- 23 Aug, 2017 3 commits
-
-
Frank Wang authored
Rockchip's rv1108-evb board has one usb otg controller and one usb host controller, each usb controller connect with one usb-phy port through UTMI+ interface. This patch enables them to support usb on rv1108-evb board. Signed-off-by:
Frank Wang <frank.wang@rock-chips.com> Signed-off-by:
Heiko Stuebner <heiko@sntech.de>
-
Frank Wang authored
This patch adds usb otg/host controllers and phys nodes for RV1108 SoCs. Signed-off-by:
-
Frank Wang authored
This patch adds the compatible of GRF and USBGRF for RV1108 SoCs. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
- 22 Aug, 2017 2 commits
-
-
Andy Yan authored
The cpu is powered by regulator vdd_core on RV1108 evalution board. Add it to the cpu dt node. Signed-off-by:
Andy Yan <andy.yan@rock-chips.com> Signed-off-by:
-
Andy Yan authored
Add cpu opp table for rv1108 to support frequency from 408MHZ to 1008MHZ. Signed-off-by:
-
- 21 Aug, 2017 3 commits
-
-
Simon Xue authored
Add VPU/VDEC/VOP/IEP iommu nodes Signed-off-by:
Simon Xue <xxm@rock-chips.com> Signed-off-by:
-
Andy Yan authored
Add dt node of bosch accelerometer bma250e on rv1108 evb. Signed-off-by:
-
Andy Yan authored
RK805 is used as the voltage regulator on rv1108 evaluation board. Add device tree node for it. Signed-off-by:
-
- 18 Aug, 2017 2 commits
-
-
Andy Yan authored
RV1108 EVB uses pwm0 modulate the backlight, add dt node to enable it. Signed-off-by:
-
Andy Yan authored
Add pwm device tree node for rv1108 soc Signed-off-by:
-
- 14 Aug, 2017 2 commits
-
-
Andy Yan authored
Add SPI device tree node for rv1108. Signed-off-by:
-
Andy Yan authored
Add saradc device tree node for rv1108 soc Signed-off-by:
-
- 13 Aug, 2017 3 commits
-
-
Andy Yan authored
Add watchdog device tree node for rv1108 Signed-off-by:
-
Andy Yan authored
There are four i2c controllers on rv1108, add device tree node for them. Signed-off-by:
-
Heiko Stuebner authored
-
- 06 Aug, 2017 6 commits
-
-
Elaine Zhang authored
Make the code look better. Signed-off-by:
Elaine Zhang <zhangqing@rock-chips.com> Signed-off-by:
-
Elaine Zhang authored
i2s1 has 2 channels but not 8 channels. Signed-off-by:
-
Elaine Zhang authored
Add new clk ids for the peripherals on rv1108 soc. Signed-off-by:
-
Simon Xue authored
Add IEP/ISP/VPU/HEVC iommu nodes Signed-off-by:
-
Tao Huang authored
In order to be able to use more than 4GB of RAM when the LPAE is activated, the dts must be converted in 64 bits. Signed-off-by:
Tao Huang <huangtao@rock-chips.com> Signed-off-by:
-
Huibin Hong authored
Add spi node and spi pinctrl for rk322x Signed-off-by:
Huibin Hong <huibin.hong@rock-chips.com> Signed-off-by:
-
- 22 Jul, 2017 2 commits
-
-
Heiko Stuebner authored
Somehow the strange property ordering of the rv1108 mmc nodes slipped through when it was added. To lessen the confusion in the future, do the needed reordering to bring them in line with our regular order. Signed-off-by: -
Andy Yan authored
Enable sdmmc on rv1108 evaluation board. Also add pinctrl for sdmmc controller. Signed-off-by:
-
- 17 Jul, 2017 1 commit
-
-
Finley Xiao authored
Add a efuse node in the device tree for the rk3228 SoC. Signed-off-by:
Finley Xiao <finley.xiao@rock-chips.com> Signed-off-by:
-
- 16 Jul, 2017 16 commits
-
-
Frank Wang authored
This patch adds gpio power-key support for rk3229-evb board. Signed-off-by:
-
Frank Wang authored
This patch enables the tsadc for rk3229-evb board. The rk3229 evb board uses the CRU to reset the chip since it has not the PMIC to connect it, and TSHUT is low active on evb board. Signed-off-by:
-
Frank Wang authored
This patch enables eMMC support for rk3229-evb board. Signed-off-by:
-
David Wu authored
This patch enables io-domain support for rk3229-evb board. The power domain of VCCIO3 is selected from maskrom, so we do not need to configure it. Signed-off-by:
David Wu <david.wu@rock-chips.com> Signed-off-by:
-
Finley Xiao authored
This patch adds the cpu-supply property so that cpu can do dvfs on rk3229-evb board. Signed-off-by:
-
Frank Wang authored
This patch adds regulator info for rk3229-evb board. Signed-off-by:
-
Shawn Lin authored
This patch adds sdmmc/sdio controller nodes for rk3228 SoC. Signed-off-by:
Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by:
-
Shawn Lin authored
This adds amend compatible content for eMMC of RK3228 SoC. Signed-off-by:
-
Frank Wang authored
This patch sets PSCI as the default cpu enable-method for RK3228 SoC. Signed-off-by:
-
Shawn Lin authored
We deprecated the "num-slots" property now and plan to get rid of it finally. Just move a step to cleanup it from DT. Signed-off-by:
Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by:
-
David Wu authored
This patch adds io-domain support for rk3228 SoC. Signed-off-by:
-
Frank Wang authored
Due to some tiny differences between RK3228 and RK3229, this patch adds a basic dtsi file which first includes a new CPU opp table for RK3229. Signed-off-by:
-
Jacob Chen authored
rk3288-evb have many tablet-used adc buttons. Signed-off-by:
Jacob Chen <jacob-chen@iotwrt.com> Signed-off-by:
-
Jacob Chen authored
saradc in rk3288-evb use 1.8v ref. Signed-off-by:
-
Jacob Chen authored
Add reference to the Mali GPU device tree node on rk3288-fennec Tested on Fennec board. Signed-off-by:
-
Jacob Chen authored
Add reference to the Mali GPU device tree node on rk3288-evb. Tested on rk3288-evb-act8846 board. Signed-off-by:
-
