- 08 Nov, 2017 3 commits
-
-
Chris Wilson authored
The handling of contexts are peculiar. Instead of tieing their vma to activity, we pin the context. This means that we cannot simply unbind the context object itself at will (which would normally cause us to wait for the vma to be idle), but must manually idle the GPU and retire requests first. A consequence of this peculiarity is when doing a last desperate attempt to recover memory. If the memory is tied up inside active context objects, we will fail to recover any memory simply by trying to unbind the objects without first doing a wait-for-idle. A side-effect of removing the call to shrinker_lock_uninterruptible() from i915_gem_shrinker_oom() was that we removed an unlocked wait-for-idle, and so lost the "natural" shrinkage of context objects. By replacing that with a locked wait from inside i915_gem_shrink(), we not only replace it with the ability to recover all context objects, but do so for all i915_gem_shrink_all() callers. v2: Switching requires request allocation, which is not permitted from inside the shrinker as it only uses ordinary allocations. References: https://bugs.freedesktop.org/show_bug.cgi?id=102936 Fixes: f2123818 ("drm/i915: Move dev_priv->mm.[un]bound_list to its own lock") Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171108094400.1386-1-chris@chris-wilson.co.ukReviewed-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
Chris Wilson authored
Upon parking, if we discover an active engine we dump its state. Follow that state with an indication of whether the engine was idle. References: https://bugs.freedesktop.org/show_bug.cgi?id=103479Signed-off-by:
-
Chris Wilson authored
During intel_atomic_check(), we do not take the intel_runtime_pm_get() wakeref and so should do the atomic modeset precalculations without referring to the HW. However, on Ironlake we see <7>[ 23.487557] [drm:intel_atomic_check [i915]] [CONNECTOR:47:VGA-1] checking for sink bpp constrains <7>[ 23.487615] [drm:intel_atomic_check [i915]] clamping display bpp (was 36) to default limit of 24 <4>[ 23.487621] RPM wakelock ref not held during HW access <4>[ 23.487652] ------------[ cut here ]------------ <4>[ 23.487697] WARNING: CPU: 0 PID: 1343 at drivers/gpu/drm/i915/intel_drv.h:1813 gen5_read32+0x183/0x200 [i915] <4>[ 23.487701] Modules linked in: snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic i915 intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul snd_hda_intel ghash_clmulni_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm lpc_ich e1000e mei_me ptp mei pps_core prime_numbers <4>[ 23.487784] CPU: 0 PID: 1343 Comm: debugfs_test Tainted: G W 4.14.0-rc7-CI-Trybot_1378+ #1 <4>[ 23.487788] Hardware name: Hewlett-Packard HP Compaq 8100 Elite SFF PC/304Ah, BIOS 786H1 v01.13 07/14/2011 <4>[ 23.487793] task: ffff8801f90aa6c0 task.stack: ffffc900013ec000 <4>[ 23.487838] RIP: 0010:gen5_read32+0x183/0x200 [i915] <4>[ 23.487842] RSP: 0018:ffffc900013efb58 EFLAGS: 00010292 <4>[ 23.487849] RAX: 000000000000002a RBX: ffff880205c00000 RCX: 0000000000000006 <4>[ 23.487854] RDX: 000000000000140a RSI: ffffffff81d0eb14 RDI: ffffffff81cc26f6 <4>[ 23.487857] RBP: ffffc900013efb80 R08: ffff8801f90aaff8 R09: 0000000000000000 <4>[ 23.487861] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000001 <4>[ 23.487865] R13: 0000000000046000 R14: ffff88020ffaba78 R15: ffff88020b109bf8 <4>[ 23.487870] FS: 00007f53b5e40a40(0000) GS:ffff88021bc00000(0000) knlGS:0000000000000000 <4>[ 23.487874] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4>[ 23.487878] CR2: 000055e41900c0e8 CR3: 00000001fa0d6005 CR4: 00000000000206f0 <4>[ 23.487882] Call Trace: <4>[ 23.487931] intel_atomic_check+0x745/0x1290 [i915] <4>[ 23.487948] drm_atomic_check_only+0x459/0x560 <4>[ 23.487956] ? drm_atomic_set_crtc_for_connector+0xc9/0x100 <4>[ 23.488025] drm_atomic_commit+0x18/0x50 <4>[ 23.488035] restore_fbdev_mode_atomic+0x190/0x1f0 <4>[ 23.488059] restore_fbdev_mode+0x32/0x120 <4>[ 23.488072] drm_fb_helper_restore_fbdev_mode_unlocked+0x50/0xa0 <4>[ 23.488139] intel_fbdev_restore_mode+0x34/0x90 [i915] <4>[ 23.488194] i915_driver_lastclose+0xe/0x10 [i915] <4>[ 23.488208] drm_lastclose+0x39/0xf0 <4>[ 23.488219] drm_release+0x30c/0x3c0 <4>[ 23.488236] __fput+0xb9/0x200 <4>[ 23.488252] ____fput+0xe/0x10 <4>[ 23.488264] task_work_run+0x89/0xc0 <4>[ 23.488278] exit_to_usermode_loop+0x83/0x90 <4>[ 23.488290] syscall_return_slowpath+0xd0/0x110 <4>[ 23.488304] entry_SYSCALL_64_fastpath+0xaf/0xb1 <4>[ 23.488312] RIP: 0033:0x7f53b4317560 <4>[ 23.488320] RSP: 002b:00007ffca7e70748 EFLAGS: 00000246 ORIG_RAX: 0000000000000003 <4>[ 23.488333] RAX: 0000000000000000 RBX: 0000000000000001 RCX: 00007f53b4317560 <4>[ 23.488340] RDX: 0000000000000005 RSI: 00007ffca7e70640 RDI: 0000000000000004 <4>[ 23.488347] RBP: 000055e417783900 R08: 000055e418f9e290 R09: 0000000000000000 <4>[ 23.488356] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000001 <4>[ 23.488363] R13: 00007f53b4302c40 R14: 0000000000000000 R15: 0000000000000000 <4>[ 23.488384] Code: b5 f2 f2 e0 0f ff e9 c5 fe ff ff 80 3d 0e 4b 10 00 00 0f 85 c6 fe ff ff 48 c7 c7 30 73 29 a0 c6 05 fa 4a 10 00 01 e8 8e f2 f2 e0 <0f> ff e9 ac fe ff ff e8 51 9d f3 e0 85 c0 0f 85 01 ff ff ff 48 <4>[ 23.488780] ---[ end trace 6bc72ce7f1596190 ]--- <7>[ 23.488844] [drm:intel_atomic_check [i915]] checking fdi config on pipe A, lanes 1 <7>[ 23.488911] [drm:intel_atomic_check [i915]] hw max bpp: 36, pipe bpp: 24, dithering: 0 due to intel_fdi_link_freq() poking at FDI_PLL_BIOS_0. Avoid this by recording the fdi pll frequency during device initiailisation. v2: Also extract the static FDI PLL frequencies for Sandybridge and Ivybridge. Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com>
-
- 07 Nov, 2017 8 commits
-
-
Chris Wilson authored
Since the partial tiling tests are poking into the GGTT to watch the fence registers in operation, it itself needs the device rpm wakeref in order for the GGTT to remain accessible. Signed-off-by:
Matthew Auld <matthew.auld@intel.com>
-
Chris Wilson authored
The vma routines are responsible for acquiring the device rpm wakeref before they poke the HW. However, some of the selftests bypass the higher level vma routines in order to poke directly at the lowlevel GGTT functions; these are then responsible for managing rpm themselves. Signed-off-by:
-
Chris Wilson authored
If we only have 4k pages, we can't mix together different combinations of hugepages to see if the world burns. However, as the loops did nothing, we never set err to 0 and reported ENODEV aborting the test. Teach the test to skip instead. Signed-off-by:
Matthew Auld <matthew.william.auld@gmail.com>
-
Chris Wilson authored
Smatch warns of drivers/gpu/drm/i915/intel_pm.c:1161 g4x_compute_wm() warn: signedness bug returning '(-33554430)' which is a result of it believing that wm may be INT_MAX following g4x_tlb_miss_wa(). Just declaring g4x_tlb_miss_wa() as returning an unsigned integer is not sufficient, we need to tell smatch that wm itself is unsigned for it to not worry. So mark up the locals we expect to be non-negative, and so silence smatch. v2: Mark up vlv_compute_wm_level() as unsigned similarly. Signed-off-by:
-
Chris Wilson authored
Older compilers (gcc-4.9) are not as able to track uninitialised variables as well as more recent compilers. In particular, drivers/gpu/drm/i915/intel_dpio_phy.c: In function ‘bxt_ddi_phy_init’: drivers/gpu/drm/i915/intel_dpio_phy.c:482:25: warning: ‘was_enabled’ may be used uninitialized in this function [-Wmaybe-uninitialized] In this case, we can rearrange code slightly to make the control flow clearer to the reader, as well as the compiler. That is we only call uninit using the same predicate as calling init Signed-off-by:
Gabriel Krisman Bertazi <krisman@collabora.co.uk>
-
Chris Wilson authored
gcc-4.7 is not very smart and can not tell that "si" is guarded by size being 0. So it complains, drivers/gpu/drm/i915/intel_csr.c: In function ‘csr_load_work_fn’: drivers/gpu/drm/i915/intel_csr.c:204:3: warning: ‘si’ may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/gpu/drm/i915/intel_csr.c:190:30: note: ‘si’ was declared in Give in and mark si as NULL. Signed-off-by:
Michal Wajdeczko <michal.wajdeczko@intel.com>
-
Chris Wilson authored
drivers/gpu/drm/i915/i915_cmd_parser.c:808:23: error: not an lvalue drivers/gpu/drm/i915/i915_cmd_parser.c:811:23: error: not an lvalue drivers/gpu/drm/i915/i915_cmd_parser.c:814:23: error: not an lvalue drivers/gpu/drm/i915/i915_cmd_parser.c:808:23: error: not an lvalue drivers/gpu/drm/i915/i915_cmd_parser.c:811:23: error: not an lvalue drivers/gpu/drm/i915/i915_cmd_parser.c:814:23: error: not an lvalue drivers/gpu/drm/i915/i915_cmd_parser.c:808:23: error: not an lvalue drivers/gpu/drm/i915/i915_cmd_parser.c:811:23: error: not an lvalue drivers/gpu/drm/i915/i915_cmd_parser.c:814:23: error: not an lvalue drivers/gpu/drm/i915/i915_cmd_parser.c:808:23: error: not an lvalue drivers/gpu/drm/i915/i915_cmd_parser.c:811:23: error: not an lvalue drivers/gpu/drm/i915/i915_cmd_parser.c:814:23: error: not an lvalue If we move the shift into each case not only do we kill the warning from smatch, but we shrink the code slightly: text data bss dec hex filename 1267906 20587 3168 1291661 13b58d before 1267890 20587 3168 1291645 13b57d after Signed-off-by:
-
Chris Wilson authored
gcc-4.4 complains about: struct sgt_dma iter = { .sg = vma->pages->sgl, .dma = sg_dma_address(iter.sg), .max = iter.dma + iter.sg->length, }; drivers/gpu/drm/i915/i915_gem_gtt.c: In function ‘gen8_ppgtt_insert_4lvl’: drivers/gpu/drm/i915/i915_gem_gtt.c:938: error: ‘iter.sg’ is used uninitialized in this function drivers/gpu/drm/i915/i915_gem_gtt.c:939: error: ‘iter.dma’ is used uninitialized in this function and worse generates invalid code that triggers a GPF: BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 IP: gen8_ppgtt_insert_4lvl+0x1b/0x1e0 [i915] PGD 0 Oops: 0000 [#1] SMP Modules linked in: snd_aloop nf_conntrack_ipv6 nf_defrag_ipv6 nf_log_ipv6 ip6table_filter ip6_tables ctr ccm xt_state nf_log_ipv4 nf_log_common xt_LOG xt_limit xt_recent xt_owner xt_addrtype iptable_filter ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack libcrc32c ip_tables dm_mod vhost_net macvtap macvlan vhost tun kvm_intel kvm irqbypass uas usb_storage hid_multitouch btusb btrtl uvcvideo videobuf2_v4l2 videobuf2_core videodev media videobuf2_vmalloc videobuf2_memops sg ppdev dell_wmi sparse_keymap mei_wdt sd_mod iTCO_wdt iTCO_vendor_support rtsx_pci_ms memstick rtsx_pci_sdmmc mmc_core dell_smm_hwmon hwmon dell_laptop dell_smbios dcdbas joydev input_leds hci_uart btintel btqca btbcm bluetooth parport_pc parport i2c_hid intel_lpss_acpi intel_lpss pcspkr wmi int3400_thermal acpi_thermal_rel dell_rbtn mei_me mei snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic ahci libahci acpi_pad xhci_pci xhci_hcd snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_seq snd_seq_device snd_pcm snd_timer snd soundcore int3403_thermal arc4 e1000e ptp pps_core i2c_i801 iwlmvm mac80211 rtsx_pci iwlwifi cfg80211 rfkill intel_pch_thermal processor_thermal_device int340x_thermal_zone intel_soc_dts_iosf i915 video fjes CPU: 2 PID: 2408 Comm: X Not tainted 4.10.0-rc5+ #1 Hardware name: Dell Inc. Latitude E7470/0T6HHJ, BIOS 1.11.3 11/09/2016 task: ffff880219fe4740 task.stack: ffffc90005f98000 RIP: 0010:gen8_ppgtt_insert_4lvl+0x1b/0x1e0 [i915] RSP: 