- 18 Jul, 2019 7 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "A collection of small fixes. - The optimization of PM resume with HD-audio HDMI codecs, which eventually work around weird issues - A correction of Intel Icelake HDMI audio code - Quirks for Dell machines with Realtek HD-audio codecs - The fix for too long sequencer write stall that was spotted by syzkaller - A few trivial cleanups reported by coccinelle" * tag 'sound-fix-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Don't resume forcibly i915 HDMI/DP codec ALSA: hda/hdmi - Fix i915 reverse port/pin mapping ALSA: hda/hdmi - Remove duplicated define ALSA: seq: Break too long mutex context in the write loop ALSA: hda/realtek: apply ALC891 headset fixup to one Dell machine ALSA: rme9652: Unneeded variable: "result". ALSA: emu10k1: Remove unneeded variable "change" ALSA: au88x0: Remove unneeded variable: "changed" ALSA: hda/realtek - Fixed Headphone Mic can't record on Dell platform ALSA: ps3: Remove Unneeded variable: "ret" ALSA: lx6464es: Remove unneeded variable err -
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull more power management updates from Rafael Wysocki: "These modify the Intel RAPL driver to allow it to use an MMIO interface to the hardware, make the int340X thermal driver provide such an interface for it, add Intel Ice Lake CPU IDs to the RAPL driver (these changes depend on the previously merged x86 arch changes), update cpufreq to use the PM QoS framework for managing the min and max frequency limits, and add update the imx-cpufreq-dt cpufreq driver to support i.MX8MN. Specifics: - Add MMIO interface support to the Intel RAPL power capping driver and update the int340X thermal driver to provide a RAPL MMIO interface (Zhang Rui, Stephen Rothwell). - Add Intel Ice Lake CPU IDs to the RAPL driver (Zhang Rui, Rajneesh Bhardwaj). - Make cpufreq use the PM QoS framework (instead of notifiers) for managing the min and max frequency constraints (Viresh Kumar). - Add i.MX8MN support to the imx-cpufreq-dt cpufreq driver (Anson Huang)" * tag 'pm-5.3-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (27 commits) cpufreq: Make cpufreq_generic_init() return void intel_rapl: need linux/cpuhotplug.h for enum cpuhp_state powercap/rapl: Add Ice Lake NNPI support to RAPL driver powercap/intel_rapl: add support for ICX-D powercap/intel_rapl: add support for ICX powercap/intel_rapl: add support for IceLake desktop intel_rapl: Fix module autoloading issue int340X/processor_thermal_device: add support for MMIO RAPL intel_rapl: support two power limits for every RAPL domain intel_rapl: support 64 bit register intel_rapl: abstract RAPL common code intel_rapl: cleanup hardcoded MSR access intel_rapl: cleanup some functions intel_rapl: abstract register access operations intel_rapl: abstract register address intel_rapl: introduce struct rapl_if_private intel_rapl: introduce intel_rapl.h intel_rapl: remove hardcoded register index intel_rapl: use reg instead of msr cpufreq: imx-cpufreq-dt: Add i.MX8MN support ... -
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull more ACPI updates from Rafael Wysocki: "These get rid of two clang warnings, add a new quirk mechanism to the ACPI backlight driver (and apply it to one machine) and update the table load object initialization in ACPICA (this is a replacement for a previously reverted ACPICA commit). Specifics: - Make ACPI table loading work more consistently regardless of the exact mechanism used for loading a table (Erik Schmauss). - Get rid of two clang warnings (Arnd Bergmann). - Add new quirk mechanism to the ACPI backlight driver and use it to add a quirk for PB Easynote MZ35 (Hans de Goede)" * tag 'acpi-5.3-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: video: Add new hw_changes_brightness quirk, set it on PB Easynote MZ35 ACPI: fix false-positive -Wuninitialized warning ACPI: blacklist: fix clang warning for unused DMI table ACPICA: Update table load object initialization -
Linus Torvalds authored
Merge floppy ioctl verification fixes from Denis Efremov. This also marks the floppy driver as orphaned - it turns out that Jiri no longer has working hardware. Actual working physical floppy hardware is getting hard to find, and while Willy was able to test this, I think the driver can be considered pretty much dead from an actual hardware standpoint. The hardware that is still sold seems to be mainly USB-based, which doesn't use this legacy driver at all. The old floppy disk controller is still emulated in various VM environments, so the driver isn't going away, but let's see if anybody is interested to step up to maintain it. The lack of hardware also likely means that the ioctl range verification fixes are probably mostly relevant to anybody using floppies in a virtual environment. Which is probably also going away in favor of USB storage emulation, but who knows. Will Decon reviewed the patches but I'm not rebasing them just for that, so I'll add a Reviewed-by:Will Deacon <will@kernel.org> here instead. * floppy: MAINTAINERS: mark floppy.c orphaned floppy: fix out-of-bounds read in copy_buffer floppy: fix invalid pointer dereference in drive_name floppy: fix out-of-bounds read in next_valid_format floppy: fix div-by-zero in setup_format_params
