Match coding style line length limitation where checkpatch.pl
reported over-80-character-line warnings.
Signed-off-by: Anton Salikhmetov <alexo@tuxera.com>
Signed-off-by: Christoph Hellwig <hch@tuxera.com>

Fix a flag checking artifact in hfsplus_ioctl_getflags() routine
found while doing clean-up against assignments inside `if's.
Signed-off-by: Anton Salikhmetov <alexo@tuxera.com>
Signed-off-by: Christoph Hellwig <hch@tuxera.com>

Flush the disk cache in fsync and sync to make sure data actually is
on disk on completion of these system calls.  There is a nobarrier
mount option to disable this behaviour.  It's slightly misnamed now
that barrier actually are gone, but it matches the name used by all
major filesystems.
Signed-off-by: Christoph Hellwig <hch@tuxera.com>

Avoid doing unessecary work in fsync.  Do nothing unless the inode
was marked dirty, and only write the various metadata inodes out if
they contain any dirty state from this inode.  This is archived by
adding three new dirty bits to the hfsplus-specific inode which are
set in the correct places.
Signed-off-by: Christoph Hellwig <hch@tuxera.com>

Split the flags field in the hfsplus inode into an extent_state
flag that is locked by the extent_lock, and a new flags field
that uses atomic bitops.  The second will grow more flags in the
next patch.
Signed-off-by: Christoph Hellwig <hch@tuxera.com>

fsync is supposed to not just work on regular files, but also on
directories.  Fortunately enough hfsplus_file_fsync works just fine
for directories, so we can just wire it up.
Signed-off-by: Christoph Hellwig <hch@tuxera.com>

Remove lots of code we don't need from fsync, we just need to call
->write_inode on the inode if it's dirty, for which sync_inode_metadata
is a lot more efficient than write_inode_now, and we need to write
out the various metadata inodes, which we now do explicitly instead
of by calling ->sync_fs.
Signed-off-by: Christoph Hellwig <hch@tuxera.com>

There is no reason to write out the metadata inodes or volume headers
during a non-blocking sync, as we are almost guaranteed to dirty them
again during the inode writeouts.
Signed-off-by: Christoph Hellwig <hch@tuxera.com>

hfsplus stores all metadata except for the volume headers in special
inodes.  While these are marked hashed and periodically written out
by the flusher threads, we can't rely on that for sync.  For the case
of a data integrity sync the VM has life-lock avoidance code that
avoids writing inodes again that are redirtied during the sync,
which is something that can happen easily for hfsplus.  So make sure
we explicitly write out the metadata inodes at the beginning of
hfsplus_sync_fs.
Signed-off-by: Christoph Hellwig <hch@tuxera.com>

Switch the hfsplus partition table reding for cdroms to use our bio
helpers.  Again we don't rely on any caching in the buffer_heads, and
this gets rid of the last buffer_head use in hfsplus.
Signed-off-by: Christoph Hellwig <hch@tuxera.com>

The hfsplus backup volume header is located two blocks from the end of
the device.  In case of device sizes that are not 4k aligned this means
we can't access it using buffer_heads when using the default 4k block
size.

Switch to using raw bios to read/write all buffer headers.  We were not
relying on any caching behaviour of the buffer heads anyway.  Additionally
always read in the backup volume header during mount to verify that we
can actually read it.
Signed-off-by: Christoph Hellwig <hch@tuxera.com>

Remove opencoded writing of the volume header in hfsplus_fill_super
and hfsplus_put_super and offload it to hfsplus_sync_fs.  In the
put_super case this means we only write the superblock once instead
of twice.
Signed-off-by: Christoph Hellwig <hch@tuxera.com>

Turn a few noisy debug printks that show up during xfstests into
complied out debug print statements.
Signed-off-by: Christoph Hellwig <hch@tuxera.com>

hfsplus only actually uses the force option during remount, but it uses
the full option parser with a fake superblock to do so.  This means remount
will fail if any nls option is set (which happens frequently with older
mount tools), even if it is the same.

Fix this by adding a simpler version of the parser that only parses the force
option for remount.
Signed-off-by: Christoph Hellwig <hch@tuxera.com>

Fix regression introduced by commit 79da826a ("writeback: report
dirty thresholds in /proc/vmstat").

The incorrect pointer arithmetic can result in problems like this:

  BUG: unable to handle kernel paging request at 07c06d16
  IP: [<c050c336>] strnlen+0x6/0x20
  Call Trace:
   [<c050a249>] ? string+0x39/0xe0
   [<c042be6b>] ? __wake_up_common+0x4b/0x80
   [<c050afcc>] ? vsnprintf+0x1ec/0x380
   [<c04b380e>] ? seq_printf+0x2e/0x60
   [<c04829a6>] ? vmstat_show+0x26/0x30
   [<c04b3bb6>] ? seq_read+0xa6/0x380
   [<c04b3b10>] ? seq_read+0x0/0x380
   [<c04d5d2f>] ? proc_reg_read+0x5f/0x90
   [<c049c4a1>] ? vfs_read+0xa1/0x140
   [<c04d5cd0>] ? proc_reg_read+0x0/0x90
   [<c049c981>] ? sys_read+0x41/0x70
   [<c0402bd0>] ? sysenter_do_call+0x12/0x26
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Michael Rubin <mrubin@google.com>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ASoC: tpa6130a2: Get rid of compile warning from tpa6130a2_power
  ALSA: hda - MacBookAir3,1(3,2) alsa support
  ASoC: fix the building issue of missing codec field in 'struct snd_soc_card'
  ALSA: usb-audio - Support for Power/Status LED on Creative USB X-Fi S51
  ALSA: asihpi - Unsafe memory management when allocating control cache
  ASoC: Update WARN uses in wm_hubs
  ASoC: Include cx20442 to SND_SOC_ALL_CODECS
  ASoC: Fix SND_SOC_ALL_CODECS typo for jz4740
  ASoC: Remove volatility from WM8900 POWER1 register
  ALSA: lx6464es - make 1 bit signed bitfield unsigned
  ALSA: cs46xx memory management fixes for cs46xx_dsp_spos_create()
  ALSA: usb - driver neglects kmalloc return value check and may deref NULL
  ASoC: tpa6130a2: Fix unbalanced regulator disables
  ASoC: tlv320dac33: Mode1 FIFO auto configuration fix
  ASoC: tlv320dac33: Limit the US_TO_SAMPLES macro
  ASoC: tlv320dac33: Error handling for broken chip
  ASoC: Check return value of struct_strtoul() in pmdown_time_set()

