- 28 Jun, 2013 5 commits
-
-
Philipp Reisner authored
In case the connection was established and lost again before the a fence-peer handler returns, ignore the exit code of this instance. (And use the exit code of the later started instance) Signed-off-by:
Andreas Gruenbacher <agruen@linbit.com> Signed-off-by:
Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
Andreas Gruenbacher authored
Signed-off-by:
-
Wei Yongjun authored
Fix to return a negative error code from the error handling case instead of 0, as returned elsewhere in this function. Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by:
Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by:
-
Andreas Gruenbacher authored
Signed-off-by:
-
Jens Axboe authored
Merge branch 'stable/for-jens-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen into for-3.11/drivers Konrad writes: It has the 'feature-max-indirect-segments' implemented in both backend and frontend. The current problem with the backend and frontend is that the segment size is limited to 11 pages. It means we can at most squeeze in 44kB per request. The ring can hold 32 (next power of two below 36) requests, meaning we can do 1.4M of outstanding requests. Nowadays that is not enough. The problem in the past was addressed in two ways - but neither one went upstream. The first solution to this proposed by Justin from Spectralogic was to negotiate the segment size. This means that the ‘struct blkif_sring_entry’ is now a variable size. It can expand from 112 bytes (cover 11 pages of data - 44kB) to 1580 bytes (256 pages of data - so 1MB). It is a simple extension by just making the array in the request expand from 11 to a variable size negotiated. But it had limits: this extension still limits the number of segments per request to 255 (as the total number must be specified in the request, which only has an 8-bit field for that purpose). The other solution (from Intel - Ronghui) was to create one extra ring that only has the ‘struct blkif_request_segment’ in them. The ‘struct blkif_request’ would be changed to have an index in said ‘segment ring’. There is only one segment ring. This means that the size of the initial ring is still the same. The requests would point to the segment and enumerate out how many of the indexes it wants to use. The limit is of course the size of the segment. If one assumes a one-page segment this means we can in one request cover ~4MB. Those patches were posted as RFC and the author never followed up on the ideas on changing it to be a bit more flexible. There is yet another mechanism that could be employed (which these patches implement) - and it borrows from VirtIO protocol. And that is the ‘indirect descriptors’. This very similar to what Intel suggests, but with a twist. The twist is to negotiate how many of these 'segment' pages (aka indirect descriptor pages) we want to support (in reality we negotiate how many entries in the segment we want to cover, and we module the number if it is bigger than the segment size). This means that with the existing 36 slots in the ring (single page) we can cover: 32 slots * each blkif_request_indirect covers: 512 * 4096 ~= 64M. Since we ample space in the blkif_request_indirect to span more than one indirect page, that number (64M) can be also multiplied by eight = 512MB. Roger Pau Monne took the idea and implemented them in these patches. They work great and the corner cases (migration between backends with and without this extension) work nicely. The backend has a limit right now off how many indirect entries it can handle: one indirect page, and at maximum 256 entries (out of 512 - so 50% of the page is used). That comes out to 32 slots * 256 entries in a indirect page * 1 indirect page per request * 4096 = 32MB. This is a conservative number that can change in the future. Right now it strikes a good balance between giving excellent performance, memory usage in the backend, and balancing the needs of many guests. In the patchset there is also the split of the blkback structure to be per-VBD. This means that the spinlock contention we had with many guests trying to do I/O and all the blkback threads hitting the same lock has been eliminated. Also there are bug-fixes to deal with oddly sized sectors, insane amounts on th ring, and also a security fix (posted earlier).