-
Jiri Kosina authored
I volunteered myself to maintain it quite some time ago back when I fixed the concurrency issues which exhibited itself only with VM-emulated devices, and at the same time I still had the physical 3.5" reader to test all the changes. The reader doesn't work any more though, so I guess it's time to step down from this super-prestigious role :p and mark floppy.c as Orphaned. Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Rafael J. Wysocki authored
* acpi-misc: ACPI: fix false-positive -Wuninitialized warning ACPI: blacklist: fix clang warning for unused DMI table * acpi-video: ACPI: video: Add new hw_changes_brightness quirk, set it on PB Easynote MZ35
-
Rafael J. Wysocki authored
* pm-cpufreq: cpufreq: Make cpufreq_generic_init() return void cpufreq: imx-cpufreq-dt: Add i.MX8MN support cpufreq: Add QoS requests for userspace constraints cpufreq: intel_pstate: Reuse refresh_frequency_limits() cpufreq: Register notifiers with the PM QoS framework PM / QoS: Add support for MIN/MAX frequency constraints PM / QOS: Pass request type to dev_pm_qos_read_value() PM / QOS: Rename __dev_pm_qos_read_value() and dev_pm_qos_raw_read_value() PM / QOS: Pass request type to dev_pm_qos_{add|remove}_notifier()
-
- 17 Jul, 2019 33 commits
-
-
Denis Efremov authored
This fixes a global out-of-bounds read access in the copy_buffer function of the floppy driver. The FDDEFPRM ioctl allows one to set the geometry of a disk. The sect and head fields (unsigned int) of the floppy_drive structure are used to compute the max_sector (int) in the make_raw_rw_request function. It is possible to overflow the max_sector. Next, max_sector is passed to the copy_buffer function and used in one of the memcpy calls. An unprivileged user could trigger the bug if the device is accessible, but requires a floppy disk to be inserted. The patch adds the check for the .sect * .head multiplication for not overflowing in the set_geometry function. The bug was found by syzkaller. Signed-off-by:
Denis Efremov <efremov@ispras.ru> Tested-by:
Willy Tarreau <w@1wt.eu> Signed-off-by:
-
Denis Efremov authored
This fixes the invalid pointer dereference in the drive_name function of the floppy driver. The native_format field of the struct floppy_drive_params is used as floppy_type array index in the drive_name function. Thus, the field should be checked the same way as the autodetect field. To trigger the bug, one could use a value out of range and set the drive parameters with the FDSETDRVPRM ioctl. Next, FDGETDRVTYP ioctl should be used to call the drive_name. A floppy disk is not required to be inserted. CAP_SYS_ADMIN is required to call FDSETDRVPRM. The patch adds the check for a value of the native_format field to be in the '0 <= x < ARRAY_SIZE(floppy_type)' range of the floppy_type array indices. The bug was found by syzkaller. Signed-off-by:
-
Denis Efremov authored
This fixes a global out-of-bounds read access in the next_valid_format function of the floppy driver. The values from autodetect field of the struct floppy_drive_params are used as indices for the floppy_type array in the next_valid_format function 'floppy_type[DP->autodetect[probed_format]].sect'. To trigger the bug, one could use a value out of range and set the drive parameters with the FDSETDRVPRM ioctl. A floppy disk is not required to be inserted. CAP_SYS_ADMIN is required to call FDSETDRVPRM. The patch adds the check for values of the autodetect field to be in the '0 <= x < ARRAY_SIZE(floppy_type)' range of the floppy_type array indices. The bug was found by syzkaller. Signed-off-by:
-
Denis Efremov authored
This fixes a divide by zero error in the setup_format_params function of the floppy driver. Two consecutive ioctls can trigger the bug: The first one should set the drive geometry with such .sect and .rate values for the F_SECT_PER_TRACK to become zero. Next, the floppy format operation should be called. A floppy disk is not required to be inserted. An unprivileged user could trigger the bug if the device is accessible. The patch checks F_SECT_PER_TRACK for a non-zero value in the set_geometry function. The proper check should involve a reasonable upper limit for the .sect and .rate fields, but it could change the UAPI. The patch also checks F_SECT_PER_TRACK in the setup_format_params, and cancels the formatting operation in case of zero. The bug was found by syzkaller. Signed-off-by:
-
git://git.infradead.org/linux-platform-drivers-x86Linus Torvalds authored
Pull another x86 platform driver update from Andy Shevchenko: "Provide better naming for ABI, i.e. tell that we have fan boost mode. It won't break any ABI, but has to be done now to avoid confusion in the future" * tag 'platform-drivers-x86-v5.3-2' of git://git.infradead.org/linux-platform-drivers-x86: platform/x86: asus: Rename "fan mode" to "fan boost mode"
-
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linuxLinus Torvalds authored
