- 23 Mar, 2007 26 commits
-
-
Divy Le Ray authored
The driver attempts to upgrade the FW if the card has the wrong version. Signed-off-by:
Divy Le Ray <divy@chelsio.com> Signed-off-by:
Jeff Garzik <jeff@garzik.org>
-
Divy Le Ray authored
Limit ethtool -g/-G to the given port's queues. Signed-off-by:
-
Anton Blanchard authored
We assign the return value of register_netdev to i, but return rc later on. Fix it. Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
-
Stephen Hemminger authored
Rather than a workqueue and a per-board mutex to control PHY, use a tasklet and spinlock. Tasklet is lower overhead and works just as well for this. Signed-off-by:
Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by:
-
Stephen Hemminger authored
Wheen a port on the skge driver is not used, it should mask off interrupts from theat port. Signed-off-by:
-
Stephen Hemminger authored
The skge driver will deadlock if gets a transmit timeout because the netif_tx_lock() is already held. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: [CIFS] Allow reset of file to ATTR_NORMAL when archive bit not set [CIFS] Do not negotiate new POSIX_PATH_OPERATIONS_CAP yet [CIFS] reset mode when client notices that ATTR_READONLY is no longer set
-
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6Linus Torvalds authored
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: ACPI: IA64: fix %ll build warnings ACPI: IA64: fix allnoconfig build ACPI: Only use IPI on known broken machines (AMD, Dothan/BaniasPentium M) ACPI: ibm-acpi: allow module to load when acpi notifiers can't be set (v2) ACPI: parse 2nd MADT by default ACPICA: revert "acpi_serialize" changes sony-laptop: MAINTAINERS fix entry, add L: and W: ACPI: resolve HP nx6125 S3 immediate wakeup regression ACPI: Add support to parse 2nd MADT
-
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpcLinus Torvalds authored
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: [POWERPC] Bypass hcall stats until cpu features have run [POWERPC] Avoid hypervisor statistics calculation in real mode [POWERPC] Fix atomicity of TIF update in flush_thread()
-
Ingo Molnar authored
latest -git triggers an irqtrace/lockdep warning of a leaked irqs-off condition: BUG: at kernel/fork.c:1033 copy_process() after some debugging it turns out that commit ca1b940c accidentally left interrupts disabled - which trickled down all the way to the first time we fork a kernel thread and triggered the warning. the fix is to re-enable interrupts in the 'else' branch of setup_boot_APIC_clock()'s pmtimers calibration path. Reported-by:
Michal Piotrowski <michal.k.k.piotrowski@gmail.com> Signed-off-by:
Ingo Molnar <mingo@elte.hu> Acked-by:
Thomas Gleixner <tglx@brown.paperbag.linutronix.de> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Jarek Poplawski authored
lockdep's data shouldn't be used when debug_locks == 0 because it's not updated after this, so it's more misleading than helpful. PS: probably lockdep's current-> fields should be reset after it turns debug_locks off: so, after printing a bug report, but before return from exported functions, but there are really a lot of these possibilities (e.g. after DEBUG_LOCKS_WARN_ON), so, something could be missed. (Of course direct use of this fields isn't recommended either.) Reported-by:
Folkert van Heusden <folkert@vanheusden.com> Inspired-by:
Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by:
Jarek Poplawski <jarkao2@o2.pl> Acked-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Rafael J. Wysocki authored
Since freezable workqueues are broken in 2.6.21-rc (cf. http://marc.theaimsgroup.com/?l=linux-kernel&m=116855740612755, http://marc.theaimsgroup.com/?l=linux-kernel&m=117261312523921&w=2) it's better to change the only user of them, which is XFS, to use "normal" nonfreezable workqueues. Signed-off-by:
Rafael J. Wysocki <rjw@sisk.pl> Cc: Pavel Machek <pavel@ucw.cz> Cc: David Chinner <dgc@sgi.com> Signed-off-by:
-
Jarek Poplawski authored
