sctp_hdr(skb) only works when skb->transport_header is set properly.

But in Netfilter, skb->transport_header for ipv6 is not guaranteed
to be right value for sctphdr. It would cause to fail to check the
checksum for sctp packets.

So fix it by using offset, which is always right in all places.

v1->v2:
  - Fix the changelog.

Fixes: e6d8b64b ("net: sctp: fix and consolidate SCTP checksumming code")
Reported-by: Li Shuang <shuali@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

I am using "protocol ip" filters in TC to manipulate TC flower
classifiers, which are only available with "protocol ip". However,
I faced an issue that packets sent via raw sockets with ETH_P_ALL
did not match the ip filters even if they did satisfy the condition
(e.g., DHCP offer from dhcpd).

I have determined that the behavior was caused by an unexpected
value stored in skb->protocol, namely, ETH_P_ALL instead of ETH_P_IP,
when packets were sent via raw sockets with ETH_P_ALL set.

IMHO, storing ETH_P_ALL in skb->protocol is not appropriate for
packets sent via raw sockets because ETH_P_ALL is not a real ether
type used on wire, but a virtual one.

This patch fixes the tx protocol selection in cases of transmission
via raw sockets created with ETH_P_ALL so that it asks the driver to
extract protocol from the Ethernet header.

Fixes: 75c65772 ("net/packet: Ask driver for protocol if not provided by user")
Signed-off-by: Yoshiki Komachi <komachi.yoshiki@lab.ntt.co.jp>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When using fanouts with AF_PACKET, the demux functions such as
fanout_demux_cpu will return an index in the fanout socket array, which
corresponds to the selected socket.

The ordering of this array depends on the order the sockets were added
to a given fanout group, so for FANOUT_CPU this means sockets are bound
to cpus in the order they are configured, which is OK.

However, when stopping then restarting the interface these sockets are
bound to, the sockets are reassigned to the fanout group in the reverse
order, due to the fact that they were inserted at the head of the
interface's AF_PACKET socket list.

This means that traffic that was directed to the first socket in the
fanout group is now directed to the last one after an interface restart.

In the case of FANOUT_CPU, traffic from CPU0 will be directed to the
socket that used to receive traffic from the last CPU after an interface
restart.

This commit introduces a helper to add a socket at the tail of a list,
then uses it to register AF_PACKET sockets.

Note that this changes the order in which sockets are listed in /proc and
with sock_diag.

Fixes: dc99f600 ("packet: Add fanout support")
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit ad6c9986 ("vxlan: Fix GRO cells race condition between
receive and link delete") fixed a race condition for the typical case a vxlan
device is dismantled from the current netns. But if a netns is dismantled,
vxlan_destroy_tunnels() is called to schedule a unregister_netdevice_queue()
of all the vxlan tunnels that are related to this netns.

In vxlan_destroy_tunnels(), gro_cells_destroy() is called and finished before
unregister_netdevice_queue(). This means that the gro_cells_destroy() call is
done too soon, for the same reasons explained in above commit.

So we need to fully respect the RCU rules, and thus must remove the
gro_cells_destroy() call or risk use after-free.

Fixes: 58ce31cc ("vxlan: GRO support at tunnel layer")
Signed-off-by: Suanming.Mou <mousuanming@huawei.com>
Suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: Zhiqiang Liu <liuzhiqiang26@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

TCP/UDP checksum validity was propagated to skb
only if IP checksum is valid.
But for IPv6 there is no validity as there is no checksum in IPv6.
This patch propagates TCP/UDP checksum validity regardless of IP checksum.

Fixes: 018423e9 ("net: ethernet: aquantia: Add ring support code")
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Nikita Danilov <nikita.danilov@aquantia.com>
Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The bug that Stan reported is as follows. After a restart, a 16-bit NIC
may be incorrectly identified as a 32-bit NIC and stop working.

mac8390 slot.E: Memory length resource not found, probing
mac8390 slot.E: Farallon EtherMac II-C (type farallon)
mac8390 slot.E: MAC 00:00:c5:30:c2:99, IRQ 61, 32 KB shared memory at 0xfeed0000, 32-bit access.

