- 01 May, 2017 4 commits
-
-
Hans de Goede authored
It is sensible to assume that the hardware actually always has a way of charging the battery so when power_supply_am_i_supplied does not find any suppliers, that does not mean that there are none, but simply that no power_supply-drivers are registered / bound for any suppliers for the supply calling power_supply_am_i_supplied. At which point a fuel-gauge driver calling power_supply_am_i_supplied() cannot determine whether the battery is being charged or not. Allow a caller of power_supply_am_i_supplied to differentiate between there not being any suppliers, vs no suppliers being online by returning -ENODEV if there are no suppliers matching supplied_to / supplied_from, which allows fuel-gauge drivers to return POWER_SUPPLY_STATUS_UNKNOWN rather then POWER_SUPPLY_STATUS_DISCHARGING if there are no suppliers. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Reviewed-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
Sebastian Reichel <sebastian.reichel@collabora.co.uk>
-
H. Nikolaus Schaller authored
We can't assume that the battery is or stays present after probing on devices with replaceable battery. On some devices (e.g. GTA04 or OpenPanodra) it can be removed and even be hot swapped by the user while device continues to operate through external AC or USB power (as long as system power consumption remains below ca. 500mA as provided by USB). Under certain conditions it is possible to boot without battery. So it makes no sense to check for this situation during probe and make the charger driver (and its status reports) completely non-operational if the battery can be inserted later. Tested on: GTA04 and OpenPandora. Signed-off-by:
H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by:
-
H. Nikolaus Schaller authored
Currently, the twl4030 charger defines its own max_current by directly creating sysfs nodes. It should use the input_current_limit property which is e.g. used by the bq24257 driver. This patch adds the input_current_property with the same semantics as the max_current property. The code to manage the max_current property is removed by a separate patch. Signed-off-by:
-
Hans de Goede authored
Allow platform-code to disable the reset on probe and suspend/resume by setting a "disable-reset" boolean device property on the device. There are several reasons why the platform-code may want to disable the reset on probe and suspend/resume: 1) Resetting the charger should never be necessary it should always have sane values programmed. If it is running with invalid values while we are not running (system turned off or suspended) there is a big problem as that may lead to overcharging the battery. 2) The reset in suspend() is meant to put the charger back into default mode, but this is not necessary and not a good idea. If the charger has been programmed with a higher max charge_current / charge_voltage then putting it back in default-mode will reset those to the safe power-on defaults, leading to slower charging, or charging to a lower voltage (and thus not using the full capacity) while suspended which is undesirable. Reprogramming the max charge_current / charge_voltage after the reset will not help here as that will put the charger back in host mode and start the i2c watchdog if the host then does not do anything for 40s (iow if we're suspended for more then 40s) the watchdog expires resetting the device to default-mode, including resetting all the registers to there safe power-on defaults. So the only way to keep using custom charge settings while suspending is to keep the charger in its normal running state with the i2c watchdog disabled. This is fine as the charger will still automatically switch from constant current to constant voltage and stop charging when the battery is full. 3) Besides never being necessary resetting the charger also causes problems on systems where the charge voltage limit is set higher then the reset value, if this is the case and the charger is reset while charging and the battery voltage is between the 2 voltages, then about half the time the charger gets confused and claims to be charging (REG08 contains 0x64) but in reality the charger has decoupled itself from VBUS (Q1 off) and is drawing 0A from VBUS, leaving the system running from the battery. This last problem is happening on a GPD-win mini PC with a bq24292i charger chip combined with a max17047 fuel-gauge and a LiHV battery. I've checked and TI does not list any errata for the bq24292i which could explain this (there are no errata at all). Cc: Liam Breck <kernel@networkimprov.net> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by:
Liam Breck <kernel@networkimprov.net> Signed-off-by:
-
- 13 Apr, 2017 29 commits
-
-
Hans de Goede authored
When I submitted the extcon handling I had a patch pending for the extcon sub-system for extcon_register_notifier to take -1 as cable id for listening for all type cable events on an extcon with a single notifier. In the end it was decided to instead add a new extcon_register_notifier_all function for this, switch to using this. Signed-off-by:
Sebastian Reichel <sre@kernel.org>
-
Sebastian Reichel authored
-
Liam Breck authored
On chip reset, polling loop used udelay(10) which is too short to be useful. Instead, use usleep_range(100, 200). Signed-off-by:
Tony Lindgren <tony@atomide.com> Acked-by:
-
Liam Breck authored
On pm_runtime_get() failure, always emit an error message. Prevent unbalanced pm_runtime_get by calling: pm_runtime_put_noidle() in irq handler pm_runtime_put_sync() on any probe() failure Rename probe() out labels instead of renumbering them. Fixes: 13d6fa8447fa ("power: bq24190_charger: Use PM runtime autosuspend") Signed-off-by: -
Liam Breck authored
Polishing and fixes for initial extcon patch. Fixes: 4db249b6f3b4 ("power: supply: bq24190_charger: Use extcon to determine ilimit, 5v boost") Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: -
Liam Breck authored
If the charger is unplugged before the battery is full we may see an over/under voltage fault. Ignore this rather then emitting a message or uevent. This fixes messages like these getting logged on charger unplug + replug: bq24190-charger 15-006b: Fault: boost 0, charge 1, battery 0, ntc 0 bq24190-charger 15-006b: Fault: boost 0, charge 0, battery 0, ntc 0 Cc: Tony Lindgren <tony@atomide.com> Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
David Lechner authored
This adds a new driver for the LEGO MINDSTORMS EV3 battery. The EV3 is an embedded ARM device that can use 6 AA batteries or a special rechargeable Li-ion battery pack. The rechargeable battery pack presses a special key switch in the battery compartment to indicate that it is present. The EV3 is only capable of monitoring battery voltage and current. The charging circuit is built into the rechargeable battery pack and there is no way to communicate with is, so we can't provide any information about charging status. When not using the rechargeable battery pack, it is most common to use alkaline batteries to power the device, but it is also common for people to use rechargeable NiMH batteries. Since there is not a way to automatically differentiate between these, the technology property is made writable. Signed-off-by:
David Lechner <david@lechnology.com> Signed-off-by:
-
David Lechner authored
This add a new device tree binding for LEGO MINDSTORMS EV3 battery. The EV3 has some built-in capability for monitoring the attached battery. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Enric Balletbo i Serra authored
Equivalent information can be nowadays obtained using function tracer. Signed-off-by:
Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by:
-
Javier Martinez Canillas authored
The driver doesn't have a struct of_device_id table but supported devices are registered via Device Trees. This is working on the assumption that a I2C device registered via OF will always match a legacy I2C device ID and that the MODALIAS reported will always be of the form i2c:<device>. But this could change in the future so the correct approach is to have an OF device ID table if the devices are registered via OF. Signed-off-by:
Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by:
-
Javier Martinez Canillas authored
The DT binding document for LTC2941 and LTC2943 battery gauges did not use a vendor prefix in the listed compatible strings. The driver says that the manufacturer is Linear Technology which is "lltc" in vendor-prefixes.txt. There isn't an upstream Device Tree source file that has nodes defined for these devices, so there's no need to keep the old compatible strings. Signed-off-by:
-
Andi Shyti authored
Some trivial improvements on the returning value of the functions: - remove unnecessary goto labels that just return, return immediately, instead. - do not initialize when not needed. - return the value from the calling function that fails instead of politically choosing -EINVAL. Signed-off-by:
Andi Shyti <andi@etezian.org> Signed-off-by:
-
Giedrius Statkevičius authored
val might become 7 in which case stime[7] (array of length 7) would be accessed during the scnprintf call later and that will cause issues. Obviously, string concatenation is not intended here so just a comma needs to be added to fix the issue. Fixes: 98a27664 ("power_supply: Add new lp8788 charger driver") Signed-off-by:
Giedrius Statkevičius <giedrius.statkevicius@gmail.com> Acked-by:
Milo Kim <milo.kim@ti.com> Signed-off-by:
-
Tony Lindgren authored
The custom CPCAP PMIC used on Motorola phones such as Droid 4 has a USB battery charger. It can optionally also have a companion chip that is used for wireless charging. The charger on CPCAP also can feed VBUS for the USB host mode. This can be handled by the existing kernel phy_companion interface. Cc: devicetree@vger.kernel.org Cc: Marcel Partap <mpartap@gmx.net> Cc: Michael Scott <michael.scott@linaro.org> Signed-off-by:
-
Hans de Goede authored