Pull thermal management updates from Zhang Rui: - Convert thermal documents to ReST (Mauro Carvalho Chehab) - Fix a cyclic depedency in between thermal core and governors (Daniel Lezcano) - Fix processor_thermal_device driver to re-evaluate power limits after resume (Srinivas Pandruvada, Zhang Rui) * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: drivers: thermal: processor_thermal_device: Fix build warning docs: thermal: convert to ReST thermal/drivers/core: Use governor table to initialize thermal/drivers/core: Add init section table for self-encapsulation drivers: thermal: processor_thermal: Read PPCC on resume
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpioLinus Torvalds authored
Pull GPIO fixes from Linus Walleij: - Revert a SPIO GPIO fix that didn't fix anything but instead created new problems. - Remove the EM GPIO irqdomain in a safe manner. - Fix a memory leak in the gpio quirks. - Make the DaVinci error path silent on probe deferral. * tag 'gpio-v5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: Revert "gpio/spi: Fix spi-gpio regression on active high CS" gpio: em: remove the gpiochip before removing the irq domain gpiolib: of: fix a memory leak in of_gpio_flags_quirks() gpio: davinci: silence error prints in case of EPROBE_DEFER
-
git://github.com/andersson/remoteprocLinus Torvalds authored
Pull hwspinlock updates from Bjorn Andersson: "This contains support for hardware spinlock TI K3 AM65x and J721E family of SoCs, support for using hwspinlocks from atomic context and better error reporting when dealing with hardware disabled in DeviceTree" * tag 'hwlock-v5.3' of git://github.com/andersson/remoteproc: hwspinlock: add the 'in_atomic' API hwspinlock: document the hwspinlock 'raw' API hwspinlock: stm32: implement the relax() ops hwspinlock: ignore disabled device hwspinlock/omap: Add a trace during probe hwspinlock/omap: Add support for TI K3 SoCs dt-bindings: hwlock: Update OMAP binding for TI K3 SoCs
-
git://github.com/andersson/remoteprocLinus Torvalds authored
Pull remoteproc updates from Bjorn Andersson: "This adds support for the STM32 remoteproc, additional i.MX platforms with Cortex M4 remoteprocs and Qualcomm's QCS404 Compute DSP. Also initial support for vendor specific resource table entries and support for unprocessed Qualcomm firmware files" * tag 'rproc-v5.3' of git://github.com/andersson/remoteproc: remoteproc: stm32: fix building without ARM SMCC remoteproc: qcom: q6v5-mss: Fix build error without QCOM_MDT_LOADER remoteproc: copy parent dma_pfn_offset for vdev remoteproc: qcom: q6v5-mss: Support loading non-split images soc: qcom: mdt_loader: Support loading non-split images remoteproc: stm32: add an ST stm32_rproc driver dt-bindings: remoteproc: add bindings for stm32 remote processor driver dt-bindings: stm32: add bindings for ML-AHB interconnect remoteproc: Use struct_size() helper remoteproc: add vendor resources handling remoteproc: imx: Fix typo in "failed" remoteproc: imx: Broaden the Kconfig selection logic remoteproc,rpmsg: add missing MAINTAINERS file entries remoteproc: qcom: qdsp6-adsp: Add support for QCS404 CDSP dt-bindings: remoteproc: Rename and amend Hexagon v56 binding
-
git://github.com/andersson/remoteprocLinus Torvalds authored
Pull rpmsg updates from Bjorn Andersson: "This contains a DT binding update and a change to make the remote function of rpmsg_devices optional" * tag 'rpmsg-v5.3' of git://github.com/andersson/remoteproc: rpmsg: core: Make remove handler for rpmsg driver optional. dt-bindings: soc: qcom: Add remote-pid binding for GLINK SMEM
-
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds authored
Pull virtio, vhost updates from Michael Tsirkin: "Fixes, features, performance: - new iommu device - vhost guest memory access using vmap (just meta-data for now) - minor fixes" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio-mmio: add error check for platform_get_irq scsi: virtio_scsi: Use struct_size() helper iommu/virtio: Add event queue iommu/virtio: Add probe request iommu: Add virtio-iommu driver PCI: OF: Initialize dev->fwnode appropriately of: Allow the iommu-map property to omit untranslated devices dt-bindings: virtio: Add virtio-pci-iommu node dt-bindings: virtio-mmio: Add IOMMU description vhost: fix clang build warning vhost: access vq metadata through kernel virtual address vhost: factor out setting vring addr and num vhost: introduce helpers to get the size of metadata area vhost: rename vq_iotlb_prefetch() to vq_meta_prefetch() vhost: fine grain userspace memory accessors vhost: generalize adding used elem
-
git://github.com/awilliam/linux-vfioLinus Torvalds authored
Pull VFIO updates from Alex Williamson: - Static symbol cleanup in mdev samples (Kefeng Wang) - Use vma help in nvlink code (Peng Hao) - Remove unused code in mbochs sample (YueHaibing) - Send uevents around mdev registration (Alex Williamson) * tag 'vfio-v5.3-rc1' of git://github.com/awilliam/linux-vfio: mdev: Send uevents around parent device registration sample/mdev/mbochs: remove set but not used variable 'mdev_state' vfio: vfio_pci_nvlink2: use a vma helper function vfio-mdev/samples: make some symbols static
-
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linuxLinus Torvalds authored
