- 17 Oct, 2016 1 commit
-
-
Wang Nan authored
This patch helps with Sukadev's vendor event tree where such events can happen. >From Andi Kleen: Any event including a .c/.o/.bpf currently triggers BPF compilation or loading and then an error. This can happen for some Intel vendor events, which cannot be used. This patch fixes this problem by forbidding BPF file patch containing '{', '}' and ',', make sure flex consumes the leading '{', instead of matching it using a BPF file path. Tested result: $ perf stat -e '{unc_p_clockticks,unc_p_power_state_occupancy.cores_c0}' -a -I 1000 invalid or unsupported event: '{unc_p_clockticks,unc_p_power_state_occupancy.cores_c0}' Run 'perf list' for a list of valid events (as expected, interperted as event) $ perf stat -e 'aaa.c' -a -I 1000 ERROR: problems with path aaa.c: No such file or directory (as expected, interpreted as BPF source) $ perf stat -e 'aaa.ccc' -a -I 1000 invalid or unsupported event: 'aaa.ccc' (as expected, interpreted as event) $ perf stat -e '{aaa.c}' -a -I 1000 ERROR: problems with path aaa.c: No such file or directory event syntax error: '{aaa.c}' <SKIP> (as expected, interpreted as BPF source) $ perf stat -e '{cycles,aaa.c}' -a -I 1000 ERROR: problems with path aaa.c: No such file or directory event syntax error: '{cycles,aaa.c}' (as expected, interpreted as BPF source) Signed-off-by:Wang Nan <wangnan0@huawei.com> Tested-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Reported-by:
Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1475900185-37967-1-git-send-email-wangnan0@huawei.comSigned-off-by:
-
- 13 Oct, 2016 2 commits
-
-
Jiri Olsa authored
Sukadev reported segfault on releasing perf env's numa data. It's due to nr_numa_nodes being set no matter if the numa data gets parsed properly. The perf_env__exit crash the on releasing non existed data. Setting nr_numa_nodes only when data are parsed out properly. Signed-off-by:
Jiri Olsa <jolsa@kernel.org> Reported-by:
Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-dt9c0zgkt4hybn2cr4xiawta@git.kernel.orgSigned-off-by:
-
Namhyung Kim authored
Markus reported that 'perf top --hierarchy' cannot scroll down after refresh. This was because the number of entries are not updated when hierarchy is enabled. Unlike normal report view, hierarchy mode needs to keep its own entry count since it can have non-leaf entries which can expand/collapse. Reported-and-Tested-by:
Markus Trippelsdorf <markus@trippelsdorf.de> Signed-off-by:
Namhyung Kim <namhyung@kernel.org> Tested-by:
-
- 06 Oct, 2016 1 commit
-
-
Ingo Molnar authored
Merge tag 'perf-core-for-mingo-20161005' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: - Intel PT timestamp fixes (Adrian Hunter) - Fix Intel JSON fixed counter conversions (Andi Kleen) - Sync memcpy, cpufeatures and bpf headers with the kernel (Arnaldo Carvalho de Melo) - Add some more tool tips (Donghyun Kim, Kim SeonYoung, Nambong Ha) - Fix libtraceevent's kbuffer_read_at_offset() handling of offsets before or equal the first event (Namhyung Kim) - Fix uretprobe probe placement on ppc64le (Ravi Bangoria) - Support building C++ source files and add feature detection for g++, prep work for supporting a builtin clang/llvm, to remove the need for having that toolchain installed to automagically build BPF scriptlets that then gets uploaded to the kernel via sys_bpf() (Wang Nan) Signed-off-by:
Ingo Molnar <mingo@kernel.org>
-
- 05 Oct, 2016 13 commits
-
-
Wang Nan authored
Check if g++ is available. The result will be used by builtin clang and LLVM support. Since LLVM requires C++11, this feature detector checks std::move(). Signed-off-by:
-
Wang Nan authored
Add new rule to compile .cpp file to .o use g++. C++ support is required for built-in clang and LLVM support. Linker side support will be introduced by following commits. Signed-off-by:
-
Nambong Ha authored
Add two tips that describe --list option of config sub-command and explain how to choose particular config file location. Signed-off-by:
