* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  RDMA/nes: Fix hang with modified FIN handling on A0 cards
  RDMA/nes: Change state to closing after FIN
  RDMA/nes: Fix double CLOSE event indication crash
  RDMA/nes: Write correct register write to set TX pause param
  RDMA/cxgb3: Don't exceed the max HW CQ depth

* 'fixes' of git://oss.oracle.com/git/tma/linux-2.6:
  ocfs2: Fix orphan add in ocfs2_create_inode_in_orphan
  ocfs2: split out ocfs2_prepare_orphan_dir() into locking and prep functions
  ocfs2: allow return of new inode block location before allocation of the inode
  ocfs2: use ocfs2_alloc_dinode_update_counts() instead of open coding
  ocfs2: split out inode alloc code from ocfs2_mknod_locked
  Ocfs2: Fix a regression bug from mainline commit(6b933c8e).
  ocfs2: Fix deadlock when allocating page
  ocfs2: properly set and use inode group alloc hint
  ocfs2: Use the right group in nfs sync check.
  ocfs2: Flush drive's caches on fdatasync
  ocfs2: make __ocfs2_page_mkwrite handle file end properly.
  ocfs2: Fix incorrect checksum validation error
  ocfs2: Fix metaecc error messages

Changing state to CLOSING when FIN is received causes A0 cards to
hang.  Fix this by checking for A0 cards in FIN handling.
Signed-off-by: Faisal Latif <faisal.latif@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

When the driver receives an AE for FIN received, it closes the
connection without changing the state of the connection in the
hardware to closing.  By changing the state to closing, hardware will
do a normal close sequence.
Signed-off-by: Faisal Latif <faisal.latif@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

During a stress testing in a large cluster, multiple close event are
detected and BUG() is hit in the iWARP core.  The cause is that the
active node gave up while waiting for an MPA response from the peer
and tried to close the connection by sending RST.  The passive node
driver receives the RST but is waiting for MPA response from the user.
When the MPA accept is received, the driver offloads the connection
and sends a CLOSE event.  The driver gets an AE indicating RESET
received and also sends a CLOSE event, hitting a BUG().

Fix this by correcting RESET handling and sending CLOSE events.
Signed-off-by: Faisal Latif <faisal.latif@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Setting TX pause param writes to the wrong register location causing
the adapter to hang.  Correct the define used to write the reigster.

Addresses: https://bugs.openfabrics.org/show_bug.cgi?id=2116Reported-by: Shiri Franchi <shirif@voltaire.com>
Signed-off-by: Chien Tung <chien.tin.tung@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: i8042 - fix device removal on unload
  Input: bcm5974 - adjust major/minor to scale
  Input: MT - initialize slots to unused
  Input: use PIT_TICK_RATE in vt beep ioctl
  Input: wacom - fix mousewheel handling for old wacom tablets

Merge branch 'semaphore-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'semaphore-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  semaphore: Add DEFINE_SEMAPHORE

Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, mcheck: Avoid duplicate sysfs links/files for thresholding banks
  io-mapping: Fix the address space annotations
  x86: Fix the address space annotations of iomap_atomic_prot_pfn()
  x86, mm: Fix CONFIG_VMSPLIT_1G and 2G_OPT trampoline
  x86, hwmon: Fix unsafe smp_processor_id() in thermal_throttle_add_dev

Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  gcc-4.6: kernel/*: Fix unused but set warnings
  mutex: Fix annotations to include it in kernel-locking docbook
  pid: make setpgid() system call use RCU read-side critical section
  MAINTAINERS: Add RCU's public git tree

Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf, x86: Try to handle unknown nmis with an enabled PMU
  perf, x86: Fix handle_irq return values
  perf, x86: Fix accidentally ack'ing a second event on intel perf counter
  oprofile, x86: fix init_sysfs() function stub
  lockup_detector: Sync touch_*_watchdog back to old semantics
  tracing: Fix a race in function profile
  oprofile, x86: fix init_sysfs error handling
  perf_events: Fix time tracking for events with pid != -1 and cpu != -1
  perf: Initialize callchains roots's childen hits
  oprofile: fix crash when accessing freed task structs

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: fix lock annotations
  fuse: flush background queue on connection close

The full cleanup of init_MUTEX[_LOCKED] and DECLARE_MUTEX has not been
done. Some of the users are real semaphores and we should name them as
such instead of confusing everyone with "MUTEX".

Provide the infrastructure to get finally rid of init_MUTEX[_LOCKED]
and DECLARE_MUTEX.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Christoph Hellwig <hch@infradead.org>
LKML-Reference: <20100907125054.795929962@linutronix.de>

ocfs2_create_inode_in_orphan() is used by reflink to create the newly
reflinked inode simultaneously in the orphan dir. This allows us to easily
handle partially-reflinked files during recovery cleanup.

