If an AFU has a hardware bug that causes it to acknowledge a context
terminate or remove while that context has outstanding transactions, it
is possible for the kernel to receive an interrupt for that context
after we have removed it from the context list.

The kernel will not be able to demultiplex the interrupt (or worse - if
we have already reallocated the process handle we could mis-attribute it
to the new context), and printed a big scary warning.

It did not acknowledge the interrupt, which would effectively halt
further translation fault processing on the PSL.

This patch makes the warning clearer about the likely cause of the issue
(i.e. hardware bug) to make it obvious to future AFU designers of what
needs to be fixed. It also prints out the process handle which can then
be matched up with hardware and software traces for debugging.

It also acknowledges the interrupt to the PSL with either an address
error or acknowledge, so that the PSL can continue with other
translations.
Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is no need of .owner field for driver using
module_platform_driver.
Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fixes following minor issues in code comments in coresight.h
- typo %s/enpoint/endpoint
- alignment of comment section for struct coresight_desc
- correction of comment for struct coresight_connection and
  struct coresight_device.
Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fixes a typo %s/eveyone/everyone/ in function CS_UNLOCK.
Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Coresight IP blocks allow for the support of HW assisted tracing
on ARM SoCs.  Bindings for the currently available blocks are
presented herein.
Signed-off-by: Pratik Patel <pratikp@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1/ change request_module call to zero-pad single digit
   family numbers.  This appears to be the intention of
   the code, but not what it actually does.

   This means that the alias created for W1_FAMILY_SMEM_01
   might actually be useful.

2/ Define a family name for the BQ27000 battery charge monitor.
   Unfortunately this is the same number as W1_FAMILY_SMEM_01
   so if both a compiled on a system, one module might need to
   be blacklisted.

3/ Add a MODULE_ALIAS for the bq27000.
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: David Fries <David@Fries.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The struct cn_msg len field comes from userspace and needs to be
validated.  More logical to do so here where the cn_msg pointer is
pulled out of the sk_buff than the callback which is passed cn_msg *
and might assume no validation is needed.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: David Fries <David@Fries.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The interface is for applications that monitor
the fw health.

We use device_create_with_groups interface
to register attribute with the mei class device
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ME devices prior to PCH8 (Lynx Point) have two FW status registers,
on PCH8 and newer excluding txe there are six FW status registers.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Kill host_hw_status and me_hw_state from me hw structure that used
to cache host and me csr values.
We do not use the cached values across the function calls anymore
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Commit 783c8f4c ("soc/tegra: Add efuse driver for Tegra") added a
fuse directory in drivers/misc along with a Makefile that were never
used. They were leftovers from an earlier version of the patch series.
Reported-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

If num_ballooned is not 0, we shouldn't neglect the
already-partially-allocated 2MB memory block(s).
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Under high memory pressure and very high KVP R/W test pressure, the netlink
recvfrom() may transiently return ENOBUFS to the daemon -- we found this
during a 2-week stress test.

We'd better not terminate the daemon on the failure, because a typical KVP
user will re-try the R/W and hopefully it will succeed next time.

We can also ignore the errors on sending.

Cc: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Instead of making a list of exceptions for readonly filesystems
in addition to iso9660 we already have it is better to skip freeze
operation for all readonly-mounted filesystems.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Acked-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When ioctl(fd, FIFREEZE, 0) results in an error we cannot report it
to syslog instantly since that can cause write to a frozen disk.
However, the name of the filesystem which caused the error and errno
are valuable and we would like to get a nice human-readable message
in the log. Save errno before calling vss_operate(VSS_OP_THAW) and
report the error right after.

Unfortunately, FITHAW errors cannot be reported the same way as we
need to finish thawing all filesystems before calling syslog().

We should also avoid calling endmntent() for the second time in
case we encountered an error during freezing of '/' as it usually
results in SEGSEGV.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Acked-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

If we fail to send a message to userspace daemon with cn_netlink_send()
there is no need to wait for userspace to reply as it is not going to
happen. This happens when kvp or vss daemon is stopped after a successful
handshake. Report HV_E_FAIL immediately and cancel the timeout job so
host won't receive two failures.
Use pr_warn() for VSS and pr_debug() for KVP deliberately as VSS request
are rare and result in a failed backup. KVP requests are much more frequent
after a successful handshake so avoid flooding logs. It would be nice to
have an ability to de-negotiate with the host in case userspace daemon gets
disconnected so we won't receive new requests. But I'm not sure it is
possible.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In contrast with KVP there is no timeout when communicating with
userspace VSS daemon. In case it gets stuck performing freeze/thaw
operation no message will be sent to the host so it will take very
long (around 10 minutes) before backup fails. Introduce 10 second
timeout using schedule_delayed_work().
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'extcon-next-for-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into char-misc-testing

Update extcon for v3.19

This patchset fix minor issue of extcon driver.

