- 22 Sep, 2020 20 commits
-
-
Oded Gabbay authored
ArmCP mandates that the device CPU is always an ARM processor, which might be wrong in the future. Most of this change is an internal renaming of variables, functions and defines but there are two entries in sysfs which have armcp in their names. Add identical cpucp entries but don't remove yet the armcp entries. Those will be deprecated next year. Add the documentation about it in sysfs documentation. Signed-off-by:
Moti Haimovski <mhaimovski@habana.ai> Reviewed-by:
Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by:
-
Oded Gabbay authored
Add define for the 2 MME slave engines. Reviewed-by:
Tomer Tayar <ttayar@habana.ai> Signed-off-by:
-
farah kassabri authored
Add driver implementation for reading the total energy consumption from the device ARM FW. Signed-off-by:
farah kassabri <fkassabri@habana.ai> Reviewed-by:
-
Tomer Tayar authored
Include linux/bitfield.h only in habanalabs.h, instead of in each and every file that needs it, as habanalabs.h is already included by all. Signed-off-by:
-
farah kassabri authored
change busy engines bitmask to 64 bits in order to represent more engines, needed for future ASIC support. Signed-off-by:
-
Oded Gabbay authored
Eliminate following warning: warning: Shifting signed 32-bit value by 31 bits is undefined behavior Reported-by:
kernel test robot <lkp@intel.com> Reviewed-by:
-
Oded Gabbay authored
The driver waits for the TPC vector pipe to be empty before checking if the TPC kernel has finished executing, but the code doesn't validate that the pipe was indeed empty, it just wait for it without checking the return value. Reported-by:
-
Oded Gabbay authored
new_dma_pkt->ctl is assigned a value and then is reassigned a new value without the first value ever being used. Reported-by:
-
Oded Gabbay authored
Use the standard FIELD_PREP() macro instead of << operator to perform bitmask operations. This ensures type check safety and eliminate compiler warnings. Reported-by:
-
Oded Gabbay authored
Use the standard macros to define bitmasks. Reported-by:
-
Oded Gabbay authored
If both parts of if-else are goto statements, we can remove the else and put the else goto statement after the if statement. Reported-by:
-
Oded Gabbay authored
%u is used for unsigned so we need to cast the int variable to u32 to avoid compiler warning. Reported-by:
-
Oded Gabbay authored
Although the possible values for CB's ID are only 32 bits, there are a few places in the code where this field is shifted and passed into a function which expects 64 bits. Reported-by:
-
Dotan Barak authored
If there is a failure during the testing of a queue, to ease up debugging - print the queue id. Signed-off-by:
Dotan Barak <dbarak@habana.ai> Reviewed-by:
-
farah kassabri authored
Allow user application to write to this register in order to be able to configure the quiet period of the QMAN between grants. Signed-off-by:
-
Ofir Bitton authored
driver will now get notified upon any PCI error occurred and will respond according to the severity of the error. Signed-off-by:
Ofir Bitton <obitton@habana.ai> Reviewed-by:
-
Ofir Bitton authored
Although the driver defines the first user-available sync manager object and monitor in habanalabs.h, we would like to also expose this information via the INFO IOCTL so the runtime can get this information dynamically. This is because in future ASICs we won't need to define it statically. Signed-off-by:
-
Ofir Bitton authored
Update firmware header with new API for getting pcie info such as tx/rx throughput and replay counter. These counters are needed by customers for monitor and maintenance of multiple devices. Add new opcodes to the INFO ioctl to retrieve these counters. Signed-off-by:
-
Ofir Bitton authored