The bug never arises after a cold start and only intermittently after a
warm start. (I didn't investigate why the bug is intermittent.)

It turns out that memcpy_toio() is deprecated and memcmp_withio() also
has issues. Replacing these calls with mmio accessors fixes the problem.
Reported-and-tested-by: Stan Johnson <userm57@yahoo.com>
Fixes: 2964db0f ("m68k: Mac DP8390 update")
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

Similarly to commit a7603ac1 ("geneve: change NET_UDP_TUNNEL
dependency to select"), GTP has a dependency on NET_UDP_TUNNEL which
makes impossible to compile it if no other protocol depending on
NET_UDP_TUNNEL is selected.

Fix this by changing the depends to a select, and drop NET_IP_TUNNEL from
the select list, as it already depends on NET_UDP_TUNNEL.
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

rose_write_internal() uses a temp buffer of 100 bytes, but a manual
inspection showed that given arbitrary input, rose_create_facilities()
can fill up to 110 bytes.

Lets use a tailroom of 256 bytes for peace of mind, and remove
the bounce buffer : we can simply allocate a big enough skb
and adjust its length as needed.

syzbot report :

BUG: KASAN: stack-out-of-bounds in memcpy include/linux/string.h:352 [inline]
BUG: KASAN: stack-out-of-bounds in rose_create_facilities net/rose/rose_subr.c:521 [inline]
BUG: KASAN: stack-out-of-bounds in rose_write_internal+0x597/0x15d0 net/rose/rose_subr.c:116
Write of size 7 at addr ffff88808b1ffbef by task syz-executor.0/24854

CPU: 0 PID: 24854 Comm: syz-executor.0 Not tainted 5.0.0+ #97
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x172/0x1f0 lib/dump_stack.c:113
 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187
 kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317
 check_memory_region_inline mm/kasan/generic.c:185 [inline]
 check_memory_region+0x123/0x190 mm/kasan/generic.c:191
 memcpy+0x38/0x50 mm/kasan/common.c:131
 memcpy include/linux/string.h:352 [inline]
 rose_create_facilities net/rose/rose_subr.c:521 [inline]
 rose_write_internal+0x597/0x15d0 net/rose/rose_subr.c:116
 rose_connect+0x7cb/0x1510 net/rose/af_rose.c:826
 __sys_connect+0x266/0x330 net/socket.c:1685
 __do_sys_connect net/socket.c:1696 [inline]
 __se_sys_connect net/socket.c:1693 [inline]
 __x64_sys_connect+0x73/0xb0 net/socket.c:1693
 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x458079
Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f47b8d9dc78 EFLAGS: 00000246 ORIG_RAX: 000000000000002a
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000458079
RDX: 000000000000001c RSI: 0000000020000040 RDI: 0000000000000004
RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f47b8d9e6d4
R13: 00000000004be4a4 R14: 00000000004ceca8 R15: 00000000ffffffff

The buggy address belongs to the page:
page:ffffea00022c7fc0 count:0 mapcount:0 mapping:0000000000000000 index:0x0
flags: 0x1fffc0000000000()
raw: 01fffc0000000000 0000000000000000 ffffffff022c0101 0000000000000000
raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff88808b1ffa80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 ffff88808b1ffb00: 00 00 00 00 00 00 00 00 f1 f1 f1 f1 00 00 00 03
>ffff88808b1ffb80: f2 f2 00 00 00 00 00 00 00 00 00 00 00 00 04 f3
                                                             ^
 ffff88808b1ffc00: f3 f3 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00
 ffff88808b1ffc80: 00 00 00 00 00 00 00 f1 f1 f1 f1 f1 f1 01 f2 01
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use https and link to the patch directly.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We move the check that prevents connecting service ranges to after
the RDM/DGRAM check, and move address sanity control to a separate
function that also validates the service range.