Nambong Ha <over3025@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Taeung Song <taeung@kosslab.kr> Link: http://lkml.kernel.org/r/1475191562-3240-1-git-send-email-over3025@gmail.comSigned-off-by:
-
Donghyun Kim authored
Signed-off-by:
Donghyun Kim <dongdong9335@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Taeung Song <taeung@kosslab.kr> Link: http://lkml.kernel.org/r/1475187357-21882-1-git-send-email-dongdong9335@gmail.comSigned-off-by:
-
Kim SeonYoung authored
There is a existing tip as below. If you have debuginfo enabled, try: perf report -s sym,srcline However this tip only describe a condition to use --sort sym,scrline options. So there is lack of explanation in the tip. I think that it would be better to add a tip that exactly explains the feature of --sort srcline. Signed-off-by:Seonyoung Kim <adamas0414@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Taeung Song <taeung@kosslab.kr> Link: http://lkml.kernel.org/r/1475194602-5596-1-git-send-email-adamas0414@gmail.comSigned-off-by:
-
Arnaldo Carvalho de Melo authored
Commit 747ea55e ("bpf: fix bpf_skb_in_cgroup helper naming") renames BPF_FUNC_skb_in_cgroup to bpf_skb_under_cgroup, triggering this warning while building perf: Warning: tools/include/uapi/linux/bpf.h differs from kernel Update the copy to ack that, no changes needed, as BPF_FUNC_skb_in_cgroup isn't used so far. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David Ahern <dsahern@gmail.com> Cc: David S. Miller <davem@davemloft.net> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-x67d2gq8ct6ko12ex14q8bbx@git.kernel.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
Due to ffb173e6 ("x86/mce: Drop X86_FEATURE_MCE_RECOVERY and the related model string test"), no changes needed in any other place as no tool uses X86_FEATURE_MCE_RECOVERY. Silences this detected drift when building tools/perf: Warning: tools/arch/x86/include/asm/cpufeatures.h differs from kernel Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-f3sfimg58t3cycbbl8f5cwxf@git.kernel.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
Commit 9a6fb28a ("x86/mce: Improve memcpy_mcsafe()") renames memcpy_mcsafe() to memcpy_mcsafe_unrolled(), making tools/arch/x86/lib/memcpy_64.S drift from the its kernel counterpart, triggering this warning in the perf build: Warning: tools/arch/x86/lib/memcpy_64.S differs from kernel Sync that copy to acknowledge that, no changes to 'perf bench' are needed, as this function is not used there. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-xfwc1raw8obyrctxerwt1bbb@git.kernel.orgSigned-off-by:
-
Andi Kleen authored
Intel fixed counters are special cases in the JSON conversion process because their decoding differs between perf and the event files. Add some missing entries in the conversion table. Signed-off-by:
-
Namhyung Kim authored
When it's called with an offset less than or equal to the first event, it'll return a garbage value since the data is not initialized. Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20161001101700.29146-1-namhyung@kernel.orgSigned-off-by:
-
Adrian Hunter authored
The MTC packet provides a 8-bit slice of CTC which is related to TSC by the TMA packet, however the TMA packet only provides the lower 16 bits of CTC. If mtc_shift > 8 then some of the MTC bits are not in the CTC provided by the TMA packet. Fix-up the last_mtc calculated from the TMA packet by copying the missing bits from the current MTC assuming the least difference between the two, and that the current MTC comes after last_mtc. Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: stable@vger.kernel.org # v4.3+ Link: http://lkml.kernel.org/r/1475062896-22274-2-git-send-email-adrian.hunter@intel.comSigned-off-by:
-
Adrian Hunter authored
In cycle-accurate mode, timestamps can be calculated from CYC packets. The decoder also estimates timestamps based on the number of instructions since the last timestamp. For that to work in cycle-accurate mode, the instruction count needs to be reset to zero when a timestamp is calculated from a CYC packet, but that wasn't happening, so fix it. Signed-off-by:
-
Ravi Bangoria authored
Perf uretprobe probes on GEP(Global Entry Point) which fails to record all function calls via LEP(Local Entry Point). Fix that by probing on LEP. Objdump: 00000000100005f0 <doit>: 100005f0: 02 10 40 3c lis r2,4098 100005f4: 00 7f 42 38 addi r2,r2,32512 100005f8: a6 02 08 7c mflr r0 100005fc: 10 00 01 f8 std r0,16(r1) 10000600: f8 ff e1 fb std r31,-8(r1) Before applying patch: $ cat /sys/kernel/debug/tracing/uprobe_events r:probe_uprobe_test/doit /home/ravi/uprobe_test:0x00000000000005f0 After applying patch: $ cat /sys/kernel/debug/tracing/uprobe_events r:probe_uprobe_test/doit /home/ravi/uprobe_test:0x00000000000005f8 This is not the case with kretprobes because the kernel itself finds LEP and probes on it. Signed-off-by:Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1475576865-6562-1-git-send-email-ravi.bangoria@linux.vnet.ibm.comSigned-off-by:
-
- 04 Oct, 2016 23 commits
-
-
Ingo Molnar authored
Merge tag 'perf-core-for-mingo-20161003' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/core improvements and fixes: - Allow vendors to provide JSON files describing PMU events, that then get parsed to generate C tables that are linked against perf, allowing the use of the names in their documentations, such as: # perf list l1d List of pre-defined events (to be used in -e): Cache: l1d.replacement [L1D data line replacements] l1d_pend_miss.fb_full [Cycles a demand request was blocked due to Fill Buffers inavailability] l1d_pend_miss.pending [L1D miss oustandings duration in cycles] l1d_pend_miss.pending_cycles [Cycles with L1D load Misses outstanding] l1d_pend_miss.pending_cycles_any [Cycles with L1D load Misses outstanding from any thread on physical core] l2_trans.l1d_wb [L1D writebacks that access L2 cache] Pipeline: cycle_activity.cycles_l1d_miss [Cycles while L1 cache miss demand load is outstanding] cycle_activity.cycles_l1d_pending [Cycles while L1 cache miss demand load is outstanding] cycle_activity.stalls_l1d_miss [Execution stalls while L1 cache miss demand load is outstanding] cycle_activity.stalls_l1d_pending [Execution stalls while L1 cache miss demand load is outstanding] The above example was done on a Broadwell based ThinkPad t450s after downloading and installing such JSON files which will be added to the tools/perf/pmu-events/ directory in a subsequent patchkit. Now one can use those names with -e/--event in all 'perf tools'. (Andi Kleen, Sukadev Bhattiprolu) - Add a missing pointer dereference in 'perf probe' (Colin Ian King) - Add support for building host programs to be used in generating files to be used in the build process, such as fixdep and jevents, fixing the usage of these features in a cross compilation setup (Jiri Olsa) Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull CPU hotplug updates from Thomas Gleixner: "Yet another batch of cpu hotplug core updates and conversions: - Provide core infrastructure for multi instance drivers so the drivers do not have to keep custom lists. - Convert custom lists to the new infrastructure. The block-mq custom list conversion comes through the block tree and makes the diffstat tip over to more lines removed than added. - Handle unbalanced hotplug enable/disable calls more gracefully. - Remove the obsolete CPU_STARTING/DYING notifier support. - Convert another batch of notifier users. The relayfs changes which conflicted with the conversion have been shipped to me by Andrew. The remaining lot is targeted for 4.10 so that we finally can remove the rest of the notifiers" * 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits) cpufreq: Fix up conversion to hotplug state machine blk/mq: Reserve hotplug states for block multiqueue x86/apic/uv: Convert to hotplug state machine s390/mm/pfault: Convert to hotplug state machine mips/loongson/smp: Convert to hotplug state machine mips/octeon/smp: Convert to hotplug state machine fault-injection/cpu: Convert to hotplug state machine padata: Convert to hotplug state machine cpufreq: Convert to hotplug