habanalabs driver uses dma-fence mechanism for synchronization. dma-fence mechanism was designed solely for GPUs, hence we purpose a simpler mechanism based on completions to replace current dma-fence objects. Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Oded Gabbay authored
Future ASIC names are longer than 15 chars so increase the variable length to 32 chars. Signed-off-by:
-
- 17 Sep, 2020 20 commits
-
-
Lang Dai authored
uio_register_device() do two things. 1) get an uio id from a global pool, e.g. the id is <A> 2) create file nodes like /sys/class/uio/uio<A> uio_unregister_device() do two things. 1) free the uio id <A> and return it to the global pool 2) free the file node /sys/class/uio/uio<A> There is a situation is that one worker is calling uio_unregister_device(), and another worker is calling uio_register_device(). If the two workers are X and Y, they go as below sequence, 1) X free the uio id <AAA> 2) Y get an uio id <AAA> 3) Y create file node /sys/class/uio/uio<AAA> 4) X free the file note /sys/class/uio/uio<AAA> Then it will failed at the 3rd step and cause the phenomenon we saw as it is creating a duplicated file node. Failure reports as follows: sysfs: cannot create duplicate filename '/class/uio/uio10' Call Trace: sysfs_do_create_link_sd.isra.2+0x9e/0xb0 sysfs_create_link+0x25/0x40 device_add+0x2c4/0x640 __uio_register_device+0x1c5/0x576 [uio] adf_uio_init_bundle_dev+0x231/0x280 [intel_qat] adf_uio_register+0x1c0/0x340 [intel_qat] adf_dev_start+0x202/0x370 [intel_qat] adf_dev_start_async+0x40/0xa0 [intel_qat] process_one_work+0x14d/0x410 worker_thread+0x4b/0x460 kthread+0x105/0x140 ? process_one_work+0x410/0x410 ? kthread_bind+0x40/0x40 ret_from_fork+0x1f/0x40 Code: 85 c0 48 89 c3 74 12 b9 00 10 00 00 48 89 c2 31 f6 4c 89 ef e8 ec c4 ff ff 4c 89 e2 48 89 de 48 c7 c7 e8 b4 ee b4 e8 6a d4 d7 ff <0f> 0b 48 89 df e8 20 fa f3 ff 5b 41 5c 41 5d 5d c3 66 0f 1f 84 ---[ end trace a7531c1ed5269e84 ]--- c6xxvf b002:00:00.0: Failed to register UIO devices c6xxvf b002:00:00.0: Failed to register UIO devices Signed-off-by:
Lang Dai <lang.dai@intel.com> Link: https://lore.kernel.org/r/1600054002-17722-1-git-send-email-lang.dai@intel.comSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Vadym Kochan authored
of_parse_phandle() returns device_node with incremented ref count which needs to be decremented by of_node_put() when device_node is not used. Fixes: e2a5402e ("nvmem: Add nvmem_device based consumer apis.") Signed-off-by:
Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200917134437.16637-5-srinivas.kandagatla@linaro.orgSigned-off-by:
-
Bartosz Golaszewski authored
We don't need to specify any ranges when allocating IDs so we can switch to ida_alloc() and ida_free() instead of the ida_simple_ counterparts. ida_simple_get(ida, 0, 0, gfp) is equivalent to ida_alloc_range(ida, 0, UINT_MAX, gfp) which is equivalent to ida_alloc(ida, gfp). Note: IDR will never actually allocate an ID larger than INT_MAX. Signed-off-by:
Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by:
-
Tian Tao authored
Use kobj_to_dev() instead of container_of() Signed-off-by:
Tian Tao <tiantao6@hisilicon.com> Signed-off-by:
-
Chih-En Hsu authored
This patch is to remove function "mtk_reg_write" since Mediatek EFUSE hardware only supports read functionality for NVMEM consumers. Fixes: ba360fd0 ("nvmem: mtk-efuse: remove nvmem regmap dependency") Acked-by:
Andrew-CT Chen <andrew-ct.chen@mediatek.com> Signed-off-by:
Chih-En Hsu <chih-en.hsu@mediatek.com> Signed-off-by:
-
Vadym Kochan authored
Set type as NVMEM_TYPE_EEPROM to expose this info via sysfs: $ cat /sys/bus/nvmem/devices/{DEVICE}/type EEPROM Signed-off-by: -
Vadym Kochan authored
Set type as NVMEM_TYPE_EEPROM to expose this info via sysfs: $ cat /sys/bus/nvmem/devices/{DEVICE}/type EEPROM Signed-off-by: -
