- 04 Mar, 2010 3 commits
-
-
Krishna Gudipati authored
bfa_ioc.c: - Enable IOC auto-recovery by default. - When CNA is in FC mode, return IOC type as FC (not FCoE) bfa_iocfc.c: - Set fcmode before pci initialization/setup. Signed-off-by:
Krishna Gudipati <kgudipat@brocade.com> Signed-off-by:
James Bottomley <James.Bottomley@suse.de>
-
Krishna Gudipati authored
Clear virtual links was not propagated upwards to bfa from fw. This resulted in HBA and switch being in an inconsistent state. So defined a new LPS event for clear virtual link on a vport, and also now clear virtual link on a baseport, is sent as a link down event from the fw. Signed-off-by:
-
Krishna Gudipati authored
Added separate MSI-X module parameters to selectively enable / disable MSI-X interrupts for both Brocade HBA and CNA's. Signed-off-by:
-
- 03 Mar, 2010 37 commits
-
-
James Bottomley authored
RAID attributes uses scsi_is_sdev_device() to gate some SCSI specific checking code. This causes two problems. Firstly if SCSI == n just defining scsi_is_sdev_device() to return false might not be enough to prevent gcc from emitting the code (and thus referring to undefined symbols), so this needs surrounding with an ifdef. Secondly, using scsi_is_sdev_device() when SCSI is either y or m gives a subtle problem in the m case: raid_attrs must also be m to use the symbol. Do the usual Kconfig jiggery-pokery to fix this. Reported-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Boaz Harrosh authored
Doing CHECK="smatch --two-passes gives: drivers/scsi/osd/osd_initiator.c +1435 osd_finalize_request warning: assignment to 'ret' was never used Which is an unchecked possible allocation failure, Fixed. Reported-by:
Dan Carpenter <error27@gmail.com> Signed-off-by:
Boaz Harrosh <bharrosh@panasas.com> Signed-off-by:
-
Martin K. Petersen authored
Commit e3deec09 incorrectly assumed that the B0 and B1 page lengths were limited to 32 bytes. The B0 VPD page length is defined to be 64 bytes when the device supports thin provisioning. B1 is always defined to be 64 bytes. Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Reported-by:
-
James Smart authored
Signed-off-by:
James Smart <james.smart@emulex.com> Signed-off-by:
-
James Smart authored
- Added round robin FCF failover on initial or FCF rediscovery FLOGI failure. Signed-off-by:
-
James Smart authored
- Prevent Vport discovery after reg_new_vport completes when physical logged in using FDISC. - Remove fast FCF failover fabric name matching. Allow failover to FCFs connected to different fabrics. - Added fast FCF failover in response to FCF DEAD event on current FCF record. Signed-off-by:
-
James Smart authored
Signed-off-by:
-
James Smart authored
- Clear LPFC_DRIVER_ABORTED on FCP command completion. - Clear exchange busy flag when I/O is aborted and found on aborted list. - Free sglq when XRI_ABORTED event is processed before release of IOCB. - Only process iocb as aborted when LPFC_DRIVER_ABORTED is set. Signed-off-by:
-
James Smart authored
- Add Logging message for critial errors. - Remove unused variable from lpfc_nodev_tmo_show - Update supress_link_up parameter with #define values. Signed-off-by:
-
James Smart authored
- Add NULL checks to the pointers for the config_async mailbox and dump_wakeup_params mailbox. - Add code to check return value of lpfc_read_sparams everywhere and handle failures appropriately. Signed-off-by:
-
Stephen M. Cameron authored
Signed-off-by:
Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by:
-
Stephen M. Cameron authored
This uses the scatter-gather chaining feature of Smart Array controllers. 32 scatter-gather elements are embedded in the "command list", and the last element in the list may be marked as a "chain pointer", and point to an additional block of scatter gather elements. The precise number of scatter gather elements supported is dependent on the particular kind of Smart Array, and is determined at runtime by querying the hardware. Signed-off-by:
-
Stephen M. Cameron authored
Signed-off-by:
-
Stephen M. Cameron authored
Signed-off-by:
-
Mike Miller authored
The intent of the scan thread was to allow a UNIT ATTENTION/LUN DATA CHANGED condition encountered in the interrupt handler to trigger a rescan of devices, which can't be done in interrupt context. However, we weren't able to get this to work, due to multiple such UNIT ATTENTION conditions arriving during the rescan, during updating of the SCSI mid layer, etc. There's no way to tell the devices, "stand still while I scan you!" Since it doesn't work, there's no point in having the thread, as the rescan triggered via ioctl or sysfs can be done without such a thread. Signed-off-by:
Mike Miller <mikem@beardog.cce.hp.com> Signed-off-by:
-
Stephen M. Cameron authored
Signed-off-by:
-
Stephen M. Cameron authored
The SCSI status does not need to be shifted. Signed-off-by:
-
Stephen M. Cameron authored
Signed-off-by:
-
Stephen M. Cameron authored
Signed-off-by:
-
Brian King authored
Adds support for resuming from suspend for IBM VFC devices. We may have lost an interrupt over the suspend, so we just kick the interrupt handler to process anything that is outstanding. We expect to find a transport event indicating we need to reestablish our CRQ. Signed-off-by:
Brian King <brking@linux.vnet.ibm.com> Signed-off-by:
-
Brian King authored
Adds support for resuming from suspend for IBM VSCSI devices. We may have lost an interrupt over the suspend, so we just kick the interrupt handler to process anything that is outstanding. We expect to find a transport event indicating we need to reestablish our CRQ. Signed-off-by:
-
Jayamohan Kallickal authored
This patch ensures that we alloc only one EQ if we are if we are not in msix mode Signed-off-by:
Jayamohan Kallickal <jayamohank@serverengines.com> Signed-off-by:
-
Jayamohan Kallickal authored
This patch fixes some situations where enough resources were not avaialable when targets exceeded a certain limit Signed-off-by:
-
Jayamohan Kallickal authored
This patch removes some debug lines which are unnecessary and also aligns some lines in code Signed-off-by:
-
Jayamohan Kallickal authored
This patch cleans up abort handling when TMF is sent Signed-off-by:
-
Jayamohan Kallickal authored
This patch fixes a situation where we could call udelay while holding spin_lock Signed-off-by:
-
Jayamohan Kallickal authored
This patch cleans up device and target reset handling for the driver Signed-off-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
-
Jayamohan Kallickal authored
The iscsi_eh_target_reset has been modified to attempt target reset only. If it fails, then iscsi_eh_session_reset will be called. Signed-off-by:
-
Wayne Boyer authored
This patch adds the PCI ID definitions for new adapters based on the next generation 64 bit IOA PCI interface chip. New entries have been added to the ipr_pci_table[] array for the adapters and to the ipr_chip[] array for the new versions of the chip. Older entries have been removed for cards that did not ship. Signed-off-by:
Wayne Boyer <wayneb@linux.vnet.ibm.com> Signed-off-by:
-
Wayne Boyer authored
This patch adds support for new errors that can be received from adapters using the next generation 64 bit IOA PCI interface chip. Signed-off-by:
-
Wayne Boyer authored
This patch adds support for using the new IOA initialization feedback register. It also enables 64 bit support in the ipr_ioafp_identify_hrrq and ipr_mask_and_clear_interrupts routines. Signed-off-by:
-
Wayne Boyer authored
This patch adds a reboot notifier that will issue a shutdown prepare command to all adapters. This helps to prevent a problem where the primary adapter can get shut down before the secondary adapter and cause the secondary adapter to fail over and log and error. This patch also removes the "enable_cache" paramater as it is obsolete. Write cache for an adapter is now controlled from the iprconfig utility. Signed-off-by:
-
Wayne Boyer authored
This patch adds the hardware assisted smart dump functionality for the next generation IOA PCI interface chip. Signea-off-by:
-
Wayne Boyer authored
Add support for the new log data notification and overlay IDs. Signed-off-by:
-
Wayne Boyer authored
This patch changes the configuration table structures and related code such that both 32 bit and 64 bit based adapters can work with the driver. This patch also implements the code to generate the virtual bus/id/lun values for devices connected to the new adapters. It also implements support for the new device resource path. Signed-off-by:
-
Wayne Boyer authored
This patch adds the entry to the ipr_chip_cfg array that defines the register offsets for the next generation 64 bit IOA PCI interface chip. Signed-off-by:
-
Wayne Boyer authored
Change the adapter command structures such that both 32 bit and 64 bit based adapters can work with the driver. Signed-off-by:
-