-
- 25 Jun, 2013 1 commit
-
-
Roger Pau Monne authored
With the introduction of indirect segments we can receive requests with a number of segments bigger than the maximum number of allowed iovecs in a bios, so make sure that blkback doesn't try to allocate a bios with more iovecs than BIO_MAX_PAGES Signed-off-by:
Roger Pau Monné <roger.pau@citrix.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
- 21 Jun, 2013 2 commits
-
-
Roger Pau Monne authored
Now that indirect segments are enabled blk_queue_max_hw_sectors must be set to match the maximum number of sectors we can handle in a request. Signed-off-by:
Felipe Franciosi <felipe.franciosi@citrix.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
-
Roger Pau Monne authored
The code generat with gcc (GCC) 4.1.2 20080704 (Red Hat 4.1.2-54) creates an unbound loop for the second foreach_grant_safe loop in purge_persistent_gnt. The workaround is to avoid having this second loop and instead perform all the work inside the first loop by adding a new variable, clean_used, that will be set when all the desired persistent grants have been removed and we need to iterate over the remaining ones to remove the WAS_ACTIVE flag. Signed-off-by:
Tom O'Neill <toneill@vmem.com> Reported-by:
-
- 19 Jun, 2013 11 commits
-
-
Philip J Kelleher authored
Adding debugfs entries to help with debugging and testing and testing code. pci_regs: This entry will spit out all of the data stored on the BAR. stats: This entry will display all of the driver stats for each DMA channel. cram: This will allow read/write ability to the CRAM address space on our adapter's CPU. Signed-off-by:Philip J Kelleher <pjk1939@linux.vnet.ibm.com> Signed-off-by:
-
Philip J Kelleher authored
Fixing incorrect stats calculation during read retries. Signed-off-by:
-
Philip J Kelleher authored
Unfortunaly, our CPU register path does not do any kind of EEH error checking. So to fix this issue, an ioread32 was added to the CPU register timeout code. This way, the driver can check to see if the timeout was caused by an EEH error or not. This is a dummy read. Signed-off-by:
-
Philip J Kelleher authored
Adding a sanity check to guarentee that DMAs outside of the device's address space will be errored out right away. Signed-off-by:
-
Philip J Kelleher authored
A kernel panic would occur on a DLPAR add if there was a partition still mounted during the DLPAR remove. This bug fix will allow the user to unmount the partition and bring the driver back into a good state after the DLPAR add. Signed-off-by:
-
Philip J Kelleher authored
Changing the adapter name from FlashSystem-80 to the official name: Flash Adapter 900GB Full Height. Signed-off-by:
-
Philip J Kelleher authored
Before, the partition table would have to be reread because our card was attached before it transistioned out of it's 'starting' state. This change will cause the driver to wait to attach the device until the adapter is ready. Signed-off-by:
-
Philip J Kelleher authored
Previously, the block size was determined by whether or not our Hardware could handle 512 byte accesses. Now, all of our Hardware can handle 512 and 4096 block sizes. This fix allows it to be user configurable. Signed-off-by:
-
Philip J Kelleher authored
The workqueue mechanism has been reworked to prevent soft lockup issues from occuring by adding in mutex sychronization. Signed-off-by:
-
Philip J Kelleher authored
Before, DMAs would never be cancelled if there was a data stall or an EEH Permenant failure which would cause an unrecoverable I/O hang. The DMA cancellation mechanism has been modified to fix these issues and allows DMAs to be cancelled during the above mentioned events. Signed-off-by:
-
Philip J Kelleher authored
Giving all interrupt based events their own workqueue to complete tasks on. This fixes a bug that would cause creg commands to timeout if too many are issued at once. Signed-off-by:
-
- 17 Jun, 2013 2 commits
-
-
Konrad Rzeszutek Wilk authored