Mike Leach authored
The initialisation code checks TRCIDR4 to determine the number of resource selectors available on the system. Since ETM v 4.3, the value 0 has a different meaning. This patch takes into account this change. Signed-off-by:
Mike Leach <mike.leach@linaro.org> [Removed '.' in patch title, added stable] Signed-off-by:
Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200916191737.4001561-17-mathieu.poirier@linaro.orgSigned-off-by:
-
Jonathan Zhou authored
The member @nr_resource represents how many resource selector pairs, and the pair 0 is always implemented and reserved. So let's multiply by 2 when resetting the selector configuration. And also update the validation of the input @idx. Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: Shaokun Zhang <zhangshaokun@hisilicon.com> Signed-off-by:
Jonathan Zhou <jonathan.zhouwen@huawei.com> [Fixed typographical error in changelog, added stable] Signed-off-by:
-
Linu Cherian authored
Coresight driver assumes sink is common across all the ETMs, and tries to build a path between ETM and the first enabled sink found using bus based search. This breaks sysFS usage on implementations that has multiple per core sinks in enabled state. To fix this, coresight_get_enabled_sink API is updated to do a connection based search starting from the given source, instead of bus based search. With sink selection using sysfs depecrated for perf interface, provision for reset is removed as well in this API. Signed-off-by:
Linu Cherian <lcherian@marvell.com> [Fixed indentation problem and removed obsolete comment] Signed-off-by:
-
Linu Cherian authored
When using the perf interface, sink selection using sysfs is deprecated. Signed-off-by:
-
Mathieu Poirier authored
Add CoreSight mailing list so that people can participate in patch reviews and know what features are coming next. Signed-off-by:
-
Jonathan Zhou authored
The TRCSEQEVR(3) is reserved, using '@nrseqstate - 1' instead to avoid accessing the reserved register. Fixes: f188b5e7 ("coresight: etm4x: Save/restore state across CPU low power states") Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: Shaokun Zhang <zhangshaokun@hisilicon.com> Signed-off-by:
-
Suzuki K Poulose authored
If the specified/hinted sink is not reachable from a subset of the CPUs, we could end up unable to trace the event on those CPUs. This is the best effort we could do until we support 1:1 configurations. Fail gracefully in such cases avoiding a WARN_ON, which can be easily triggered by the user on certain platforms (Arm N1SDP), with the following trace paths : CPU0 \ -- Funnel0 --> ETF0 --> / \ CPU1 \ MainFunnel CPU2 / \ / -- Funnel1 --> ETF1 --> / CPU1 $ perf record --per-thread -e cs_etm/@ETF0/u -- <app> could trigger the following WARNING, when the event is scheduled on CPU2. [10919.513250] ------------[ cut here ]------------ [10919.517861] WARNING: CPU: 2 PID: 24021 at drivers/hwtracing/coresight/coresight-etm-perf.c:316 etm_event_start+0xf8/0x100 ... [10919.564403] CPU: 2 PID: 24021 Comm: perf Not tainted 5.8.0+ #24 [10919.570308] pstate: 80400089 (Nzcv daIf +PAN -UAO BTYPE=--) [10919.575865] pc : etm_event_start+0xf8/0x100 [10919.580034] lr : etm_event_start+0x80/0x100 [10919.584202] sp : fffffe001932f940 [10919.587502] x29: fffffe001932f940 x28: fffffc834995f800 [10919.592799] x27: 0000000000000000 x26: fffffe0011f3ced0 [10919.598095] x25: fffffc837fce244c x24: fffffc837fce2448 [10919.603391] x23: 0000000000000002 x22: fffffc8353529c00 [10919.608688] x21: fffffc835bb31000 x20: 0000000000000000 [10919.613984] x19: fffffc837fcdcc70 x18: 0000000000000000 [10919.619281] x17: 0000000000000000 x16: 0000000000000000 [10919.624577] x15: 0000000000000000 x14: 00000000000009f8 [10919.629874] x13: 00000000000009f8 x12: 0000000000000018 [10919.635170] x11: 