Pull clk updates from Stephen Boyd: "This round of clk driver and framework updates is heavy on the driver update side. The two main highlights in the core framework are the addition of an bulk clk_get API that handles optional clks and an extra debugfs file that tells the developer about the current parent of a clk. The driver updates are dominated by i.MX in the diffstat, but that is mostly because that SoC has started converting to the clk_hw style of clk registration. The next big update is in the Amlogic meson clk driver that gained some support for audio, cpu, and temperature clks while fixing some PLL issues. Finally, the biggest thing that stands out is the conversion of a large part of the Allwinner sunxi-ng driver to the new clk parent scheme that uses less strings and more pointer comparisons to match clk parents and children up. In general, it looks like we have a lot of little fixes and tweaks here and there to clk data along with the normal addition of a handful of new drivers and a couple new core framework features. Core: - Add a 'clk_parent' file in clk debugfs - Add a clk_bulk_get_optional() API (with devm too) New Drivers: - Support gated clk controller on MIPS based BCM63XX SoCs - Support SiLabs Si5341 and Si5340 chips - Support for CPU clks on Raspberry Pi devices - Audsys clock driver for MediaTek MT8516 SoCs Updates: - Convert a large portion of the Allwinner sunxi-ng driver to new clk parent scheme - Small frequency support for SiLabs Si544 chips - Slow clk support for AT91 SAM9X60 SoCs - Remove dead code in various clk drivers (-Wunused) - Support for Marvell 98DX1135 SoCs - Get duty cycle of generic pwm clks - Improvement in mmc phase calculation and cleanup of some rate defintions - Switch i.MX6 and i.MX7 clock drivers to clk_hw based APIs - Add GPIO, SNVS and GIC clocks for i.MX8 drivers - Mark imx6sx/ul/ull/sll MMDC_P1_IPG and imx8mm DRAM_APB as critical clock - Correct imx7ulp nic1_bus_clk and imx8mm audio_pll2_clk clock setting - Add clks for new Exynos5422 Dynamic Memory Controller driver - Clock definition for Exynos4412 Mali - Add CMM (Color Management Module) clocks on Renesas R-Car H3, M3-N, E3, and D3 - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas RZ/G2M - Support for 32 bit clock IDs in TI's sci-clks for J721e SoCs - TI clock probing done from DT by default instead of firmware - Fix Amlogic Meson mpll fractional part and spread sprectrum issues - Add Amlogic meson8 audio clocks - Add Amlogic g12a temperature sensors clocks - Add Amlogic g12a and g12b cpu clocks - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas R-Car H3, M3-W, and M3-N - Add CMM (Color Management Module) clocks on Renesas R-Car M3-W - Add Clock Domain support on Renesas RZ/N1" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (190 commits) clk: consoldiate the __clk_get_hw() declarations clk: sprd: Add check for return value of sprd_clk_regmap_init() clk: lochnagar: Update DT binding doc to include the primary SPDIF MCLK clk: Add Si5341/Si5340 driver dt-bindings: clock: Add silabs,si5341 clk: clk-si544: Implement small frequency change support clk: add BCM63XX gated clock controller driver devicetree: document the BCM63XX gated clock bindings clk: at91: sckc: use dedicated functions to unregister clock clk: at91: sckc: improve error path for sama5d4 sck registration clk: at91: sckc: remove unnecessary line clk: at91: sckc: improve error path for sam9x5 sck register clk: at91: sckc: add support to free slow clock osclillator clk: at91: sckc: add support to free slow rc oscillator clk: at91: sckc: add support to free slow oscillator clk: rockchip: export HDMIPHY clock on rk3228 clk: rockchip: add watchdog pclk on rk3328 clk: rockchip: add clock id for hdmi_phy special clock on rk3228 clk: rockchip: add clock id for watchdog pclk on rk3328 clk: at91: sckc: add support for SAM9X60 ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linuxLinus Torvalds authored
Pull RTC updates from Alexandre Belloni: "A quiet cycle this time. - ds1307: properly handle oscillator failure flags - imx-sc: alarm support - pcf2123: alarm support, correct offset handling - sun6i: add R40 support - simplify getting the adapter of an i2c client" * tag 'rtc-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (37 commits) rtc: wm831x: Add IRQF_ONESHOT flag rtc: stm32: remove one condition check in stm32_rtc_set_alarm() rtc: pcf2123: Fix build error rtc: interface: Change type of 'count' from int to u64 rtc: pcf8563: Clear event flags and disable interrupts before requesting irq rtc: pcf8563: Fix interrupt trigger method rtc: pcf2123: fix negative offset rounding rtc: pcf2123: add alarm support rtc: pcf2123: use %ptR rtc: pcf2123: port to regmap rtc: pcf2123: remove sysfs register view rtc: rx8025: simplify getting the adapter of a client rtc: rx8010: simplify getting the adapter of a client rtc: rv8803: simplify getting the adapter of a client rtc: m41t80: simplify getting the adapter of a client rtc: fm3130: simplify getting the adapter of a client rtc: tegra: Drop MODULE_ALIAS rtc: sun6i: Add R40 compatible dt-bindings: rtc: sun6i: Add the R40 RTC compatible dt-bindings: rtc: Convert Allwinner A31 RTC to a schema ...