Patch "ASoC: tpa6130a2: Fix unbalanced regulator disables" introduced a
compiler warning "‘ret’ may be used uninitialized in this function".
Initialize ret to zero to get rid of it and making sure that the function
does not return any random error code when the code is falling through.
Signed-off-by: Jarkko Nikula <jhnikula@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge branch 'for-2.6.37' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/asoc-2.6 into fix/asoc

This patch add support for the MacBookAir3,1 and MacBookAir3,2 to the alsa
sound system.
Signed-off-by: Edgar (gimli) Hucek <gimli@dark-green.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

This slipped by when unifying the filemap and swap versions of
lock_page_or_retry()...
Signed-off-by: Michel Lespinasse <walken@google.com>
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Linus noted, and complained to me, that doing while lots of "git diff"'s
of kernel sources, these spinlocks were responsible for 27% of the
spinlock cost on his two-processor system as reported by perf.

Git was doing lots of parallel stats, and this was putting a lot of
pressure on ext4_getattr().  A spinlock to protect a single
memory-to-memory copy is pointless, so remove it.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

The preempt count logic tries to take the BKL into account, which breaks
when CONFIG_BKL is not set.

Use the same preempt_count offset that we use without CONFIG_PREEMPT
when CONFIG_BKL is disabled.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reported-and-tested-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This patch adds support for Power/Status LED on Creative USB X-Fi S51.
There is just one LED on the device. The LED can either be On or it
can be set to Blink. There doesn't seem to be a way to switch it off.
The control message to change LED status is similar to that of
audigy2nx except that the index is to be set to 0 and value is 1 for
Blink and 0 for On.

The 'Power LED' control in alsamixer when muted will cause the LED to
Blink continuously. When unmuted  the LED will stay On. The Creative
driver under Windows sets the LED to blink whenever audio is muted.
This LED can be treated as the CMSS LED but I figured since there is
just one LED, it should be treated as the Power LED. Is that alright?

I've also changed the comment "Usb X-Fi" to "Usb X-Fi S51" as there
are other external X-Fi devices from Creative like Usb X-Fi Go and
Xmod. The volume knob and LED support patch doesn't apply to them.
Signed-off-by: Mandar Joshi <emailmandar@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

I noticed that sound/pci/asihpi/hpicmn.c::hpi_alloc_control_cache() does
not check the return value from kmalloc(), which may fail.
If kmalloc() fails we'll dereference a null pointer and things will go bad
fast.
There are two memory allocations in that function and there's also the
problem that the first may succeed and the second may fail and nothing is
done about that either which will also go wrong down the line.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Acked-by: Eliot Blennerhassett <linux@audioscience.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

When expanding a parameterised string we may run out of space, this
triggers a realloc.  When computing the new allocation size we do not
allow for the terminating '\0'.  Allow for this when calculating the new
length.
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 7d945a3a ("logfs get_sb, part 3") broke the logfs build when
CONFIG_MTD is set due to a mangled logfs_get_sb_mtd() definition.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add missing newlines.
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: Jarkko Nikula <jhnikula@gmail.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

Include jz4740.c to SND_SOC_ALL_CODECS when the dependencies are met.
Signed-off-by: Jarkko Nikula <jhnikula@gmail.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

Not all bits can be read back from POWER1 so avoid corruption when using
a read/modify/write cycle by marking it non-volatile - the only thing we
read back from it is the chip revision which has diagnostic value only.
We can re-add later but that's a more invasive change than is suitable
for a bugfix.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Cc: stable@kernel.org

* 'for-linus' of git://www.jni.nu/cris:
  CRIS: Add paths for CRISv10 serial driver
  CRIS: Fix RS485 delay handling.
  Add missing "struct" to in sizeof.

* 'next-spi' of git://git.secretlab.ca/git/linux-2.6:
  spi/pl022: fix erroneous platform data in U300
  spi: fixed odd static string conventions in core code
  spi/bfin_spi: only request GPIO on first load
  spi/bfin_spi: handle error/status changes after data interrupts
  spi: enable spi_board_info to be registered after spi_master

Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>

converts a 1 bit signed bitfield to an unsigned.
Reported-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Tim Blechmann <tim@klingt.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

When reading through sound/pci/cs46xx/dsp_spos.c I noticed a couple of
things in cs46xx_dsp_spos_create().

It seems to me that we don't always free the various memory buffers we
allocate and we also do some work (structure member assignment) early,
that is completely pointless if some of the memory allocations fail and
we end up just aborting the whole thing.

I don't have hardware to test, so the patch below is compile tested only,
but it makes the following changes:

- Make sure we always free all allocated memory on failures.
- Don't do pointless work assigning to structure members before we know
  all memory allocations, that may abort progress, have completed
  successfully.
- Remove some trailing whitespace.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

sound/usb/pcm.c::snd_usb_pcm_check_knot() fails to check the return value
from kmalloc() and may end up dereferencing a null pointer.
The patch below (compile tested only) should take care of that little
problem.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>