- 09 Aug, 2012 40 commits
-
-
Michael Chan authored
commit 10ce95d6 upstream. The workaround was mis-applied to all 5719 and 5720 chips. Signed-off-by:
Michael Chan <mchan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Greg KH authored
commit 02eca3f5 upstream. The Apple Thunderbolt ethernet device is already listed in the driver, but not hooked up in the MODULE_DEVICE_TABLE(). This fixes that and allows it to work properly. Signed-off-by:
-
Frank Blaschka authored
commit eabfbe62 upstream. Commit efc73f4b "net: Fix memory leak - vlan_info struct" adds deletion of VLAN 0 for devices with feature NETIF_F_HW_VLAN_FILTER. For driver qeth these are the layer 3 devices. Usually there exists no separate vlan net_device for VLAN 0. Thus the qeth functions qeth_l3_free_vlan_addresses4() and qeth_l3_free_vlan_addresses6() require an extra checking if function __vlan_find_dev_deep() returns with a net_device. Signed-off-by:
Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by:
Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by:
-
Virupax Sadashivpetimath authored
commit fd316941 upstream. Commit ffbbdd21 "spi: create a message queueing infrastructure" Accidentally deleted the logic to disable the port when unused leading to higher power consumption. Fix this up. Cc: Vinit Shenoy <vinit.shenoy@st.com> Signed-off-by:
Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Jeff Layton authored
commit 764a1b1a upstream. The readpages bug is a regression that was introduced in 6993f74a. This also fixes a couple of similar bugs in the uncached read and write codepaths. Also, prevent this sort of thing in the future by having cifsFileInfo_get take the spinlock itself, and adding a _locked variant for use in places that are already holding the lock. The _put code has always done that so this makes for a less confusing interface. Reviewed-by:
Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by:
Jeff Layton <jlayton@redhat.com> Signed-off-by:
Steve French <smfrench@gmail.com> Signed-off-by:
-
Jeff Layton authored
commit 7659624f upstream. sec=ntlmv2 as a mount option got dropped in the mount option overhaul. Cc: Sachin Prabhu <sprabhu@redhat.com> Reported-by:
Günter Kukkukk <linux@kukkukk.com> Signed-off-by:
-
Chris Mason authored
commit e9fbcb42 upstream. Each ordered operation has a free callback, and this was called with the worker spinlock held. Josef made the free callback also call iput, which we can't do with the spinlock. This drops the spinlock for the free operation and grabs it again before moving through the rest of the list. We'll circle back around to this and find a cleaner way that doesn't bounce the lock around so much. Signed-off-by:
Chris Mason <chris.mason@fusionio.com> Signed-off-by:
-
Kay Sievers authored
commit 70498253 upstream. Reserve PREFIX_MAX bytes in the LOG_LINE_MAX line when buffering a continuation line, to be able to properly prefix the LOG_LINE_MAX line with the syslog prefix and timestamp when printing it. Reported-By:
Dave Jones <davej@redhat.com> Signed-off-by:
Kay Sievers <kay@vrfy.org> Signed-off-by:
-
Lan Tianyu authored
commit f197ac13 upstream. In the ac.c, power_supply_register()'s return value is not checked. As a result, the driver's add() ops may return success even though the device failed to initialize. For example, some BIOS may describe two ACADs in the same DSDT. The second ACAD device will fail to register, but ACPI driver's add() ops returns sucessfully. The ACPI device will receive ACPI notification and cause OOPS. https://bugzilla.redhat.com/show_bug.cgi?id=772730Signed-off-by:
Lan Tianyu <tianyu.lan@intel.com> Signed-off-by:
Len Brown <len.brown@intel.com> Signed-off-by:
-
Jean Delvare authored
commit f712c71f upstream. Many firmwares have a common register definition bug where 8-bit access width is specified for a 32-bit register. Ideally this should be fixed in the BIOS, but earlier versions of the kernel did not complain, so fix that up silently. This closes kernel bug #43282: https://bugzilla.kernel.org/show_bug.cgi?id=43282Signed-off-by:
Jean Delvare <jdelvare@suse.de> Acked-by:
Huang Ying <ying.huang@intel.com> Acked-by:
Gary Hade <garyhade@us.ibm.com> Signed-off-by:
-
Tejun Heo authored