We have a problem though - the orphan dir stringifies inode # to determine
a unique name under which the orphan entry dirent can be created. Since
ocfs2_create_inode_in_orphan() needs the space allocated in the orphan dir
before it can allocate the inode, we currently call into the orphan code:

       /*
        * We give the orphan dir the root blkno to fake an orphan name,
        * and allocate enough space for our insertion.
        */
       status = ocfs2_prepare_orphan_dir(osb, &orphan_dir,
                                         osb->root_blkno,
                                         orphan_name, &orphan_insert);

Using osb->root_blkno might work fine on unindexed directories, but the
orphan dir can have an index.  When it has that index, the above code fails
to allocate the proper index entry.  Later, when we try to remove the file
from the orphan dir (using the actual inode #), the reflink operation will
fail.

To fix this, I created a function ocfs2_alloc_orphaned_file() which uses the
newly split out orphan and inode alloc code to figure out what the inode
block number will be (once allocated) and then prepare the orphan dir from
that data.
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Tao Ma <tao.ma@oracle.com>

We do this because ocfs2_create_inode_in_orphan() wants to order locking of
the orphan dir with respect to locking of the inode allocator *before*
making any changes to the directory.
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Tao Ma <tao.ma@oracle.com>

This allows code which needs to know the eventual block number of an inode
but can't allocate it yet due to transaction or lock ordering. For example,
ocfs2_create_inode_in_orphan() currently gives a junk blkno for preparation
of the orphan dir because it can't yet know where the actual inode is placed
- that code is actually in ocfs2_mknod_locked. This is a problem when the
orphan dirs are indexed as the junk inode number will create an index entry
which goes unused (and fails the later removal from the orphan dir).  Now
with these interfaces, ocfs2_create_inode_in_orphan() can run the block
group search (and get back the inode block number) *before* any actual
allocation occurs.
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Tao Ma <tao.ma@oracle.com>

ocfs2_search_chain() makes the same updates as
ocfs2_alloc_dinode_update_counts to the alloc inode. Instead of open coding
the bitmap update, use our helper function.
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Tao Ma <tao.ma@oracle.com>

Do this by splitting the bulk of the function away from the inode allocation
code at the very tom of ocfs2_mknod_locked(). Existing callers don't need to
change and won't see any difference. The new function created,
__ocfs2_mknod_locked() will be used shortly.
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Tao Ma <tao.ma@oracle.com>

The patch is to fix the regression bug brought from commit 6b933c8e...( 'ocfs2:
Avoid direct write if we fall back to buffered I/O'):

http://oss.oracle.com/bugzilla/show_bug.cgi?id=1285

The commit 6b933c8e changed __generic_file_aio_write
to generic_file_buffered_write, which didn't call filemap_{write,wait}_range to  flush
the pagecaches when we were falling O_DIRECT writes back to buffered ones. it did hurt
the O_DIRECT semantics somehow in extented odirect writes.

This patch tries to guarantee O_DIRECT writes of 'fall back to buffered' to be correctly
flushed.
Signed-off-by: Tristan Ye <tristan.ye@oracle.com>
Signed-off-by: Tao Ma <tao.ma@oracle.com>

We cannot call grab_cache_page() when holding filesystem locks or with
a transaction started as grab_cache_page() calls page allocation with
GFP_KERNEL flag and thus page reclaim can recurse back into the filesystem
causing deadlocks or various assertion failures. We have to use
find_or_create_page() instead and pass it GFP_NOFS as we do with other
allocations.
Acked-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Tao Ma <tao.ma@oracle.com>

We were setting ac->ac_last_group in ocfs2_claim_suballoc_bits from
res->sr_bg_blkno.  Unfortunately, res->sr_bg_blkno is going to be zero under
normal (non-fragmented) circumstances. The discontig block group patches
effectively turned off that feature. Fix this by correctly calculating what
the next group hint should be.
Acked-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Tested-by: Goldwyn Rodrigues <rgoldwyn@suse.de>
Signed-off-by: Tao Ma <tao.ma@oracle.com>

We have added discontig block group now, and now an inode
can be allocated in an discontig block group. So get
it in ocfs2_get_suballoc_slot_bit.

The old ocfs2_test_suballoc_bit gets group block no
from the allocation inode which is wrong. Fix it by
passing the right group.
Acked-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Tao Ma <tao.ma@oracle.com>

When 'barrier' mount option is specified, we have to issue a cache flush
during fdatasync(2). We have to do this even if inode doesn't have
I_DIRTY_DATASYNC set because we still have to get written *data* to disk so
that they are not lost in case of crash.
Acked-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Singed-off-by: Tao Ma <tao.ma@oracle.com>

__ocfs2_page_mkwrite now is broken in handling file end.
1. the last page should be the page contains i_size - 1.
2. the len in the last page is also calculated wrong.
So change them accordingly.
Acked-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Tao Ma <tao.ma@oracle.com>

For local mounts, ocfs2_read_locked_inode() calls ocfs2_read_blocks_sync() to
read the inode off the disk. The latter first checks to see if that block is
cached in the journal, and, if so, returns that block. That is ok.