0018:ffffc90005f9b8c8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff8802167d8000 RCX: 0000000000000001 RDX: 00000000ffff7000 RSI: ffff880219f94140 RDI: ffff880228444000 RBP: ffffc90005f9b948 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000080 R13: 0000000000000001 R14: ffffc90005f9bcd7 R15: ffff88020c9a83c0 FS: 00007fb53e1ee920(0000) GS:ffff88024dd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000010 CR3: 000000022ef95000 CR4: 00000000003406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ppgtt_bind_vma+0x40/0x50 [i915] i915_vma_bind+0xcb/0x1c0 [i915] __i915_vma_do_pin+0x6e/0xd0 [i915] i915_gem_execbuffer_reserve_vma+0x162/0x1d0 [i915] i915_gem_execbuffer_reserve+0x4fc/0x510 [i915] ? __kmalloc+0x134/0x250 ? i915_gem_wait_for_error+0x25/0x100 [i915] ? i915_gem_wait_for_error+0x25/0x100 [i915] i915_gem_do_execbuffer+0x2df/0xa00 [i915] ? drm_malloc_gfp.clone.0+0x42/0x80 [i915] ? path_put+0x22/0x30 ? __check_object_size+0x62/0x1f0 ? terminate_walk+0x44/0x90 i915_gem_execbuffer2+0x95/0x1e0 [i915] drm_ioctl+0x243/0x490 ? handle_pte_fault+0x1d7/0x220 ? i915_gem_do_execbuffer+0xa00/0xa00 [i915] ? handle_mm_fault+0x10d/0x2a0 vfs_ioctl+0x18/0x30 do_vfs_ioctl+0x14b/0x3f0 SyS_ioctl+0x92/0xa0 entry_SYSCALL_64_fastpath+0x1a/0xa9 RIP: 0033:0x7fb53b4fcb77 RSP: 002b:00007ffe0c572898 EFLAGS: 00003246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007fb53e17c038 RCX: 00007fb53b4fcb77 RDX: 00007ffe0c572900 RSI: 0000000040406469 RDI: 000000000000000b RBP: 00007fb5376d67e0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000028 R11: 0000000000003246 R12: 0000000000000000 R13: 0000000000000000 R14: 000055eecb314d00 R15: 000055eecb315460 Code: 0f 84 5d ff ff ff eb a2 0f 1f 84 00 00 00 00 00 55 48 89 e5 41 57 41 56 41 55 41 54 53 48 83 ec 58 0f 1f 44 00 00 31 c0 89 4d b0 <4c> 8b 60 10 44 8b 70 0c 48 89 d0 4c 8b 2e 48 c1 e8 27 25 ff 01 RIP: gen8_ppgtt_insert_4lvl+0x1b/0x1e0 [i915] RSP: ffffc90005f9b8c8 CR2: 0000000000000010 Recent gccs, such as 4.9, 6.3 or 7.2, do not generate the warning nor do they explode on use. If we manually create the struct using locals from the stack, this should eliminate this issue, and does not alter code generation with gcc-7.2. Fixes: 894ccebe ("drm/i915: Micro-optimise gen8_ppgtt_insert_entries()") Reported-by:Kelly French <kfrench@federalhill.net> Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com>
-
- 06 Nov, 2017 8 commits
-
-
Michal Wajdeczko authored
Capturing and cleanup and modparams in error state requires some macro tricks. Move that code into separated functions for easier maintenance. Signed-off-by:
-
Michal Wajdeczko authored
We keep details of GuC and HuC in separate error state struct. Make GuC log part of it to group all related data together. Since we are printing uC details at the end, with this change GuC log will be moved there too. v2: comment on new placement of the log (Chris) Signed-off-by:
-
Michal Wajdeczko authored
Include GuC and HuC firmware details in captured error state to provide additional debug information. To reuse existing uc firmware pretty printer, introduce new drm-printer variant that works with our i915_error_state_buf output. Also update uc firmware pretty printer to accept const input. v2: don't rely on current caps (Chris) dump correct fw info (Michal) v3: simplify capture of custom paths (Chris) v4: improve 'why' comment (Joonas) trim output if no fw path (Michal) group code around uc error state (Michal) v5: use error in cleanup_uc (Michal) Suggested-by: -
Michal Wajdeczko authored
Silence smatch by demonstrating that ctch->vma is allocated following a successful chch_init() drivers/gpu/drm/i915/intel_guc_ct.c:204 ctch_open() error: we previously assumed 'ctch->vma' could be null (see line 197) Signed-off-by:
-
Chris Wilson authored
