- 20 Sep, 2017 27 commits
-
-
Eric Sandeen authored
commit 6f4a1eef upstream. When we do log recovery on a readonly mount, unlinked inode processing does not happen due to the readonly checks in xfs_inactive(), which are trying to prevent any I/O on a readonly mount. This is misguided - we do I/O on readonly mounts all the time, for consistency; for example, log recovery. So do the same RDONLY flag twiddling around xfs_log_mount_finish() as we do around xfs_log_mount(), for the same reason. This all cries out for a big rework but for now this is a simple fix to an obvious problem. Signed-off-by:
Eric Sandeen <sandeen@redhat.com> Reviewed-by:
Brian Foster <bfoster@redhat.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eric Sandeen authored
commit 757a69ef upstream. There are dueling comments in the xfs code about intent for log writes when unmounting a readonly filesystem. In xfs_mountfs, we see the intent: /* * Now the log is fully replayed, we can transition to full read-only * mode for read-only mounts. This will sync all the metadata and clean * the log so that the recovery we just performed does not have to be * replayed again on the next mount. */ and it calls xfs_quiesce_attr(), but by the time we get to xfs_log_unmount_write(), it returns early for a RDONLY mount: * Don't write out unmount record on read-only mounts. Because of this, sequential ro mounts of a filesystem with a dirty log will replay the log each time, which seems odd. Fix this by writing an unmount record even for RO mounts, as long as norecovery wasn't specified (don't write a clean log record if a dirty log may still be there!) and the log device is writable. Signed-off-by:
-
Dan Williams authored
commit 58738c49 upstream. Dan reports: The patch 62232e45: "libnvdimm: control (ioctl) messages for nvdimm_bus and nvdimm devices" from Jun 8, 2015, leads to the following static checker warning: drivers/nvdimm/bus.c:1018 __nd_ioctl() warn: integer overflows 'buf_len' From a casual review, this seems like it might be a real bug. On the first iteration we load some data into in_env[]. On the second iteration we read a use controlled "in_size" from nd_cmd_in_size(). It can go up to UINT_MAX - 1. A high number means we will fill the whole in_env[] buffer. But we potentially keep looping and adding more to in_len so now it can be any value. It simple enough to change, but it feels weird that we keep looping even though in_env is totally full. Shouldn't we just return an error if we don't have space for desc->in_num. We keep looping because the size of the total input is allowed to be bigger than the 'envelope' which is a subset of the payload that tells us how much data to expect. For safety explicitly check that buf_len does not overflow which is what the checker flagged. Fixes: 62232e45: "libnvdimm: control (ioctl) messages for nvdimm_bus..." Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Christophe Jaillet authored
commit ed36b4db upstream. Check memory allocation failures and return -ENOMEM in such cases, as already done few lines below for another memory allocation. This avoids NULL pointers dereference. Fixes: 14e49454 ("libnvdimm, btt: BTT updates for UEFI 2.7 format") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by:
Vishal Verma <vishal.l.verma@intel.com> Signed-off-by:
-
Eric Biggers authored
commit a47f68d6 upstream. IDR only supports non-negative IDs. There used to be a 'WARN_ON_ONCE(id < 0)' in idr_replace(), but it was intentionally removed by commit 2e1c9b28 ("idr: remove WARN_ON_ONCE() on negative IDs"). Then it was added back by commit 0a835c4f ("Reimplement IDR and IDA using the radix tree"). However it seems that adding it back was a mistake, given that some users such as drm_gem_handle_delete() (DRM_IOCTL_GEM_CLOSE) pass in a value from userspace to idr_replace(), allowing the WARN_ON_ONCE to be triggered. drm_gem_handle_delete() actually just wants idr_replace() to return an error code if the ID is not allocated, including in the case where the ID is invalid (negative). So once again remove the bogus WARN_ON_ONCE(). This bug was found by syzkaller, which encountered the following warning: WARNING: CPU: 3 PID: 3008 at lib/idr.c:157 idr_replace+0x1d8/0x240 lib/idr.c:157 Kernel panic - not syncing: panic_on_warn set ... CPU: 3 PID: 3008 Comm: syzkaller218828 