-
git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds authored
Pull dmaengine updates from Vinod Koul: - Add support in dmaengine core to do device node checks for DT devices and update bunch of drivers to use that and remove open coding from drivers - New driver/driver support for new hardware, namely: - MediaTek UART APDMA - Freescale i.mx7ulp edma2 - Synopsys eDMA IP core version 0 - Allwinner H6 DMA - Updates to axi-dma and support for interleaved cyclic transfers - Greg's debugfs return value check removals on drivers - Updates to stm32-dma, hsu, dw, pl330, tegra drivers * tag 'dmaengine-5.3-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (68 commits) dmaengine: Revert "dmaengine: fsl-edma: add i.mx7ulp edma2 version support" dmaengine: at_xdmac: check for non-empty xfers_list before invoking callback Documentation: dmaengine: clean up description of dmatest usage dmaengine: tegra210-adma: remove PM_CLK dependency dmaengine: fsl-edma: add i.mx7ulp edma2 version support dt-bindings: dma: fsl-edma: add new i.mx7ulp-edma dmaengine: fsl-edma-common: version check for v2 instead dmaengine: fsl-edma-common: move dmamux register to another single function dmaengine: fsl-edma: add drvdata for fsl-edma dmaengine: Revert "dmaengine: fsl-edma: support little endian for edma driver" dmaengine: rcar-dmac: Reject zero-length slave DMA requests dmaengine: dw: Enable iDMA 32-bit on Intel Elkhart Lake dmaengine: dw-edma: fix semicolon.cocci warnings dmaengine: sh: usb-dmac: Use [] to denote a flexible array member dmaengine: dmatest: timeout value of -1 should specify infinite wait dmaengine: dw: Distinguish ->remove() between DW and iDMA 32-bit dmaengine: fsl-edma: support little endian for edma driver dmaengine: hsu: Revert "set HSU_CH_MTSR to memory width" dmagengine: pl330: add code to get reset property dt-bindings: pl330: document the optional resets property ... -
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linuxLinus Torvalds authored
Pull MIPS updates from Paul Burton: "A light batch this time around but significant improvements for certain systems: - Removal of readq & writeq for MIPS32 kernels where they would simply BUG() anyway, allowing drivers or other code that #ifdefs on their presence to work properly. - Improvements for Ingenic JZ4740 systems, including support for the external memory controller & pinmuxing fixes for qi_lb60/NanoNote systems. - Improvements for Lantiq systems, in particular around SMP & IPIs. - DT updates for ralink/MediaTek MT7628a systems to probe & configure a bunch more devices. - Miscellaneous cleanups & build fixes" * tag 'mips_5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (30 commits) MIPS: fix some more fall through errors in arch/mips MIPS: perf events: handle switch statement falling through warnings mips/kprobes: Export kprobe_fault_handler() MAINTAINERS: Add myself as Ingenic SoCs maintainer MIPS: ralink: mt7628a.dtsi: Add watchdog controller DT node MIPS: ralink: mt7628a.dtsi: Add SPI controller DT node MIPS: ralink: mt7628a.dtsi: Add GPIO controller DT node MIPS: ralink: mt7628a.dtsi: Add pinctrl DT properties to the UART nodes MIPS: ralink: mt7628a.dtsi: Add pinmux DT node MIPS: ralink: mt7628a.dtsi: Add SPDX GPL-2.0 license identifier MIPS: lantiq: Add SMP support for lantiq interrupt controller MIPS: lantiq: Shorten register names, remove unused macros MIPS: lantiq: Fix bitfield masking MIPS: lantiq: Remove unused macros MIPS: lantiq: Fix attributes of of_device_id structure MIPS: lantiq: Change variables to the same type as the source MIPS: lantiq: Move macro directly to iomem function mips: Remove q-accessors from non-64bit platforms FDDI: defza: Include linux/io-64-nonatomic-lo-hi.h MIPS: configs: Remove useless UEVENT_HELPER_PATH ... -
git://git.sourceforge.jp/gitroot/uclinux-h8/linuxLinus Torvalds authored
Pull h8300 update from Yoshinori Sato: "Remove unused barrier defines" * tag 'h8300-for-linus-20190617' of git://git.sourceforge.jp/gitroot/uclinux-h8/linux: H8300: remove unused barrier defines
-
git://git.sourceforge.jp/gitroot/uclinux-h8/linuxLinus Torvalds authored
Pull SH updates from Yoshinori Sato. kprobe fix, defconfig updates and a SH Kconfig fix. * tag 'for-linus-20190617' of git://git.sourceforge.jp/gitroot/uclinux-h8/linux: arch/sh: Check for kprobe trap number before trying to handle a kprobe trap sh: configs: Remove useless UEVENT_HELPER_PATH Fix allyesconfig output.
