resolve_btfids doesn't like empty set. Add unused ID when BPF_LSM is off.

Fixes: 1e6c62a8 ("bpf: Introduce sleepable BPF programs")
Reported-by: Björn Töpel <bjorn.topel@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Song Liu <songliubraving@fb.com>
Acked-by: KP Singh <kpsingh@google.com>
Link: https://lore.kernel.org/bpf/20200831163132.66521-1-alexei.starovoitov@gmail.com

When CONFIG_BPF_SYSCALL is not set, but CONFIG_BPF_JIT=y
the kernel build fails:
In file included from ../kernel/bpf/trampoline.c:11:
../kernel/bpf/trampoline.c: In function ‘bpf_trampoline_update’:
../kernel/bpf/trampoline.c:220:39: error: ‘call_rcu_tasks_trace’ undeclared
../kernel/bpf/trampoline.c: In function ‘__bpf_prog_enter_sleepable’:
../kernel/bpf/trampoline.c:411:2: error: implicit declaration of function ‘rcu_read_lock_trace’
../kernel/bpf/trampoline.c: In function ‘__bpf_prog_exit_sleepable’:
../kernel/bpf/trampoline.c:416:2: error: implicit declaration of function ‘rcu_read_unlock_trace’

This is due to:
obj-$(CONFIG_BPF_JIT) += trampoline.o
obj-$(CONFIG_BPF_JIT) += dispatcher.o
There is a number of functions that arch/x86/net/bpf_jit_comp.c is
using from these two files, but none of them will be used when
only cBPF is on (which is the case for BPF_SYSCALL=n BPF_JIT=y).

Add rcu_trace functions to rcupdate_trace.h. The JITed code won't execute them
and BPF trampoline logic won't be used without BPF_SYSCALL.

Fixes: 1e6c62a8 ("bpf: Introduce sleepable BPF programs")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/bpf/20200831155155.62754-1-alexei.starovoitov@gmail.com

Alexei Starovoitov says:

====================
v2->v3:
- switched to minimal allowlist approach. Essentially that means that syscall
  entry, few btrfs allow_error_inject functions, should_fail_bio(), and two LSM
  hooks: file_mprotect and bprm_committed_creds are the only hooks that allow
  attaching of sleepable BPF programs. When comprehensive analysis of LSM hooks
  will be done this allowlist will be extended.
- added patch 1 that fixes prototypes of two mm functions to reliably work with
  error injection. It's also necessary for resolve_btfids tool to recognize
  these two funcs, but that's secondary.

v1->v2:
- split fmod_ret fix into separate patch
- added denylist

v1:
This patch set introduces the minimal viable support for sleepable bpf programs.
In this patch only fentry/fexit/fmod_ret and lsm progs can be sleepable.
Only array and pre-allocated hash and lru maps allowed.

Here is 'perf report' difference of sleepable vs non-sleepable:
   3.86%  bench     [k] __srcu_read_unlock
   3.22%  bench     [k] __srcu_read_lock
   0.92%  bench     [k] bpf_prog_740d4210cdcd99a3_bench_trigger_fentry_sleep
   0.50%  bench     [k] bpf_trampoline_10297
   0.26%  bench     [k] __bpf_prog_exit_sleepable
   0.21%  bench     [k] __bpf_prog_enter_sleepable
vs
   0.88%  bench     [k] bpf_prog_740d4210cdcd99a3_bench_trigger_fentry
   0.84%  bench     [k] bpf_trampoline_10297
   0.13%  bench     [k] __bpf_prog_enter
   0.12%  bench     [k] __bpf_prog_exit
vs
   0.79%  bench     [k] bpf_prog_740d4210cdcd99a3_bench_trigger_fentry_sleep
   0.72%  bench     [k] bpf_trampoline_10381
   0.31%  bench     [k] __bpf_prog_exit_sleepable
   0.29%  bench     [k] __bpf_prog_enter_sleepable

Sleepable vs non-sleepable program invocation overhead is only marginally higher
due to rcu_trace. srcu approach is much slower.
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Modify few tests to sanity test sleepable bpf functionality.