Not tainted 4.13.0-rc4-next-20170811 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: fixup_bug+0x40/0x90 arch/x86/kernel/traps.c:190 do_trap_no_signal arch/x86/kernel/traps.c:224 [inline] do_trap+0x260/0x390 arch/x86/kernel/traps.c:273 do_error_trap+0x120/0x390 arch/x86/kernel/traps.c:310 do_invalid_op+0x1b/0x20 arch/x86/kernel/traps.c:323 invalid_op+0x1e/0x30 arch/x86/entry/entry_64.S:930 RIP: 0010:idr_replace+0x1d8/0x240 lib/idr.c:157 RSP: 0018:ffff8800394bf9f8 EFLAGS: 00010297 RAX: ffff88003c6c60c0 RBX: 1ffff10007297f43 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8800394bfa78 RBP: ffff8800394bfae0 R08: ffffffff82856487 R09: 0000000000000000 R10: ffff8800394bf9a8 R11: ffff88006c8bae28 R12: ffffffffffffffff R13: ffff8800394bfab8 R14: dffffc0000000000 R15: ffff8800394bfbc8 drm_gem_handle_delete+0x33/0xa0 drivers/gpu/drm/drm_gem.c:297 drm_gem_close_ioctl+0xa1/0xe0 drivers/gpu/drm/drm_gem.c:671 drm_ioctl_kernel+0x1e7/0x2e0 drivers/gpu/drm/drm_ioctl.c:729 drm_ioctl+0x72e/0xa50 drivers/gpu/drm/drm_ioctl.c:825 vfs_ioctl fs/ioctl.c:45 [inline] do_vfs_ioctl+0x1b1/0x1520 fs/ioctl.c:685 SYSC_ioctl fs/ioctl.c:700 [inline] SyS_ioctl+0x8f/0xc0 fs/ioctl.c:691 entry_SYSCALL_64_fastpath+0x1f/0xbe Here is a C reproducer: #include <fcntl.h> #include <stddef.h> #include <stdint.h> #include <sys/ioctl.h> #include <drm/drm.h> int main(void) { int cardfd = open("/dev/dri/card0", O_RDONLY); ioctl(cardfd, DRM_IOCTL_GEM_CLOSE, &(struct drm_gem_close) { .handle = -1 } ); } Link: http://lkml.kernel.org/r/20170906235306.20534-1-ebiggers3@gmail.com Fixes: 0a835c4f ("Reimplement IDR and IDA using the radix tree") Signed-off-by:
Eric Biggers <ebiggers@google.com> Acked-by:
Tejun Heo <tj@kernel.org> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Miklos Szeredi authored
commit 5d6d3a30 upstream. Commit 0b6e9ea0 ("fuse: Add support for pid namespaces") broke Sandstorm.io development tools, which have been sending FUSE file descriptors across PID namespace boundaries since early 2014. The above patch added a check that prevented I/O on the fuse device file descriptor if the pid namespace of the reader/writer was different from the pid namespace of the mounter. With this change passing the device file descriptor to a different pid namespace simply doesn't work. The check was added because pids are transferred to/from the fuse userspace server in the namespace registered at mount time. To fix this regression, remove the checks and do the following: 1) the pid in the request header (the pid of the task that initiated the filesystem operation) is translated to the reader's pid namespace. If a mapping doesn't exist for this pid, then a zero pid is used. Note: even if a mapping would exist between the initiator task's pid namespace and the reader's pid namespace the pid will be zero if either mapping from initator's to mounter's namespace or mapping from mounter's to reader's namespace doesn't exist. 2) The lk.pid value in setlk/setlkw requests and getlk reply is left alone. Userspace should not interpret this value anyway. Also allow the setlk/setlkw operations if the pid of the task cannot be represented in the mounter's namespace (pid being zero in that case). Reported-by:
Kenton Varda <kenton@sandstorm.io> Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Fixes: 0b6e9ea0 ("fuse: Add support for pid namespaces") Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Seth Forshee <seth.forshee@canonical.com> Signed-off-by:
-
Amir Goldstein authored
commit 939ae4ef upstream. Commit b9ac5c27 ("ovl: hash overlay non-dir inodes by copy up origin") verifies that the origin lower inode stored in the overlayfs inode matched the inode of a copy up origin dentry found by lookup. There is a false positive result in that check when lower fs does not support file handles and copy up origin cannot be followed by file handle at lookup time. The false negative happens when finding an overlay inode in cache on a copied up overlay dentry lookup. The overlay inode still 'remembers' the copy up origin inode, but the copy up origin dentry is not available for verification. Relax the check in case copy up origin dentry is not available. Fixes: b9ac5c27 ("ovl: hash overlay non-dir inodes by copy up...") Reported-by:
Jordi Pujol <jordipujolp@gmail.com> Signed-off-by:
Amir Goldstein <amir73il@gmail.com> Signed-off-by:
-
Tony Luck authored
commit ce0fa3e5 upstream. Speculative processor accesses may reference any memory that has a valid page table entry. While a speculative access won't generate a machine check, it will log the error in a machine check bank. That could cause escalation of a subsequent error since the overflow bit will be then set in the machine check bank status register. Code has to be double-plus-tricky to avoid mentioning the 1:1 virtual address of the page we want to map out otherwise we may trigger the very problem we are trying to avoid. We use a non-canonical address that passes through the usual Linux table walking code to get to the same "pte". Thanks to Dave Hansen for reviewing several iterations of this. Also see: http://marc.info/?l=linux-mm&m=149860136413338&w=2Signed-off-by:
Tony Luck <tony.luck@intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bp@suse.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Elliott, Robert (Persistent Memory) <elliott@hpe.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/20170816171803.28342-1-tony.luck@intel.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Andy Lutomirski authored
commit e137a4d8 upstream. Switching FS and GS is a mess, and the current code is still subtly wrong: it assumes that "Loading a nonzero value into FS sets the index and base", which is false on AMD CPUs if the value being loaded is 1, 2, or 3. (The current code came from commit 3e2b68d7 ("x86/asm, sched/x86: Rewrite the FS and GS context switch code"), which made it better but didn't fully fix it.) Rewrite it to be much simpler and more obviously correct. This should fix it fully on AMD CPUs and shouldn't adversely affect performance. Signed-off-by:
Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bpetkov@suse.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Chang Seok <chang.seok.bae@intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Andy Lutomirski authored
commit 9584d98b upstream. In ELF_COPY_CORE_REGS, we're copying from the current task, so accessing thread.fsbase and thread.gsbase makes no sense. Just read the values from the CPU registers. In practice, the old code would have been correct most of the time simply because thread.fsbase and thread.gsbase usually matched the CPU registers. Signed-off-by:
-
Andy Lutomirski authored
commit 767d035d upstream. execve used to leak FSBASE and GSBASE on AMD CPUs. Fix it. The security impact of this bug is small but not quite zero -- it could weaken ASLR when a privileged task execs a less privileged program, but only if program changed bitness across the exec, or the child binary was highly unusual or actively malicious. A child program that was compromised after the exec would not have access to the leaked base. Signed-off-by:
-
Bernat, Yehezkel authored
commit e545f0d8 upstream. If secure authentication of a devices fails, either because the device already has another key uploaded, or there is some other error sending challenge to the device, and the user only wants to approve the device just once (without a new key being uploaded to the device) the current implementation does not allow this because the key cannot be cleared once set even if we allow it to be changed. Make this scenario possible and allow clearing the key by writing empty string to the key sysfs file. Signed-off-by:
Yehezkel Bernat <yehezkel.bernat@intel.com> Acked-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
-
Bernat, Yehezkel authored
commit 0956e411 upstream. Non-root user may read the key back after root wrote it there. This removes read access to everyone but root. Signed-off-by:
-
Bernat, Yehezkel authored
commit 8fdd6ab3 upstream. The key size is tested by hex2bin() already (as '\0' isn't an hex digit) Suggested-by:
Andy Shevchenko <andriy.shevchenko@intel.com> Signed-off-by:
-
Jaegeuk Kim authored
commit 125c9fb1 upstream. We need to check HOT_DATA to truncate any previous data block when doing roll-forward recovery. Reviewed-by:
Chao Yu <yuchao0@huawei.com> Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by:
-
Jaegeuk Kim authored
commit afd2b4da upstream. If we set CP_ERROR_FLAG in roll-forward error, f2fs is no longer to proceed any IOs due to f2fs_cp_error(). But, for example, if some stale data is involved on roll-forward process, we're able to get -ENOENT, getting fs stuck. If we get any error, let fill_super set SBI_NEED_FSCK and try to recover back to stable point. Reviewed-by:
-
Haishuang Yan authored
[ Upstream commit 0f693f19 ] ttl and tos variables are declared and assigned, but are not used in iptunnel_xmit() function. Fixes: cfc7381b ("ip_tunnel: add collect_md mode to IPIP tunnel") Cc: Alexei Starovoitov <ast@fb.com> Signed-off-by:
Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 1f3b359f ] While the cited commit fixed a possible deadlock, it added a leak of the request socket, since reqsk_put() must be called if the BPF filter decided the ACK packet must be dropped. Fixes: d624d276 ("tcp: fix possible deadlock in TCP stack vs BPF filter") Signed-off-by:
Eric Dumazet <edumazet@google.com> Acked-by:
-
Marcelo Ricardo Leitner authored
[ Upstream commit 7906b00f ] Commit fb586f25 ("sctp: delay calls to sk_data_ready() as much as possible") minimized the number of wake ups that are triggered in case the association receives a packet with multiple data chunks on it and/or when io_events are enabled and then commit 0970f5b3 ("sctp: signal sk_data_ready earlier on data chunks reception") moved the wake up to as soon as possible. It thus relies on the state machine running later to clean the flag that the event was already generated. The issue is that there are 2 call paths that calls sctp_ulpq_tail_event() outside of the state machine, causing the flag to linger and possibly omitting a needed wake up in the sequence. One of the call paths is when enabling SCTP_SENDER_DRY_EVENTS via setsockopt(SCTP_EVENTS), as noticed by Harald Welte. The other is when partial reliability triggers removal of chunks from the send queue when the application calls sendmsg(). This commit fixes it by not setting the flag in case the socket is not owned by the user, as it won't be cleaned later. This works for user-initiated calls and also for rx path processing. Fixes: fb586f25 ("sctp: delay calls to sk_data_ready() as much as possible") Reported-by:
Harald Welte <laforge@gnumonks.org> Signed-off-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 32a805ba ] IPv6 FIB should use FIB6_TABLE_HASHSZ, not FIB_TABLE_HASHSZ. Fixes: ba1cc08d ("ipv6: fix memory leak with multiple tables during netns destruction") Signed-off-by:
-
Sabrina Dubroca authored
[ Upstream commit ba1cc08d ] fib6_net_exit only frees the main and local tables. If another table was created with fib6_alloc_table, we leak it when the netns is destroyed. Fix this in the same way ip_fib_net_exit cleans up tables, by walking through the whole hashtable of fib6_table's. We can get rid of the special cases for local and main, since they're also part of the hashtable. Reproducer: ip netns add x ip -net x -6 rule add from 6003:1::/64 table 100 ip netns del x Reported-by:
Jianlin Shi <jishi@redhat.com> Fixes: 58f09b78 ("[NETNS][IPV6] ip6_fib - make it per network namespace") Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Signed-off-by:
-
Paolo Abeni authored
[ Upstream commit ca2c1418 ] After commit 0ddf3fb2 ("udp: preserve skb->dst if required for IP options processing") we clear the skb head state as soon as the skb carrying them is first processed. Since the same skb can be processed several times when MSG_PEEK is used, we can end up lacking the required head states, and eventually oopsing. Fix this clearing the skb head state only when processing the last skb reference. Reported-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
Xin Long authored
[ Upstream commit 5c25f30c ] Now when probessing ICMPV6_PKT_TOOBIG, ip6gre_err only subtracts the offset of gre header from mtu info. The expected mtu of gre device should also subtract gre header. Otherwise, the next packets still can't be sent out. Jianlin found this issue when using the topo: client(ip6gre)<---->(nic1)route(nic2)<----->(ip6gre)server and reducing nic2's mtu, then both tcp and sctp's performance with big size data became 0. This patch is to fix it by also subtracting grehdr (tun->tun_hlen) from mtu info when updating gre device's mtu in ip6gre_err(). It also needs to subtract ETH_HLEN if gre dev'type is ARPHRD_ETHER. Reported-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Jason Wang authored