-
Daniel Drake authored
The Asus WMI spec indicates that the function being controlled here is called "Fan Boost Mode". The user-facing documentation also calls it this. The spec uses the term "fan mode" is used to refer to other things, including functionality expected to appear on future products. We missed this before as we are not dealing with the most readable of specs, and didn't forsee any confusion around shortening the name. Rename "fan mode" to "fan boost mode" to improve consistency with the spec and to avoid a future naming conflict. There is no interface breakage here since this has yet to be included in an official kernel release. I also updated the kernel version listed under ABI accordingly. Signed-off-by:
Daniel Drake <drake@endlessm.com> Acked-by:
Yurii Pavlovskyi <yurii.pavlovskyi@gmail.com> Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-
Linus Torvalds authored
Merge more updates from Andrew Morton: "VM: - z3fold fixes and enhancements by Henry Burns and Vitaly Wool - more accurate reclaimed slab caches calculations by Yafang Shao - fix MAP_UNINITIALIZED UAPI symbol to not depend on config, by Christoph Hellwig - !CONFIG_MMU fixes by Christoph Hellwig - new novmcoredd parameter to omit device dumps from vmcore, by Kairui Song - new test_meminit module for testing heap and pagealloc initialization, by Alexander Potapenko - ioremap improvements for huge mappings, by Anshuman Khandual - generalize kprobe page fault handling, by Anshuman Khandual - device-dax hotplug fixes and improvements, by Pavel Tatashin - enable synchronous DAX fault on powerpc, by Aneesh Kumar K.V - add pte_devmap() support for arm64, by Robin Murphy - unify locked_vm accounting with a helper, by Daniel Jordan - several misc fixes core/lib: - new typeof_member() macro including some users, by Alexey Dobriyan - make BIT() and GENMASK() available in asm, by Masahiro Yamada - changed LIST_POISON2 on x86_64 to 0xdead000000000122 for better code generation, by Alexey Dobriyan - rbtree code size optimizations, by Michel Lespinasse - convert struct pid count to refcount_t, by Joel Fernandes get_maintainer.pl: - add --no-moderated switch to skip moderated ML's, by Joe Perches misc: - ptrace PTRACE_GET_SYSCALL_INFO interface - coda updates - gdb scripts, various" [ Using merge message suggestion from Vlastimil Babka, with some editing - Linus ] * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (100 commits) fs/select.c: use struct_size() in kmalloc() mm: add account_locked_vm utility function arm64: mm: implement pte_devmap support mm: introduce ARCH_HAS_PTE_DEVMAP mm: clean up is_device_*_page() definitions mm/mmap: move common defines to mman-common.h mm: move MAP_SYNC to asm-generic/mman-common.h device-dax: "Hotremove" persistent memory that is used like normal RAM mm/hotplug: make remove_memory() interface usable device-dax: fix memory and resource leak if hotplug fails include/linux/lz4.h: fix spelling and copy-paste errors in documentation ipc/mqueue.c: only perform resource calculation if user valid include/asm-generic/bug.h: fix "cut here" for WARN_ON for __WARN_TAINT architectures scripts/gdb: add helpers to find and list devices scripts/gdb: add lx-genpd-summary command drivers/pps/pps.c: clear offset flags in PPS_SETPARAMS ioctl kernel/pid.c: convert struct pid count to refcount_t drivers/rapidio/devices/rio_mport_cdev.c: NUL terminate some strings select: shift restore_saved_sigmask_unless() into poll_select_copy_remaining() select: change do_poll() to return -ERESTARTNOHAND rather than -EINTR ... -
Gustavo A. R. Silva authored
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; struct boo entry[]; }; size = sizeof(struct foo) + count * sizeof(struct boo); instance = kmalloc(size, GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = kmalloc(struct_size(instance, entry, count), GFP_KERNEL); Also, notice that variable size is unnecessary, hence it is removed. This code was detected with the help of Coccinelle. Link: http://lkml.kernel.org/r/20190604164226.GA13823@embeddedorSigned-off-by:Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Daniel Jordan authored
locked_vm accounting is done roughly the same way in five places, so unify them in a helper. Include the helper's caller in the debug print to distinguish between callsites. Error codes stay the same, so user-visible behavior does too. The one exception is that the -EPERM case in tce_account_locked_vm is removed because Alexey has never seen it triggered. [daniel.m.jordan@oracle.com: v3] Link: http://lkml.kernel.org/r/20190529205019.20927-1-daniel.m.jordan@oracle.com [sfr@canb.auug.org.au: fix mm/util.c] Link: http://lkml.kernel.org/r/20190524175045.26897-1-daniel.m.jordan@oracle.comSigned-off-by:
Daniel Jordan <daniel.m.jordan@oracle.com> Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Tested-by:
Alexey Kardashevskiy <aik@ozlabs.ru> Acked-by:
Alex Williamson <alex.williamson@redhat.com> Cc: Alan Tull <atull@kernel.org> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Christoph Lameter <cl@linux.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Moritz Fischer <mdf@kernel.org> Cc: Paul Mackerras <paulus@ozlabs.org> Cc: Steve Sistare <steven.sistare@oracle.com> Cc: Wu Hao <hao.wu@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Signed-off-by:
-
Robin Murphy authored