0000000000000000 x10: 0000000000000000 [10919.640467] x9 : fffffe00108cd168 x8 : 0000000000000000 [10919.645763] x7 : 0000000000000020 x6 : 0000000000000001 [10919.651059] x5 : 0000000000000002 x4 : 0000000000000001 [10919.656356] x3 : 0000000000000000 x2 : 0000000000000000 [10919.661652] x1 : fffffe836eb40000 x0 : 0000000000000000 [10919.666949] Call trace: [10919.669382] etm_event_start+0xf8/0x100 [10919.673203] etm_event_add+0x40/0x60 [10919.676765] event_sched_in.isra.134+0xcc/0x210 [10919.681281] merge_sched_in+0xb0/0x2a8 [10919.685017] visit_groups_merge.constprop.140+0x15c/0x4b8 [10919.690400] ctx_sched_in+0x15c/0x170 [10919.694048] perf_event_sched_in+0x6c/0xa0 [10919.698130] ctx_resched+0x60/0xa0 [10919.701517] perf_event_exec+0x288/0x2f0 [10919.705425] begin_new_exec+0x4c8/0xf58 [10919.709247] load_elf_binary+0x66c/0xf30 [10919.713155] exec_binprm+0x15c/0x450 [10919.716716] __do_execve_file+0x508/0x748 [10919.720711] __arm64_sys_execve+0x40/0x50 [10919.724707] do_el0_svc+0xf4/0x1b8 [10919.728095] el0_sync_handler+0xf8/0x124 [10919.732003] el0_sync+0x140/0x180 Even though we don't support using separate sinks for the ETMs yet (e.g, for 1:1 configurations), we should at least honor the user's choice and handle the limitations gracefully, by simply skipping the tracing on ETMs which can't reach the requested sink. Fixes: f9d81a65 ("coresight: perf: Allow tracing on hotplugged CPUs") Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Reported-by:Jeremy Linton <jeremy.linton@arm.com> Tested-by:
Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by:
-
Tingwei Zhang authored
Deadlock as below is triggered by one CPU holds drvdata->spinlock and calls cti_enable_hw(). Smp_call_function_single() is called in cti_enable_hw() and tries to let another CPU write CTI registers. That CPU is trying to get drvdata->spinlock in cti_cpu_pm_notify() and doesn't response to IPI from smp_call_function_single(). [ 988.335937] CPU: 6 PID: 10258 Comm: sh Tainted: G W L 5.8.0-rc6-mainline-16783-gc38daa79b26b-dirty #1 [ 988.346364] Hardware name: Thundercomm Dragonboard 845c (DT) [ 988.352073] pstate: 20400005 (nzCv daif +PAN -UAO BTYPE=--) [ 988.357689] pc : smp_call_function_single+0x158/0x1b8 [ 988.362782] lr : smp_call_function_single+0x124/0x1b8 ... [ 988.451638] Call trace: [ 988.454119] smp_call_function_single+0x158/0x1b8 [ 988.458866] cti_enable+0xb4/0xf8 [coresight_cti] [ 988.463618] coresight_control_assoc_ectdev+0x6c/0x128 [coresight] [ 988.469855] coresight_enable+0x1f0/0x364 [coresight] [ 988.474957] enable_source_store+0x5c/0x9c [coresight] [ 988.480140] dev_attr_store+0x14/0x28 [ 988.483839] sysfs_kf_write+0x38/0x4c [ 988.487532] kernfs_fop_write+0x1c0/0x2b0 [ 988.491585] vfs_write+0xfc/0x300 [ 988.494931] ksys_write+0x78/0xe0 [ 988.498283] __arm64_sys_write+0x18/0x20 [ 988.502240] el0_svc_common+0x98/0x160 [ 988.506024] do_el0_svc+0x78/0x80 [ 988.509377] el0_sync_handler+0xd4/0x270 [ 988.513337] el0_sync+0x164/0x180 This change write CTI registers directly in cti_enable_hw(). Config->hw_powered has been checked to be true with spinlock holded. CTI is powered and can be programmed until spinlock is released. Fixes: 6a0953ce ("coresight: cti: Add CPU idle pm notifer to CTI devices") Signed-off-by:
Tingwei Zhang <tingwei@codeaurora.org> [Re-ordered variable declaration] Signed-off-by:
-
Jonathan Zhou authored
The member @nr_addr_cmp is not a bool value, using operator '>' instead to avoid unexpected failure. Fixes: a77de263 ("coresight: etm4x: moving sysFS entries to a dedicated file") Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: Shaokun Zhang <zhangshaokun@hisilicon.com> Signed-off-by:
-
Mike Leach authored