state machine ACPI/processor: Convert to hotplug state machine virtio scsi: Convert to hotplug state machine oprofile/timer: Convert to hotplug state machine block/softirq: Convert to hotplug state machine lib/irq_poll: Convert to hotplug state machine x86/microcode: Convert to hotplug state machine sh/SH-X3 SMP: Convert to hotplug state machine ia64/mca: Convert to hotplug state machine ARM/OMAP/wakeupgen: Convert to hotplug state machine ARM/shmobile: Convert to hotplug state machine arm64/FP/SIMD: Convert to hotplug state machine ... -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq updates from Thomas Gleixner: "The irq departement proudly presents: - A rework of the core infrastructure to optimally spread interrupt for multiqueue devices. The first version was a bit naive and failed to take thread siblings and other details into account. Developed in cooperation with Christoph and Keith. - Proper delegation of softirqs to ksoftirqd, so if ksoftirqd is active then no further softirq processsing on interrupt return happens. Otherwise we try to delegate and still run another batch of network packets in the irq return path, which then tries to delegate to ksoftirqd ..... - A proper machine parseable sysfs based alternative for /proc/interrupts. - ACPI support for the GICV3-ITS and ARM interrupt remapping - Two new irq chips from the ARM SoC zoo: STM32-EXTI and MVEBU-PIC - A new irq chip for the JCore (SuperH) - The usual pile of small fixlets in core and irqchip drivers" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (42 commits) softirq: Let ksoftirqd do its job genirq: Make function __irq_do_set_handler() static ARM/dts: Add EXTI controller node to stm32f429 ARM/STM32: Select external interrupts controller drivers/irqchip: Add STM32 external interrupts support Documentation/dt-bindings: Document STM32 EXTI controller bindings irqchip/mips-gic: Use for_each_set_bit to iterate over local IRQs pci/msi: Retrieve affinity for a vector genirq/affinity: Remove old irq spread infrastructure genirq/msi: Switch to new irq spreading infrastructure genirq/affinity: Provide smarter irq spreading infrastructure genirq/msi: Add cpumask allocation to alloc_msi_entry genirq: Expose interrupt information through sysfs irqchip/gicv3-its: Use MADT ITS subtable to do PCI/MSI domain initialization irqchip/gicv3-its: Factor out PCI-MSI part that might be reused for ACPI irqchip/gicv3-its: Probe ITS in the ACPI way irqchip/gicv3-its: Refactor ITS DT init code to prepare for ACPI irqchip/gicv3-its: Cleanup for ITS domain initialization PCI/MSI: Setup MSI domain on a per-device basis using IORT ACPI table ACPI: Add new IORT functions to support MSI domain handling ... -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer updates from Thomas Gleixner: "A rather smalish set of updates for timers and timekeeping: - Two core fixes to prevent potential undefinded behaviour about which gcc is complaining rightfully. - A fix to prevent stopping the tick on an (soon) offline CPU so it can complete the shutdown procedure. - Wait for clocks to stabilize before making decisions, so a not yet validated clock is not rejected. - The usual pile of fixes to the various clocksource drivers. - Core code typo and include fixlets" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timekeeping: Include the correct header for errno definitions clocksource/drivers/ti-32k: Prevent ftrace recursion clocksource/mips-gic-timer: Stop checking cpu_has_counter clocksource/mips-gic-timer: Print an error if IRQ setup fails tick/nohz: Prevent stopping the tick on an offline CPU clocksource/drivers/oxnas: Add OX820 compatible clocksource/drivers/timer-atmel-pit: Simplify IRQ handler clocksource/drivers/timer-atmel-pit: Remove uselesss WARN_ON_ONCE clocksource/drivers/timer-atmel-pit: Drop at91sam926x_pit_common_init clocksource/drivers/moxart: Replace panic by pr_err clocksource/drivers/moxart: Replace setup_irq by request_irq clocksource/drivers/moxart: Add Aspeed support clocksource/drivers/moxart: Use struct to hold state clocksource/drivers/moxart: Refactor enable/disable time: Avoid undefined behaviour in ktime_add_safe() time: Avoid undefined behaviour in timespec64_add_safe() timekeeping: Prints the amounts of time spent during suspend clocksource: Defer override invalidation unless clock is unstable hrtimer: Spelling fixes -