Add support for monitoring an extcon device with USB SDP/CDP/DCP and HOST cables and adjust ilimit and enable/disable the 5V boost converter accordingly. This is necessary on systems where the PSEL pin is hardwired high and ILIM needs to be set by software based on the detected charger type, as well as on systems where the 5V boost converter is used, as that always needs to be enabled from software. Cc: Liam Breck <kernel@networkimprov.net> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Hans de Goede authored
The bq24192 and bq24192i are mostly identical to the bq24190, TI even published a single datasheet for all 3 of them. The difference between the bq24190 and bq24192[i] is the way charger-type detection is done, the bq24190 is to be directly connected to the USB a/b lines, where as the the bq24192[i] has a gpio which should be driven high/low externally depending on the type of charger connected, from a register level access pov there is no difference. The differences between the bq24192 and bq24192i are: 1) Lower default charge rate on the bq24192i 2) Pre-charge-current can be max 640 mA on the bq24192i On x86/ACPI systems the code which instantiates the i2c client may not know the exact variant being used, so instead of coding the model-id in the i2c_id struct and bailing if it does not match, check the reported model-id matches one of the supported variants. This commit only adds support for the bq24192i as I don't have a bq24192 to test with, adding support for the bq24192 should be as simple as also accepting its model-id in the model-id test. Cc: Liam Breck <kernel@networkimprov.net> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Hans de Goede authored
The i2c-core already maps of irqs before calling the driver's probe function and there are no in tree users of bq24190_platform_data->gpio_int. Remove the redundant custom irq-mapping code and just use client->irq. Cc: Liam Breck <kernel@networkimprov.net> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by:
-
Arnd Bergmann authored
Without CONFIG_PM, we get a harmless warning: drivers/power/supply/bq24190_charger.c:1514:12: error: 'bq24190_runtime_resume' defined but not used [-Werror=unused-function] drivers/power/supply/bq24190_charger.c:1501:12: error: 'bq24190_runtime_suspend' defined but not used [-Werror=unused-function] To avoid the warning, we can mark all four PM functions as __maybe_unused, which also lets us remove the incorrect #ifdef. Fixes: 3d8090cba638 ("power: bq24190_charger: Check the interrupt status on resume") Signed-off-by:Arnd Bergmann <arnd@arndb.de> Acked-by:
-
Daniel Perez authored
Signed-off-by:
Daniel Perez <danielperezdeandres@gmail.com> Signed-off-by:
-
Munir Contractor authored
This patch fixes 4 checkpatch.pl errors on lines 433 to 436: ERROR: code indent should use tabs where possible Signed-off-by:
Munir Contractor <munircontractor@gmail.com> Signed-off-by:
-
Andy Shevchenko authored
Since index is always 0, replace gpiod_get_index() by gpiod_get(). Signed-off-by:
-
Enric Balletbo i Serra authored
Fix the max8925_batter typo in the file name. Signed-off-by:
-
Dmitry Torokhov authored
Even if bus is not hot-pluggable, the devices can be unbound from the driver via sysfs, so we should not be using __exit annotations on remove() methods. The only exception is drivers registered with platform_driver_probe() which specifically disables sysfs bind/unbind attributes. Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Linus Walleij authored
The Gemini (SL3516) SoC has a special power controller block that only deal with shutting down the system. If you do not register a driver and activate the block, the power button on the systems utilizing this SoC will do an uncontrolled power cut, which is why it is important to have a special poweroff driver. The most basic functionality is to just shut down the system by writing a special bit in the control register after the system has reached pm_poweroff. It also handles the poweroff from a button or other sources: When the poweroff button is pressed, or a signal is sent to poweroff from an infrared remote control, or when the RTC fires a special alarm (!) the system emits an interrupt. At this point, Linux must acknowledge the interrupt and proceed to do an orderly shutdown of the system. After adding this driver, pressing the poweroff button gives this dmesg: root@gemini:/ root@gemini:/ gemini-poweroff 4b000000.power-controller: poweroff button pressed calling shutdown scripts.. setting /dev/rtc0 from system time unmounting file systems... umount: tmpfs busy - remounted read-only umount: can't unmount /: Invalid argument The system is going down NOW! Sent SIGTERM to all processes Sent SIGKILL to all processes Requesting system poweroff uhci_hcd 0000:00:09.1: HCRESET not completed yet! uhci_hcd 0000:00:09.0: HCRESET not completed yet! reboot: Power down gemini-poweroff 4b000000.power-controller: Gemini power off Cc: Janos Laube <janos.dev@gmail.com> Cc: Paulius Zaleckas <paulius.zaleckas@gmail.com> Cc: Hans Ulli Kroll <ulli.kroll@googlemail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: linux-pm@vger.kernel.org Cc: Sebastian Reichel <sre@kernel.org> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Linus Walleij authored
