- 23 Sep, 2020 2 commits
-
-
Takashi Iwai authored
Recently we applied a fix to cover the whole OSS sequencer ioctls with the mutex for dealing with the possible races. This works fine in general, but in theory, this may lead to unexpectedly long stall if an ioctl like SNDCTL_SEQ_SYNC is issued and an event with the far future timestamp was queued. For fixing such a potential stall, this patch changes the mutex lock applied conditionally excluding such an ioctl command. Also, change the mutex_lock() with the interruptible version for user to allow escaping from the big-hammer mutex. Fixes: 80982c7e ("ALSA: seq: oss: Serialize ioctls") Suggested-by:
Pavel Machek <pavel@ucw.cz> Link: https://lore.kernel.org/r/20200922083856.28572-1-tiwai@suse.deSigned-off-by:
Takashi Iwai <tiwai@suse.de>
-
František Kučera authored
This patch extends support for DJM-250MK2 and allows mapping playback and capture channels to available sources. Configures the card through USB commands. Signed-off-by:
František Kučera <franta-linux@frantovo.cz> Link: https://lore.kernel.org/r/20200922144206.10472-1-konference@frantovo.czSigned-off-by:
Takashi Iwai <tiwai@suse.de>
-
- 22 Sep, 2020 1 commit
-
-
Takashi Iwai authored
The recent change in lockdep for read lock caused the deadlock warnings in ALSA control code which uses the read_lock() for notification and else while write_lock_irqsave() is used for adding and removing the list entry. Although a deadlock would practically never hit in a real usage (the addition and the deletion can't happen with the notification), it's better to fix the read_lock() usage in a semantically correct way. This patch replaces the read_lock() calls with read_lock_irqsave() version for avoiding a reported deadlock. The notification code path takes the irq disablement in anyway, and other code paths are very short execution, hence there shouldn't be any big performance hit by this change. Fixes: e9181886 ("locking: More accurate annotations for read_lock()") Reported-by: syzbot+561a74f84100162990b2@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/20200922084953.29018-1-tiwai@suse.deSigned-off-by:
Takashi Iwai <tiwai@suse.de>
-
- 21 Sep, 2020 6 commits
-
-
Kai Vehmanen authored
The CONTROLLER_IN_GPU() macro has different semantics than the similarly named macro in hda_intel.c. The name is also misleading as the macro is used to apply a Intel HSW/BDW programming logic for HDA controller clock configuration. Rename macro to reflect the actual implementation. Signed-off-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200921141741.2983072-5-kai.vehmanen@linux.intel.comSigned-off-by:
Takashi Iwai <tiwai@suse.de>
-
Kai Vehmanen authored
Currently i915_component_master_match() will return the first matching i915 instance. This does not work in case system has multiple i915 and HDA audio controller instances. Add a new connectivity check that handles following cases: - i915 and HDA controller on same PCI bus - discrete GPU with embedded HDA audio controller connected via PCI bridge Signed-off-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200921141741.2983072-4-kai.vehmanen@linux.intel.comSigned-off-by:
Takashi Iwai <tiwai@suse.de>
-
Kai Vehmanen authored
Add Intel DG1 to the CONTROLLER_IN_GPU list to ensure audio power is requested whenever programming the controller. Signed-off-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200921141741.2983072-3-kai.vehmanen@linux.intel.comSigned-off-by:
Takashi Iwai <tiwai@suse.de>
-
Kai Vehmanen authored
Add Intel DG1 PCI id to list of supported HDA controllers and add its HDMI id as well. Signed-off-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200921141741.2983072-2-kai.vehmanen@linux.intel.comSigned-off-by:
Takashi Iwai <tiwai@suse.de>
-
Arnd Bergmann authored
Using compat_alloc_user_space() tends to add complexity to the ioctl handling, so I am trying to remove it everywhere. The two callers in sound/core can rewritten to just call the same code that operates on a kernel pointer as the native handler. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20200918095642.1446243-1-arnd@arndb.deSigned-off-by:
Takashi Iwai <tiwai@suse.de>
-
Wang Qing authored
Change the comment typo: "ununsed" -> "unused". Signed-off-by:
Wang Qing <wangqing@vivo.com> Link: https://lore.kernel.org/r/1600329372-2266-1-git-send-email-wangqing@vivo.comSigned-off-by:
Takashi Iwai <tiwai@suse.de>
-
- 11 Sep, 2020 1 commit
-
-
Takashi Iwai authored