Silence smatch by demonstrating that guc->stage_desc_pool is allocated following a successful guc_stage_desc_pool_create(), drivers/gpu/drm/i915/i915_guc_submission.c:1293 i915_guc_submission_init() error: we previously assumed 'guc->stage_desc_pool' could be null (see line 1261) Signed-off-by:
-
Chris Wilson authored
An oversight in commit 87701b4b ("drm/i915: Only free the oldest stale object before a fresh allocation") was that not only do we have to serialise concurrent users of llist_del_first(), but we also have to lock llist_del_first() vs llist_del_all(). From llist.h, * This can be summarized as follows: * * | add | del_first | del_all * add | - | - | - * del_first | | L | L * del_all | | | - * * Where, a particular row's operation can happen concurrently with a column's * operation, with "-" being no lock needed, while "L" being lock is needed. This should hopefully explain: <4>[ 89.287106] general protection fault: 0000 [#1] PREEMPT SMP <4>[ 89.287126] Modules linked in: snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic x86_pkg_temp_thermal intel_powerclamp coretemp i915 crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core r8169 mii mei_me mei snd_pcm prime_numbers i2c_hid pinctrl_geminilake pinctrl_intel <4>[ 89.287226] CPU: 2 PID: 23 Comm: ksoftirqd/2 Tainted: G U 4.14.0-rc8-CI-CI_DRM_3315+ #1 <4>[ 89.287247] Hardware name: Intel Corp. Geminilake/GLK RVP2 LP4SD (07), BIOS GELKRVPA.X64.0062.B30.1708222146 08/22/2017 <4>[ 89.287270] task: ffff88017ab34ec0 task.stack: ffffc90000128000 <4>[ 89.287290] RIP: 0010:llist_add_batch+0x4/0x20 <4>[ 89.287301] RSP: 0018:ffffc9000012bdb8 EFLAGS: 00010296 <4>[ 89.287314] RAX: ffffffff811017ad RBX: 6e468801a1560000 RCX: ef3e53fceecdeb81 <4>[ 89.287330] RDX: 6e468801a1566130 RSI: ffff880103d73d98 RDI: ffff880103d73d98 <4>[ 89.287346] RBP: ffffc9000012bdb8 R08: ffff88017ab35780 R09: 0000000000000000 <4>[ 89.287361] R10: ffffc9000012bd68 R11: 00000000abb18c3d R12: ffffffffa01369e0 <4>[ 89.287377] R13: ffff88017fd1b8f8 R14: ffff88017ab34ec0 R15: 000000000000000a <4>[ 89.287393] FS: 0000000000000000(0000) GS:ffff88017fd00000(0000) knlGS:0000000000000000 <4>[ 89.287411] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4>[ 89.287424] CR2: 00007ff0c0755018 CR3: 000000016df9b000 CR4: 00000000003406e0 <4>[ 89.287440] Call Trace: <4>[ 89.287511] __i915_gem_free_object_rcu+0x20/0x40 [i915] <4>[ 89.287527] rcu_process_callbacks+0x27a/0x730 <4>[ 89.287544] __do_softirq+0xc0/0x4ae <4>[ 89.287559] ? smpboot_thread_fn+0x2d/0x280 <4>[ 89.287571] run_ksoftirqd+0x1f/0x70 <4>[ 89.287582] smpboot_thread_fn+0x18a/0x280 <4>[ 89.287595] kthread+0x114/0x150 <4>[ 89.287605] ? sort_range+0x30/0x30 <4>[ 89.287615] ? kthread_create_on_node+0x40/0x40 <4>[ 89.287628] ret_from_fork+0x27/0x40 <4>[ 89.287641] Code: 0d 48 83 ea 01 4c 89 c1 48 83 fa ff 74 12 48 23 0c d7 74 ed 48 c1 e2 06 48 0f bd c9 48 8d 04 0a 5d c3 90 90 90 90 90 55 48 89 e5 <48> 8b 0a 48 89 0e 48 89 c8 f0 48 0f b1 3a 48 39 c1 75 ed 48 85 <1>[ 89.287774] RIP: llist_add_batch+0x4/0x20 RSP: ffffc9000012bdb8 <4>[ 89.287826] ---[ end trace e775d15174d8ae02 ]--- (Lockless lists are only easy (and lockless) when only using llist_add/llist_del_all!) Fixes: 87701b4b ("drm/i915: Only free the oldest stale object before a fresh allocation") Signed-off-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com>
-
Chris Wilson authored
Some tests are designed to exercise the limits of the HW and may trigger unintended side-effects making the machine unusable. This should not be executed by default, but are still useful for early platform validation. References: https://bugs.freedesktop.org/show_bug.cgi?id=103453Signed-off-by:
-
Chris Wilson authored
As we bind, and unbind on error, we want to be sure that the vma->flags are updated to reflect the binding state so that on the next invocation all is well. v2: Take two. v3: Take three; vma-misplaced is checking map-and-fenceable so keep it last! Signed-off-by:
-
- 03 Nov, 2017 3 commits
-
-
Chris Wilson authored
After a reset, we may immediately begin executing requests on restarting the engines. Ergo this has to be last step with all re-initialisation completed beforehand. The mocs setup was after we started executing the requests; do it earlier! Signed-off-by:
-
Tvrtko Ursulin authored
GEM_BUG_ON if the packed bits do not fit into the specified width. v2: Avoid using the macro argument twice. v3: Drop unnecessary braces. (Joonas) Signed-off-by:
-
Tvrtko Ursulin authored
We have to reject unknown flags for uAPI considerations, and also because the curent implementation limits their i915 storage space to two bits. v2: (Chris Wilson) * Fix fail in ABI check. * Added unknown flags and BUILD_BUG_ON. v3: * Use ARCH_KMALLOC_MINALIGN instead of alignof. (Chris Wilson) Signed-off-by:
-
- 02 Nov, 2017 6 commits
-
-
Lionel Landwerlin authored
Because dev_priv is 0-ed it's not currently an issue, but since we have dev_priv->perf.oa.test_config.uuid size at uuid + 1, we could just copy the null character. v2: Use strlcpy instead of strncpy (Chris) Signed-off-by:
Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by:
-
Chris Wilson authored
Before we assert that the engine is idle, make sure we flush any residual tasklet. After that point, if the engine is not idle, more work may be queued despite us trying to park the engine and go to sleep. References: https://bugs.freedesktop.org/show_bug.cgi?id=103479Signed-off-by:
-
Mika Kuoppala authored
There is a possibility on gen9 hardware to miss the forcewake ack message. The recommended workaround is to use another free bit and toggle it until original bit is successfully acknowledged. Some future gen9 revs might or might not fix the underlying issue but using fallback forcewake bit dance can be considered as harmless: without the ack timeout we never reach the fallback bit forcewake. Thus as of now we adopt a blanket approach for all gen9 and leave the bypassing the fallback bit approach for future patches if corresponding hw revisions do appear. Commit 83e33372 ("drm/i915: Increase maximum polling time to 50ms for forcewake request/clear ack") did increase the forcewake timeout. If the issue was a delayed ack, future work could include finding a suitable timeout value both for primary ack and reserve toggle to reduce the worst case latency. v2: use bit 15, naming, comment (Chris), only wait fallback ack v3: fix return on fallback, backoff after fallback write (Chris) v4: udelay on first pass, grammar (Chris) v4: s/reserve/fallback References: HSDES #1604254524 References: https://bugs.freedesktop.org/show_bug.cgi?id=102051 Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com> Signed-off-by:
-
Michel Thierry authored
This patch adds per engine reset and recovery (TDR) support when GuC is used to submit workloads to GPU. In the case of i915 directly submission to ELSP, driver manages hang detection, recovery and resubmission. With GuC submission these tasks are shared between driver and GuC. i915 is still responsible for detecting a hang, and when it does it only requests GuC to reset that Engine. GuC internally manages acquiring forcewake and idling the engine before resetting it. Once the reset is successful, i915 takes over again and handles the resubmission. The scheduler in i915 knows which requests are pending so after resetting a engine, pending workloads/requests are resubmitted again. v2: s/i915_guc_request_engine_reset/i915_guc_reset_engine/ to match the non-guc function names. v3: Removed debug message about engine restarting from which request, since the new baseline do it regardless of submission mode. (Chris) v4: Rebase. v5: Do not pass unnecessary reporting flags to the fw (Jeff); tasklet_schedule(&execlists->irq_tasklet) handles the resubmit; rebase. v6: Rename the existing reset engine function and share a similar interface between guc and non-guc paths (Chris). Signed-off-by:
Michel Thierry <michel.thierry@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20171031225309.10888-1-michel.thierry@intel.comReviewed-by:
Jeff McGee <jeff.mcgee@intel.com> Signed-off-by:
-
Michel Thierry authored
intel_guc_reset sounds more like the microcontroller is the one performing a reset, while in this case is the opposite. intel_reset_guc not only makes it clearer, it follows the other intel_reset functions available. v2: Print error message in English (Tvrtko). Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Signed-off-by:
-
Jeff McGee authored
If GuC firmware performs an engine reset while that engine had a preemption pending, it will set the terminated attribute bit on our preemption stage descriptor. GuC firmware retains all pending work items for a high-priority GuC client, unlike the normal-priority GuC client where work items are dropped. It wants to make sure the preempt- to-idle work doesn't run when scheduling resumes, and uses this bit to inform its scheduler and presumably us as well. Our job is to clear it for the next preemption after reset, otherwise that and future preemptions will never complete. We'll just clear it every time. Signed-off-by:
-
- 01 Nov, 2017 5 commits
-
-
Mika Kahola authored
For Cannonlake the number of scalers for each pipe is 2. Let's increase the number of scalers for pipe C. v2: Use INTEL_GEN() instead of IS_CANNONLAKE() Signed-off-by:
Mika Kahola <mika.kahola@intel.com> Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
Chris Wilson authored
If the we think the engine is still active when we attempt to park it, we want more details -- so dump the engine state. References: https://bugs.freedesktop.org/show_bug.cgi?id=103479Signed-off-by:
-
Chris Wilson authored
We will want to break this down to give detailed per-engine warnings as to why we still think we are active as we attempt to park the engines. For the first step, just move the warning verbatim from the idle-worker to intel_engines_park(). Signed-off-by:
-
Chris Wilson authored
We will disarm the breadcrumb interrupt if we see a user interrupt whilst no one is waiting. This may race with the call to intel_engine_disarm_breadcrumbs() triggering an assert that we aren't trying to do the same job twice. Prevent this by checking that the irq is still armed after flushing the interrupt (for the irq spinlock). Fixes: bcbd5c33 ("drm/i915/guc: Always enable the breadcrumbs irq") Signed-off-by:
-
Chris Wilson authored
In case the object has changed tiling between calls to execbuf, we need to check if the existing offset inside the GTT matches the new tiling constraint. We even need to do this for "unfenced" tiled objects, where the 3D commands use an implied fence and so the object still needs to match the physical fence restrictions on alignment (only required for gen2 and early gen3). In commit 2889caa9 ("drm/i915: Eliminate lots of iterations over the execobjects array"), the idea was to remove the second guessing and only set the NEEDS_MAP flag when required. However, the entire check for an unusable offset for fencing was removed and not just the secondary check. I.e. /* avoid costly ping-pong once a batch bo ended up non-mappable */ if (entry->flags & __EXEC_OBJECT_NEEDS_MAP && !i915_vma_is_map_and_fenceable(vma)) return !only_mappable_for_reloc(entry->flags); was entirely removed as the ping-pong between execbuf passes was fixed, but its primary purpose in forcing unaligned unfenced access to be rebound was forgotten. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103502 Fixes: 2889caa9 ("drm/i915: Eliminate lots of iterations over the execobjects array") Signed-off-by:
-
- 31 Oct, 2017 3 commits
-
-
Michel Thierry authored
There is no need check if PPGTT is disabled because that not possible in CNL. Execlists and GuC submission modes rely on at least aliasing PPGTT and even intel_sanitize_enable_ppgtt says: "We don't allow disabling PPGTT for gen9+ as it's a requirement for execlists, the sole mechanism available to submit work." Suggested-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
Ville Syrjälä authored
encoder->type isn't genreally safe around DDI ports, so let's replace some uses in the audio code with the crtc state's output_types instead. Actually in these cases encoder->type would work since the DP SST case is only relevant for VLV/CHV and encoder->type==DP is a thing on those platforms. The DP MST cases would work as well since MST encoder->type==DP_MST always. But I think it's best to try and minimize the encoder->type use in general to avoid showing a bad example to people. Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com>
-
Ville Syrjälä authored
Explicitly pass the crtc and connector states into the audio code enable/disable hooks, and plumb them all the way down. This gets rid of almost all crtc->config and encoder->crtc uses. The one place where we still use them is i915_audio_component_sync_audio_rate() since that gets called from the audio driver and we don't have explicit states around then. Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
- 30 Oct, 2017 4 commits
-
-
Chris Wilson authored
To quote kbuild/makefiles.txt: cc-disable-warning checks if gcc supports a given warning and returns the commandline switch to disable it. This special function is needed, because gcc 4.4 and later accept any unknown -Wno-* option and only warn about it if there is another warning in the source file. This is exactly what we were trying to achieve with cc-option -Wno-foo and failed miserably. Reported-by: kbuild-all@01.org Fixes: 39bf4de8 ("drm/i915: Add -Wall -Wextra to our build, set warnings to full") Signed-off-by: -
Ville Syrjälä authored
Eliminate the partially duplicated DDI readout code from MST, and instead just call intel_ddi_get_config(). As a nice bonus we get more cross checking as intel_ddi_get_config() will populate output_types based on the actual mode of the DDI port. Additonally intel_ddi_get_config() must be changed to get the crtc from the passed in crtc state rather than from the encoder->crtc link. encoder->crtc really shouldn't be used anyway. v2: Rebased on BXT MST latency_optim fix Make intel_ddi_clock_get() static Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: -
Ville Syrjälä authored
Pass an old crtc state to intel_ddi_post_disable() from the MST code. Note that this crtc state won't necessaitly match the one that was passed to intel_ddi_pre_enable() if the first stream to be enabled isn't the last stream to be disabled. But this is fine since the states should be identical in every important way. This does mean people frobbing the DDI pre_enable/post_disable hooks have to pay attention in what parts of the state they consult. The alternative would be to inline the relevant code into the MST code. That is actually what we used to do for pre_enable before commit e081c846 ("drm/i915: Remove duplicate DDI enabling logic from MST path"). For post_disable we've always called the DDI hook. v2: Pimp up the comments explaining the MST issues Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by:
-
Ville Syrjälä authored
We should be using the DPLL hw state we got from the current crtc state to determine the corresponding port clock frequency rather than getting it via the current state programmed into the DPLL. v2: Rebase due to intel_dpll_id changes Signed-off-by:
-