Fixes: 23998835 ("tipc: improve address sanity check in tipc_connect()")
Signed-off-by: Erik Hugne <erik.hugne@gmail.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix documentation markup warnings in snmp_counter.rst:

Documentation/networking/snmp_counter.rst:416: WARNING: Title underline too short.
Documentation/networking/snmp_counter.rst:684: WARNING: Bullet list ends without a blank line; unexpected unindent.
Documentation/networking/snmp_counter.rst:693: WARNING: Title underline too short.
Documentation/networking/snmp_counter.rst:707: WARNING: Bullet list ends without a blank line; unexpected unindent.
Documentation/networking/snmp_counter.rst:712: WARNING: Bullet list ends without a blank line; unexpected unindent.
Documentation/networking/snmp_counter.rst:722: WARNING: Title underline too short.
Documentation/networking/snmp_counter.rst:733: WARNING: Bullet list ends without a blank line; unexpected unindent.
Documentation/networking/snmp_counter.rst:736: WARNING: Bullet list ends without a blank line; unexpected unindent.
Documentation/networking/snmp_counter.rst:739: WARNING: Bullet list ends without a blank line; unexpected unindent.

Fixes: 80cc4950 ("net: Add part of TCP counts explanations in snmp_counters.rst")
Fixes: 8e2ea53a ("add snmp counters document")
Fixes: a6c7c7aa ("net: add document for several snmp counters")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: yupeng <yupeng0921@gmail.com>

nla_nest_start may fail. The fix check its status and returns
-EMSGSIZE in case it fails.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>

In my latest patch I missed one rcu_read_unlock(), in case
device is down.

Fixes: 4477138f ("tun: properly test for IFF_UP")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Daniel Borkmann says:

====================
pull-request: bpf 2019-03-16

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) Fix a umem memory leak on cleanup in AF_XDP, from Björn.

2) Fix BTF to properly resolve forward-declared enums into their corresponding
   full enum definition types during deduplication, from Andrii.

3) Fix libbpf to reject invalid flags in xsk_socket__create(), from Magnus.

4) Fix accessing invalid pointer returned from bpf_tcp_sock() and
   bpf_sk_fullsock() after bpf_sk_release() was called, from Martin.

5) Fix generation of load/store DW instructions in PPC JIT, from Naveen.

6) Various fixes in BPF helper function documentation in bpf.h UAPI header
   used to bpf-helpers(7) man page, from Quentin.

7) Fix segfault in BPF test_progs when prog loading failed, from Yonghong.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

nla_nest_start could fail and requires a check. The fix returns
-EMSGSIZE if it fails.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>

nla_nest_start may fail and thus deserves a check.

The fix returns -EMSGSIZE in case it fails.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>

nla_nest_start may fail and thus deserves a check.
The fix returns -EMSGSIZE when it fails.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>

upcall is dereferenced even when genlmsg_put fails. The fix
goto out to avoid the NULL pointer dereference in this case.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>

Yauheni Kaliuta pointed out that PTR_TO_STACK store/load verifier test
was failing on powerpc64 BE, and rightfully indicated that the PPC_LD()
macro is not masking away the last two bits of the offset per the ISA,
resulting in the generation of 'lwa' instruction instead of the intended
'ld' instruction.

Segher also pointed out that we can't simply mask away the last two bits
as that will result in loading/storing from/to a memory location that
was not intended.

This patch addresses this by using ldx/stdx if the offset is not
word-aligned. We load the offset into a temporary register (TMP_REG_2)
and use that as the index register in a subsequent ldx/stdx. We fix
PPC_LD() macro to mask off the last two bits, but enhance PPC_BPF_LL()
and PPC_BPF_STL() to factor in the offset value and generate the proper
instruction sequence. We also convert all existing users of PPC_LD() and
PPC_STD() to use these macros. All existing uses of these macros have
been audited to ensure that TMP_REG_2 can be clobbered.

Fixes: 156d0e29 ("powerpc/ebpf/jit: Implement JIT compiler for extended BPF")
Cc: stable@vger.kernel.org # v4.9+
Reported-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

When the umem is cleaned up, the task that created it might already be
gone. If the task was gone, the xdp_umem_release function did not free
the pages member of struct xdp_umem.

It turned out that the task lookup was not needed at all; The code was
a left-over when we moved from task accounting to user accounting [1].

This patch fixes the memory leak by removing the task lookup logic
completely.