Running 'bench trig-fentry-sleep' vs 'bench trig-fentry' and 'perf report':
sleepable with SRCU:
   3.86%  bench     [k] __srcu_read_unlock
   3.22%  bench     [k] __srcu_read_lock
   0.92%  bench     [k] bpf_prog_740d4210cdcd99a3_bench_trigger_fentry_sleep
   0.50%  bench     [k] bpf_trampoline_10297
   0.26%  bench     [k] __bpf_prog_exit_sleepable
   0.21%  bench     [k] __bpf_prog_enter_sleepable

sleepable with RCU_TRACE:
   0.79%  bench     [k] bpf_prog_740d4210cdcd99a3_bench_trigger_fentry_sleep
   0.72%  bench     [k] bpf_trampoline_10381
   0.31%  bench     [k] __bpf_prog_exit_sleepable
   0.29%  bench     [k] __bpf_prog_enter_sleepable

non-sleepable with RCU:
   0.88%  bench     [k] bpf_prog_740d4210cdcd99a3_bench_trigger_fentry
   0.84%  bench     [k] bpf_trampoline_10297
   0.13%  bench     [k] __bpf_prog_enter
   0.12%  bench     [k] __bpf_prog_exit
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: KP Singh <kpsingh@google.com>
Link: https://lore.kernel.org/bpf/20200827220114.69225-6-alexei.starovoitov@gmail.com

Pass request to load program as sleepable via ".s" suffix in the section name.
If it happens in the future that all map types and helpers are allowed with
BPF_F_SLEEPABLE flag "fmod_ret/" and "lsm/" can be aliased to "fmod_ret.s/" and
"lsm.s/" to make all lsm and fmod_ret programs sleepable by default. The fentry
and fexit programs would always need to have sleepable vs non-sleepable
distinction, since not all fentry/fexit progs will be attached to sleepable
kernel functions.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: KP Singh <kpsingh@google.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200827220114.69225-5-alexei.starovoitov@gmail.com

Sleepable BPF programs can now use copy_from_user() to access user memory.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: KP Singh <kpsingh@google.com>
Link: https://lore.kernel.org/bpf/20200827220114.69225-4-alexei.starovoitov@gmail.com

Introduce sleepable BPF programs that can request such property for themselves
via BPF_F_SLEEPABLE flag at program load time. In such case they will be able
to use helpers like bpf_copy_from_user() that might sleep. At present only
fentry/fexit/fmod_ret and lsm programs can request to be sleepable and only
when they are attached to kernel functions that are known to allow sleeping.

The non-sleepable programs are relying on implicit rcu_read_lock() and
migrate_disable() to protect life time of programs, maps that they use and
per-cpu kernel structures used to pass info between bpf programs and the
kernel. The sleepable programs cannot be enclosed into rcu_read_lock().
migrate_disable() maps to preempt_disable() in non-RT kernels, so the progs
should not be enclosed in migrate_disable() as well. Therefore
rcu_read_lock_trace is used to protect the life time of sleepable progs.

There are many networking and tracing program types. In many cases the
'struct bpf_prog *' pointer itself is rcu protected within some other kernel
data structure and the kernel code is using rcu_dereference() to load that
program pointer and call BPF_PROG_RUN() on it. All these cases are not touched.
Instead sleepable bpf programs are allowed with bpf trampoline only. The
program pointers are hard-coded into generated assembly of bpf trampoline and
synchronize_rcu_tasks_trace() is used to protect the life time of the program.
The same trampoline can hold both sleepable and non-sleepable progs.

When rcu_read_lock_trace is held it means that some sleepable bpf program is
running from bpf trampoline. Those programs can use bpf arrays and preallocated
hash/lru maps. These map types are waiting on programs to complete via
synchronize_rcu_tasks_trace();

Updates to trampoline now has to do synchronize_rcu_tasks_trace() and
synchronize_rcu_tasks() to wait for sleepable progs to finish and for
trampoline assembly to finish.