Check that the ring does not have an insane amount of requests (more than there could fit on the ring). If we detect this case we will stop processing the requests and wait until the XenBus disconnects the ring. The existing check RING_REQUEST_CONS_OVERFLOW which checks for how many responses we have created in the past (rsp_prod_pvt) vs requests consumed (req_cons) and whether said difference is greater or equal to the size of the ring, does not catch this case. Wha the condition does check if there is a need to process more as we still have a backlog of responses to finish. Note that both of those values (rsp_prod_pvt and req_cons) are not exposed on the shared ring. To understand this problem a mini crash course in ring protocol response/request updates is in place. There are four entries: req_prod and rsp_prod; req_event and rsp_event to track the ring entries. We are only concerned about the first two - which set the tone of this bug. The req_prod is a value incremented by frontend for each request put on the ring. Conversely the rsp_prod is a value incremented by the backend for each response put on the ring (rsp_prod gets set by rsp_prod_pvt when pushing the responses on the ring). Both values can wrap and are modulo the size of the ring (in block case that is 32). Please see RING_GET_REQUEST and RING_GET_RESPONSE for the more details. The culprit here is that if the difference between the req_prod and req_cons is greater than the ring size we have a problem. Fortunately for us, the '__do_block_io_op' loop: rc = blk_rings->common.req_cons; rp = blk_rings->common.sring->req_prod; while (rc != rp) { .. blk_rings->common.req_cons = ++rc; /* before make_response() */ } will loop up to the point when rc == rp. The macros inside of the loop (RING_GET_REQUEST) is smart and is indexing based on the modulo of the ring size. If the frontend has provided a bogus req_prod value we will loop until the 'rc == rp' - which means we could be processing already processed requests (or responses) often. The reason the RING_REQUEST_CONS_OVERFLOW is not helping here is b/c it only tracks how many responses we have internally produced and whether we would should process more. The astute reader will notice that the macro RING_REQUEST_CONS_OVERFLOW provides two arguments - more on this later. For example, if we were to enter this function with these values: blk_rings->common.sring->req_prod = X+31415 (X is the value from the last time __do_block_io_op was called). blk_rings->common.req_cons = X blk_rings->common.rsp_prod_pvt = X The RING_REQUEST_CONS_OVERFLOW(&blk_rings->common, blk_rings->common.req_cons) is doing: req_cons - rsp_prod_pvt >= 32 Which is, X - X >= 32 or 0 >= 32 And that is false, so we continue on looping (this bug). If we re-use said macro RING_REQUEST_CONS_OVERFLOW and pass in the rp instead (sring->req_prod) of rc, the this macro can do the check: req_prod - rsp_prov_pvt >= 32 Which is, X + 31415 - X >= 32 , or 31415 >= 32 which is true, so we can error out and break out of the function. Unfortunatly the difference between rsp_prov_pvt and req_prod can be at 32 (which would error out in the macro). This condition exists when the backend is lagging behind with the responses and still has not finished responding to all of them (so make_response has not been called), and the rsp_prov_pvt + 32 == req_cons. This ends up with us not being able to use said macro. Hence introducing a new macro called RING_REQUEST_PROD_OVERFLOW which does a simple check of: req_prod - rsp_prod_pvt > RING_SIZE And with the X values from above: X + 31415 - X > 32 Returns true. Also not that if the ring is full (which is where the RING_REQUEST_CONS_OVERFLOW triggered), we would not hit the same condition: X + 32 - X > 32 Which is false. Lets use that macro. Note that in v5 of this patchset the macro was different - we used an earlier version. Cc: stable@vger.kernel.org [v1: Move the check outside the loop] [v2: Add a pr_warn as suggested by David] [v3: Use RING_REQUEST_CONS_OVERFLOW as suggested by Jan] [v4: Move wake_up after kthread_stop as suggested by Jan] [v5: Use RING_REQUEST_PROD_OVERFLOW instead] [v6: Use RING_REQUEST_PROD_OVERFLOW - Jan's version] Signed-off-by:Jan Beulich <jbeulich@suse.com> gadsa
-
Jan Beulich authored
Backends may need to protect themselves against an insane number of produced requests stored by a frontend, in case they iterate over requests until reaching the req_prod value. There can't be more requests on the ring than the difference between produced requests and produced (but possibly not yet published) responses. This is a more strict alternative to a patch previously posted by Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>. Signed-off-by:
-
