Merge tag 'omap-for-v4.5/dt-pt1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt

Merge "Device tree changes for omaps for v4.5 merge window" from Tony Lindgren:

- Update all omaps to use pinctrl macros. This makes comparing the pinmux
  settings against the documentation much earlier. Javier compared the
  checksums of the generated dtb files to make sure nothing changed for
  the dtb files.

- Updates for dm816x

- Add GPMC DMA channels for am437x

- Updates for LogicPD Torpedo

- Basic support for CompuLab cm-t335

- Remove tps65217.dtsi file, we're better off adding SoC generic board
  dtsi files for the common features

- Add support for ELM on am33xx

- Add support for Bosch shc c3 board

- Add qspi aliases for am437x and dra7

- Wake-up support for dra7-evm uart1

- Basic support for CompuLab sbc-t43

- Basic support for CompuLab cl-som-am57x

- Use MMC pwrseq for libertas WLAN on igep0020 and igep0030

* tag 'omap-for-v4.5/dt-pt1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (97 commits)
  ARM: dts: omap3-igep0030: Use MMC pwrseq to init SDIO WiFi
  ARM: dts: omap3-igep0020: Use MMC pwrseq to init SDIO WiFi
  ARM: dts: am57xx: cl-som-am57x: skip resetting ETH PHYs
  ARM: dts: am57xx: sbc-am57x: add HDMI support
  ARM: dts: am57xx: compulab-sb-som: add HDMI connector
  ARM: dts: am57xx: sbc-am57x: add LCD support
  ARM: dts: am57xx: sbc-am57x: add GPIO expander support
  ARM: dts: am57xx: sbc-am57x: add EEPROM support
  ARM: dts: am57xx: sbc-am57x: add usb vbus pinmux
  ARM: dts: am57xx: cl-som-am57x: add MMC1 support
  ARM: dts: am57xx: sbc-am57x: add basic board support
  ARM: dts: am57xx: cl-som-am57x: add analog audio support
  ARM: dts: am57xx: cl-som-am57x: add touchscreen support
  ARM: dts: am57xx: cl-som-am57x: add USB support
  ARM: dts: am57xx: cl-som-am57x: add dual EMAC support
  ARM: dts: am57xx: cl-som-am57x: add spi-flash support
  ARM: dts: am57xx: cl-som-am57x: add eMMC support
  ARM: dts: am57xx: cl-som-am57x: add EEPROM support
  ARM: dts: am57xx: cl-som-am57x: add I2C3 support
  ARM: dts: am57xx: cl-som-am57x: dts: add RTC support
  ...

Merge "mvebu dt for 4.5 (part 2)" from Gregory CLEMENT:

- Fix Armada 388 GP dts
- Add clock related to PMU for Dove
- Add SolidRun Armada 388 Clearfog A1 dts

* tag 'mvebu-dt-4.5-2' of git://git.infradead.org/linux-mvebu:
  ARM: dts: Add SolidRun Armada 388 Clearfog A1 DT file
  dt-bindings: add Marvell PMU documentation
  ARM: dts: dove: add Dove divider clocks
  dt-bindings: add Marvell core PLL and clock divider PMU documentation
  ARM: mvebu: remove duplicated regulator definition in Armada 388 GP

Merge "mvebu dt for 4.5 (part 1)" from Gregory CLEMENT:

Update partition handling for ix4-300d

* tag 'mvebu-dt-4.5-1' of git://git.infradead.org/linux-mvebu:
  ARM: dt: mvebu: ix4-300d: Cleanup NAND partition ranges
  ARM: dt: mvebu: ix4-300d: move partitions to partition sub-node
  ARM: dt: mvebu: ix4-300d: remove whole flash partition

Merge "Marvell Berlin DT changes (round 1)" from Sebastian Hesselbarth:

- BG2Q cleanups (DMP eMMC, duplicated interrupt-parents)
- add BG2, BG2CD, BG2Q watchdog nodes
- add BG2Q DMP SDHCI1 nodes

* tag 'berlin-dt-for-4.5-1' of git://git.infradead.org/users/hesselba/linux-berlin:
  arm: dts: berlin2q-marvell-dmp: add sdhci1 fully functionality
  arm: dts: berlin2: add watchdog nodes
  arm: dts: berlin2cd: add watchdog nodes
  arm: dts: berlin2q: add watchdog nodes
  arm: dts: berlin2q: remove duplicated interrupt-parent
  arm: dts: berlin2q-marvell-dmp: remove broken-cd from eMMC node

Merge tag 'v4.5-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt

Merge "rockchip dts32 changes for 4.5" from Heiko Stuebner:

First round of arm devicetree changes.
Among the bigger changes are two new Veyron boards, support for
the dual-core cortex-a7 rk3036 soc and addition of support for
the crypto engine of the rk3288. Smaller changes include some
IR receivers, updates of thermal settings more reflecting real-
life and testing-results.