This is the first step of introducing sleepable progs. Eventually dynamically
allocated hash maps can be allowed and networking program types can become
sleepable too.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: KP Singh <kpsingh@google.com>
Link: https://lore.kernel.org/bpf/20200827220114.69225-3-alexei.starovoitov@gmail.com

'static' and 'static noinline' function attributes make no guarantees that
gcc/clang won't optimize them. The compiler may decide to inline 'static'
function and in such case ALLOW_ERROR_INJECT becomes meaningless. The compiler
could have inlined __add_to_page_cache_locked() in one callsite and didn't
inline in another. In such case injecting errors into it would cause
unpredictable behavior. It's worse with 'static noinline' which won't be
inlined, but it still can be optimized. Like the compiler may decide to remove
one argument or constant propagate the value depending on the callsite.

To avoid such issues make sure that these functions are global noinline.

Fixes: af3b8544 ("mm/page_alloc.c: allow error injection")
Fixes: cfcbfb13 ("mm/filemap.c: enable error injection at add_to_page_cache()")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/bpf/20200827220114.69225-2-alexei.starovoitov@gmail.com

This patch tests the inner map size can be different
for reuseport_sockarray but has to be the same for
arraymap.  A new subtest "diff_size" is added for this.

The existing test is moved to a subtest "lookup_update".
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200828011819.1970825-1-kafai@fb.com

Most of the maps do not use max_entries during verification time.
Thus, those map_meta_equal() do not need to enforce max_entries
when it is inserted as an inner map during runtime.  The max_entries
check is removed from the default implementation bpf_map_meta_equal().

The prog_array_map and xsk_map are exception.  Its map_gen_lookup
uses max_entries to generate inline lookup code.  Thus, they will
implement its own map_meta_equal() to enforce max_entries.
Since there are only two cases now, the max_entries check
is not refactored and stays in its own .c file.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200828011813.1970516-1-kafai@fb.com

Some properties of the inner map is used in the verification time.
When an inner map is inserted to an outer map at runtime,
bpf_map_meta_equal() is currently used to ensure those properties
of the inserting inner map stays the same as the verification
time.

In particular, the current bpf_map_meta_equal() checks max_entries which
turns out to be too restrictive for most of the maps which do not use
max_entries during the verification time.  It limits the use case that
wants to replace a smaller inner map with a larger inner map.  There are
some maps do use max_entries during verification though.  For example,
the map_gen_lookup in array_map_ops uses the max_entries to generate
the inline lookup code.

To accommodate differences between maps, the map_meta_equal is added
to bpf_map_ops.  Each map-type can decide what to check when its
map is used as an inner map during runtime.

Also, some map types cannot be used as an inner map and they are
currently black listed in bpf_map_meta_alloc() in map_in_map.c.
It is not unusual that the new map types may not aware that such
blacklist exists.  This patch enforces an explicit opt-in
and only allows a map to be used as an inner map if it has
implemented the map_meta_equal ops.  It is based on the
discussion in [1].

All maps that support inner map has its map_meta_equal points
to bpf_map_meta_equal in this patch.  A later patch will
relax the max_entries check for most maps.  bpf_types.h
counts 28 map types.  This patch adds 23 ".map_meta_equal"
by using coccinelle.  -5 for
	BPF_MAP_TYPE_PROG_ARRAY
	BPF_MAP_TYPE_(PERCPU)_CGROUP_STORAGE
	BPF_MAP_TYPE_STRUCT_OPS
	BPF_MAP_TYPE_ARRAY_OF_MAPS
	BPF_MAP_TYPE_HASH_OF_MAPS

The "if (inner_map->inner_map_meta)" check in bpf_map_meta_alloc()
is moved such that the same error is returned.