- 07 Jun, 2013 2 commits
-
-
Konrad Rzeszutek Wilk authored
We need to make sure that the device is not RO or that the request is not past the number of sectors we want to issue the DISCARD operation for. This fixes CVE-2013-2140. Cc: stable@vger.kernel.org Acked-by:
Ian Campbell <Ian.Campbell@citrix.com> [v1: Made it pr_warn instead of pr_debug] Signed-off-by:
-
Stefan Bader authored
Currently xen-blkback passes the logical sector size over xenbus and xen-blkfront sets up the paravirt disk with that logical block size. But newer drives usually have the logical sector size set to 512 for compatibility reasons and would show the actual sector size only in physical sector size. This results in the device being partitioned and accessed in dom0 with the correct sector size, but the guest thinks 512 bytes is the correct block size. And that results in poor performance. To fix this, blkback gets modified to pass also physical-sector-size over xenbus and blkfront to use both values to set up the paravirt disk. I did not just change the passed in sector-size because I am not sure having a bigger logical sector size than the physical one is valid (and that would happen if a newer dom0 kernel hits an older domU kernel). Also this way a domU set up before should still be accessible (just some tools might detect the unaligned setup). [v2: Make xenbus write failure non-fatal] [v3: Use xenbus_scanf instead of xenbus_gather] [v4: Rebased against segment changes] Signed-off-by:
Stefan Bader <stefan.bader@canonical.com> Signed-off-by:
-
- 04 Jun, 2013 2 commits
-
-
Konrad Rzeszutek Wilk authored
to a testing subdirectory (as this value should not be baked for the life-time) and also in an appropiate file. Also modified the introduction Linux version from 3.10 to 3.11. Signed-off-by: -
Konrad Rzeszutek Wilk authored
The max module parameter (by default 32) is the maximum number of segments that the frontend will negotiate with the backend for indirect descriptors. Higher value means more potential throughput but more memory usage. The backend picks the minimum of the frontend and its default backend value. Signed-off-by:
-
- 14 May, 2013 15 commits
-
-
Tejun Heo authored
With the recent updates, blk-throttle is finally ready for proper hierarchy support. Dispatching now honors service_queue->parent_sq and propagates correctly. The only thing missing is setting ->parent_sq correctly so that throtl_grp hierarchy matches the cgroup hierarchy. This patch updates throtl_pd_init() such that service_queues form the same hierarchy as the cgroup hierarchy if sane_behavior is enabled. As this concludes proper hierarchy support for blkcg, the shameful .broken_hierarchy tag is removed from blkio_subsys. v2: Updated blkio-controller.txt as suggested by Vivek. Signed-off-by:
Tejun Heo <tj@kernel.org> Acked-by:
Vivek Goyal <vgoyal@redhat.com> Cc: Li Zefan <lizefan@huawei.com>
-
Tejun Heo authored
blk_throtl_bio() has a quick exit path for throtl_grps without limits configured. It looks at the bps and iops limits and if both are not configured, the bio is issued immediately. While this is correct in the current flat hierarchy as each throtl_grp behaves completely independently, it would become wrong in proper hierarchy mode. A group without any limits could still be limited by one of its ancestors and bio's queued for such group should not bypass blk-throtl. As having a quick bypass mechanism is beneficial, this patch reimplements the mechanism such that it's correct even with proper hierarchy. throtl_grp->has_rules[] is added. These booleans are updated for the whole subtree whenever a config is updated so that has_rules[] of the whole subtree stays synchronized. They're also updated when a new throtl_grp comes online so that it can't escape the limits of its ancestors. As no throtl_grp has another throtl_grp as parent now, this patch doesn't yet make any behavior differences. Signed-off-by:
-
Vivek Goyal authored