* tag 'v4.5-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  ARM: dts: rockchip: add gpio-ir-receiver to the R89 board
  ARM: dts: rockchip: add touchscreen node to veyron minnie
  ARM: dts: rockchip: add veyron-mickey board
  ARM: dts: rockchip: add veyron-brain board
  ARM: dts: rockchip: make sure edp_24m is associated to xin24m on veyron
  ARM: dts: rockchip: override thermal settings on veyron-speedy
  ARM: dts: rockchip: update the thermal management on rk3288
  ARM: dts: rockchip: Add Crypto node for rk3288
  ARM: dts: rockchip: add rk3036-evb board
  ARM: dts: rockchip: add core rk3036 dtsi
  clk: rockchip: add dt-binding header for rk3036
  clk: rockchip: add an id for rk3288 crypto clk
  ARM: dts: rockchip: Add IR receiver to RK3288 Radxa Rock 2 Square
  ARM: dts: rockchip: add channels properties for i2s
  ARM: dts: rockchip: set system-power-controller property on rk3288-rock2
  ARM: dts: rockchip: Setup rk3066/rk3188 ethernet0 alias for u-boot
  ARM: dts: rockchip: Setup rk3288 ethernet0 alias for u-boot

UniPhier SoCs (except PH1-sLD3) have several nodes in common.
Factor out them into uniphier-common32.dtsi.  This improves the code
maintainability.

PH1-sLD3 is so old that it has more or less different register maps
than the others.  So, it cannot be included in this refactoring.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The UART3 is assigned with IRQ 29 for old SoCs, IRQ 177 for new ones,
and PH1-Pro4 is on the boundary.

  PH1-sLD3: UART3 is unavailable
  PH1-LD4, PH1-sLD8: only IRQ 29 is supported
  PH1-Pro4: both IRQ 29 and 177 are supported
  PH1-Pro5, ProXstream2, PH1-LD6b: only IRQ 177 is supported

This SoC can choose either IRQ 29 or IRQ 177, but the former is shared
with another hardware (low speed serial0).  The latter is dedicated
for this hardware and more recommended.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'ux500-dt-for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into next/dt

Merge "Device Tree changes for Ux500" from Linus Walleij:

- Push the Rohm touchscreen to the STUIB, as the TVK UIB has
  a Synaptics RMI4 touchscreen.
- Set up the right sensor IRQs for the Snowball, so that
  periodic data ready-IRQ capture starts working.
- Use wakeup-source consequently.
- Remove legacy regulator-compatible strings.
- Define the sensors on the HREFP TVK board properly.

* tag 'ux500-dt-for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
  ARM: ux500: configure the sensors on the TVK board correctly
  ARM: u300: remove regulator-compatible usage
  ARM: ux500: remove regulator-compatible usage
  ARM: ux500: replace legacy *,wakeup property with wakeup-source
  ARM: ux500: Assign proper sensor IRQs for Snowball
  ARM: ux500: push down Rohm TS to STUIB

Merge tag 'renesas-dt2-for-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Merge "Second Round of Renesas ARM Based SoC DT Updates for v4.5" from Simon Horman:

* sh73a0, r8a7740: Add L2 cache-controller node
* r8a7791, r8a7794: remove deprecated #gpio-range-cells
* r8a7793: Add DU support and enable for VGA port
* r8a7790: switch console back to scif0
* alt: Correct ether and scif2 pinmux
* koelsch: Correct hdmi pinmux
* silk, lager, porter, bockw: Move SPI FLASH partitions to subnode
* bockw: Add schi0 pinmux

* tag 'renesas-dt2-for-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: sh73a0 dtsi: Add L2 cache-controller node
  ARM: shmobile: r8a7740 dtsi: Add L2 cache-controller node
  ARM: shmobile: alt: Correct ether pfc
  ARM: shmobile: alt: Correct scif2 pfc
  ARM: shmobile: silk: Move SPI FLASH partitions to subnode
  ARM: shmobile: lager: Move SPI FLASH partitions to subnode
  ARM: shmobile: porter: Move SPI FLASH partitions to subnode
  ARM: shmobile: bockw: Move SPI FLASH partition to subnode
  ARM: shmobile: r8a7791: koelsch: Fix pinmux for HDMI
  ARM: shmobile: r8a7794: remove deprecated #gpio-range-cells from dtsi
  ARM: shmobile: r8a7791: remove deprecated #gpio-range-cells from dtsi
  ARM: shmobile: r8a7793: Add DU node to device tree
  ARM: shmobile: r8a7794: alt: Enable PFC DU for the VGA port
  ARM: shmobile: bockw dts: define sdhi0 pins with pull-ups
  ARM: shmobile: r8a7790: switch console back to scif0