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arcLinus Torvalds authored
Pull ARC updates from Vineet Gupta: - ARCv2 support for native 64-bit atomics using LLOCK/SCONDD instructions - Support for upcoming 3.0 release of HS38 cores - Dwarf unwindinder improvements: - enable unwinding of hand written assembler code using CFI pseudo-ops - switch to .eh_frame (as opposed to historic .debug_frame) - get rid of a bunch of adhoc band-aids in the process - Misc fixes: - perf supporting generic cache-references and cache-misses (Alexey) - default NODE_SHIFT (Noam Camus) - usage of KFLAG instruction to set IE (Yuriy) - Platforms: - Add "model" property across the DT (Alexey) - Enable MODULE_* in defconfigs * tag 'arc-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: [plat*] enables MODULE* ARCv2: fix local_save_flags ARC: CONFIG_NODES_SHIFT fix default values ARCv2: intc: Use kflag if STATUS32.IE must be reset ARC: .exit.* sections can be discarded in .eh_frame regime ARC: dw2 unwind: enable cfi pseudo ops in string lib ARC: dw2 unwind: add infrastructure for adding cfi pseudo ops to asm ARC: entry: make ret_from_system_call local label ARC: dw2 unwind: don't force dwarf 2 ARC: dw2 unwind: switch to .eh_frame based unwinding ARC: dw2 unwind: factor CIE specifics for .eh_frame/.debug_frame ARC: module: support R_ARC_32_PCREL relocation arc: perf: Enable generic "cache-references" and "cache-misses" events ARC: [plat-eznps] add missing atomic_fetch_xxx operations ARCv2: Implement atomic64 based on LLOCKD/SCONDD instructions ARCv2: Support dynamic peripheral address space in HS38 rel 3.0 cores ARCv2: identify HS38 rel 3.0 cores ARCv2: Add support for ZeBu Emulation platform for HS cores arc: Add "model" properly in device tree description of all boards -
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68kLinus Torvalds authored
Pull m68k updates from Geert Uytterhoeven: - cleanups - defconfig updates - GPG fingerprint update * tag 'm68k-for-v4.9-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: Migrate exception table users off module.h and onto extable.h CREDITS: Update fingerprint for Geert Uytterhoeven m68k: Use IS_ENABLED() instead of checking for built-in or module m68k/defconfig: Update defconfigs for v4.8-rc1
-
Andi Kleen authored
Add support for the "frontend" extra MSR on Skylake in the JSON conversion. Signed-off-by:
-
Andi Kleen authored
The JSON event lists use a different encoding for fixed counters than perf for instructions and cycles (ref-cycles is ok) This lead to some common events like inst_retired.any or cpu_clk_unhalted.thread not counting, when specified with their JSON name. Special case these events in the jevents conversion process. I prefer to not touch the JSON files for this, as it's intended that standard JSON files can be just dropped into the perf build without changes. Signed-off-by:
-
Andi Kleen authored
Make alias matching the events parser case-insensitive. This is useful with the JSON events. perf uses lower case events, but the CPU manuals generally use upper case event names. The JSON files use lower case by default too. But if we search case insensitively then users can cut-n-paste the upper case event names. So the following works: % perf stat -e BR_INST_EXEC.TAKEN_INDIRECT_NEAR_CALL true Performance counter stats for 'true': 305 BR_INST_EXEC.TAKEN_INDIRECT_NEAR_CALL 0.000492799 seconds time elapsed Signed-off-by: -
Sukadev Bhattiprolu authored
This avoids the JSON PMU events parser having to know whether its aliases are for perf stat or perf record. Signed-off-by:
-
Sukadev Bhattiprolu authored
Signed-off-by:
Jiri Olsa <jolsa@redhat.com> Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: linuxppc-dev@lists.ozlabs.org Link: http://lkml.kernel.org/r/1473978296-20712-16-git-send-email-sukadev@linux.vnet.ibm.comSigned-off-by:
-
Andi Kleen authored
Add support to group the output of perf list by the Topic field in the JSON file. Example output: % perf list ... Cache: l1d.replacement [L1D data line replacements] l1d_pend_miss.pending [L1D miss oustandings duration in cycles] l1d_pend_miss.pending_cycles [Cycles with L1D load Misses outstanding] l2_l1d_wb_rqsts.all [Not rejected writebacks from L1D to L2 cache lines in any state] l2_l1d_wb_rqsts.hit_e [Not rejected writebacks from L1D to L2 cache lines in E state] l2_l1d_wb_rqsts.hit_m [Not rejected writebacks from L1D to L2 cache lines in M state] ... Pipeline: arith.fpu_div [Divide operations executed] arith.fpu_div_active [Cycles when divider is busy executing divide operations] baclears.any [Counts the total number when the front end is resteered, mainly when the BPU cannot provide a correct prediction and this is corrected by other branch handling mechanisms at the front end] br_inst_exec.all_branches [Speculative and retired branches] br_inst_exec.all_conditional [Speculative and retired macro-conditional branches] br_inst_exec.all_direct_jmp [Speculative and retired macro-unconditional branches excluding calls and indirects] br_inst_exec.all_direct_near_call [Speculative and retired direct near calls] br_inst_exec.all_indirect_jump_non_call_ret Signed-off-by: -
Sukadev Bhattiprolu authored
Previously we were dropping the useful longer descriptions that some events have in the event list completely. This patch makes them appear with perf list. Old perf list: baclears: baclears.all [Counts the number of baclears] vs new: perf list -v: ... baclears: baclears.all [The BACLEARS event counts the number of times the front end is resteered, mainly when the Branch Prediction Unit cannot provide a correct prediction and this is corrected by the Branch Address Calculator at the front end. The BACLEARS.ANY event counts the number of baclears for any type of branch] Signed-off-by: -
Sukadev Bhattiprolu authored
Implement support in jevents to parse long descriptions for events that may have them in the JSON files. A follow on patch will make this long description available to user through the 'perf list' command. Signed-off-by:
-
Andi Kleen authored
Add a PERF_CPUID variable to override the CPUID of the current CPU (within the current architecture). This is useful for testing, so that all event lists can be tested on a single system. Signed-off-by:
-
Andi Kleen authored
Add a --no-desc flag to 'perf list' to not print the event descriptions that were earlier added for JSON events. This may be useful to get a less crowded listing. It's still default to print descriptions as that is the more useful default for most users. Signed-off-by:
-
Andi Kleen authored
Automatically adapt the now wider and word wrapped perf list output to wider terminals. This requires querying the terminal before the auto pager takes over, and exporting this information from the pager subsystem. Signed-off-by:
-
Andi Kleen authored
Add support to print alias descriptions in perf list, which are taken from the generated event files. The sorting code is changed to put the events with descriptions at the end. The descriptions are printed as possibly multiple word wrapped lines. Example output: % perf list ... arith.fpu_div [Divide operations executed] arith.fpu_div_active [Cycles when divider is busy executing divide operations] Committer notes: Further testing on a Broadwell machine (ThinkPad t450s), using these files: $ find tools/perf/pmu-events/arch/x86/ tools/perf/pmu-events/arch/x86/ tools/perf/pmu-events/arch/x86/Broadwell tools/perf/pmu-events/arch/x86/Broadwell/Cache.json tools/perf/pmu-events/arch/x86/Broadwell/Other.json tools/perf/pmu-events/arch/x86/Broadwell/Frontend.json tools/perf/pmu-events/arch/x86/Broadwell/Virtual-Memory.json tools/perf/pmu-events/arch/x86/Broadwell/Pipeline.json tools/perf/pmu-events/arch/x86/Broadwell/Floating-point.json