With the planned proper hierarchy support, a bio will climb up the tree before actually being dispatched. This makes sure bio is also subjected to parent's throttling limits, if any. It might happen that parent is idle and when bio is transferred to parent, a new slice starts fresh. But that is incorrect as parents wait time should have started when bio was queued in child group and causes IOs to be throttled more than configured as they climb the hierarchy. Given the fact that we have not written hierarchical algorithm in a way where child's and parents time slices are synchronized, we transfer the child's start time to parent if parent was idling. If parent was busy doing dispatch of other bios all this while, this is not an issue. Child's slice start time is passed to parent. Parent looks at its last expired slice start time. If child's start time is after parents old start time, that means parent had been idle and after parent went idle, child had an IO queued. So use child's start time as parent start time. If parent's start time is after child's start time, that means, when IO got queued in child group, parent was not idle. But later it dispatched some IO, its slice got trimmed and then it went idle. After a while child's request got shifted in parent group. In this case use parent's old start time as new start time as that's the duration of slice we did not use. This logic is far from perfect as if there are multiple childs then first child transferring the bio decides the start time while a bio might have queued up even earlier in other child, which is yet to be transferred up to parent. In that case we will lose time and bandwidth in parent. This patch is just an approximation to make situation somewhat better. Signed-off-by:
-
Tejun Heo authored
With flat hierarchy, there's only single level of dispatching happening and fairness beyond that point is the responsibility of the rest of the block layer and driver, which usually works out okay; however, with the planned hierarchy support, service_queue->bio_lists[] can be filled up by bios from a single source. While the limits would still be honored, it'd be very easy to starve IOs from siblings or children. To avoid such starvation, this patch implements throtl_qnode and converts service_queue->bio_lists[] to lists of per-source qnodes which in turn contains the bio's. For example, when a bio is dispatched from a child group, the bio doesn't get queued on ->bio_lists[] directly but it first gets queued on the group's qnode which in turn gets queued on service_queue->queued[]. When dispatching for the upper level, the ->queued[] list is consumed in round-robing order so that the dispatch windows is consumed fairly by all IO sources. There are two ways a bio can come to a throtl_grp - directly queued to the group or dispatched from a child. For the former throtl_grp->qnode_on_self[rw] is used. For the latter, the child's ->qnode_on_parent[rw]. Note that this means that the child which is contributing a bio to its parent should stay pinned until all its bios are dispatched to its grand-parent. This patch moves blkg refcnting from bio add/remove spots to qnode activation/deactivation so that the blkg containing an active qnode is always pinned. As child pins the parent, this is sufficient for keeping the relevant sub-tree pinned while bios are in flight. The starvation issue was spotted by Vivek Goyal. v2: The original patch used the same throtl_grp->qnode_on_self/parent for reads and writes causing RWs to be queued incorrectly if there already are outstanding IOs in the other direction. They should be throtl_grp->qnode_on_self/parent[2] so that READs and WRITEs can use different qnodes. Spotted by Vivek Goyal. Signed-off-by: -
Tejun Heo authored
throtl_pending_timer_fn() currently assumes that the parent_sq is the top level one and the bio's dispatched are ready to be issued; however, this assumption will be wrong with proper hierarchy support. This patch makes the following changes to make throtl_pending_timer_fn() ready for hiearchy. * If the parent_sq isn't the top-level one, update the parent throtl_grp's dispatch time and schedule the next dispatch as necessary. If the parent's dispatch time is now, repeat the function for the parent throtl_grp. * If the parent_sq is the top-level one, kick issue work_item as before. * The debug message printed by throtl_log() now prints out the service_queue's nr_queued[] instead of the total nr_queued as the latter becomes uninteresting and misleading with hierarchical dispatch. Signed-off-by:
-
Tejun Heo authored
