Nguyen <qnguyen@apm.com> Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Iyappan Subramanian authored
This patch fixes reading tx/rx delay values for ACPI. Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Signed-off-by: Quan Nguyen <qnguyen@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Zahari Doychev authored
The function calls to kcalloc use wrong parameter order and incorrect flags values. GFP_KERNEL is used instead of flags now and the order is corrected. The change was done using the following coccinelle script: @@ expression E1,E2; type T; @@ -kcalloc(E1, E2, sizeof(T)) +kcalloc(E2, sizeof(T), GFP_KERNEL) Signed-off-by: Zahari Doychev <zahari.doychev@linux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Håkon Bugge authored
The bits in m_flags in struct rds_message are used for a plurality of reasons, and from different contexts. To avoid any missing updates to m_flags, use the atomic set_bit() instead of the non-atomic equivalent. Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com> Reviewed-by: Knut Omang <knut.omang@oracle.com> Reviewed-by: Wei Lin Guay <wei.lin.guay@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
The new TC IDR code uses GFP_KERNEL under spin lock. Which leads to: [ 582.621091] BUG: sleeping function called from invalid context at ../mm/slab.h:416 [ 582.629721] in_atomic(): 1, irqs_disabled(): 0, pid: 3379, name: tc [ 582.636939] 2 locks held by tc/3379: [ 582.641049] #0: (rtnl_mutex){+.+.+.}, at: [<ffffffff910354ce>] rtnetlink_rcv_msg+0x92e/0x1400 [ 582.650958] #1: (&(&tn->idrinfo->lock)->rlock){+.-.+.}, at: [<ffffffff9110a5e0>] tcf_idr_create+0x2f0/0x8e0 [ 582.662217] Preemption disabled at: [ 582.662222] [<ffffffff9110a5e0>] tcf_idr_create+0x2f0/0x8e0 [ 582.672592] CPU: 9 PID: 3379 Comm: tc Tainted: G W 4.13.0-rc7-debug-00648-g43503a79b9f0 #287 [ 582.683432] Hardware name: Dell Inc. PowerEdge R730/072T6D, BIOS 2.3.4 11/08/2016 [ 582.691937] Call Trace: ... [ 582.742460] kmem_cache_alloc+0x286/0x540 [ 582.747055] radix_tree_node_alloc.constprop.6+0x4a/0x450 [ 582.753209] idr_get_free_cmn+0x627/0xf80 ... [ 582.815525] idr_alloc_cmn+0x1a8/0x270 ... [ 582.833804] tcf_idr_create+0x31b/0x8e0 ... Try to preallocate the memory with idr_prealloc(GFP_KERNEL) (as suggested by Eric Dumazet), and change the allocation flags under spin lock. Fixes: 65a206c0 ("net/sched: Change act_api and act_xxx modules to use IDR") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jason Wang authored
We check tx avail through vhost_enable_notify() in the past which is wrong since it only checks whether or not guest has filled more available buffer since last avail idx synchronization which was just done by vhost_vq_avail_empty() before. What we really want is checking pending buffers in the avail ring. Fix this by calling vhost_vq_avail_empty() instead. This issue could be noticed by doing netperf TCP_RR benchmark as client from guest (but not host). With this fix, TCP_RR from guest to localhost restores from 1375.91 trans per sec to 55235.28 trans per sec on my laptop (Intel(R) Core(TM) i7-5600U CPU @ 2.60GHz). Fixes: 03088137 ("vhost_net: basic polling support") Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Corentin Labbe authored
mdio_mux_init() use the parameter dev for two distinct thing: 1) Have a device for all devm_ functions 2) Get device_node from it Since it is two distinct purpose, this patch add a parameter mdio_mux that is linked to task 2. This will also permit to register an of_node mdio-mux that lacks a direct owning device. For example a mdio-mux which is a subnode of a real device. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Howells authored
When an RxRPC service packet comes in, the target connection is looked up by an rb-tree search under RCU and a read-locked seqlock; the seqlock retry check is, however, currently skipped if we got a match, but probably shouldn't be in case the connection we found gets replaced whilst we're doing a search. Make the lookup procedure always go through need_seqretry(), even if the lookup was successful. This makes sure we always pick up on a write-lock event. On the other hand, since we don't take a ref on the object, but rely on RCU to prevent its destruction after dropping the seqlock, I'm not sure this is necessary. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Romain Perier authored
This code is no longer used, the logging function was changed by commit fbca1647 ("net: stmmac: Use the right logging function in stmmac_mdio_register"). It was previously showing information about the type of the IRQ, if it's polled, ignored or a normal interrupt. As we don't want information loss, I have moved this code to phy_attached_print(). Fixes: fbca1647 ("net: stmmac: Use the right logging function in stmmac_mdio_register") Signed-off-by: Romain Perier <romain.perier@collabora.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Claudiu Manoil authored
The wrong register is checked for the Tx flow control bit, it should have been maccfg1 not maccfg2. This went unnoticed for so long probably because the impact is hardly visible, not to mention the tangled code from adjust_link(). First, link flow control (i.e. handling of Rx/Tx link level pause frames) is disabled by default (needs to be enabled via 'ethtool -A'). Secondly, maccfg2 always returns 0 for tx_flow_oldval (except for a few old boards), which results in Tx flow control remaining always on once activated. Fixes: 45b679c9 ("gianfar: Implement PAUSE frame generation support") Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-