This adds device tree bindings to the power management controller in the Gemini SoC. Cc: devicetree@vger.kernel.org Cc: Janos Laube <janos.dev@gmail.com> Cc: Paulius Zaleckas <paulius.zaleckas@gmail.com> Cc: Hans Ulli Kroll <ulli.kroll@googlemail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Acked-by:
-
Javier Martinez Canillas authored
The driver doesn't have a struct of_device_id table but supported devices are registered via Device Trees. This is working on the assumption that a I2C device registered via OF will always match a legacy I2C device ID and that the MODALIAS reported will always be of the form i2c:<device>. But this could change in the future so the correct approach is to have an OF device ID table if the devices are registered via OF. Signed-off-by:
-
Guy Shapiro authored
Make the syscon-poweroff driver accept value and mask instead of just value. Prior to this patch, the property name for the value was 'mask'. If only the mask property is defined on a node, maintain compatibility by using it as the value. Signed-off-by:
Guy Shapiro <guy.shapiro@mobi-wize.com> Acked-by:
-
Tony Lindgren authored
We can get quite a few interrupts when the battery is trickle charging. Let's enable PM runtime autosuspend to avoid constantly toggling device driver PM runtime state. Let's use a 600 ms timeout as that's how long the USB chager detection might take. Acked-by:
Mark Greer <mgreer@animalcreek.com> Acked-by:
-
Tony Lindgren authored
Some SoCs like omap3 can configure GPIO irqs to use Linux generic dedicated wakeirq support. If the dedicated wakeirq is configured, the SoC will use a always-on interrupt controller to produce wake-up events. If bq24190 is configured for dedicated wakeirq, we need to check the interrupt status on PM runtime resume. This is because the Linux generic wakeirq will call pm_runtime_resume() on the device on a wakeirq. And as the bq24190 interrupt is falling edge sensitive and only active for 250 us, there will be no device interrupt seen by the runtime SoC IRQ controller. Note that this can cause spurious interrupts on omap3 devices with bq24190 connected to gpio banks 2 - 5 as there's a glitch on those pins waking from off mode as listed in "Advisory 1.45". Devices with this issue should not configure the optional wakeirq interrupt in the dts file. Acked-by:
-
- 04 Apr, 2017 1 commit
-
-
Chanwoo Choi authored
The extcon core already provides the extcon_register_notifier() function in order to register the notifier block which is used to monitor the state change for the specific external connector such as EXTCON_USB, EXTCON_USB_HOST and so on. The extcon consumer uses the this function. The extcon consumer might need to monitor the all supported external connectors from the extcon device. In this case, The extcon consumer should have each notifier_block structure for each external connector. This patch adds the new extcon_register_notifier_all() function that extcon consumer is able to monitor the state change of all supported external connectors by using only one notifier_block structure. - List of new added functions: int extcon_register_notifier_all(struct extcon_dev *edev, struct notifier_block *nb); int extcon_unregister_notifier_all(struct extcon_dev *edev, struct notifier_block *nb); int devm_extcon_register_notifier_all(struct device *dev, struct extcon_dev *edev, struct notifier_block *nb); void devm_extcon_unregister_notifier_all(struct device *dev, struct extcon_dev *edev, struct notifier_block *nb); Suggested-by:
Chanwoo Choi <cw00.choi@samsung.com> Tested-by:
-
- 26 Mar, 2017 6 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc driver fixes from Greg KH: "A smattering of different small fixes for some random driver subsystems. Nothing all that major, just resolutions for reported issues and bugs. All have been in linux-next with no reported issues" * tag 'char-misc-4.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (21 commits) extcon: int3496: Set the id pin to direction-input if necessary extcon: int3496: Use gpiod_get instead of gpiod_get_index extcon: int3496: Add dependency on X86 as it's Intel specific extcon: int3496: Add GPIO ACPI mapping table extcon: int3496: Rename GPIO pins in accordance with binding vmw_vmci: handle the return value from pci_alloc_irq_vectors correctly ppdev: fix registering same device name parport: fix attempt to write duplicate procfiles auxdisplay: img-ascii-lcd: add missing sentinel entry in img_ascii_lcd_matches Drivers: hv: vmbus: Don't leak memory when a channel is rescinded Drivers: hv: vmbus: Don't leak channel ids Drivers: hv: util: don't forget to init host_ts.lock Drivers: hv: util: move waiting for release to hv_utils_transport itself vmbus: remove hv_event_tasklet_disable/enable vmbus: use rcu for per-cpu channel list mei: don't wait for os version message reply mei: fix deadlock on mei reset intel_th: pci: Add Gemini Lake support intel_th: pci: Add Denverton SOC support intel_th: Don't leak module refcount on failure to activate ...