[1] https://lore.kernel.org/netdev/20180131135356.19134-3-bjorn.topel@gmail.com/

Link: https://lore.kernel.org/netdev/c1cb2ca8-6a14-3980-8672-f3de0bb38dfd@suse.cz/
Fixes: c0c77d8f ("xsk: add user memory registration support sockopt")
Reported-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Same reasons than the ones explained in commit 4179cb5a
("vxlan: test dev->flags & IFF_UP before calling netif_rx()")

netif_rx_ni() or napi_gro_frags() must be called under a strict contract.

At device dismantle phase, core networking clears IFF_UP
and flush_all_backlogs() is called after rcu grace period
to make sure no incoming packet might be in a cpu backlog
and still referencing the device.

A similar protocol is used for gro layer.

Most drivers call netif_rx() from their interrupt handler,
and since the interrupts are disabled at device dismantle,
netif_rx() does not have to check dev->flags & IFF_UP

Virtual drivers do not have this guarantee, and must
therefore make the check themselves.

Fixes: 1bd4978a ("tun: honor IFF_UP in tun_get_user()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If an interrupt is already pending when the interrupt is enabled on the
GXL phy, no IRQ will ever be triggered.

The fix is simply to make sure pending IRQs are cleared before setting
up the irq mask.

Fixes: cf127ff2 ("net: phy: meson-gxl: add interrupt support")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Adds missing sphinx documentation to the
socket.c's functions. Also fixes some whitespaces.

I also changed the style of older documentation as an
effort to have an uniform documentation style.
Signed-off-by: Pedro Tammela <pctammela@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In case create_singlethread_workqueue fails, the check returns
an error to callers to avoid potential NULL pointer dereferences.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>

There are several statements that contain extra spacing in
the indentation; clean this up by removing spaces. Also
add { } braces on if statement to keep to kernel coding
style.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is a statement that is indented incorrectly; replace
spaces with a tab.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We initially interpreted the fwmark parameter as a flag that simply turned
on the feature, using the whole skb->mark field as the index into the CAKE
tin_order array. However, it is quite common for different applications to
use different parts of the mask field for their own purposes, each using a
different mask.

Support this use of subsets of the mark by interpreting the TCA_CAKE_FWMARK
parameter as a bitmask to apply to the fwmark field when reading it. The
result will be right-shifted by the number of unset lower bits of the mask
before looking up the tin.

In the original commit message we also failed to credit Felix Resch with
originally suggesting the fwmark feature back in 2017; so the Suggested-By
in this commit covers the whole fwmark feature.

Fixes: 0b5c7efd ("sch_cake: Permit use of connmarks as tin classifiers")
Suggested-by: Felix Resch <fuller@beif.de>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

netdev_alloc_skb can fail and return a NULL pointer which is
dereferenced without a check. The patch avoids such a scenario.
Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>

When sending non-linear skbs with jumbo frames, we set up the non-paged
data and mark that as a last segment, although the paged fragments are
also prepared. This will stall the TX queue and trigger a watchdog warning
(a simple reproducer is to run an iperf client mode TCP test with a large
MTU - networking fails instantly).

Fix by checking if the skb is non-linear.
Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Acked-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 0e80bdc9 ("stmmac: first frame prep at the end of xmit
routine") overlooked jumbo frames when re-ordering the code, and as a
result the own bit was not getting set anymore for the first jumbo frame
descriptor. Commit 487e2e22 ("net: stmmac: Set OWN bit for jumbo
frames") tried to fix this, but now the bit is getting set too early and
the DMA may start while we are still setting up the remaining descriptors.
And with the chain mode the own bit remains still unset.

Fix by setting the own bit at the end of xmit also with jumbo frames.

Fixes: 0e80bdc9 ("stmmac: first frame prep at the end of xmit routine")
Fixes: 487e2e22 ("net: stmmac: Set OWN bit for jumbo frames")
Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Acked-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

register_snap_client may return NULL, all the callers
check it, but only print a warning. This will result in
NULL pointer dereference in unregister_snap_client and other
places.