Detailed description for patchset:
- Fix typo and change jig cable name of extcon-max77693.c
- Update the extcon_get_edev_by_phandle() because previous extcon_get_edev_by_phandle()
  considered the platform device driver. So, this modification supports
  OF-based extcon lookup method by using the list of extcon devices.

Fix a typo in name of company in copyright comment.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>

When JIG was set to "boot on" mode, the UART connection did not work
because it was assigned to Dock-Car cable (path: audio), not JIG-UART-ON
cable.

This was introduced in 39bf369e ("extcon: max77693: Add support dock
device and buttons") while adding dock features.

Assign the JIG-UART-ON back to UART path.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
[cw00.choi: Modify the patch name to remove specific board name]
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>

Platform bus is not the only way to have extcon devices, so current
implementation of of_extcon_get_extcon_dev() is broken. Also using
parent device node only to get device name is quite ugly.

This patch reimplements of_extcon_get_extcon_dev() to do exactly the
same as extcon_get_extcon_dev() but instead of comparing names, compare
node pointers.
Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com>
[mszyprow: simplified the code]
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>

This reverts commit 32eca221.

Changing core kernel code to operate in a different manner, without a
build-time breakage is tough to do and ensure you got it right.  There
are lots of problems popping up due to this change, so let's revert it
for now as it is not safe to merge to the tree at this point in time.

Cc: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit 2bfeeca1.

Not needed after the next patch is applied.

Cc: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit 965ab29b.

This is causing way more problems than it is worth.

Cc: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch improves the detection of defects by updating the
regular expression to find Kconfig identifiers in the source
code, and fixes some cases of false positives. The following
changes are made:
- improve regex to find Kconfig identifiers in the source
- exclude .log files from analysis
- improve filtering of false positives (e.g, CONFIG_XXX)
- change output format from (feature:\tlist) to (feature\tlist)
Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Removing minimal support for etb/etm to favour an implementation
that is more flexible, extensible and capable of handling more
platforms.

Also removing the only client of the old driver.  That code can
easily be replaced by entries for etb/etm in the device tree.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Support for 16 PTMs, funnel, TPIU and replicator connected
to the ETB are included.
Signed-off-by: Xia Kaixu <kaixu.xia@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Support for the 2 PTMs, 3 ETMs, funnel, TPIU and replicator
connected to the ETB are included.  Proper handling of the
ITM and the replicator linked to it along with the CTIs
and SWO are not included.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Currently supporting ETM and ETB.  Support for TPIU
and SDTI are yet to be added.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Documentation containing an explanation on what the framework
provides and the drivers working with it.  A minimal example
on how to use the functionality is also provided.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver manages CoreSight ETM (Embedded Trace Macrocell) that
supports processor tracing. Currently supported version are ARM
ETMv3.x and PTM1.x.
Signed-off-by: Pratik Patel <pratikp@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>

coresight-etm3x: adding missing error checking
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver manages non-configurable CoreSight Replicator that
takes a single input trace data stream and replicates it to
produce two identical trace data output streams. Replicators
are typically used to route single interleaved trace data
stream to two or more sinks.
Signed-off-by: Pratik Patel <pratikp@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver manages CoreSight Funnel which acts as a link.
Funnels have multiple input ports (typically 8) each of which
represents an input trace data stream. These multiple input trace
data streams are interleaved into a single output stream coming
out of the Funnel.
Signed-off-by: Pratik Patel <pratikp@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver manages CoreSight ETB (Embedded Trace Buffer) which
acts as a circular buffer sink collecting generated trace data.
Signed-off-by: Pratik Patel <pratikp@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver manages CoreSight TPIU (Trace Port Interface Unit)
which acts as a sink. TPIU is typically connected to some offchip
hardware hosting a storage buffer.
Signed-off-by: Pratik Patel <pratikp@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver manages CoreSight TMC (Trace Memory Controller) which
can act as a link or a sink depending upon its configuration. It
can present itself as an ETF (Embedded Trace FIFO) or ETR
(Embedded Trace Router).

ETF when configured in circular buffer mode acts as a trace
collection sink. When configured in HW fifo mode it acts as link.
ETR always acts as a sink and can be used to route data to memory
allocated in RAM.
Signed-off-by: Pratik Patel <pratikp@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

CoreSight components are compliant with the ARM CoreSight
architecture specification and can be connected in various
topologies to suit a particular SoC tracing needs. These trace
components can generally be classified as sources, links and
sinks. Trace data produced by one or more sources flows through
the intermediate links connecting the source to the currently
selected sink.

The CoreSight framework provides an interface for the CoreSight trace
drivers to register themselves with. It's intended to build up a
topological view of the CoreSight components and configure the
correct serie of components on user input via sysfs.

For eg., when enabling a source, the framework builds up a path
consisting of all the components connecting the source to the
currently selected sink(s) and enables all of them.

The framework also supports switching between available sinks
and provides status information to user space applications
through the debugfs interface.
Signed-off-by: Pratik Patel <pratikp@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>