[1]: https://lore.kernel.org/bpf/20200522022342.899756-1-kafai@fb.com/Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200828011806.1970400-1-kafai@fb.com

bpf_link_info.iter is used by link_query to return bpf_iter_link_info
to user space. Fields may be different, e.g., map_fd vs. map_id, so
we cannot reuse the exact structure. But make them similar, e.g.,

  struct bpf_link_info {
     /* common fields */
     union {
	struct { ... } raw_tracepoint;
	struct { ... } tracing;
	...
	struct {
	    /* common fields for iter */
	    union {
		struct {
		    __u32 map_id;
		} map;
		/* other structs for other targets */
	    };
	};
    };
 };

so the structure is extensible the same way as bpf_iter_link_info.

Fixes: 6b0a249a ("bpf: Implement link_query for bpf iterators")
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200828051922.758950-1-yhs@fb.com

The system for "Auto-detecting system features" located under
tools/build/ are (currently) used by perf, libbpf and bpftool. It can
contain stalled feature detection files, which are not cleaned up by
libbpf and bpftool on make clean (side-note: perf tool is correct).

Fix this by making the users invoke the make clean target.

Some details about the changes. The libbpf Makefile already had a
clean-config target (which seems to be copy-pasted from perf), but this
target was not "connected" (a make dependency) to clean target. Choose
not to rename target as someone might be using it. Did change the output
from "CLEAN config" to "CLEAN feature-detect", to make it more clear
what happens.

This is related to the complaint and troubleshooting in the following
link: https://lore.kernel.org/lkml/20200818122007.2d1cfe2d@carbon/Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/lkml/20200818122007.2d1cfe2d@carbon/
Link: https://lore.kernel.org/bpf/159851841661.1072907.13770213104521805592.stgit@firesoul

Fix compilation warnings due to __u64 defined differently as `unsigned long`
or `unsigned long long` on different architectures (e.g., ppc64le differs from
x86-64). Also cast one argument to size_t to fix printf warning of similar
nature.

Fixes: eacaaed7 ("libbpf: Implement enum value-based CO-RE relocations")
Fixes: 50e09460 ("libbpf: Skip well-known ELF sections when iterating ELF")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200827041109.3613090-1-andriin@fb.com

Added some test_verifier bounds check test cases for
xor operations.
  $ ./test_verifier
  ...
  #78/u bounds check for reg = 0, reg xor 1 OK
  #78/p bounds check for reg = 0, reg xor 1 OK
  #79/u bounds check for reg32 = 0, reg32 xor 1 OK
  #79/p bounds check for reg32 = 0, reg32 xor 1 OK
  #80/u bounds check for reg = 2, reg xor 3 OK
  #80/p bounds check for reg = 2, reg xor 3 OK
  #81/u bounds check for reg = any, reg xor 3 OK
  #81/p bounds check for reg = any, reg xor 3 OK
  #82/u bounds check for reg32 = any, reg32 xor 3 OK
  #82/p bounds check for reg32 = any, reg32 xor 3 OK
  #83/u bounds check for reg > 0, reg xor 3 OK
  #83/p bounds check for reg > 0, reg xor 3 OK
  #84/u bounds check for reg32 > 0, reg32 xor 3 OK
  #84/p bounds check for reg32 > 0, reg32 xor 3 OK
  ...
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200825064609.2018077-1-yhs@fb.com

bpf selftest test_progs/test_sk_assign failed with llvm 11 and llvm 12.
Compared to llvm 10, llvm 11 and 12 generates xor instruction which
is not handled properly in verifier. The following illustrates the
problem:

  16: (b4) w5 = 0
  17: ... R5_w=inv0 ...
  ...
  132: (a4) w5 ^= 1
  133: ... R5_w=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) ...
  ...
  37: (bc) w8 = w5
  38: ... R5=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff))
          R8_w=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) ...
  ...
  41: (bc) w3 = w8
  42: ... R3_w=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) ...
  45: (56) if w3 != 0x0 goto pc+1
   ... R3_w=inv0 ...
  46: (b7) r1 = 34
  47: R1_w=inv34 R7=pkt(id=0,off=26,r=38,imm=0)
  47: (0f) r7 += r1
  48: R1_w=invP34 R3_w=inv0 R7_w=pkt(id=0,off=60,r=38,imm=0)
  48: (b4) w9 = 0
  49: R1_w=invP34 R3_w=inv0 R7_w=pkt(id=0,off=60,r=38,imm=0)
  49: (69) r1 = *(u16 *)(r7 +0)
  invalid access to packet, off=60 size=2, R7(id=0,off=60,r=38)
  R7 offset is outside of the packet