It has always been used like this since v2.6
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge misc patches from Andrew Morton:

- a little bit more MM

- a few fixups

[ The "little bit more MM" is actually just one of the three patches
  Andrew sent for mm/filemap.c, I'm still mulling over two more of them
  from Josef Bacik     - Linus ]

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  include/linux/swap.h: use offsetof() instead of custom __swapoffset macro
  tools/testing/selftests/proc/proc-pid-vm.c: test with vsyscall in mind
  zram: default to lzo-rle instead of lzo
  filemap: pass vm_fault to the mmap ra helpers

Use offsetof() to calculate offset of a field to take advantage of
compiler built-in version when possible, and avoid UBSAN warning when
compiling with Clang:

  UBSAN: Undefined behaviour in mm/swapfile.c:3010:38
  member access within null pointer of type 'union swap_header'
  CPU: 6 PID: 1833 Comm: swapon Tainted: G S                4.19.23 #43
  Call trace:
   dump_backtrace+0x0/0x194
   show_stack+0x20/0x2c
   __dump_stack+0x20/0x28
   dump_stack+0x70/0x94
   ubsan_epilogue+0x14/0x44
   ubsan_type_mismatch_common+0xf4/0xfc
   __ubsan_handle_type_mismatch_v1+0x34/0x54
   __se_sys_swapon+0x654/0x1084
   __arm64_sys_swapon+0x1c/0x24
   el0_svc_common+0xa8/0x150
   el0_svc_compat_handler+0x2c/0x38
   el0_svc_compat+0x8/0x18

Link: http://lkml.kernel.org/r/20190312081902.223764-1-pihsun@chromium.orgSigned-off-by: Pi-Hsun Shih <pihsun@chromium.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

: selftests: proc: proc-pid-vm
: ========================================
: proc-pid-vm: proc-pid-vm.c:277: main: Assertion `rv == strlen(buf0)' failed.
: Aborted

Because the vsyscall mapping is enabled.  Read from vsyscall page to tell
if vsyscall is being used.

Link: http://lkml.kernel.org/r/20190307183204.GA11405@avx2
Link: http://lkml.kernel.org/r/20190219094722.GB28258@shao2-debian
Fixes: 34aab6bec23e7e9 ("proc: test /proc/*/maps, smaps, smaps_rollup, statm")
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Reported-by: kernel test robot <rong.a.chen@intel.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lzo-rle gives higher performance and similar compression ratios to lzo.

Link: http://lkml.kernel.org/r/20190205155944.16007-4-dave.rodgman@arm.comSigned-off-by: Dave Rodgman <dave.rodgman@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

All of the arguments to these functions come from the vmf.

Cut down on the amount of arguments passed by simply passing in the vmf
to these two helpers.

Link: http://lkml.kernel.org/r/20181211173801.29535-3-josef@toxicpanda.comSigned-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Quentin Monnet says:

====================
Hi,
This set is an update to the documentation for the BPF helper functions in
the UAPI header bpf.h, used to generate the bpf-helpers(7) man page.

First patch contains fixes to the current documentation. The second patch
adds documentation for the two helpers bpf_spin_lock() and
bpf_spin_unlock(). The last patch simply reports the changes to the version
of that header in tools/.
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Synchronise the bpf.h header under tools, to report the latest fixes and
additions to the documentation for the BPF helpers.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Add documentation for the BPF spinlock-related helpers to the doc in
bpf.h. I added the constraints and restrictions coming with the use of
spinlocks for BPF: not all of it is directly related to the use of the
helper, but I thought it would be nice for users to find them in the man
page.

This list of restrictions is nearly a verbatim copy of the list in
Alexei's commit log for those helpers.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Another round of minor fixes for the documentation of the BPF helpers
located in the UAPI bpf.h header file. Changes include:

- Moving around description of some helpers, to keep the descriptions in
  the same order as helpers are declared (bpf_map_push_elem(), leftover
  from commit 90b1023f ("bpf: fix documentation for eBPF helpers"),
  bpf_rc_keydown(), and bpf_skb_ancestor_cgroup_id()).
- Fixing typos ("contex" -> "context").
- Harmonising return types ("void* " -> "void *", "uint64_t" -> "u64").
- Addition of the "bpf_" prefix to bpf_get_storage().
- Light additions of RST markup on some keywords.
- Empty line deletion between description and return value for
  bpf_tcp_sock().
- Edit for the description for bpf_skb_ecn_set_ce() (capital letters,
  acronym expansion, no effect if ECT not set, more details on return
  value).
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>