commit 65758202 upstream. Currently, all workqueue cpu hotplug operations run off CPU_PRI_WORKQUEUE which is higher than normal notifiers. This is to ensure that workqueue is up and running while bringing up a CPU before other notifiers try to use workqueue on the CPU. Per-cpu workqueues are supposed to remain working and bound to the CPU for normal CPU_DOWN_PREPARE notifiers. This holds mostly true even with workqueue offlining running with higher priority because workqueue CPU_DOWN_PREPARE only creates a bound trustee thread which runs the per-cpu workqueue without concurrency management without explicitly detaching the existing workers. However, if the trustee needs to create new workers, it creates unbound workers which may wander off to other CPUs while CPU_DOWN_PREPARE notifiers are in progress. Furthermore, if the CPU down is cancelled, the per-CPU workqueue may end up with workers which aren't bound to the CPU. While reliably reproducible with a convoluted artificial test-case involving scheduling and flushing CPU burning work items from CPU down notifiers, this isn't very likely to happen in the wild, and, even when it happens, the effects are likely to be hidden by the following successful CPU down. Fix it by using different priorities for up and down notifiers - high priority for up operations and low priority for down operations. Workqueue cpu hotplug operations will soon go through further cleanup. Signed-off-by:
Tejun Heo <tj@kernel.org> Acked-by:
"Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by:
-
Ben Hutchings authored
commit 069f101f upstream. ZSMALLOC is tristate, but the code has no MODULE_LICENSE and since it depends on GPL-only symbols it cannot be loaded as a module. This in turn breaks zram which now depends on it. I assume it's meant to be Dual BSD/GPL like the other z-stuff. There is also no module_exit, which will make it impossible to unload. Add the appropriate module_init and module_exit declarations suggested by comments. Reported-by:
Christian Ohm <chr.ohm@gmx.net> References: http://bugs.debian.org/677273Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Reviewed-by:
Jonathan Nieder <jrnieder@gmail.com> Signed-off-by:
-
Paul Gortmaker authored
commit 2584f521 upstream. Also add information on where the respective trees are. Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by:
Rob Landley <rob@landley.net> Signed-off-by:
-
Jan Kara authored
commit 57b9655d upstream. When a partition table length is corrupted to be close to 1 << 32, the check for its length may overflow on 32-bit systems and we will think the length is valid. Later on the kernel can crash trying to read beyond end of buffer. Fix the check to avoid possible overflow. Reported-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Joerg Roedel authored
commit 2c9195e9 upstream. This did not work because devices are not put into the pt_domain. Fix this. Signed-off-by:
Joerg Roedel <joerg.roedel@amd.com> Signed-off-by:
-
Joerg Roedel authored
commit 2c13d47a upstream. Add missing spin_lock initialization in amd_iommu_bind_pasid() function and make lockdep happy again. Signed-off-by:
-
Tejun Heo authored
commit ce27e317 upstream. While refactoring cgroup file removal path, 05ef1d7c "cgroup: introduce struct cfent" incorrectly changed the @dir argument of simple_unlink() to the inode of the file being deleted instead of that of the containing directory. The effect of this bug is minor - ctime and mtime of the parent weren't properly updated on file deletion. Fix it by using @cgrp->dentry->d_inode instead. Signed-off-by:
Al Viro <viro@ZenIV.linux.org.uk> Acked-by:
Li Zefan <lizefan@huawei.com> Signed-off-by:
-
Heiko Carstens authored
commit 008c2e8f upstream. Make sure the kernel does not incorrectly create a SIGBUS signal during user space accesses: For user space accesses in the switched addressing mode case the kernel may walk page tables and access user address space via the kernel mapping. If a page table entry is invalid the function __handle_fault() gets called in order to emulate a page fault and trigger all the usual actions like paging in a missing page etc. by calling handle_mm_fault(). If handle_mm_fault() returns with an error fixup handling is necessary. For the switched addressing mode case all errors need to be mapped to -EFAULT, so that the calling uaccess function can return -EFAULT to user space. Unfortunately the __handle_fault() incorrectly calls do_sigbus() if VM_FAULT_SIGBUS is set. This however should only happen if a page fault was triggered by a user space instruction. For kernel mode uaccesses the correct action is to only return -EFAULT. So user space may incorrectly see SIGBUS signals because of this bug. For current machines this would only be possible for the switched addressing mode case in conjunction with futex operations. Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Martin Schwidefsky authored