The tasklet is an old API that should be deprecated, usually can be converted to another decent API. In FireWire driver, a tasklet is still used for offloading the AMDTP PCM stream handling. It can be achieved gracefully with a work queued, too. This patch replaces the tasklet usage in firewire-lib driver with a simple work. The conversion is fairly straightforward but for the in_interrupt() checks that are replaced with the check using the current_work(). Note that in_interrupt() in amdtp_packet tracepoint is still kept as is. This is the place that is probed by both softirq of 1394 OHCI and a user task of a PCM application, and the work handling is already filtered in amdtp_domain_stream_pcm_pointer(). Tested-by:
Takashi Sakamoto <o-takashi@sakamocchi.jp> Acked-by:
Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20200909163659.21708-1-tiwai@suse.deSigned-off-by:
Takashi Iwai <tiwai@suse.de>
-
- 09 Sep, 2020 14 commits
-
-
YueHaibing authored
There is no caller in tree, so can remove it. Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20200909135744.33464-1-yuehaibing@huawei.comSigned-off-by:
Takashi Iwai <tiwai@suse.de>
-
YueHaibing authored
There is no caller in tree, so can remove it. Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20200909134927.33964-1-yuehaibing@huawei.comSigned-off-by:
Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
The miXart driver has been already converted to use the threaded IRQ instead of tasklet while there is a remaining comment still mentioning a tasklet. Update the comment appropriately. Fixes: 8d3a8b5c ("ALSA: mixart: Use nonatomic PCM ops") Link: https://lore.kernel.org/r/20200903104131.21097-12-tiwai@suse.deSigned-off-by:
Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
The tasklet is an old API that should be deprecated, usually can be converted to another decent API. In ASIHPI driver, a tasklet is still used for offloading the PCM IRQ handling. It can be achieved gracefully with a threaded IRQ, too. This patch replaces the tasklet usage in asihpi driver with a threaded IRQ. It also simplified some call patterns. Link: https://lore.kernel.org/r/20200903104131.21097-10-tiwai@suse.deSigned-off-by:
Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
The tasklet is an old API that should be deprecated, usually can be converted to another decent API. In Riptide driver, a tasklet is still used for offloading the PCM IRQ handling. It can be achieved gracefully with a threaded IRQ, too. This patch replaces the tasklet usage in riptide driver with a threaded IRQ. Link: https://lore.kernel.org/r/20200903104131.21097-9-tiwai@suse.deSigned-off-by:
Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
The tasklet is an old API that should be deprecated, usually can be converted to another decent API. In HDSP-MADI driver, a tasklet is still used for offloading the MIDI I/O handling (optional via mixer switch). It can be achieved gracefully with a work queued, too. This patch replaces the tasklet usage in HDSP-MADI driver with a simple work. The conversion is fairly straightforward. The only significant difference is that the work initialization is moved to the right place in snd_hdspm_create() and cancel_work_sync() is always called in snd_hdspm_free() to assure killing the pending works. Link: https://lore.kernel.org/r/20200903104131.21097-8-tiwai@suse.deSigned-off-by:
Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
The tasklet is an old API that should be deprecated, usually can be converted to another decent API. In HDSP driver, a tasklet is still used for offloading the MIDI I/O handling (optional via mixer switch). It can be achieved gracefully with a work queued, too. This patch replaces the tasklet usage in HDSP driver with a simple work. The conversion is fairly straightforward. The only significant difference is that a superfluous tasklet_kill() call is removed from snd_hdap_midi_input_trigger(). Link: https://lore.kernel.org/r/20200903104131.21097-7-tiwai@suse.deSigned-off-by:
Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
The tasklet is an old API that should be deprecated, usually can be converted to another decent API. In aloop driver, a tasklet is still used for offloading the timer event task. It can be achieved gracefully with a work queued, too. This patch replaces the tasklet usage in aloop driver with a simple work. Link: https://lore.kernel.org/r/20200903104131.21097-6-tiwai@suse.deSigned-off-by:
Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