lockdep found a bug during a run of workqueue function - this could be also caused by a bug from other code running simultaneously. lockdep really shouldn't be used when debug_locks == 0! Reported-by:
-
Pavel Machek authored
It causes extra moon icons blinking on x60, and breaks at least two other systems. During resume, we do not know that "reboot"/"shutdown" method was used, so we assume "plaform" and call BIOS, anyway... This is 2.6.21 material, and should fix 2 or 3 regressions from 2.6.20. Signed-off-by:
Pavel Machek <pavel@suse.cz> Acked-by:
-
David Howells authored
Make the SYSV SHM nattch counter work correctly by forcing multiple VMAs to be produced to represent MAP_SHARED segments, even if they overlap exactly. Using this test program: http://people.redhat.com/~dhowells/doshm.c Run as: doshm sysv I can see nattch going from one before the patch: # /doshm sysv Command: sysv shmid: 65536 memory: 0xc3700000 c0b00000-c0b04000 rw-p 00000000 00:00 0 c0bb0000-c0bba788 r-xs 00000000 00:0b 14582157 /lib/ld-uClibc-0.9.28.so c3180000-c31dede4 r-xs 00000000 00:0b 14582179 /lib/libuClibc-0.9.28.so c3520000-c352278c rw-p 00000000 00:0b 13763417 /doshm c3584000-c35865e8 r-xs 00000000 00:0b 13763417 /doshm c3588000-c358aa00 rw-p 00008000 00:0b 14582157 /lib/ld-uClibc-0.9.28.so c3590000-c359b6c0 rw-p 00000000 00:00 0 c3620000-c3640000 rwxp 00000000 00:00 0 c3700000-c37fa000 rw-S 00000000 00:06 1411 /SYSV00000000 (deleted) c3700000-c37fa000 rw-S 00000000 00:06 1411 /SYSV00000000 (deleted) nattch 1 To two after the patch: # /doshm sysv Command: sysv shmid: 0 memory: 0xc3700000 c0bb0000-c0bba788 r-xs 00000000 00:0b 14582157 /lib/ld-uClibc-0.9.28.so c3180000-c31dede4 r-xs 00000000 00:0b 14582179 /lib/libuClibc-0.9.28.so c3320000-c3340000 rwxp 00000000 00:00 0 c3530000-c35325e8 r-xs 00000000 00:0b 13763417 /doshm c3534000-c353678c rw-p 00000000 00:0b 13763417 /doshm c3538000-c353aa00 rw-p 00008000 00:0b 14582157 /lib/ld-uClibc-0.9.28.so c3590000-c359b6c0 rw-p 00000000 00:00 0 c35a4000-c35a8000 rw-p 00000000 00:00 0 c3700000-c37fa000 rw-S 00000000 00:06 1369 /SYSV00000000 (deleted) c3700000-c37fa000 rw-S 00000000 00:06 1369 /SYSV00000000 (deleted) nattch 2 That's +1 to nattch for each shmat() made. Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
David Howells authored
Supply a get_unmapped_area() to fix NOMMU SYSV SHM support. Signed-off-by:
Adam Litke <agl@us.ibm.com> Signed-off-by:
-
David Howells authored
Fix unannotated variable declarations. Variables that have allocation section annotations (such as __meminitdata) on their definitions must also have them on their declarations as not doing so may affect the addressing mode used by the compiler and may result in a linker error. Signed-off-by:
Yasunori Goto <y-goto@jp.fujitsu.com> Signed-off-by:
-
Thomas Gleixner authored
The local APIC timer stops to work in deeper C-States. This is handled by the ACPI code and a broadcast mechanism in the clockevents / tick managment code. Some systems do not expose the deeper C-States to the kernel, but switch into deeper C-States behind the kernels back. This delays the local apic timer interrupts for ever and makes the systems unusable. Add a command line option to disable the local apic timer and a dmi quirk for known broken systems. Andi sayeth: While not wrong by itself i think it is still better to use some heuristic -- like "has battery in ACPI" With the DMI table if the problem is more wide spread we will just continue extending it. But anyways should be ok now for .21 although I'm not really happy with it. Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Acked-by:
Andi Kleen <ak@suse.de> Cc: Len Brown <lenb@kernel.org> Signed-off-by:
-
Rafael J. Wysocki authored
The SNAPSHOT_S2RAM ioctl does not disable the nonboot CPUs before entering the suspend, although it should do this. Signed-off-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
-
Johannes Weiner authored
I added the 'Q' to list. A short description in the `Ok, so what can I use them for'-section, on when or why to use it would be nice! Signed-off-by:
Johannes Weiner <hannes-kernel@saeurebad.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Adrian Bunk authored
NULL checks should be before the first dereference. Spotted by the Coverity checker. Signed-off-by:
Adrian Bunk <bunk@stusta.de> Acked-by:
Ondrej Zajicek <santiago@crfreenet.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
git://jdelvare.pck.nerim.net/jdelvare-2.6Linus Torvalds authored
* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: i2c/ds1374: Check workqueue creation status i2c-i801: Restore the device state before leaving i2c-amd8111: Missed cleanup
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [NETFILTER]: nat: avoid rerouting packets if only XFRM policy key changed [NETFILTER]: nf_conntrack_netlink: add missing dependency on NF_NAT [NET]: fix up misplaced inlines. [SCTP]: Correctly reset ssthresh when restarting association [BRIDGE]: Fix fdb RCU race [NET]: Fix fib_rules dump race [XFRM]: ipsecv6 needs a space when printing audit record. [X25] x25_forward_call(): fix NULL dereferences [SCTP]: Reset some transport and association variables on restart [SCTP]: Increment error counters on user requested HBs. [SCTP]: Clean up stale data during association restart [IrDA]: Calling ppp_unregister_channel() from process context [IrDA]: irttp_dup spin_lock initialisation [IrDA]: Delay needed when uploading firmware chunks
-
Linus Torvalds authored
* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband: IB/ipoib: Fix thinko in packet length checks IPoIB: Fix use-after-free in path_rec_completion() IB/ehca: Make scaling code work without CPU hotplug RDMA/cxgb3: Handle build_phys_page_list() failure in iwch_reregister_phys_mem() IB/ipath: Check return value of lookup_one_len IPoIB: Fix race in detaching from mcast group before attaching IPoIB/cm: Fix reaping of stale connections
-
Thomas Gleixner authored
The PIT has no dedicated mode for shut down. The only way to disable PIT is to put it into one shot mode. AMD implementations of PIT on Geode (also observed on Cyrix) are confused by an "empty" transition from CLOCK_EVT_MODE_UNUSED to CLOCK_EVT_MODE_SHUTDOWN, which puts the PIT into one shot mode momentarily. I realized after staring helpless at the bug report http://bugzilla.kernel.org/show_bug.cgi?id=8027 for quite a while, that the only change, which might influence the bogomips calibration, is the above transition during the PIT initialization. Avoiding the unnecessary switch to oneshot and later to periodic mode fixes the weird bogomips value and also the resulting slowness. The fix is confirmed on OLPC and another Geode based box. Note: this is unrelated to the Dual Core problem discussed here: http://lkml.org/lkml/2007/3/17/48Signed-off-by:
-
Steve French authored
When a file had a dos attribute of 0x1 (readonly - but dos attribute of archive was not set) - doing chmod 0777 or equivalent would try to set a dos attribute of 0 (which some servers ignore) rather than ATTR_NORMAL (0x20) which most servers accept. Does not affect servers which support the CIFS Unix Extensions. Acked-by:
Prasad Potluri <pvp@us.ibm.com> Acked-by:
Shirish Pargaonkar <shirishp@us.ibm.com> Signed-off-by:
Steve French <sfrench@us.ibm.com>
-
- 22 Mar, 2007 14 commits
-
-
Michael S. Tsirkin authored
The packet length checks in ipoib are broken: we add 4 bytes (IPoIB encapsulation header) when sending a packet, not 20 bytes (hardware address length) to each packet. Therefore, if connected mode is enabled so that the interface MTU is larger than the multicast MTU, IPoIB may end up trying to send too-long multicast packets. For example, multicast is broken if a message of size 2048 bytes is sent on an interface with UD MTU 2048, because 2048 is bigger than the real limit of 2044 but the code tests against the wrong limit of 2060. This patch fixes <https://bugs.openfabrics.org/show_bug.cgi?id=418>, submitted by Scott Weitzenkamp <sweitzen@cisco.com>. Signed-off-by:
Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by:
Roland Dreier <rolandd@cisco.com>
-
Michael S. Tsirkin authored