[ Upstream commit 8b949bef ] We check tx avail through vhost_enable_notify() in the past which is wrong since it only checks whether or not guest has filled more available buffer since last avail idx synchronization which was just done by vhost_vq_avail_empty() before. What we really want is checking pending buffers in the avail ring. Fix this by calling vhost_vq_avail_empty() instead. This issue could be noticed by doing netperf TCP_RR benchmark as client from guest (but not host). With this fix, TCP_RR from guest to localhost restores from 1375.91 trans per sec to 55235.28 trans per sec on my laptop (Intel(R) Core(TM) i7-5600U CPU @ 2.60GHz). Fixes: 03088137 ("vhost_net: basic polling support") Signed-off-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
-
Claudiu Manoil authored
[ Upstream commit 5d621672 ] The wrong register is checked for the Tx flow control bit, it should have been maccfg1 not maccfg2. This went unnoticed for so long probably because the impact is hardly visible, not to mention the tangled code from adjust_link(). First, link flow control (i.e. handling of Rx/Tx link level pause frames) is disabled by default (needs to be enabled via 'ethtool -A'). Secondly, maccfg2 always returns 0 for tx_flow_oldval (except for a few old boards), which results in Tx flow control remaining always on once activated. Fixes: 45b679c9 ("gianfar: Implement PAUSE frame generation support") Signed-off-by:
Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by:
-
Jesper Dangaard Brouer authored
[ Upstream commit 5a63643e ] This reverts commit 1d6119ba. After reverting commit 6d7b857d ("net: use lib/percpu_counter API for fragmentation mem accounting") then here is no need for this fix-up patch. As percpu_counter is no longer used, it cannot memory leak it any-longer. Fixes: 6d7b857d ("net: use lib/percpu_counter API for fragmentation mem accounting") Fixes: 1d6119ba ("net: fix percpu memory leaks") Signed-off-by:
Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by:
-
Jesper Dangaard Brouer authored
[ Upstream commit fb452a1a ] This reverts commit 6d7b857d. There is a bug in fragmentation codes use of the percpu_counter API, that can cause issues on systems with many CPUs. The frag_mem_limit() just reads the global counter (fbc->count), without considering other CPUs can have upto batch size (130K) that haven't been subtracted yet. Due to the 3MBytes lower thresh limit, this become dangerous at >=24 CPUs (3*1024*1024/130000=24). The correct API usage would be to use __percpu_counter_compare() which does the right thing, and takes into account the number of (online) CPUs and batch size, to account for this and call __percpu_counter_sum() when needed. We choose to revert the use of the lib/percpu_counter API for frag memory accounting for several reasons: 1) On systems with CPUs > 24, the heavier fully locked __percpu_counter_sum() is always invoked, which will be more expensive than the atomic_t that is reverted to. Given systems with more than 24 CPUs are becoming common this doesn't seem like a good option. To mitigate this, the batch size could be decreased and thresh be increased. 2) The add_frag_mem_limit+sub_frag_mem_limit pairs happen on the RX CPU, before SKBs are pushed into sockets on remote CPUs. Given NICs can only hash on L2 part of the IP-header, the NIC-RXq's will likely be limited. Thus, a fair chance that atomic add+dec happen on the same CPU. Revert note that commit 1d6119ba ("net: fix percpu memory leaks") removed init_frag_mem_limit() and instead use inet_frags_init_net(). After this revert, inet_frags_uninit_net() becomes empty. Fixes: 6d7b857d ("net: use lib/percpu_counter API for fragmentation mem accounting") Fixes: 1d6119ba ("net: fix percpu memory leaks") Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
- 13 Sep, 2017 13 commits
-
-
Greg Kroah-Hartman authored
-
Richard Wareing authored
