- 03 Sep, 2013 21 commits
-
-
Chuck Lever authored
Signed-off-by:
Chuck Lever <chuck.lever@oracle.com> Signed-off-by:
Trond Myklebust <Trond.Myklebust@netapp.com>
-
Chuck Lever authored
Ensure OPEN_CONFIRM is not emitted while the transport is plugged. Signed-off-by:
-
Chuck Lever authored
Ensure RELEASE_LOCKOWNER is not emitted while the transport is plugged. Signed-off-by:
-
Chuck Lever authored
When CONFIG_NFS_V4_1 is disabled, the calls to nfs4_setup_sequence() and nfs4_sequence_done() are compiled out for the DELEGRETURN operation. To allow NFSv4.0 transport blocking to work for DELEGRETURN, these call sites have to be present all the time. Signed-off-by:
-
Chuck Lever authored
Plumb in a mechanism for plugging an NFSv4.0 mount, using the same infrastructure as NFSv4.1 sessions. Signed-off-by:
-
Chuck Lever authored
Anchor an nfs4_slot_table in the nfs_client for use with NFSv4.0 transport blocking. It is initialized only for NFSv4.0 nfs_client's. Introduce appropriate minor version ops to handle nfs_client initialization and shutdown requirements that differ for each minor version. Signed-off-by:
-
Chuck Lever authored
The nfs4_destroy_slot_tables() function is renamed to avoid confusion with the new helper. Signed-off-by:
-
Chuck Lever authored
Signed-off-by:
-
Chuck Lever authored
I'd like to re-use NFSv4.1's slot table machinery for NFSv4.0 transport blocking. Re-organize some of nfs4session.c so the slot table code is built even when NFS_V4_1 is disabled. Signed-off-by:
-
Chuck Lever authored
Clean up. Signed-off-by:
-
Chuck Lever authored
Refactor nfs4_call_sync_sequence() so it is used for NFSv4.0 now. The RPC callouts will house transport blocking logic similar to NFSv4.1 sessions. Signed-off-by:
-
Chuck Lever authored
NFSv4.0 will have need for this functionality when I add the ability to block NFSv4.0 traffic before migration recovery. I'm not really clear on why nfs4_set_sequence_privileged() gets a generic name, but nfs41_init_sequence() gets a minor version-specific name. Signed-off-by:
-
Chuck Lever authored
Clean up: Both the NFSv4.0 and NFSv4.1 version of nfs4_setup_sequence() are used only in fs/nfs/nfs4proc.c. No need to keep global header declarations for either version. Signed-off-by:
-
Chuck Lever authored
Clean up: rename nfs41_call_sync_data for use as a data structure common to all NFSv4 minor versions. Signed-off-by:
-
Chuck Lever authored
Clean up, since slot and sequence numbers are all unsigned anyway. Among other things, squelch compiler warnings: linux/fs/nfs/nfs4proc.c: In function ‘nfs4_setup_sequence’: linux/fs/nfs/nfs4proc.c:703:2: warning: signed and unsigned type in conditional expression [-Wsign-compare] and linux/fs/nfs/nfs4session.c: In function ‘nfs4_alloc_slot’: linux/fs/nfs/nfs4session.c:151:31: warning: signed and unsigned type in conditional expression [-Wsign-compare] Signed-off-by:
-
Trond Myklebust authored
If an NFS client does mkdir("dir"); fd = open("dir/file"); unlink("dir/file"); close(fd); rmdir("dir"); then the asynchronous nature of the sillyrename operation means that we can end up getting EBUSY for the rmdir() in the above test. Fix that by ensuring that we wait for any in-progress sillyrenames before sending the rmdir() to the server. Signed-off-by: -
Weston Andros Adamson authored
Commit 5ec16a85 introduced a regression that causes SECINFO to fail without actualy sending an RPC if: 1) the nfs_client's rpc_client was using KRB5i/p (now tried by default) 2) the current user doesn't have valid kerberos credentials This situation is quite common - as of now a sec=sys mount would use krb5i for the nfs_client's rpc_client and a user would hardly be faulted for not having run kinit. The solution is to use the machine cred when trying to use an integrity protected auth flavor for SECINFO. Older servers may not support using the machine cred or an integrity protected auth flavor for SECINFO in every circumstance, so we fall back to using the user's cred and the filesystem's auth flavor in this case. We run into another problem when running against linux nfs servers - they return NFS4ERR_WRONGSEC when using integrity auth flavor (unless the mount is also that flavor) even though that is not a valid error for SECINFO*. Even though it's against spec, handle WRONGSEC errors on SECINFO by falling back to using the user cred and the filesystem's auth flavor. Signed-off-by:
Weston Andros Adamson <dros@netapp.com> Signed-off-by:
-
Andy Adamson authored
Most of the time an error from the credops crvalidate function means the server has sent us a garbage verifier. The gss_validate function is the exception where there is an -EACCES case if the user GSS_context on the client has expired. Signed-off-by:
Andy Adamson <andros@netapp.com> Signed-off-by:
-
Andy Adamson authored
We must avoid buffering a WRITE that is using a credential key (e.g. a GSS context key) that is about to expire or has expired. We currently will paint ourselves into a corner by returning success to the applciation for such a buffered WRITE, only to discover that we do not have permission when we attempt to flush the WRITE (and potentially associated COMMIT) to disk. Use the RPC layer credential key timeout and expire routines which use a a watermark, gss_key_expire_timeo. We test the key in nfs_file_write. If a WRITE is using a credential with a key that will expire within watermark seconds, flush the inode in nfs_write_end and send only NFS_FILE_SYNC WRITEs by adding nfs_ctx_key_to_expire to nfs_need_sync_write. Note that this results in single page NFS_FILE_SYNC WRITEs. Signed-off-by:
-
Andy Adamson authored