Moving from using an address filter to trace the default "all addresses" range to no filtering to acheive the same result, has caused the perf filtering of kernel/user address spaces from not working unless an explicit address filter was used. This is due to the original code using a side-effect of the address filtering rather than setting the global TRCVICTLR exception level filtering. The use of the mode sysfs file is also similarly affected. A helper function is added to fix both instances. Fixes: ae204151 ("coresight: etmv4: Update default filter and initialisation") Reported-by:
Leo Yan <leo.yan@linaro.org> Tested-by:
-
Tingwei Zhang authored
Below BUG is triggered by call pm_runtime_get_sync() in cti_cpuhp_enable_hw(). It's in CPU hotplug callback with interrupt disabled. Pm_runtime_get_sync() calls clock driver to enable clock which could sleep. Remove pm_runtime_get_sync() in cti_cpuhp_enable_hw() since pm_runtime_get_sync() is called in cti_enabld and pm_runtime_put() is called in cti_disabled. No need to increase pm count when CPU gets online since it's not decreased when CPU is offline. [ 105.800279] BUG: scheduling while atomic: swapper/1/0/0x00000002 [ 105.800290] Modules linked in: [ 105.800327] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G W 5.9.0-rc1-gff1304be0a05-dirty #21 [ 105.800337] Hardware name: Thundercomm Dragonboard 845c (DT) [ 105.800353] Call trace: [ 105.800414] dump_backtrace+0x0/0x1d4 [ 105.800439] show_stack+0x14/0x1c [ 105.800462] dump_stack+0xc0/0x100 [ 105.800490] __schedule_bug+0x58/0x74 [ 105.800523] __schedule+0x590/0x65c [ 105.800538] schedule+0x78/0x10c [ 105.800553] schedule_timeout+0x188/0x250 [ 105.800585] qmp_send.constprop.10+0x12c/0x1b0 [ 105.800599] qmp_qdss_clk_prepare+0x18/0x20 [ 105.800622] clk_core_prepare+0x48/0xd4 [ 105.800639] clk_prepare+0x20/0x34 [ 105.800663] amba_pm_runtime_resume+0x54/0x90 [ 105.800695] __rpm_callback+0xdc/0x138 [ 105.800709] rpm_callback+0x24/0x78 [ 105.800724] rpm_resume+0x328/0x47c [ 105.800739] __pm_runtime_resume+0x50/0x74 [ 105.800768] cti_starting_cpu+0x40/0xa4 [ 105.800795] cpuhp_invoke_callback+0x84/0x1e0 [ 105.800814] notify_cpu_starting+0x9c/0xb8 [ 105.800834] secondary_start_kernel+0xd8/0x164 [ 105.800933] CPU1: Booted secondary processor 0x0000000100 [0x517f803c] Fixes: e9b88058 ("coresight: cti: Add CPU Hotplug handling to CTI driver") Reviewed-by:
-
Tingwei Zhang authored
Coresight_claim_device() is called in cti_starting_cpu() only when CTI is enabled while coresight_disclaim_device() is called uncontionally in cti_dying_cpu(). This triggered below WARNING. Only call disclaim device when CTI device is enabled to fix it. [ 75.989643] WARNING: CPU: 1 PID: 14 at kernel/drivers/hwtracing/coresight/coresight.c:209 coresight_disclaim_device_unlocked+0x10/0x24 [ 75.989697] CPU: 1 PID: 14 Comm: migration/1 Not tainted 5.9.0-rc1-gff1304be0a05-dirty #21 [ 75.989709] Hardware name: Thundercomm Dragonboard 845c (DT) [ 75.989737] pstate: 80c00085 (Nzcv daIf +PAN +UAO BTYPE=--) [ 75.989758] pc : coresight_disclaim_device_unlocked+0x10/0x24 [ 75.989775] lr : coresight_disclaim_device+0x24/0x38 [ 75.989783] sp : ffff800011cd3c90 . [ 75.990018] Call trace: [ 75.990041] coresight_disclaim_device_unlocked+0x10/0x24 [ 75.990066] cti_dying_cpu+0x34/0x4c [ 75.990101] cpuhp_invoke_callback+0x84/0x1e0 [ 75.990121] take_cpu_down+0x90/0xe0 [ 75.990154] multi_cpu_stop+0x134/0x160 [ 75.990171] cpu_stopper_thread+0xb0/0x13c [ 75.990196] smpboot_thread_fn+0x1c4/0x270 [ 75.990222] kthread+0x128/0x154 [ 75.990251] ret_from_fork+0x10/0x18 Fixes: e9b88058 ("coresight: cti: Add CPU Hotplug handling to CTI driver") Reviewed-by:
-
Qi Liu authored
Add ETMv4 periperhal ID for HiSilicon Hip08 and Hip09 platform. Hip08 contains ETMv4.2 device and Hip09 contains ETMv4.5 device. Acked-by:
Suzuki K Poulose <suzuki.oulose@arm.com> Signed-off-by:
Qi Liu <liuqi115@huawei.com> Signed-off-by:
-