Merge tag 'renesas-dt-for-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Merge "Renesas ARM Based SoC DT Updates for v4.5" from Simon Horman:

* henninger: Remove as it is now replaced by silk
* koelsch: Move SPI partitions to subnode
* porter: Add CAN0 and HS-USB support
* r8a7793/gose: Add QSPI, PFC support
* r8a7793: Add GPIO, DMAC, theral, IPMMU support
* r8a7794/alt: Add DU support
* r8a7794: Disable all IPMMU nodes by default
* r8a779[0134]: Use Use SoC specific binding for rcar-dmac
* r8a779[01], r8a73a4, r8a7740, sh73a0: replace gpio-key, wakeup with
  wakeup-source property
* r8a779[14]: Correct "gpio-ranges" properties
* r8a779[14]: Remove bogus imp_clk node
* silk: Add SDHI1 support

* tag 'renesas-dt-for-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (29 commits)
  ARM: shmobile: alt: add VIN0, ADV7180 DT support
  ARM: shmobile: alt: add I2C1 DT support
  ARM: shmobile: alt: Add pfc pins to DT
  ARM: shmobile: r8a7794: Use SoC specific binding for rcar-dmac nodes
  ARM: shmobile: r8a7793: Use SoC specific binding for rcar-dmac nodes
  ARM: shmobile: r8a7791: Use SoC specific binding for rcar-dmac nodes
  ARM: shmobile: r8a7790: Use SoC specific binding for rcar-dmac nodes
  ARM: shmobile: r8a7793: Add GPIO nodes to device tree
  ARM: shmobile: r8a7794: alt: Enable VGA port
  ARM: shmobile: r8a7794: Add DU node to device tree
  ARM: shmobile: r8a7794: Add DU0 clock
  ARM: shmobile: gose: Add QSPI device to DT
  ARM: shmobile: r8a7793: Add QSPI device to DT
  ARM: shmobile: r8a7793: Add DMAC devices to DT
  ARM: shmobile: koelsch: Move SPI FLASH partitions to subnode
  ARM: shmobile: gose: Configure PFC in DT
  ARM: shmobile: r8a7793: Add PFC to DT
  ARM: shmobile: r8a7793: Add thermal device to DT
  ARM: shmobile: henninger: remove board DT
  ARM: shmobile: porter: add CAN0 DT support
  ...

Merge LPC32xx DTS changes for v4.5 from Vladimir Zapolskiy:

Main changes in the series:
- Added description of the second PWM controller device
- Added External Memory Controller device tree node (Primecell PL175)
- Added device tree nodes for standard timer controllers
- USB controllers are grouped
- Various minor clean-ups needed for further development of LPC32xx

* 'lpc32xx-dts' of https://github.com/vzapolskiy/linux:
  arm: dts: lpc32xx: move USB controller subdevices into own device node
  arm: dts: lpc32xx: add device nodes for standard timers
  arm: dts: lpc32xx: add external memory controller device node
  arm: dts: ea3250/phy3250: specify phys memory offset for lpc32xx boards
  arm: dts: lpc32xx: add device node for the second pwm controller
  arm: dts: lpc32xx: add reg property to cpu device node
  arm: dts: lpc32xx: add labels to all defined peripheral nodes
  arm: dts: lpc32xx: change include syntax to be C preprocessor friendly

Add support for the SolidRun Armada 388 Clearfog A1 board.  This board
has an Armada 388 microsom, dedicated gigabit ethernet, six switched
gigabit ethernet ports, SFP cage, two Mini-PCIe/mSATA slots, a m.2 SATA
slot, and a MikroBUS connector to allow MikroBUS modules to be added.

This DT file adds support for all board facilities with the exception
of full SFP support.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

When the WiFi support was added to the IGEP0030 board, the MMC subsystem
did not provide a mechanism to define power sequence providers. So a DT
hack was used to toggle the WiFi chip reset and power down pins by using
fake fixed regulators whose enable GPIO was the GPIOs connected to these
pins.

But now the simple MMC power sequence provider can be used for this and
the workaround removed.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Enric Balletbo Serra <enric.balletbo@collabora.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

When the WiFi support was added to the IGEP0020 board, the MMC subsystem
did not provide a mechanism to define power sequence providers. So a DT
hack was used to toggle the WiFi chip reset and power down pins by using
fake fixed regulators whose enable GPIO was the GPIOs connected to these
pins.