tg_dispatch_one_bio() currently assumes that the parent_sq is the top level one and the bio being dispatched is ready to be issued; however, this assumption will be wrong with proper hierarchy support. This patch makes the following changes to make tg_dispatch_on_bio() ready for hiearchy. * throtl_data->nr_queued[] is incremented in blk_throtl_bio() instead of throtl_add_bio_tg() so that throtl_add_bio_tg() can be used to transfer a bio from a child tg to its parent. * tg_dispatch_one_bio() is updated to distinguish whether its parent is another throtl_grp or the throtl_data. If former, the bio is transferred to the parent throtl_grp using throtl_add_bio_tg(). If latter, the bio is ready to be issued and put on the top-level service_queue's bio_lists[] and throtl_data->nr_queued is decremented. As all throtl_grps currently have the top level service_queue as their ->parent_sq, this patch in itself doesn't make any behavior difference. Signed-off-by:
-
Tejun Heo authored
Currently, blk_throtl_bio() issues the passed in bio directly if it's within limits of its associated tg (throtl_grp). This behavior becomes incorrect with hierarchy support as the bio should be accounted to and throttled by the ancestor throtl_grps too. This patch makes the direct issue path of blk_throtl_bio() to loop until it reaches the top-level service_queue or gets throttled. If the former, the bio can be issued directly; otherwise, it gets queued at the first layer it was above limits. As tg->parent_sq is always the top-level service queue currently, this patch in itself doesn't make any behavior differences. Signed-off-by:
-
Tejun Heo authored
The current blk_throtl_drain() assumes that all active throtl_grps are queued on throtl_data->service_queue, which won't be true once hierarchy support is implemented. This patch makes blk_throtl_drain() perform post-order walk of the blkg hierarchy draining each associated throtl_grp, which guarantees that all bios will eventually be pushed to the top-level service_queue in throtl_data. Signed-off-by:
-
Tejun Heo authored
Currently, blk_throtl_dispatch_work_fn() is responsible for both dispatching bio's from throtl_grp's according to their limits and then issuing the dispatched bios. This patch moves the dispatch part to throtl_pending_timer_fn() so that the work item is kicked iff there are bio's to issue. This is to avoid work item execution at each step when hierarchy support is enabled. bio's will be dispatched towards the top-level service_queue from the timers at each layer and the work item will only be used to issue the bio's which reached the top-level service_queue. While fetching bio's to issue from bio_lists[], blk_throtl_dispatch_work_fn() fetches all READs before WRITEs. While the original code also dispatched READs first, if multiple throtl_grps are dispatched on the same run, WRITEs from throtl_grp which is dispatched first would precede READs from throtl_grps which are dispatched later. While this is a behavior change, given that the previous code already prioritized READs and block layer generally prioritizes and segregates READs from WRITEs, this isn't likely to make any noticeable differences. Signed-off-by:
-
Tejun Heo authored
throtl_select_dispatch() only dispatches throtl_quantum bios on each invocation. blk_throtl_dispatch_work_fn() in turn depends on throtl_schedule_next_dispatch() scheduling the next dispatch window immediately so that undue delays aren't incurred. This effectively chains multiple dispatch work item executions back-to-back when there are more than throtl_quantum bios to dispatch on a given tick. There is no reason to finish the current work item just to repeat it immediately. This patch makes throtl_schedule_next_dispatch() return %false without doing anything if the current dispatch window is still open and updates blk_throtl_dispatch_work_fn() repeat dispatching after cpu_relax() on %false return. This change will help implementing hierarchy support as dispatching will be done from pending_timer and immediate reschedule of timer function isn't supported and doesn't make much sense. While this patch changes how dispatch behaves when there are more than throtl_quantum bios to dispatch on a single tick, the behavior change is immaterial. Signed-off-by:
-
Tejun Heo authored