The tasklet is an old API that should be deprecated, usually can be converted to another decent API. In UA101 driver, a tasklet is still used for handling the output URBs. It can be achieved gracefully with a work queued in the high-prio system workqueue, too. This patch replaces the tasklet usage in UA101 driver with a simple work. Link: https://lore.kernel.org/r/20200903104131.21097-5-tiwai@suse.deSigned-off-by:
Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
The tasklet is an old API that should be deprecated, usually can be converted to another decent API. In USB-audio driver, a tasklet is still used in MIDI interface code for handling the output byte stream. It can be achieved gracefully with a work queued in the high-prio system workqueue. This patch replaces the tasklet usage in USB-audio driver with a simple work. Link: https://lore.kernel.org/r/20200903104131.21097-4-tiwai@suse.deSigned-off-by:
Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
The tasklet is an old API that should be deprecated, usually can be converted to another decent API. In ALSA core timer API, the callbacks can be offlined to a tasklet when a flag is set in the timer backend. It can be achieved gracefully with a work queued in the high-prio system workqueue. This patch replaces the usage of tasklet in ALSA timer API with a simple work. Currently the tasklet feature is used only in the system timer and hrtimer backends, so both are patched to use the new flag name SNDRV_TIMER_HW_WORK, too. Link: https://lore.kernel.org/r/20200903104131.21097-3-tiwai@suse.deSigned-off-by:
Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
The tasklet is an old API that should be deprecated, usually can be converted to another decent API. This patch replaces the usage of tasklet in pcsp driver with a simple work. In pcsp driver, a global tasklet is used for offloading the period-elapse handling in the hrtimer callback (introduced in commit 96c7d478 "ALSA: pcsp - Fix locking messes in snd-pcsp"). It can be achieved gracefully with a work queued in the high-prio system workqueue. This also changes tasklet_kill() with cancel_work_sync() in the sync_stop callback, which is anyway better to assure canceling the pending tasks. Link: https://lore.kernel.org/r/20200903104131.21097-2-tiwai@suse.deSigned-off-by:
Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Back-merge to apply the tasklet conversion patches that are based on the already applied tasklet API changes on 5.9-rc4. Signed-off-by:
Takashi Iwai <tiwai@suse.de>
-
Hui Wang authored
The Mic connects to the Nid 0x19, but the configuration of Nid 0x19 is not defined to Mic, and also need to set the coeff to enable the auto detection on the Nid 0x19. After this change, the Mic plugging in or plugging out could be detected and could record the sound from the Mic. And the coeff value is suggested by Kailang of Realtek. Cc: Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Hui Wang <hui.wang@canonical.com> Link: https://lore.kernel.org/r/20200909020041.8967-1-hui.wang@canonical.comSigned-off-by:
Takashi Iwai <tiwai@suse.de>
-
- 07 Sep, 2020 1 commit
-
-
Luke D Jones authored
The GX502 requires a few steps to enable the headset i/o: pincfg, verbs to enable and unmute the amp used for headpone out, and a jacksense callback to toggle output via internal or jack using a verb. Signed-off-by:
Luke D Jones <luke@ljones.dev> Cc: <stable@vger.kernel.org> BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=208005 Link: https://lore.kernel.org/r/20200907081959.56186-1-luke@ljones.devSigned-off-by:
Takashi Iwai <tiwai@suse.de>
-
- 03 Sep, 2020 15 commits
-
-
Takashi Iwai authored
There've been quite a few regression reports about the lowered volume (reduced to ca 65% from the previous level) on Lenovo Thinkpad X1 after the commit d2cd795c ("ALSA: hda - fixup for the bass speaker on Lenovo Carbon X1 7th gen"). Although the commit itself does the right thing from HD-audio POV in order to have a volume control for bass speakers, it seems that the machine has some secret recipe under the hood. Through experiments, Benjamin Poirier found out that the following routing gives the best result: * DAC1 (NID 0x02) -> Speaker pin (NID 0x14) * DAC2 (NID 0x03) -> Shared by both Bass Speaker pin (NID 0x17) & Headphone pin (0x21) * DAC3 (NID 0x06) -> Unused DAC1 seems to have some equalizer internally applied, and you'd get again the output in a bad quality if you connect this to the headphone pin. Hence the headphone is connected to DAC2, which is now shared with the bass speaker pin. DAC3 has no volume amp, hence it's not connected at