In order for things like get_user_pages() to work on ZONE_DEVICE memory, we need a software PTE bit to identify device-backed PFNs. Hook this up along with the relevant helpers to join in with ARCH_HAS_PTE_DEVMAP. [robin.murphy@arm.com: build fixes] Link: http://lkml.kernel.org/r/13026c4e64abc17133bbfa07d7731ec6691c0bcd.1559050949.git.robin.murphy@arm.com Link: http://lkml.kernel.org/r/817d92886fc3b33bcbf6e105ee83a74babb3a5aa.1558547956.git.robin.murphy@arm.comSigned-off-by:
Robin Murphy <robin.murphy@arm.com> Acked-by:
Will Deacon <will.deacon@arm.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Oliver O'Halloran <oohall@gmail.com> Signed-off-by:
-
Robin Murphy authored
ARCH_HAS_ZONE_DEVICE is somewhat meaningless in itself, and combined with the long-out-of-date comment can lead to the impression than an architecture may just enable it (since __add_pages() now "comprehends device memory" for itself) and expect things to work. In practice, however, ZONE_DEVICE users have little chance of functioning correctly without __HAVE_ARCH_PTE_DEVMAP, so let's clean that up the same way as ARCH_HAS_PTE_SPECIAL and make it the proper dependency so the real situation is clearer. Link: http://lkml.kernel.org/r/87554aa78478a02a63f2c4cf60a847279ae3eb3b.1558547956.git.robin.murphy@arm.comSigned-off-by:
Dan Williams <dan.j.williams@intel.com> Reviewed-by:
Ira Weiny <ira.weiny@intel.com> Acked-by:
Oliver O'Halloran <oohall@gmail.com> Reviewed-by:
Anshuman Khandual <anshuman.khandual@arm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: David Hildenbrand <david@redhat.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Robin Murphy authored
Refactor is_device_{public,private}_page() with is_pci_p2pdma_page() to make them all consistent in depending on their respective config options even when CONFIG_DEV_PAGEMAP_OPS is enabled for other reasons. This allows a little more compile-time optimisation as well as the conceptual and cosmetic cleanup. Link: http://lkml.kernel.org/r/187c2ab27dea70635d375a61b2f2076d26c032b0.1558547956.git.robin.murphy@arm.comSigned-off-by:Jerome Glisse <jglisse@redhat.com> Reviewed-by:
-
Aneesh Kumar K.V authored
Two architecture that use arch specific MMAP flags are powerpc and sparc. We still have few flag values common across them and other architectures. Consolidate this in mman-common.h. Also update the comment to indicate where to find HugeTLB specific reserved values Link: http://lkml.kernel.org/r/20190604090950.31417-1-aneesh.kumar@linux.ibm.comSigned-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Reviewed-by:
-
Aneesh Kumar K.V authored
This enables support for synchronous DAX fault on powerpc The generic changes are added as part of b6fb293f ("mm: Define MAP_SYNC and VM_SYNC flags") Without this, mmap returns EOPNOTSUPP for MAP_SYNC with MAP_SHARED_VALIDATE Instead of adding MAP_SYNC with same value to arch/powerpc/include/uapi/asm/mman.h, I am moving the #define to asm-generic/mman-common.h. Two architectures using mman-common.h directly are sparc and powerpc. We should be able to consloidate more #defines to mman-common.h. That can be done as a separate patch. Link: http://lkml.kernel.org/r/20190528091120.13322-1-aneesh.kumar@linux.ibm.comSigned-off-by:
Jan Kara <jack@suse.cz> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Pavel Tatashin authored
It is now allowed to use persistent memory like a regular RAM, but currently there is no way to remove this memory until machine is rebooted. This work expands the functionality to also allows hotremoving previously hotplugged persistent memory, and recover the device for use for other purposes. To hotremove persistent memory, the management software must first offline all memory blocks of dax region, and than unbind it from device-dax/kmem driver. So, operations should look like this: echo offline > /sys/devices/system/memory/memoryN/state ... echo dax0.0 > /sys/bus/dax/drivers/kmem/unbind Note: if unbind is done without offlining memory beforehand, it won't be possible to do dax0.0 hotremove, and dax's memory is going to be part of System RAM until reboot. Link: http://lkml.kernel.org/r/20190517215438.6487-4-pasha.tatashin@soleen.comSigned-off-by:
Pavel Tatashin <pasha.tatashin@soleen.com> Reviewed-by:
David Hildenbrand <david@redhat.com> Cc: James Morris <jmorris@namei.org> Cc: Sasha Levin <sashal@kernel.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Keith Busch <keith.busch@intel.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Ross Zwisler <zwisler@kernel.org> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Yaowei Bai <baiyaowei@cmss.chinamobile.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Dave Hansen <dave.hansen@intel.com> Signed-off-by:
-
Pavel Tatashin authored
Presently the remove_memory() interface is inherently broken. It tries to remove memory but panics if some memory is not offline. The problem is that it is impossible to ensure that all memory blocks are offline as this function also takes lock_device_hotplug that is required to change memory state via sysfs. So, between calling this function and offlining all memory blocks there is always a window when lock_device_hotplug is released, and therefore, there is always a chance for a panic during this window. Make this interface to return an error if memory removal fails. This way it is safe to call this function without panicking machine, and also makes it symmetric to add_memory() which already returns an error. Link: http://lkml.kernel.org/r/20190517215438.6487-3-pasha.tatashin@soleen.comSigned-off-by:
Michal Hocko <mhocko@suse.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov <bp@suse.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: Huang Ying <ying.huang@intel.com> Cc: James Morris <jmorris@namei.org> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Keith Busch <keith.busch@intel.com> Cc: Ross Zwisler <zwisler@kernel.org> Cc: Sasha Levin <sashal@kernel.org> Cc: Takashi Iwai <tiwai@suse.de> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Yaowei Bai <baiyaowei@cmss.chinamobile.com> Signed-off-by:
-
Pavel Tatashin authored
Patch series ""Hotremove" persistent memory", v6. Recently, adding a persistent memory to be used like a regular RAM was added to Linux. This work extends this functionality to also allow hot removing persistent memory. We (Microsoft) have an important use case for this functionality. The requirement is for physical machines with small amount of RAM (~8G) to be able to reboot in a very short period of time (<1s). Yet, there is a userland state that is expensive to recreate (~2G). The solution is to boot machines with 2G preserved for persistent memory. Copy the state, and hotadd the persistent memory so machine still has all 8G available for runtime. Before reboot, offline and hotremove device-dax 2G, copy the memory that is needed to be preserved to pmem0 device, and reboot. The series of operations look like this: 1. After boot restore /dev/pmem0 to ramdisk to be consumed by apps. and free ramdisk. 2. Convert raw pmem0 to devdax ndctl create-namespace --mode devdax --map mem -e namespace0.0 -f 3. Hotadd to System RAM echo dax0.0 > /sys/bus/dax/drivers/device_dax/unbind echo dax0.0 > /sys/bus/dax/drivers/kmem/new_id echo online_movable > /sys/devices/system/memoryXXX/state 4. Before reboot hotremove device-dax memory from System RAM echo offline > /sys/devices/system/memoryXXX/state echo dax0.0 > /sys/bus/dax/drivers/kmem/unbind 5. Create raw pmem0 device ndctl create-namespace --mode raw -e namespace0.0 -f 6. Copy the state that was stored by apps to ramdisk to pmem device 7. Do kexec reboot or reboot through firmware if firmware does not zero memory in pmem0 region (These machines have only regular volatile memory). So to have pmem0 device either memmap kernel parameter is used, or devices nodes in dtb are specified. This patch (of 3): When add_memory() fails, the resource and the memory should be freed. Link: http://lkml.kernel.org/r/20190517215438.6487-2-pasha.tatashin@soleen.com Fixes: c221c0b0 ("device-dax: "Hotplug" persistent memory for use like normal RAM") Signed-off-by:
Dave Hansen <dave.hansen@intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov <bp@suse.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: Huang Ying <ying.huang@intel.com> Cc: James Morris <jmorris@namei.org> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Keith Busch <keith.busch@intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Ross Zwisler <zwisler@kernel.org> Cc: Sasha Levin <sashal@kernel.org> Cc: Takashi Iwai <tiwai@suse.de> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Yaowei Bai <baiyaowei@cmss.chinamobile.com> Signed-off-by:
-
Tom Levy authored
Fix a few spelling and grammar errors, and two places where fast/safe in the documentation did not match the function. Link: http://lkml.kernel.org/r/20190321014452.13297-1-tomlevy93@gmail.comSigned-off-by:
Tom Levy <tomlevy93@gmail.com> Reviewed-by:
-
Kees Cook authored
Andreas Christoforou reported: UBSAN: Undefined behaviour in ipc/mqueue.c:414:49 signed integer overflow: 9 * 2305843009213693951 cannot be represented in type 'long int' ... Call Trace: mqueue_evict_inode+0x8e7/0xa10 ipc/mqueue.c:414 evict+0x472/0x8c0 fs/inode.c:558 iput_final fs/inode.c:1547 [inline] iput+0x51d/0x8c0 fs/inode.c:1573 mqueue_get_inode+0x8eb/0x1070 ipc/mqueue.c:320 mqueue_create_attr+0x198/0x440 ipc/mqueue.c:459 vfs_mkobj+0x39e/0x580 fs/namei.c:2892 prepare_open ipc/mqueue.c:731 [inline] do_mq_open+0x6da/0x8e0 ipc/mqueue.c:771 Which could be triggered by: struct mq_attr attr = { .mq_flags = 0, .mq_maxmsg = 9, .mq_msgsize = 0x1fffffffffffffff, .mq_curmsgs = 0, }; if (mq_open("/testing", 0x40, 3, &attr) == (mqd_t) -1) perror("mq_open"); mqueue_get_inode() was correctly rejecting the giant mq_msgsize, and preparing to return -EINVAL. During the cleanup, it calls mqueue_evict_inode() which performed resource usage tracking math for updating "user", before checking if there was a valid "user" at all (which would indicate that the calculations would be sane). Instead, delay this check to after seeing a valid "user". The overflow was real, but the results went unused, so while the flaw is harmless, it's noisy for kernel fuzzers, so just fix it by moving the calculation under the non-NULL "user" where it actually gets used. Link: http://lkml.kernel.org/r/201906072207.ECB65450@keescookSigned-off-by:Kees Cook <keescook@chromium.org> Reported-by:
Andreas Christoforou <andreaschristofo@gmail.com> Acked-by:
"Eric W. Biederman" <ebiederm@xmission.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Manfred Spraul <manfred@colorfullife.com> Signed-off-by:
-
Drew Davenport authored
For architectures using __WARN_TAINT, the WARN_ON macro did not print out the "cut here" string. The other WARN_XXX macros would print "cut here" inside __warn_printk, which is not called for WARN_ON since it doesn't have a message to print. Link: http://lkml.kernel.org/r/20190624154831.163888-1-ddavenport@chromium.org Fixes: a7bed27a ("bug: fix "cut here" location for __WARN_TAINT architectures") Signed-off-by:
Drew Davenport <ddavenport@chromium.org> Acked-by:
-