Currently, throtl_data->dispatch_work is a delayed_work item which handles both delayed dispatch and issuing bios. The two tasks will be separated to support proper hierarchy. To prepare for that, this patch separates out the timer into throtl_service_queue->pending_timer from throtl_data->dispatch_work and make the latter a work_struct. * As the timer is now per-service_queue, it's initialized and del_sync'd as its corresponding service_queue is created and destroyed. The timer, when triggered, simply schedules throtl_data->dispathc_work for execution. * throtl_schedule_delayed_work() is renamed to throtl_schedule_pending_timer() and takes @sq and @expires now. * Simiarly, throtl_schedule_next_dispatch() now takes @sq, which should be the parent_sq of the service_queue which just got a new bio or updated. As the parent_sq is always the top-level service_queue now, this doesn't change anything at this point. This patch doesn't introduce any behavior differences. Signed-off-by:
-
Tejun Heo authored
With proper hierarchy support, a bio can be dispatched multiple times until it reaches the top-level service_queue and we don't want to update dispatch stats at each step. They are local stats and will be kept local. If recursive stats are necessary, they should be implemented separately and definitely not by updating counters recursively on each dispatch. This patch moves REQ_THROTTLED setting to throtl_charge_bio() and gate stats update with it so that dispatch stats are updated only on the first time the bio is charged to a throtl_grp, which will always be the throtl_grp the bio was originally queued to. This means that REQ_THROTTLED would be set even for bios which don't get throttled. As we don't want bios to leave blk-throtl with the flag set, move REQ_THROTLLED clearing to the end of blk_throtl_bio() and clear if the bio is being issued directly. Signed-off-by:
-
Tejun Heo authored
Now that both throtl_data and throtl_grp embed throtl_service_queue, we can unify throtl_log() and throtl_log_tg(). * sq_to_tg() is added. This returns the throtl_grp a service_queue is embedded in. If the service_queue is the top-level one embedded in throtl_data, NULL is returned. * sq_to_td() is added. A service_queue is always associated with a throtl_data. This function finds the associated td and returns it. * throtl_log() is updated to take throtl_service_queue instead of throtl_data. If the service_queue is one embedded in throtl_grp, it prints the same header as throtl_log_tg() did. If it's one embedded in throtl_data, it behaves the same as before. This renders throtl_log_tg() unnecessary. Removed. This change is necessary for hierarchy support as we're gonna be using the same code paths to dispatch bios to intermediate service_queues embedded in throtl_grps and the top-level service_queue embedded in throtl_data. This patch doesn't make any behavior changes. v2: throtl_log() didn't print a space after blkg path. Updated so that it prints a space after throtl_grp path. Spotted by Vivek. Signed-off-by: -
Tejun Heo authored
To prepare for hierarchy support, this patch adds throtl_service_queue->service_sq which points to the arent service_queue. Currently, for all service_queues embedded in throtl_grps, it points to throtl_data->service_queue. As throtl_data->service_queue doesn't have a parent its parent_sq is set to NULL. There are a number of functions which take both throtl_grp *tg and throtl_service_queue *parent_sq. With this patch, the parent service_queue can be determined from @tg and the @parent_sq arguments are removed. This patch doesn't make any behavior differences. Signed-off-by:
-
Tejun Heo authored
When blk_throtl_bio() wants to queue a bio to a tg (throtl_grp), it avoids invoking tg_update_disptime() and throtl_schedule_next_dispatch() if the tg already has bios queued in that direction. As a new bio is appeneded after the existing ones, it can't change the tg's next dispatch time or the parent's dispatch schedule. This optimization is currently open coded in blk_throtl_bio(). Whether the target biolist was occupied was recorded in a local variable and later used to skip disptime update. This patch moves generalizes it so that throtl_add_bio_tg() sets a new flag THROTL_TG_WAS_EMPTY if the biolist was empty before the new bio was added. tg_update_disptime() clears the flag automatically. blk_throtl_bio() is updated to simply test the flag before updating disptime. This patch doesn't make any functional differences now but will enable using the same optimization for recursive dispatch. Signed-off-by:
-