At above insn 132, w5 = 0, but after w5 ^= 1, we give a really conservative
value of w5. At insn 45, in reality the condition should be always false.
But due to conservative value for w3, the verifier evaluates it could be
true and this later leads to verifier failure complaining potential
packet out-of-bound access.

This patch implemented proper XOR support in verifier.
In the above example, we have:
  132: R5=invP0
  132: (a4) w5 ^= 1
  133: R5_w=invP1
  ...
  37: (bc) w8 = w5
  ...
  41: (bc) w3 = w8
  42: R3_w=invP1
  ...
  45: (56) if w3 != 0x0 goto pc+1
  47: R3_w=invP1
  ...
  processed 353 insns ...
and the verifier can verify the program successfully.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200825064608.2017937-1-yhs@fb.com

There are code paths where EINVAL is returned directly without setting
errno. In that case, errno could be 0, which would mask the
failure. For example, if a careless programmer set log_level to 10000
out of laziness, they would have to spend a long time trying to figure
out why.

Fixes: 4f33ddb4 ("libbpf: Propagate EPERM to caller on program load")
Signed-off-by: Alex Gartrell <alexgartrell@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200826075549.1858580-1-alexgartrell@gmail.com

Udip Pant says:

====================
This patch series adds changes in verifier to make decisions such as granting
of read / write access or enforcement of return code status based on
the program type of the target program while using dynamic program
extension (of type BPF_PROG_TYPE_EXT).

The BPF_PROG_TYPE_EXT type can be used to extend types such as XDP, SKB
and others. Since the BPF_PROG_TYPE_EXT program type on itself is just a
placeholder for those, we need this extended check for those extended
programs to actually work with proper access, while using this option.

Patch #1 includes changes in the verifier.
Patch #2 adds selftests to verify write access on a packet for a valid
extension program type
Patch #3 adds selftests to verify proper check for the return code
Patch #4 adds selftests to ensure access permissions and restrictions
for some map types such sockmap.

Changelogs:
  v2 -> v3:
    * more comprehensive resolution of the program type in the verifier
      based on the target program (and not just for the packet access)
    * selftests for checking return code and map access
    * Also moved this patch to 'bpf-next' from 'bpf' tree
  v1 -> v2:
    * extraction of the logic to resolve prog type into a separate method
    * selftests to check for packet access for a valid freplace prog
====================
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

This adds further tests to ensure access permissions and restrictions
are applied properly for some map types such as sock-map.
It also adds another negative tests to assert static functions cannot be
replaced. In the 'unreliable' mode it still fails with error 'tracing progs
cannot use bpf_spin_lock yet' with the change in the verifier
Signed-off-by: Udip Pant <udippant@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200825232003.2877030-5-udippant@fb.com

This adds test to enforce same check for the return code for the extended prog
as it is enforced for the target program. It asserts failure for a
return code, which is permitted without the patch in this series, while
it is restricted after the application of this patch.
Signed-off-by: Udip Pant <udippant@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200825232003.2877030-4-udippant@fb.com

This adds a selftest that tests the behavior when a freplace target program
attempts to make a write access on a packet. The expectation is that the read or write
access is granted based on the program type of the linked program and
not itself (which is of type, for e.g., BPF_PROG_TYPE_EXT).

This test fails without the associated patch on the verifier.
Signed-off-by: Udip Pant <udippant@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200825232003.2877030-3-udippant@fb.com

This patch adds changes in verifier to make decisions such as granting
of read / write access or enforcement of return code status based on
the program type of the target program while using dynamic program
extension (of type BPF_PROG_TYPE_EXT).

