We don't bother aligining them on a cacheline boundary, since
that is totally excessive in some configurations (especially
P4's with 128-byte cachelines).

Instead, we make the minimum inline string size a bit longer,
and re-order a few fields that allow for better packing on
64-bit architectures, for better memory utilization.

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into ppc970.osdl.org:/home/torvalds/v2.6/linux

I moved this a little too late - we need to run populate_rootfs() before
running initcalls because some driver initcalls need to open files for
firmware.

The populate_rootfs() call is still coming after init_idle(), so it won't
knock the scheduler over.

This is a version of Binary Increase Control (BIC) TCP
developed by NCSU.   It is yet another TCP congestion control
algorithm for handling big fat pipes. For normal size congestion
windows it behaves the same as existing TCP Reno, but when window
is large it uses additive increase to ensure fairness and when
window is small it uses binary search increase.

For more details see the BIC TCP web page
 http://www.csc.ncsu.edu/faculty/rhee/export/bitcp/

The original code was for web100 (2.4); this version is pretty
much the same but targeted for 2.6 with less sysctl parameters 
and more constants.

I don't have a real high speed long haul network to test, but
when running over 1G links with delays, the performance is more stable
(ie tests are repeatable) and as fast as existing Reno.

Avoid the use of sizeof() and pointer arithmetic to get to the end
of sctp_cookie structure. Instead use the last element peer_init which
is a zero-sized array as the offset.

The purpose of this is to allow sockets created by the kernel in this way
to be passed through the LSM socket creation hooks and be labeled and
mediated in the same manner as other sockets.

This patches addresses a class of potential issues with LSMs, where such
sockets will not be labeled correctly (if at all), or mediated during
creation.  Under SELinux, it fixes a specific bug where RPC sockets
created by the kernel during TCP NFS serving are unlabeled.

Under SELinux, and potentially other LSMs, we need to be able to
distinguish between user sockets and kernel sockets.  For SELinux
specifically, kernel sockets need to be specially labeled during creation,
then bypass access control checks (they are controlled by the kernel
itself and not subject to SELinux mediation).

This addresses a class of potential issues in SELinux where, for example, 
a TCP NFS session times out, then the kernel re-establishes an RPC 
connection upon further user activity.  We do not want such kernel 
created sockets to be labeled with user security contexts.

sock_create() and sock_create_kern() are wrapper functions, which seems 
semantically clearer to me than e.g. adding a flag to sock_create().  If 
you prefer the latter, then let me know.

The patch also adds an argument to the LSM socket creation functions
indicating whether the socket being created is a kernel socket or not.

into nuts.davemloft.net:/disk1/BK/net-2.6

From: Christoph Hellwig <hch@lst.de>

This one is a little funny.  The SGI trees don't show this issue because dmapi
and quota are separate modules so they must be unloaded before xfs_fs_exit can
be called at all.

So let's move the exitcalls for them in mainline first to simulate that
behaviour.

From: Paul Mackerras <paulus@samba.org>

This patch fixes a bug in the pmac-zilog driver where if you enable
CRTSCTS mode, it won't output data when CTS is asserted.  On
powermacs, the CTS input is inverted.  It also fixes a logic bug in
testing for CTS and DCD changes.

   Check for last adapter link is done by next member,
   because entries are not removed yet.

They all have 128 bytes of ACPI/TCO IO space pointed to
by config space register 0x40, and 64 bytes of GPIO space
pointed to by 0x58.

Thanks to Jun Nakajima for the full list.

into ppc970.osdl.org:/home/torvalds/v2.6/linux

We don't have DMA support for AMBA devices yet.

into ppc970.osdl.org:/home/torvalds/v2.6/linux

      read-write (re)mount is requested, empty $LogFile by overwriting it
      with 0xff bytes to ensure that Windows cannot cause data corruption
      by replaying a stale journal after Linux has written to the volume.

into cantab.net:/home/src/ntfs-2.6

      and force a read-only mount if not (fs/ntfs/super.c and fs/ntfs/logfile.c).  This
      is a little bit of a crude check in that we only look at the restart areas and
      not at the actual log records so that there will be a very small number of cases
      where we think that a volume is dirty when in fact it is clean.  This should only
      affect volumes that have not been shutdown cleanly and did not have any pending,
      non-check-pointed i/o.

This fixes a (very very small) preempt race window when we
invalidate the IO permission bitmap on process exit.

There is a bug where if any process that obtained an IO access
permissions via ioperm() does not explicitly "drop" that permissions,
the IO permissions don't get properly invalidated on process exit.

The cause is that exit_thread() only invalidates the per-thread
io_bitmap pointer, but doesn't invalidate the per-TSS io_bitmap pointer
as well. 

As the per-thread pointer is invalidated, __switch_to() doesn't take
care of that one either, so the per-TSS pointer stays valid as long as
some other process does ioperm().

This fixes the problem - it invalidates the per-TSS io_bitmap pointer
and the problem goes away. 

When Patrick removed ide_notify_reboot() in 2.5.42, he didn't notice
that it meant that IDE no longer had any shutdown() functionality.

So we did the right thing on suspend, but not on shutdown.

ide_notify_reboot() was only doing STANDBY on shutdown (because FLUSH
'doesn't work' in 2.4 too) but it worked okay and we still should do STANDBY
on shutdown because some broken disks flush their caches.

Thus just calls bus->suspend() (FLUSH+STANDBY) at shutdown time.  We can
add some safety delay later - 2.4 doesn't have any.

There is a typo in the PTE freeing code causing us to possibly
overflow the batch structure.

Obvious fix (look at the closing parentheses).

into cantab.net:/home/src/ntfs-2.6

I've updated the logips2pp driver to detect the MX310 and MX510 mice
and also made it more maintainable by putting everything into one
table instead of having 4 arrays for them (the MX700 support wasn't
added correctly in the last revision).

This makes the idedisk_release function only flush the cache on final
release; with the recent 2.6 blocklayer updates release gets called
somewhat frequently, and at times where IO is outstanding to the disk.

This bug didn't trigger before simply because ide_cacheflush_p() always
was a nop.

gconf doesn't correctly toggle through the values of a symbol, so use
sym_toggle_tristate_value() instead.

Problem reported by Martin Persenius <martin@persenius.net>

This enables proper mxcsr register masking: the magic mask "0xffbf"
is not necessarily correct for all CPU's, and there is an architected
way to discover the proper MXCSR feature bits by examining the fxsave
results.

Please refer to IA32 Software Developer's Manual, Volume 1, Section
11.6.6 for more details.

ncpfs was forgetting to update iovec's iov_base field whenever partial
transmission occured. This was causing data corruption during large
(60kB) writes.

The code now also passes copy of iovec to the sock_sendmsg, so it does
not rely on network stack updating (or not updating) passed iovec in
case of success (or failure).