commit 0f6f281b upstream. The downgrade of the 4 level page table created by init_new_context is currently done only in start_thread31. If a 31 bit process forks the new mm uses a 4 level page table, including the task size of 2<<42 that goes along with it. This is incorrect as now a 31 bit process can map memory beyond 2GB. Define arch_dup_mmap to do the downgrade after fork. Signed-off-by:
-
Heiko Carstens authored
commit 0008204f upstream. The s390 idle accounting code uses a sequence counter which gets used when the per cpu idle statistics get updated and read. One assumption on read access is that only when the sequence counter is even and did not change while reading all values the result is valid. On cpu hotplug however the per cpu data structure gets initialized via a cpu hotplug notifier on CPU_ONLINE. CPU_ONLINE however is too late, since the onlined cpu is already running and might access the per cpu data. Worst case is that the data structure gets initialized while an idle thread is updating its idle statistics. This will result in an uneven sequence counter after an update. As a result user space tools like top, which access /proc/stat in order to get idle stats, will busy loop waiting for the sequence counter to become even again, which will never happen until the queried cpu will update its idle statistics again. And even then the sequence counter will only have an even value for a couple of cpu cycles. Fix this by moving the initialization of the per cpu idle statistics to cpu_init(). I prefer that solution in favor of changing the notifier to CPU_UP_PREPARE, which would be a different solution to the problem. Signed-off-by:
-
Amitkumar Karwar authored
commit fe020120 upstream. mwifiex driver supports 2x2 chips as well. Hence valid mcs values are 0 to 15. The check for mcs index is corrected in this patch. For example: if 40MHz is enabled and mcs index is 11, "iw link" command would show "tx bitrate: 108.0 MBit/s" without this patch. Now it shows "tx bitrate: 108.0 MBit/s MCS 11 40Mhz" with the patch. Signed-off-by:
Amitkumar Karwar <akarwar@marvell.com> Signed-off-by:
Bing Zhao <bzhao@marvell.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Forest Bond authored
commit f1b00f4d upstream. Commit d83579e2 incorporated some changes from the vendor driver that made it newly important that the calculated hardware version correctly include the CHIP_92D bit, as all of the IS_92D_* macros were changed to depend on it. However, this bit was being unset for dual-mac, dual-phy devices. The vendor driver behavior was modified to not do this, but unfortunately this change was not picked up along with the others. This caused scanning in the 2.4GHz band to be broken, and possibly other bugs as well. This patch brings the version calculation logic in parity with the vendor driver in this regard, and in doing so fixes the regression. However, the version calculation code in general continues to be largely incoherent and messy, and needs to be cleaned up. Signed-off-by:
Forest Bond <forest.bond@rapidrollout.com> Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
-
Larry Finger authored
commit 3ce4d85b upstream. In commit a7959c13, the USB part of rtlwifi was switched to convert _usb_read_sync() to using a preallocated buffer rather than one that has been acquired using kmalloc. Although this routine is named as though it were synchronous, there seem to be simultaneous users, and the selection of the index to the data buffer is not multi-user safe. This situation is addressed by adding a new spinlock. The routine cannot sleep, thus a mutex is not allowed. Signed-off-by:
-
Cloud Ren authored
commit fa0afcd1 upstream. When io access mode is enabled by BOOTROM or BIOS for AR8152 v2.1, the register can't be read/write by memory access mode. Clearing Bit 8 of Register 0x21c could fixed the issue. Signed-off-by:
Cloud Ren <cjren@qca.qualcomm.com> Signed-off-by:
xiong <xiong@qca.qualcomm.com> Signed-off-by:
-
Meenakshi Venkataraman authored
commit a35e2708 upstream. We missed passing an argument to the debug print. Fix it. Signed-off-by:
Meenakshi Venkataraman <meenakshi.venkataraman@intel.com> Reviewed-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Ilan Peer authored
commit e19ebcab upstream. It is possible that the BSS context is not active (for example when the current mode is set to GO), or that the vif->type is different than station. In such a case we cannot call mac80211 to report the average rssi for the interface (the function assumes that the vif is valid and that the type is station). Reported-by:
Daniel J Blueman <daniel@quora.org> Reviewed-by:
Ilan Peer <ilan.peer@intel.com> Signed-off-by:
-
Eliad Peller authored
commit dac211ec upstream. ieee80211_rx_mgmt_auth() doesn't handle denied authentication properly - it authenticates the station and waits for association (for 5 seconds) instead of failing the authentication. Fix it by destroying auth_data and bailing out instead. Signed-off-by:
Eliad Peller <eliad@wizery.com> Acked-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
-
Christian Lamparter authored
commit 353d09c6 upstream. ieee802_1d_to_ac is defined as a const int[8], but the tid parameter has a range from 0 to 15. Signed-off-by:
Christian Lamparter <chunkeey@googlemail.com> Signed-off-by:
-
Johannes Berg authored
commit 097b0e1b upstream. b43 with open firmware crashes mac80211 because it changes the number of queues at runtime which, while it was never really supported, now crashes mac80211 due to the new hardware queue logic. Fix this by detecting open vs. proprietary fw earlier and registering with mac80211 with the right number of queues. Tested-by:
Stefan Lippers-Hollmann <s.l-h@gmx.de> Signed-off-by:
-
Johannes Berg authored
commit a6f38ac3 upstream. Larry (and some others I think) reported that with single-queue drivers mac80211 crashes when waking the queues. This happens because we allocate just a single queue for each virtual interface in case the driver doesn't have at least 4 queues, but the code stopping/waking the virtual interface queues wasn't taking this into account. Reported-by:
-
Mikulas Patocka authored
commit b09e786b upstream. This patch fixes a crash tun_chr_close -> netdev_run_todo -> tun_free_netdev -> sk_release_kernel -> sock_release -> iput(SOCK_INODE(sock)) introduced by commit 1ab5ecb9 The problem is that this socket is embedded in struct tun_struct, it has no inode, iput is called on invalid inode, which modifies invalid memory and optionally causes a crash. sock_release also decrements sockets_in_use, this causes a bug that "sockets: used" field in /proc/*/net/sockstat keeps on decreasing when creating and closing tun devices. This patch introduces a flag SOCK_EXTERNALLY_ALLOCATED that instructs sock_release to not free the inode and not decrement sockets_in_use, fixing both memory corruption and sockets_in_use underflow. It should be backported to 3.3 an 3.4 stabke. Signed-off-by:
Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz> Signed-off-by:
-
Rajiv Andrade authored
commit 24ebe667 upstream. tpm_do_selftest() attempts to read a PCR in order to decide if one can rely on the TPM being used or not. The function that's used by __tpm_pcr_read() does not expect the TPM to be disabled or deactivated, and if so, reports an error. It's fine if the TPM returns this error when trying to use it for the first time after a power cycle, but it's definitely not if it already returned success for a previous attempt to read one of its PCRs. The tpm_do_selftest() was modified so that the driver only reports this return code as an error when it really is. Reported-and-tested-by:
Paul Bolle <pebolle@tiscali.nl> Signed-off-by:
Rajiv Andrade <srajiv@linux.vnet.ibm.com> Signed-off-by:
-
Colin Cross authored
commit 064b021f upstream. Commit cf579dfb (PM / Sleep: Introduce "late suspend" and "early resume" of devices) introduced a bug where suspend_late handlers would be called, but if dpm_suspend_noirq returned an error the early_resume handlers would never be called. All devices would end up on the dpm_late_early_list, and would never be resumed again. Fix it by calling dpm_resume_early when dpm_suspend_noirq returns an error. Signed-off-by:
Colin Cross <ccross@android.com> Signed-off-by:
-
Rafael J. Wysocki authored
commit 11388c87 upstream. Require processes wanting to use the wake_lock/wake_unlock sysfs files to have the CAP_BLOCK_SUSPEND capability, which also is required for the eventpoll EPOLLWAKEUP flag to be effective, so that all interfaces related to blocking autosleep depend on the same capability. Signed-off-by:
Michael Kerrisk <mtk.man-pages@gmail.com> Signed-off-by:
-
Srivatsa S. Bhat authored
commit 443772d4 upstream. If function tracing is enabled for some of the low-level suspend/resume functions, it leads to triple fault during resume from suspend, ultimately ending up in a reboot instead of a resume (or a total refusal to come out of suspended state, on some machines). This issue was explained in more detail in commit f42ac38c (ftrace: disable tracing for suspend to ram). However, the changes made by that commit got reverted by commit cbe2f5a6 (tracing: allow tracing of suspend/resume & hibernation code again). So, unfortunately since things are not yet robust enough to allow tracing of low-level suspend/resume functions, suspend/resume is still broken when ftrace is enabled. So fix this by disabling function tracing during suspend/resume & hibernation. Signed-off-by:
Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by:
-
J. Bruce Fields authored
commit 0ec4f431 upstream. The only checks of the long argument passed to fcntl(fd,F_SETLEASE,.) are done after converting the long to an int. Thus some illegal values may be let through and cause problems in later code. [ They actually *don't* cause problems in mainline, as of Dave Jones's commit 8d657eb3 "Remove easily user-triggerable BUG from generic_setlease", but we should fix this anyway. And this patch will be necessary to fix real bugs on earlier kernels. ] Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Tony Luck authored
commit 6751ed65 upstream. In commit dad1743e ("x86/mce: Only restart instruction after machine check recovery if it is safe") we fixed mce_notify_process() to force a signal to the current process if it was not restartable (RIPV bit not set in MCG_STATUS). But doing it here means that the process doesn't get told the virtual address of the fault via siginfo_t->si_addr. This would prevent application level recovery from the fault. Make a new MF_MUST_KILL flag bit for memory_failure() et al. to use so that we will provide the right information with the signal. Signed-off-by:
Tony Luck <tony.luck@intel.com> Acked-by:
Borislav Petkov <borislav.petkov@amd.com> Signed-off-by:
-
Borislav Petkov authored
commit c9fc3f77 upstream. Microcode reloading in a per-core manner is a very bad idea for both major x86 vendors. And the thing is, we have such interface with which we can end up with different microcode versions applied on different cores of an otherwise homogeneous wrt (family,model,stepping) system. So turn off the possibility of doing that per core and allow it only system-wide. This is a minimal fix which we'd like to see in stable too thus the more-or-less arbitrary decision to allow system-wide reloading only on the BSP: $ echo 1 > /sys/devices/system/cpu/cpu0/microcode/reload ... and disable the interface on the other cores: $ echo 1 > /sys/devices/system/cpu/cpu23/microcode/reload -bash: echo: write error: Invalid argument Also, allowing the reload only from one CPU (the BSP in that case) doesn't allow the reload procedure to degenerate into an O(n^2) deal when triggering reloads from all /sys/devices/system/cpu/cpuX/microcode/reload sysfs nodes simultaneously. A more generic fix will follow. Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by:
H. Peter Anvin <hpa@zytor.com> Signed-off-by:
-
David Henningsson authored
commit 108cc108 upstream. Also add a model/fixup string "lenovo-dock", so that other Thinkpad users will be able to test this fixup easily, to see if it enables dock I/O for them as well. BugLink: https://bugs.launchpad.net/bugs/1026953Tested-by:
John McCarron <john.mccarron@canonical.com> Signed-off-by:
David Henningsson <david.henningsson@canonical.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Sarah Sharp authored
commit 24971912 upstream. When a user runs `echo 0 > bConfigurationValue` for a USB 3.0 device, usb_disable_device() is called. This function disables all drivers, deallocates interfaces, and sets the device configuration value to 0 (unconfigured). With the new scheme to ensure that unconfigured devices have LPM disabled, usb_disable_device() must call usb_unlocked_disable_lpm() once it unconfigures the device. This commit should be backported to kernels as old as 3.5, that contain the commit 8306095f "USB: Disable USB 3.0 LPM in critical sections." Signed-off-by:
Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by:
-