The BPF_PROG_TYPE_EXT type can be used to extend types such as XDP, SKB
and others. Since the BPF_PROG_TYPE_EXT program type on itself is just a
placeholder for those, we need this extended check for those extended
programs to actually work with proper access, while using this option.

Specifically, it introduces following changes:
- may_access_direct_pkt_data:
    allow access to packet data based on the target prog
- check_return_code:
    enforce return code based on the target prog
    (currently, this check is skipped for EXT program)
- check_ld_abs:
    check for 'may_access_skb' based on the target prog
- check_map_prog_compatibility:
    enforce the map compatibility check based on the target prog
- may_update_sockmap:
    allow sockmap update based on the target prog

Some other occurrences of prog->type is left as it without replacing
with the 'resolved' type:
- do_check_common() and check_attach_btf_id():
    already have specific logic to handle the EXT prog type
- jit_subprogs() and bpf_check():
    Not changed for jit compilation or while inferring env->ops

Next few patches in this series include selftests for some of these cases.
Signed-off-by: Udip Pant <udippant@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200825232003.2877030-2-udippant@fb.com

There is a spelling mistake in a check error message. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200826085907.43095-1-colin.king@canonical.com

Alexei reported compile breakage on newer systems with
following error:

  In file included from /usr/include/fcntl.h:290:0,
  4814                 from ./test_progs.h:29,
  4815                 from
  .../bpf-next/tools/testing/selftests/bpf/prog_tests/d_path.c:3:
  4816In function ‘open’,
  4817    inlined from ‘trigger_fstat_events’ at
  .../bpf-next/tools/testing/selftests/bpf/prog_tests/d_path.c:50:10,
  4818    inlined from ‘test_d_path’ at
  .../bpf-next/tools/testing/selftests/bpf/prog_tests/d_path.c:119:6:
  4819/usr/include/x86_64-linux-gnu/bits/fcntl2.h:50:4: error: call to
  ‘__open_missing_mode’ declared with attribute error: open with O_CREAT
  or O_TMPFILE in second argument needs 3 arguments
  4820    __open_missing_mode ();
  4821    ^~~~~~~~~~~~~~~~~~~~~~

We're missing permission bits as 3rd argument
for open call with O_CREAT flag specified.

Fixes: e4d1af4b ("selftests/bpf: Add test for d_path helper")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200826101845.747617-1-jolsa@kernel.org

Adding test to for sets resolve_btfids. We're checking that
testing set gets properly resolved and sorted.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200825192124.710397-15-jolsa@kernel.org

Adding test for d_path helper which is pretty much
copied from Wenbo Zhang's test for bpf_get_fd_path,
which never made it in.

The test is doing fstat/close on several fd types,
and verifies we got the d_path helper working on
kernel probes for vfs_getattr/filp_close functions.
Original-patch-by: Wenbo Zhang <ethercflow@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200825192124.710397-14-jolsa@kernel.org

Adding verifier test for attaching tracing program and
calling d_path helper from within and testing that it's
allowed for dentry_open function and denied for 'd_path'
function with appropriate error.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200825192124.710397-13-jolsa@kernel.org

Updating btf.rst doc with info about BTF_SET_START/END macros.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200825192124.710397-12-jolsa@kernel.org

Adding d_path helper function that returns full path for
given 'struct path' object, which needs to be the kernel
BTF 'path' object. The path is returned in buffer provided
'buf' of size 'sz' and is zero terminated.

  bpf_d_path(&file->f_path, buf, size);

The helper calls directly d_path function, so there's only
limited set of function it can be called from. Adding just
very modest set for the start.

Updating also bpf.h tools uapi header and adding 'path' to
bpf_helpers_doc.py script.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: KP Singh <kpsingh@google.com>
Link: https://lore.kernel.org/bpf/20200825192124.710397-11-jolsa@kernel.org

Adding support to define sorted set of BTF ID values.