-
Linus Torvalds authored
Merge tag 'driver-core-4.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fix from Greg KH: "Here is a single kernfs fix for 4.11-rc4 that resolves a reported issue. It has been in linux-next with no reported issues" * tag 'driver-core-4.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: kernfs: Check KERNFS_HAS_RELEASE before calling kernfs_release_file()
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty/serial driver fixes from Greg KH: "Here are some tty and serial driver fixes for 4.11-rc4. One of these fix a long-standing issue in the ldisc code that was found by Dmitry Vyukov with his great fuzzing work. The other fixes resolve other reported issues, and there is one revert of a patch in 4.11-rc1 that wasn't correct. All of these have been in linux-next for a while with no reported issues" * tag 'tty-4.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: fix data race in tty_ldisc_ref_wait() tty: don't panic on OOM in tty_set_ldisc() Revert "tty: serial: pl011: add ttyAMA for matching pl011 console" tty: acpi/spcr: QDF2400 E44 checks for wrong OEM revision serial: 8250_dw: Fix breakage when HAVE_CLK=n serial: 8250_dw: Honor clk_round_rate errors in dw8250_set_termios
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull IIO driver fixes from Greg KH: "Here are some small IIO driver fixes for 4.11-rc4 that resolve a number of tiny reported issues. All of these have been in linux-next for a while with no reported issues" * tag 'staging-4.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: iio: imu: st_lsm6dsx: fix FIFO_CTRL2 overwrite during watermark configuration iio: adc: ti_am335x_adc: fix fifo overrun recovery iio: sw-device: Fix config group initialization iio: magnetometer: ak8974: remove incorrect __exit markups iio: hid-sensor-trigger: Change get poll value function order to avoid sensor properties losing after resume from S3
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB/PHY fixes from Greg KH: "Here are a number of small USB and PHY driver fixes for 4.11-rc4. Nothing major here, just an bunch of small fixes, and a handfull of good fixes from Johan for devices with crazy descriptors. There are a few new device ids in here as well. All of these have been in linux-next with no reported issues" * tag 'usb-4.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (26 commits) usb: gadget: f_hid: fix: Don't access hidg->req without spinlock held usb: gadget: udc: remove pointer dereference after free usb: gadget: f_uvc: Sanity check wMaxPacketSize for SuperSpeed usb: gadget: f_uvc: Fix SuperSpeed companion descriptor's wBytesPerInterval usb: gadget: acm: fix endianness in notifications usb: dwc3: gadget: delay unmap of bounced requests USB: serial: qcserial: add Dell DW5811e usb: hub: Fix crash after failure to read BOS descriptor ACM gadget: fix endianness in notifications USB: usbtmc: fix probe error path USB: usbtmc: add missing endpoint sanity check USB: serial: option: add Quectel UC15, UC20, EC21, and EC25 modems usb: musb: fix possible spinlock deadlock usb: musb: dsps: fix iounmap in error and exit paths usb: musb: cppi41: don't check early-TX-interrupt for Isoch transfer usb-core: Add LINEAR_FRAME_INTR_BINTERVAL USB quirk uwb: i1480-dfu: fix NULL-deref at probe uwb: hwa-rc: fix NULL-deref at probe USB: wusbcore: fix NULL-deref at probe USB: uss720: fix NULL-deref at probe ...
-