tools/perf/pmu-events/arch/x86/Broadwell/Memory.json tools/perf/pmu-events/arch/x86/mapfile.csv $ Taken from: https://github.com/sukadev/linux/tree/json-code+data-v21/tools/perf/pmu-events/arch/x86/ to get this machinery to actually parse JSON files, generate $(OUTPUT)pmu-events/pmu-events.c, compile it and link it with perf, that will then use the table it contains, these files will be submitted right after this patchkit. [acme@jouet linux]$ perf list page_walker List of pre-defined events (to be used in -e): page_walker_loads.dtlb_l1 [Number of DTLB page walker hits in the L1+FB] page_walker_loads.dtlb_l2 [Number of DTLB page walker hits in the L2] page_walker_loads.dtlb_l3 [Number of DTLB page walker hits in the L3 + XSNP] page_walker_loads.dtlb_memory [Number of DTLB page walker hits in Memory] page_walker_loads.itlb_l1 [Number of ITLB page walker hits in the L1+FB] page_walker_loads.itlb_l2 [Number of ITLB page walker hits in the L2] page_walker_loads.itlb_l3 [Number of ITLB page walker hits in the L3 + XSNP] [acme@jouet linux]$ Signed-off-by: -
Andi Kleen authored
To work with existing mapfiles, assume that the first line in 'mapfile.csv' is a header line and skip over it. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 vdso updates from Ingo Molnar: "The main changes in this cycle centered around adding support for 32-bit compatible C/R of the vDSO on 64-bit kernels, by Dmitry Safonov" * 'x86-vdso-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/vdso: Use CONFIG_X86_X32_ABI to enable vdso prctl x86/vdso: Only define map_vdso_randomized() if CONFIG_X86_64 x86/vdso: Only define prctl_map_vdso() if CONFIG_CHECKPOINT_RESTORE x86/signal: Add SA_{X32,IA32}_ABI sa_flags x86/ptrace: Down with test_thread_flag(TIF_IA32) x86/coredump: Use pr_reg size, rather that TIF_IA32 flag x86/arch_prctl/vdso: Add ARCH_MAP_VDSO_* x86/vdso: Replace calculate_addr in map_vdso() with addr x86/vdso: Unmap vdso blob on vvar mapping failure
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 timer updates from Ingo Molnar: "This tree includes a HPET overhead micro-optimization plus new TSC frequencies for newer Intel CPUs" * 'x86-timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/tsc: Add additional Intel CPU models to the crystal quirk list x86/tsc: Use cpu id defines instead of hex constants x86/hpet: Reduce HPET counter read contention
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 platform changes from Ingo Molnar: "The main changes in this cycle were: - SGI UV updates (Andrew Banman) - Intel MID updates (Andy Shevchenko) - Initial Mellanox systems platform (Vadim Pasternak)" * 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/platform/mellanox: Fix return value check in mlxplat_init() x86/platform/mellanox: Introduce support for Mellanox systems platform x86/platform/uv/BAU: Add UV4-specific functions x86/platform/uv/BAU: Fix payload queue setup on UV4 hardware x86/platform/uv/BAU: Disable software timeout on UV4 hardware x86/platform/uv/BAU: Populate ->uvhub_version with UV4 version information x86/platform/uv/BAU: Use generic function pointers x86/platform/uv/BAU: Add generic function pointers x86/platform/uv/BAU: Convert uv_physnodeaddr() use to uv_gpa_to_offset() x86/platform/uv/BAU: Clean up pq_init() x86/platform/uv/BAU: Clean up and update printks x86/platform/uv/BAU: Clean up vertical alignment x86/platform/intel-mid: Keep SRAM powered on at boot x86/platform/intel-mid: Add Intel Penwell to ID table x86/cpu: Rename Merrifield2 to Moorefield x86/platform/intel-mid: Implement power off sequence x86/platform/intel-mid: Enable SD card detection on Merrifield x86/platform/intel-mid: Enable WiFi on Intel Edison x86/platform/intel-mid: Run PWRMU command immediately
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 cleanups from Ingo Molnar: "Header file and a wrapper functions cleanup" * 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Migrate exception table users off module.h and onto extable.h x86: Clean up various simple wrapper functions
-