The connected mode code added the possibility that an neigh struct gets freed in the list_for_each_entry() loop in path_rec_completion(), which causes a use-after-free. Fix this by changing to the _safe variant of the list walking macro. This was spotted by the Coverity checker (CID 1567). Signed-off-by:
-
Joachim Fenkes authored
eHCA scaling code must not depend on register_cpu_notifier() if CONFIG_HOTPLUG_CPU is not set, so put all related code into #ifdefs. Signed-off-by:
Joachim Fenkes <fenkes@de.ibm.com> Signed-off-by:
-
Steve Wise authored
Signed-off-by:
Steve Wise <swise@opengridcomputing.com> Signed-off-by:
-
Bryan O'Sullivan authored
This fixes kernel.org bug 8003. Signed-off-by:
Bryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by:
-
Sean Hefty authored
There's a race between ipoib_mcast_leave() and ipoib_mcast_join_finish() where we can try to detach from a multicast group before we've attached to it. Fix this by reordering the code in ipoib_mcast_leave to free the multicast group first, which waits for the multicast callback thread (which calls ipoib_mcast_join_finish()) to complete before detaching from the group. Signed-off-by:
Sean Hefty <sean.hefty@intel.com> Signed-off-by:
-
Michael S. Tsirkin authored
The sense of the time_after_eq() test in ipoib_cm_stale_task() is reversed so that only non-stale connections are reaped. Fix this by changing to time_before_eq(). Noticed by Pradeep Satyanarayana <pradeep@us.ibm.com>. Signed-off-by:
-
Patrick McHardy authored
Currently NAT not only reroutes packets in the OUTPUT chain when the routing key changed, but also if only the non-routing part of the IPsec policy key changed. This breaks ping -I since it doesn't use SO_BINDTODEVICE but IP_PKTINFO cmsg to specify the output device, and this information is lost. Only do full rerouting if the routing key changed, and just do a new policy lookup with the old route if only the ports changed. Signed-off-by:
Patrick McHardy <kaber@trash.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Patrick McHardy authored
NF_CT_NETLINK=y, NF_NAT=m results in: LD .tmp_vmlinux1 net/built-in.o: dans la fonction « nfnetlink_parse_nat_proto »: nf_conntrack_netlink.c:(.text+0x28db9): référence indéfinie vers « nf_nat_proto_find_get » nf_conntrack_netlink.c:(.text+0x28dd6): référence indéfinie vers « nf_nat_proto_put » net/built-in.o: dans la fonction « ctnetlink_new_conntrack »: nf_conntrack_netlink.c:(.text+0x29959): référence indéfinie vers « nf_nat_setup_info » nf_conntrack_netlink.c:(.text+0x29b35): référence indéfinie vers « nf_nat_setup_info » nf_conntrack_netlink.c:(.text+0x29cf7): référence indéfinie vers « nf_nat_setup_info » nf_conntrack_netlink.c:(.text+0x29de2): référence indéfinie vers « nf_nat_setup_info » make: *** [.tmp_vmlinux1] Erreur 1 Reported by Kevin Baradon <kevin.baradon@gmail.com> Signed-off-by:
-
Dave Jones authored
Turning up the warnings on gcc makes it emit warnings about the placement of 'inline' in function declarations. Here's everything that was under net/ Signed-off-by:
Dave Jones <davej@redhat.com> Signed-off-by:
-
Vlad Yasevich authored
Reset ssthresh to the correct value (peer's a_rwnd) when restarting association. Signed-off-by:
Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by:
-
Patrick McHardy authored
br_fdb_get use atomic_inc to increase the refcount of an element found on a RCU protected list, which can lead to the following race: CPU0 CPU1 br_fdb_get: rcu_read_lock __br_fdb_get: find element fdb_delete: hlist_del_rcu br_fdb_put br_fdb_put: atomic_dec_and_test call_rcu(fdb_rcu_free) br_fdb_get: atomic_inc rcu_read_unlock fdb_rcu_free: kmem_cache_free Use atomic_inc_not_zero instead. Signed-off-by:
-
Patrick McHardy authored
fib_rules_dump needs to use list_for_each_entry_rcu to protect against concurrent changes to the rules list. Signed-off-by:
-
Cyrill V. Gorcunov authored
Check if workqueue creation failed. Further usage of NULL pointed workqueue is not good I guess ;) Signed-off-by:
Cyrill V. Gorcunov <gorcunov@gmail.com> Signed-off-by:
Jean Delvare <khali@linux-fr.org>
-