But ocfs2_read_locked_inode() goes wrong when it tries to validate the checksum
of such blocks. Blocks that are cached in the journal may not have had their
checksum computed as yet. We should not validate the checksums of such blocks.

Fixes ossbz#1282
http://oss.oracle.com/bugzilla/show_bug.cgi?id=1282Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Cc: stable@kernel.org
Singed-off-by: Tao Ma <tao.ma@oracle.com>

Like tools, the checksum validate function now prints the values in hex.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Singed-off-by: Tao Ma <tao.ma@oracle.com>

* 'for-2.6.36' of git://linux-nfs.org/~bfields/linux:
  nfsd4: mask out non-access bits in nfs4_access_to_omode

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
  ima: always maintain counters
  AppArmor: Fix locking from removal of profile namespace
  AppArmor: Fix splitting an fqname into separate namespace and profile names
  AppArmor: Fix security_task_setrlimit logic for 2.6.36 changes
  AppArmor: Drop hack to remove appended " (deleted)" string

commit 8262bb85da allocated the inode integrity struct (iint) before any
inodes were created. Only after IMA was initialized in late_initcall were
the counters updated. This patch updates the counters, whether or not IMA
has been initialized, to resolve 'imbalance' messages.

This patch fixes the bug as reported in bugzilla: 15673.  When the i915
is builtin, the ring_buffer is initialized before IMA, causing the
imbalance message on suspend.
Reported-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Tested-by: Thomas Meyer <thomas@m3y3r.de>
Tested-by: David Safford<safford@watson.ibm.com>
Cc: Stable Kernel <stable@kernel.org>
Signed-off-by: James Morris <jmorris@namei.org>

The locking for profile namespace removal is wrong, when removing a
profile namespace, it needs to be removed from its parent's list.
Lock the parent of namespace list instead of the namespace being removed.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: James Morris <jmorris@namei.org>

As per Dan Carpenter <error27@gmail.com>
  If we have a ns name without a following profile then in the original
  code it did "*ns_name = &name[1];".  "name" is NULL so "*ns_name" is
  0x1.  That isn't useful and could cause an oops when this function is
  called from aa_remove_profiles().

Beyond this the assignment of the namespace name was wrong in the case
where the profile name was provided as it was being set to &name[1]
after name  = skip_spaces(split + 1);

Move the ns_name assignment before updating name for the split and
also add skip_spaces, making the interface more robust.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: James Morris <jmorris@namei.org>

2.6.36 introduced the abilitiy to specify the task that is having its
rlimits set.  Update mediation to ensure that confined tasks can only
set their own group_leader as expected by current policy.

Add TODO note about extending policy to support setting other tasks
rlimits.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: James Morris <jmorris@namei.org>

The 2.6.36 kernel has refactored __d_path() so that it no longer appends
" (deleted)" to unlinked paths.  So drop the hack that was used to detect
and remove the appended string.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: James Morris <jmorris@namei.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
  PCI: bus speed strings should be const
  PCI hotplug: Fix build with CONFIG_ACPI unset
  PCI: PCIe: Remove the port driver module exit routine
  PCI: PCIe: Move PCIe PME code to the pcie directory
  PCI: PCIe: Disable PCIe port services during port initialization
  PCI: PCIe: Ask BIOS for control of all native services at once
  ACPI/PCI: Negotiate _OSC control bits before requesting them
  ACPI/PCI: Do not preserve _OSC control bits returned by a query
  ACPI/PCI: Make acpi_pci_query_osc() return control bits
  ACPI/PCI: Reorder checks in acpi_pci_osc_control_set()
  PCI: PCIe: Introduce commad line switch for disabling port services
  PCI: PCIe AER: Introduce pci_aer_available()
  x86/PCI: only define pci_domain_nr if PCI and PCI_DOMAINS are set
  PCI: provide stub pci_domain_nr function for !CONFIG_PCI configs

* 'for-linus' of git://oss.sgi.com/xfs/xfs:
  xfs: Make fiemap work with sparse files
  xfs: prevent 32bit overflow in space reservation
  xfs: Disallow 32bit project quota id
  xfs: improve buffer cache hash scalability

* 'for-linus' of git://android.kernel.org/kernel/tegra:
  [ARM] tegra: Add ZRELADDR default for ARCH_TEGRA

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha-2.6:
  alpha: Fix printk format errors
  alpha: convert perf_event to use local_t
  Fix call to replaced SuperIO functions
  alpha: remove homegrown L1_CACHE_ALIGN macro

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
  9p: potential ERR_PTR() dereference

* 'for-linus' of git://neil.brown.name/md:
  md: resolve confusion of MD_CHANGE_CLEAN
  md: don't clear MD_CHANGE_CLEAN in md_update_sb() for external arrays
  Move .gitignore from drivers/md to lib/raid6