This patch provides the RPC layer helper functions to allow NFS to manage data in the face of expired credentials - such as avoiding buffered WRITEs and COMMITs when the gss context will expire before the WRITEs are flushed and COMMITs are sent. These helper functions enable checking the expiration of an underlying credential key for a generic rpc credential, e.g. the gss_cred gss context gc_expiry which for Kerberos is set to the remaining TGT lifetime. A new rpc_authops key_timeout is only defined for the generic auth. A new rpc_credops crkey_to_expire is only defined for the generic cred. A new rpc_credops crkey_timeout is only defined for the gss cred. Set a credential key expiry watermark, RPC_KEY_EXPIRE_TIMEO set to 240 seconds as a default and can be set via a module parameter as we need to ensure there is time for any dirty data to be flushed. If key_timeout is called on a credential with an underlying credential key that will expire within watermark seconds, we set the RPC_CRED_KEY_EXPIRE_SOON flag in the generic_cred acred so that the NFS layer can clean up prior to key expiration. Checking a generic credential's underlying credential involves a cred lookup. To avoid this lookup in the normal case when the underlying credential has a key that is valid (before the watermark), a notify flag is set in the generic credential the first time the key_timeout is called. The generic credential then stops checking the underlying credential key expiry, and the underlying credential (gss_cred) match routine then checks the key expiration upon each normal use and sets a flag in the associated generic credential only when the key expiration is within the watermark. This in turn signals the generic credential key_timeout to perform the extra credential lookup thereafter. Signed-off-by:
-
Andy Adamson authored
The NFS layer needs to know when a key has expired. This change also returns -EKEYEXPIRED to the application, and the informative "Key has expired" error message is displayed. The user then knows that credential renewal is required. Signed-off-by:
-
- 02 Sep, 2013 2 commits
-
-
Trond Myklebust authored
Ensure that we set rpc_clnt->cl_parent before calling rpc_client_register so that rpcauth_create can find any existing RPCSEC_GSS caches for this transport. Signed-off-by: -
Trond Myklebust authored
Ensure that all struct rpc_clnt for any given socket/rdma channel share the same RPCSEC_GSS/krb5,krb5i,krb5p caches. Signed-off-by:
-
- 01 Sep, 2013 6 commits
-
-
Trond Myklebust authored
Ensure that if an rpc_clnt owns more than one RPCSEC_GSS-based authentication mechanism, then those caches will share the same 'gssd' upcall pipe. Signed-off-by: -
Trond Myklebust authored
Add support for looking up existing objects and creating new ones if there is no match. Signed-off-by: -
Trond Myklebust authored
It is now redundant. Signed-off-by: -
Trond Myklebust authored
Signed-off-by: -
Trond Myklebust authored
Signed-off-by: -
Trond Myklebust authored
Signed-off-by:
-
- 30 Aug, 2013 10 commits
-
-
Trond Myklebust authored
The current system requires everyone to set up notifiers, manage directory locking, etc. What we really want to do is have the rpc_client create its directory, and then create all the entries. This patch will allow the RPCSEC_GSS and NFS code to register all the objects that they want to have appear in the directory, and then have the sunrpc code call them back to actually create/destroy their pipefs dentries when the rpc_client creates/destroys the parent. Signed-off-by: -
Trond Myklebust authored
Ensure that __nfs_idmap_unregister can be called twice without consequences. Signed-off-by: -
Trond Myklebust authored
If an error condition occurs on rpc_pipefs creation, or the user mounts rpc_pipefs and then unmounts it, then the dentries in struct gss_auth need to be reset to NULL so that a second call to gss_pipes_dentries_destroy doesn't try to free them again. Signed-off-by: -
Trond Myklebust authored
Don't pass the rpc_client as a parameter, when what we really want is the net namespace. Signed-off-by: -
Trond Myklebust authored
The clnt->cl_principal is being used exclusively to store the service target name for RPCSEC_GSS/krb5 callbacks. Replace it with something that is stored only in the RPCSEC_GSS-specific code. Signed-off-by: -
Trond Myklebust authored
Optimise away gss_encode_msg: we don't need to look up the pipe version a second time. Save the gss target name in struct gss_auth. It is a property of the auth cache itself, and doesn't really belong in the rpc_client. Signed-off-by: -
Trond Myklebust authored
The directory name is _always_ clnt->cl_program->pipe_dir_name. Signed-off-by: -
Trond Myklebust authored
Signed-off-by: -
Trond Myklebust authored
It just duplicates the cl_program->name, and is not used in any fast paths where the extra dereference will cause a hit. Signed-off-by: -
Trond Myklebust authored
We don't want to pass the context argument to trace_nfs_atomic_open_exit() after it has been released. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
- 22 Aug, 2013 1 commit
-
-
NeilBrown authored
After reclaiming state that was lost, the NFS client tries to reclaim any locks, and then checks that each one has NFS_LOCK_INITIALIZED set (which means that the server has confirmed the lock). However if the client holds a delegation, nfs_reclaim_locks() simply aborts (or more accurately it called nfs_lock_reclaim() and that returns without doing anything). This is because when a delegation is held, the server doesn't need to know about locks. So if a delegation is held, NFS_LOCK_INITIALIZED is not expected, and its absence is certainly not an error. So don't print the warnings if NFS_DELGATED_STATE is set. Signed-off-by:
NeilBrown <neilb@suse.de> Signed-off-by:
-