But now the simple MMC power sequence provider can be used for this and
the workaround removed.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Enric Balletbo Serra <enric.balletbo@collabora.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Add the required DT binding documentation for the Marvell PMU driver.
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

Add the Dove divider clocks to the Dove dtsi file.
Acked-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

Add documentation for the Marvell clock divider driver, which is used
to source clocks for the AXI bus, video decoder, GPU and LCD blocks.
Acked-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

The Armada 388 GP Device Tree file describes two times a regulator
named 'reg_usb2_1_vbus', with the exact same description. This has
been wrong since Armada 388 GP support was introduced.

Fixes: 928413bd ("ARM: mvebu: Add Armada 388 General Purpose Development Board support")
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: <stable@vger.kernel.org> # v4.0+
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

The sdhci1 on Marvell BG2Q DMP board is used as sdcard interface, we
have gpios for card detection, write-protect, vqmmc and vmmc.

This patch adds pinmux for this sdcard interface, then adds regulators
for vmmc and vqmmc, lastly adds cd-gpios, wp-gpios properties.
Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>

Add support for the IR receiver present on the R89 board.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

ETH PHYs setup on CL-SOM-AM57X is established in U-Boot along with
bringing them out of reset. This is done by toggling GPIOs belonging
to GPIO2/3 controllers on AM57xx.

Skip resetting ETH PHYs, by adding "ti,no-reset-on-init" to GPIO2/3
controllers DT nodes.
Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Add HDMI video output support.
Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Add HDMI connector node without a valid input endpoint.

CompuLab SB-SOM is a carrier board, hence the endpoint
should be added in the board DT with a valid HDMI output.
Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Startek-kd050c 800x480 LCD panel timings are described in
compulab-sb-som.dtsi.

Add appropriate DT endpoints to connect DPI output and LCD.
Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Add PCA9555 GPIO expander support (over I2C5 bus).
Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Tony Lindgren <tony@atomide.com>

On-board EEPROM chip is used for storing a board production info.

Add carrier board EEPROM support (over I2C5 bus).
Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il>
Signed-off-by: Tony Lindgren <tony@atomide.com>

usb1_drvvbus pin is used to Drive-VBUS enable to external charge
pump/power switch.

Add a pinmux for that pin.
Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Add MMC1 support, used for SD/MMC card.
Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Tony Lindgren <tony@atomide.com>

SBC-AM57x is a single board computer designed for industrial and
embedded applications. It is based on the Texas Instruments Sitara AM57x
system-on-chip family. SBC-AM57x is implemented with the CL-SOM-AM57x
computer-on-module providing most of the functions, and SB-SOM-AM57x
carrier board providing additional peripheral functions and connectors.

https://www.compulab.co.il/products/sbcs/sbc-am57x-ti-am5728-am5718-single-board-computer/

https://www.compulab.co.il/products/computer-on-modules/cl-som-am57x-ti-am5728-am5718-system-on-module/

Add basic board support, including UART3, used as a serial console.
Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Add analog audio DT nodes:

1. simple-audio-card node
2. wm8731 codec node
3. MCASP3 pinmux
Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Add ADS7846 touchscreen support.
Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Add USB support.
Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Add dual EMAC support.
Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Tony Lindgren <tony@atomide.com>

On-board spi-flash chip is used as a main boot device.
Add spi-flash chip support (over QSPI bus).
Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Tony Lindgren <tony@atomide.com>

CM-SOM-AM57X has two options of main storage devices - eMMC or NAND.
Add eMMC chip support (over MMC2 bus).
Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Tony Lindgren <tony@atomide.com>

On-board EEPROM chip is used for storing a board production
info.

Add module EEPROM support (over I2C4 bus).
Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Enable I2C3 bus and add appropriate pinmux.
Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Add EM3027 RTC chip support (over I2C4 bus).
Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Add support for CompuLab CM-SOM-AM57X board.

CL-SOM-AM57x is a miniature System-on-Module (SoM) based on
TI Sitara AM57x ARM Cortex-A15 System-on-Chip family.

https://www.compulab.co.il/products/computer-on-modules/cl-som-am57x-ti-am5728-am5718-system-on-module/

Add basic DT support for standalone module (without a carrier board):

* Memory configuration
* Heartbeat led
* I2C1 and I2C4
* PMIC
* SATA
Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Add the necessary dss configuration to drive the startek lcd on CompuLab
sbc-t43 single board computer.
Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Benoit Cousson <bcousson@baylibre.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Cc: Dmitry Lifshitz <lifshitz@compulab.co.il>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>