Following defines sorted set of BTF ID values:

  BTF_SET_START(btf_allowlist_d_path)
  BTF_ID(func, vfs_truncate)
  BTF_ID(func, vfs_fallocate)
  BTF_ID(func, dentry_open)
  BTF_ID(func, vfs_getattr)
  BTF_ID(func, filp_close)
  BTF_SET_END(btf_allowlist_d_path)

It defines following 'struct btf_id_set' variable to access
values and count:

  struct btf_id_set btf_allowlist_d_path;

Adding 'allowed' callback to struct bpf_func_proto, to allow
verifier the check on allowed callers.

Adding btf_id_set_contains function, which will be used by
allowed callbacks to verify the caller's BTF ID value is
within allowed set.

Also removing extra '\' in __BTF_ID_LIST macro.

Added BTF_SET_START_GLOBAL macro for global sets.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200825192124.710397-10-jolsa@kernel.org

Adding btf_struct_ids_match function to check if given address provided
by BTF object + offset is also address of another nested BTF object.

This allows to pass an argument to helper, which is defined via parent
BTF object + offset, like for bpf_d_path (added in following changes):

  SEC("fentry/filp_close")
  int BPF_PROG(prog_close, struct file *file, void *id)
  {
    ...
    ret = bpf_d_path(&file->f_path, ...

The first bpf_d_path argument is hold by verifier as BTF file object
plus offset of f_path member.

The btf_struct_ids_match function will walk the struct file object and
check if there's nested struct path object on the given offset.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200825192124.710397-9-jolsa@kernel.org

Adding btf_struct_walk function that walks through the
struct type + given offset and returns following values:

  enum bpf_struct_walk_result {
       /* < 0 error */
       WALK_SCALAR = 0,
       WALK_PTR,
       WALK_STRUCT,
  };

WALK_SCALAR - when SCALAR_VALUE is found
WALK_PTR    - when pointer value is found, its ID is stored
              in 'next_btf_id' output param
WALK_STRUCT - when nested struct object is found, its ID is stored
              in 'next_btf_id' output param

It will be used in following patches to get all nested
struct objects for given type and offset.

The btf_struct_access now calls btf_struct_walk function,
as long as it gets nested structs as return value.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200825192124.710397-8-jolsa@kernel.org

Andrii suggested we can simply jump to again label
instead of making recursion call.
Suggested-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200825192124.710397-7-jolsa@kernel.org

Adding type_id pointer as argument to __btf_resolve_size
to return also BTF ID of the resolved type. It will be
used in following changes.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200825192124.710397-6-jolsa@kernel.org

If the resolved type is array, make btf_resolve_size return also
ID of the elem type. It will be needed in following changes.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200825192124.710397-5-jolsa@kernel.org

Moving btf_resolve_size into __btf_resolve_size and
keeping btf_resolve_size public with just first 3
arguments, because the rest of the arguments are not
used by outside callers.

Following changes are adding more arguments, which
are not useful to outside callers. They will be added
to the __btf_resolve_size function.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200825192124.710397-4-jolsa@kernel.org

The set symbol does not have the unique number suffix,
so we need to give it a special parsing function.

This was omitted in the first batch, because there was
no set support yet, so it slipped in the testing.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200825192124.710397-3-jolsa@kernel.org

To make sure we don't crash on malformed symbols.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200825192124.710397-2-jolsa@kernel.org

The CC_CAN_LINK checks that the host compiler can link, but bpf_preload
relies on libbpf which in turn needs libelf to be present during linking.
allmodconfig runs in odd setups with cross compilers and missing host
libraries like libelf. Instead of extending kconfig with every possible
library that bpf_preload might need disallow building BPF_PRELOAD in
such build-only configurations.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

inode_local_storage:

* Hook to the file_open and inode_unlink LSM hooks.
* Create and unlink a temporary file.
* Store some information in the inode's bpf_local_storage during
  file_open.
* Verify that this information exists when the file is unlinked.

sk_local_storage:

* Hook to the socket_post_create and socket_bind LSM hooks.
* Open and bind a socket and set the sk_storage in the
  socket_post_create hook using the start_server helper.
* Verify if the information is set in the socket_bind hook.
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200825182919.1118197-8-kpsingh@chromium.org