all. For achieving the routing above, this patch introduced a couple of workarounds: * The connection list of bass speaker pin (NID 0x17) is reduced not to include DAC3 (NID 0x06) * Pass preferred_pairs array to specify the fixed connection Here, both workarounds are needed because the generic parser prefers the individual DAC assignment over others. When the routing above is applied, the generic parser creates the two volume controls "Front" and "Bass Speaker". Since we have only two DACs for three output pins, those are not fully controlling each output individually, and it would confuse PulseAudio. For avoiding the pitfall, in this patch, we rename those volume controls to some unique ones ("DAC1" and "DAC2"). Then PulseAudio ignore them and concentrate only on the still good-working "Master" volume control. If a user still wants to control each DAC volume, they can still change manually via "DAC1" and "DAC2" volume controls. Fixes: d2cd795c ("ALSA: hda - fixup for the bass speaker on Lenovo Carbon X1 7th gen") Reported-by:
Benjamin Poirier <benjamin.poirier@gmail.com> Reviewed-by:
Jaroslav Kysela <perex@perex.cz> Tested-by:
Benjamin Poirier <benjamin.poirier@gmail.com> Cc: <stable@vger.kernel.org> BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207407#c10 BugLink: https://gist.github.com/hamidzr/dd81e429dc86f4327ded7a2030e7d7d9#gistcomment-3214171 BugLink: https://gist.github.com/hamidzr/dd81e429dc86f4327ded7a2030e7d7d9#gistcomment-3276276 Link: https://lore/kernel.org/r/20200829112746.3118-1-benjamin.poirier@gmail.com Link: https://lore.kernel.org/r/20200903083300.6333-1-tiwai@suse.deSigned-off-by:
Takashi Iwai <tiwai@suse.de>
-
Pierre-Louis Bossart authored
Fix cppcheck warning: sound/drivers/vx/vx_pcm.c:63:7: style: Variable 'buf' is assigned a value that is never used. [unreadVariable] buf = (unsigned char *)runtime->dma_area; ^ Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200902212133.30964-19-pierre-louis.bossart@linux.intel.comSigned-off-by:
Takashi Iwai <tiwai@suse.de>
-
Pierre-Louis Bossart authored
Fix cppcheck warning: sound/drivers/vx/vx_pcm.c:539:30: style: Variable 'chip->playback_pipes[audio]' is reassigned a value before the old one has been used. [redundantAssignment] chip->playback_pipes[audio] = pipe; ^ sound/drivers/vx/vx_pcm.c:533:31: note: chip->playback_pipes[audio] is assigned chip->playback_pipes[audio] = pipe; ^ sound/drivers/vx/vx_pcm.c:539:30: note: chip->playback_pipes[audio] is overwritten chip->playback_pipes[audio] = pipe; ^ Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200902212133.30964-18-pierre-louis.bossart@linux.intel.comSigned-off-by:
Takashi Iwai <tiwai@suse.de>
-
Pierre-Louis Bossart authored
Fix cppcheck warning sound/drivers/vx/vx_core.c:600:49: style: Clarify calculation precedence for '&' and '?'. [clarifyCalculation] chip->chip_status & VX_STAT_XILINX_LOADED ? "Loaded" : "No"); ^ sound/drivers/vx/vx_core.c:602:47: style: Clarify calculation precedence for '&' and '?'. [clarifyCalculation] chip->chip_status & VX_STAT_DEVICE_INIT ? "Yes" : "No"); ^ Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200902212133.30964-17-pierre-louis.bossart@linux.intel.comSigned-off-by:
Takashi Iwai <tiwai@suse.de>
-
Pierre-Louis Bossart authored
fix cppcheck: sound/core/rawmidi.c:1711:49: style:inconclusive: Function 'snd_rawmidi_free' argument 1 names different: declaration 'rawmidi' definition 'rmidi'. [funcArgNamesDifferent] Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200902212133.30964-16-pierre-louis.bossart@linux.intel.comSigned-off-by:
Takashi Iwai <tiwai@suse.de>
-
Pierre-Louis Bossart authored
Fix cppcheck warnings: sound/atmel/ac97c.c:478:30: style: Clarify calculation precedence for '&' and '?'. [clarifyCalculation] casr & AC97C_CSR_OVRUN ? " OVRUN" : "", ^ sound/atmel/ac97c.c:479:30: style: Clarify calculation precedence for '&' and '?'. [clarifyCalculation] casr & AC97C_CSR_RXRDY ? " RXRDY" : "", ^ sound/atmel/ac97c.c:480:30: style: Clarify calculation precedence for '&' and '?'. [clarifyCalculation] casr & AC97C_CSR_UNRUN ? " UNRUN" : "", ^ sound/atmel/ac97c.c:481:30: style: Clarify calculation precedence for '&' and '?'. [clarifyCalculation] casr & AC97C_CSR_TXEMPTY ? " TXEMPTY" : "", ^ sound/atmel/ac97c.c:482:30: style: Clarify calculation precedence for '&' and '?'. [clarifyCalculation] casr & AC97C_CSR_TXRDY ? " TXRDY" : "", ^ sound/atmel/ac97c.c:524:30: style: Clarify calculation precedence for '&' and '?'. [clarifyCalculation] cosr & AC97C_CSR_OVRUN ? " OVRUN" : "", ^ sound/atmel/ac97c.c:525:30: style: Clarify calculation precedence for '&' and '?'. [clarifyCalculation] cosr & AC97C_CSR_RXRDY ? " RXRDY" : "", ^ sound/atmel/ac97c.c:526:30: style: Clarify calculation precedence for '&' and '?'. [clarifyCalculation] cosr & AC97C_CSR_TXEMPTY ? " TXEMPTY" : "", ^ sound/atmel/ac97c.c:527:30: style: Clarify calculation precedence for '&' and '?'. [clarifyCalculation] cosr & AC97C_CSR_TXRDY ? " TXRDY" : "", ^ Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200902212133.30964-15-pierre-louis.bossart@linux.intel.comSigned-off-by:
Takashi Iwai <tiwai@suse.de>
-
Pierre-Louis Bossart authored
Fix cppcheck warning: sound/ac97/bus.c:133:60: style:inconclusive: Function 'snd_ac97_bus_scan_one' argument 1 names different: declaration 'ac97' definition 'adrv'. [funcArgNamesDifferent] Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200902212133.30964-14-pierre-louis.bossart@linux.intel.comSigned-off-by:
Takashi Iwai <tiwai@suse.de>
-
Pierre-Louis Bossart authored
Fix Sparse warning: sound/usb/mixer_scarlett_gen2.c:1949:24: warning: cast to restricted __le32 Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200902212133.30964-13-pierre-louis.bossart@linux.intel.comSigned-off-by:
Takashi Iwai <tiwai@suse.de>
-
Pierre-Louis Bossart authored
Fix cppcheck warnings and use same names in headers and C code. Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200902212133.30964-12-pierre-louis.bossart@linux.intel.comSigned-off-by:
Takashi Iwai <tiwai@suse.de>
-
Pierre-Louis Bossart authored
Fix cppcheck warning: sound/pci/hda/hda_auto_parser.c:353:7: style: Local variable 'i' shadows outer variable [shadowVariable] int i = 0; ^ sound/pci/hda/hda_auto_parser.c:182:6: note: Shadowed declaration int i; ^ sound/pci/hda/hda_auto_parser.c:353:7: note: Shadow variable int i = 0; ^ It's not clear why a new declaration was added, remove and reuse variable declared with larger scope. Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200902212133.30964-11-pierre-louis.bossart@linux.intel.comSigned-off-by:
Takashi Iwai <tiwai@suse.de>
-
Pierre-Louis Bossart authored
Follow recommendation in Documentation/scheduler/completion.rst and use macro to declare local 'struct completion' Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200902212133.30964-10-pierre-louis.bossart@linux.intel.comSigned-off-by:
Takashi Iwai <tiwai@suse.de>
-
Pierre-Louis Bossart authored
Follow recommendation in Documentation/scheduler/completion.rst and use macro to declare local 'struct completion' Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200902212133.30964-9-pierre-louis.bossart@linux.intel.comSigned-off-by:
Takashi Iwai <tiwai@suse.de>
-
Pierre-Louis Bossart authored
Fix cppcheck warning: sound/core/compress_offload.c:1044:6: style: Redundant initialization for 'ret'. The initialized value is overwritten before it is read. [redundantInitialization] ret = snd_register_device(SNDRV_DEVICE_TYPE_COMPRESS, ^ sound/core/compress_offload.c:1034:10: note: ret is initialized int ret = -EINVAL; ^ sound/core/compress_offload.c:1044:6: note: ret is overwritten ret = snd_register_device(SNDRV_DEVICE_TYPE_COMPRESS, ^ Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Acked-by:
Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20200902212133.30964-8-pierre-louis.bossart@linux.intel.comSigned-off-by:
Takashi Iwai <tiwai@suse.de>
-
Pierre-Louis Bossart authored
Fix cppcheck warning and only dereference once the initial checks are done: sound/core/compress_offload.c:516:38: warning: Either the condition '!stream' is redundant or there is possible null pointer dereference: stream. [nullPointerRedundantCheck] struct snd_compr_runtime *runtime = stream->runtime; ^ sound/core/compress_offload.c:518:17: note: Assuming that condition '!stream' is not redundant if (snd_BUG_ON(!(stream) || !(stream)->runtime)) ^ sound/core/compress_offload.c:516:38: note: Null pointer dereference struct snd_compr_runtime *runtime = stream->runtime; ^ Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Acked-by:
Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20200902212133.30964-7-pierre-louis.bossart@linux.intel.comSigned-off-by:
Takashi Iwai <tiwai@suse.de>
-
Pierre-Louis Bossart authored
fix cppcheck warning: sound/core/timer.c:1286:9: style: Clarify calculation precedence for '&' and '?'. [clarifyCalculation] ? "running" : "stopped"); ^ Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200902212133.30964-6-pierre-louis.bossart@linux.intel.comSigned-off-by:
Takashi Iwai <tiwai@suse.de>
-