commit b31ff3cd upstream. If using a kernel with CONFIG_XFS_RT=y and we set the RHINHERIT flag on a directory in a filesystem that does not have a realtime device and create a new file in that directory, it gets marked as a real time file. When data is written and a fsync is issued, the filesystem attempts to flush a non-existent rt device during the fsync process. This results in a crash dereferencing a null buftarg pointer in xfs_blkdev_issue_flush(): BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 IP: xfs_blkdev_issue_flush+0xd/0x20 ..... Call Trace: xfs_file_fsync+0x188/0x1c0 vfs_fsync_range+0x3b/0xa0 do_fsync+0x3d/0x70 SyS_fsync+0x10/0x20 do_syscall_64+0x4d/0xb0 entry_SYSCALL64_slow_path+0x25/0x25 Setting RT inode flags does not require special privileges so any unprivileged user can cause this oops to occur. To reproduce, confirm kernel is compiled with CONFIG_XFS_RT=y and run: # mkfs.xfs -f /dev/pmem0 # mount /dev/pmem0 /mnt/test # mkdir /mnt/test/foo # xfs_io -c 'chattr +t' /mnt/test/foo # xfs_io -f -c 'pwrite 0 5m' -c fsync /mnt/test/foo/bar Or just run xfstests with MKFS_OPTIONS="-d rtinherit=1" and wait. Kernels built with CONFIG_XFS_RT=n are not exposed to this bug. Fixes: f538d4da ("[XFS] write barrier support") Signed-off-by:
Richard Wareing <rwareing@fb.com> Signed-off-by:
Dave Chinner <david@fromorbit.com> Signed-off-by:
-
Trond Myklebust authored
commit 14abcb0b upstream. There are a number of callers of nfs_pageio_complete() that want to continue using the nfs_pageio_descriptor without needing to call nfs_pageio_init() again. Examples include nfs_pageio_resend() and nfs_pageio_cond_complete(). The problem is that nfs_pageio_complete() also calls nfs_pageio_cleanup_mirroring(), which frees up the array of mirrors. This can lead to writeback errors, in the next call to nfs_pageio_setup_mirroring(). Fix by simply moving the allocation of the mirrors to nfs_pageio_setup_mirroring(). Link: https://bugzilla.kernel.org/show_bug.cgi?id=196709Reported-by:
JianhongYin <yin-jianhong@163.com> Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
-
tarangg@amazon.com authored
commit e973b1a5 upstream. Since commit 18290650 ("NFS: Move buffered I/O locking into nfs_file_write()") nfs_file_write() has not flushed the correct byte range during synchronous writes. generic_write_sync() expects that iocb->ki_pos points to the right edge of the range rather than the left edge. To replicate the problem, open a file with O_DSYNC, have the client write at increasing offsets, and then print the successful offsets. Block port 2049 partway through that sequence, and observe that the client application indicates successful writes in advance of what the server received. Fixes: 18290650 ("NFS: Move buffered I/O locking into nfs_file_write()") Signed-off-by:
Jacob Strauss <jsstraus@amazon.com> Signed-off-by:
Tarang Gupta <tarangg@amazon.com> Tested-by:
-
Trond Myklebust authored
commit 196639eb upstream. The writeback code wants to send a commit after processing the pages, which is why we want to delay releasing the struct path until after that's done. Also, the layout code expects that we do not free the inode before we've put the layout segments in pnfs_writehdr_free() and pnfs_readhdr_free() Fixes: 919e3bd9 ("NFS: Ensure we commit after writeback is complete") Fixes: 4714fb51 ("nfs: remove pgio_header refcount, related cleanup") Signed-off-by:
-
Mark Rutland authored
commit 746a272e upstream. When there's a fatal signal pending, arm's do_page_fault() implementation returns 0. The intent is that we'll return to the faulting userspace instruction, delivering the signal on the way. However, if we take a fatal signal during fixing up a uaccess, this results in a return to the faulting kernel instruction, which will be instantly retried, resulting in the same fault being taken forever. As the task never reaches userspace, the signal is not delivered, and the task is left unkillable. While the task is stuck in this state, it can inhibit the forward progress of the system. To avoid this, we must ensure that when a fatal signal is pending, we apply any necessary fixup for a faulting kernel instruction. Thus we will return to an error path, and it is up to that code to make forward progress towards delivering the fatal signal. Signed-off-by:
Mark Rutland <mark.rutland@arm.com> Reviewed-by:
Steve Capper <steve.capper@arm.com> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Marc Zyngier authored
commit 95696d29 upstream. The GIC-500 integrated in the Armada-37xx SoCs is compliant with the GICv3 architecture, and thus provides a maintenance interrupt that is required for hypervisors to function correctly. With the interrupt provided in the DT, KVM now works as it should. Tested on an Espressobin system. Fixes: adbc3695 ("arm64: dts: add the Marvell Armada 3700 family and a development board") Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by:
-
Ben Seri authored
commit e860d2c9 upstream. Validate the output buffer length for L2CAP config requests and responses to avoid overflowing the stack buffer used for building the option blocks. Signed-off-by:
Ben Seri <ben@armis.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Stanislaw Gruszka authored
commit 83ec4891 upstream. Since commit 41977e86 ("rt2x00: add support for MT7620") we do not initialize TX_PIN_CFG setting. This cause breakage at least on some RT3573 devices. To fix the problem patch restores previous behaviour for non MT7620 chips. Fixes: 41977e86 ("rt2x00: add support for MT7620") Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1480829Reported-and-tested-by:
Jussi Eloranta <jussi.eloranta@csun.edu> Cc: Daniel Golle <daniel@makrotopia.org> Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> Acked-by:
Daniel Golle <daniel@makrotopia.org> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Linus Torvalds authored
commit f007cad1 upstream. This reverts commit 81f95076. It causes random failures of firmware loading at resume time (well, random for me, it seems to be more reliable for others) because the firmware disabling is not actually synchronous with any particular resume event, and at least the btusb driver that uses a workqueue to load the firmware at resume seems to occasionally hit the "firmware loading is disabled" logic because the firmware loader hasn't gotten the resume event yet. Some kind of sanity check for not trying to load firmware when it's not possible might be a good thing, but this commit was not it. Greg seems to have silently suffered the same issue, and pointed to the likely culprit, and Gabriel C verified the revert fixed it for him too. Reported-by:
Gabriel C <nix.or.die@gmail.com> Cc: Luis R. Rodriguez <mcgrof@kernel.org> Signed-off-by:
-
Brijesh Singh authored
commit 64531a3b upstream. Commit 14727754 ("kvm: svm: Add support for additional SVM NPF error codes", 2016-11-23) added a new error code to aid nested page fault handling. The commit unprotects (kvm_mmu_unprotect_page) the page when we get a NPF due to guest page table walk where the page was marked RO. However, if an L0->L2 shadow nested page table can also be marked read-only when a page is read only in L1's nested page table. If such a page is accessed by L2 while walking page tables it can cause a nested page fault (page table walks are write accesses). However, after kvm_mmu_unprotect_page we may get another page fault, and again in an endless stream. To cover this use case, we qualify the new error_code check with vcpu->arch.mmu_direct_map so that the error_code check would run on L1 guest, and not the L2 guest. This avoids hitting the above scenario. Fixes: 14727754 Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Thomas Lendacky <thomas.lendacky@amd.com> Signed-off-by:
Brijesh Singh <brijesh.singh@amd.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Laurent Dufour authored
commit de0c799b upstream. Seen while reading the code, in handle_mm_fault(), in the case arch_vma_access_permitted() is failing the call to mem_cgroup_oom_disable() is not made. To fix that, move the call to mem_cgroup_oom_enable() after calling arch_vma_access_permitted() as it should not have entered the memcg OOM. Link: http://lkml.kernel.org/r/1504625439-31313-1-git-send-email-ldufour@linux.vnet.ibm.com Fixes: bae473a4 ("mm: introduce fault_env") Signed-off-by:
Laurent Dufour <ldufour@linux.vnet.ibm.com> Acked-by:
Kirill A. Shutemov <kirill@shutemov.name> Acked-by:
Michal Hocko <mhocko@suse.com> Signed-off-by:
-
Michal Hocko authored
commit b4ccec41 upstream. online_mem_sections() accidentally marks online only the first section in the given range. This is a typo which hasn't been noticed because I haven't tested large 2GB blocks previously. All users of pfn_to_online_page would get confused on the the rest of the pfn range in the block. All we need to fix this is to use iterator (pfn) rather than start_pfn. Link: http://lkml.kernel.org/r/20170904112210.3401-1-mhocko@kernel.org Fixes: 2d070eab ("mm: consider zone which is not fully populated to have holes") Signed-off-by:
Vlastimil Babka <vbabka@suse.cz> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Signed-off-by:
-
