- 23 Apr, 2019 3 commits
-
-
Benjamin Tissoires authored
I am actually suggesting people to not populate this list, and I should probably start to apply my advices to myself. The end result means that if your initrd is lacking hid-logitech-dj or hid-logitech-hidpp, but still contains hid-generic, then your keyboard will work during pre-init. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com>
-
Benjamin Tissoires authored
-
Srinivas Pandruvada authored
Add Comet Lake PCI device ID to the supported device list. Signed-off-by:
Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz>
-
- 11 Apr, 2019 1 commit
-
-
Hui Wang authored
This reverts commit 74e7c6c8. It finally turns out the touchpad is an engineering sample and it is not the Synaptics touchpad. Let us revert this patch otherwise it will affect the real Synaptics touchpad. Signed-off-by:
Hui Wang <hui.wang@canonical.com> Signed-off-by:
-
- 03 Apr, 2019 1 commit
-
-
Dmitry Torokhov authored
According to HUTRR89 usage 0x1cb from the consumer page was assigned to allow launching desktop-aware assistant application, so let's add the mapping. Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
- 01 Apr, 2019 4 commits
-
-
Hui Wang authored
We have a new Dell laptop which has the synaptics I2C touchpad (06cb:7e7e) on it. After booting up the Linux, the touchpad doesn't work, there is no interrupt when touching the touchpad, after disable the runtime PM, everything works well. I also tried the quirk of I2C_HID_QUIRK_DELAY_AFTER_SLEEP, it is better after applied this quirk, there are interrupts but data it reports is invalid. Signed-off-by:
-
Hans de Goede authored
According to hidpp20_batterylevel_get_battery_info my Logitech K270 keyboard reports only 2 battery levels. This matches with what I've seen after testing with batteries at varying level of fullness, it always reports either 5% or 30%. Windows reports "battery good" for the 30% level. I've captured an USB trace of Windows reading the battery and it is getting the same info as the Linux hidpp code gets. Now that Linux handles these devices as hidpp devices, it reports the battery as being low as it treats anything under 31% as low, this leads to the user constantly getting a "Keyboard battery is low" warning from GNOME3, which is very annoying. This commit fixes this by changing the low threshold to anything under 30%, which I assume is what Windows does. Signed-off-by:
-
Hans de Goede authored
Remove the hidpp_is_connected() function wrapper, and have the callers directly call hidpp_root_get_protocol_version() instead. Signed-off-by:
-
Hans de Goede authored
Simply always print the HID++ version on hidpp_root_get_protocol_version success. This also fixes the version not being printed when a HID++ device connected through a receiver is already connected when the hidpp driver is loaded. Signed-off-by:
-
- 27 Mar, 2019 1 commit
-
-
Jeffrey Hugo authored
Similar to commit edfc3722 ("HID: quirks: Fix keyboard + touchpad on Toshiba Click Mini not working"), the Lenovo Miix 630 has a combo keyboard/touchpad device with vid:pid of 04F3:0400, which is shared with Elan touchpads. The combo on the Miix 630 has an ACPI id of QTEC0001, which is not claimed by the elan_i2c driver, so key on that similar to what was done for the Toshiba Click Mini. Signed-off-by:
Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Signed-off-by:
-
- 20 Mar, 2019 1 commit
-
-
Peter Hutterer authored
hidpp_scroll_counter_handle_scroll() doesn't expect a 0-value scroll event, it gets interpreted as a negative scroll direction event. This can cause scroll direction resets and thus broken scrolling. Fixes: 4435ff2f ("HID: logitech: Enable high-resolution scrolling on Logitech mice") Cc: stable@vger.kernel.org # v5.0 Reported-and-tested-by:
Aimo Metsälä <aimetsal@outlook.com> Signed-off-by:
Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by:
-
- 19 Mar, 2019 2 commits
-
-
He, Bo authored
There is a race condition that could happen if hid_debug_rdesc_show() is running while hdev is in the process of going away (device removal, system suspend, etc) which could result in NULL pointer dereference: BUG: unable to handle kernel paging request at 0000000783316040 CPU: 1 PID: 1512 Comm: getevent Tainted: G U O 4.19.20-quilt-2e5dc0ac-00029-gc455a447dd55 #1 RIP: 0010:hid_dump_device+0x9b/0x160 Call Trace: hid_debug_rdesc_show+0x72/0x1d0 seq_read+0xe0/0x410 full_proxy_read+0x5f/0x90 __vfs_read+0x3a/0x170 vfs_read+0xa0/0x150 ksys_read+0x58/0xc0 __x64_sys_read+0x1a/0x20 do_syscall_64+0x55/0x110 entry_SYSCALL_64_after_hwframe+0x49/0xbe Grab driver_input_lock to make sure the input device exists throughout the whole process of dumping the rdesc. [jkosina@suse.cz: update changelog a bit] Signed-off-by:
he, bo <bo.he@intel.com> Signed-off-by:
"Zhang, Jun" <jun.zhang@intel.com> Signed-off-by:
-
Kangjie Lu authored
create_singlethread_workqueue may fail and return NULL. The fix checks if it is NULL to avoid NULL pointer dereference. Also, the fix moves the call of create_singlethread_workqueue earlier to avoid resource-release issues. Signed-off-by:
Kangjie Lu <kjlu@umn.edu> Signed-off-by:
-
- 18 Mar, 2019 2 commits
-
-
Kai-Heng Feng authored
Commit 71f6fa90 ("HID: increase maximum global item tag report size to 256") increases the max report size from 128 to 256. We also need to update the report size in hid_field_extract() otherwise it complains and truncates now valid report size: [ 406.165461] hid-sensor-hub 001F:8086:22D8.0002: hid_field_extract() called with n (192) > 32! (kworker/5:1) BugLink: https://bugs.launchpad.net/bugs/1818547 Fixes: 71f6fa90 ("HID: increase maximum global item tag report size to 256") Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by:
-
Rodrigo Rivas Costa authored
When using this driver with the wireless dongle and some usermode program that monitors every input device (acpid, for example), while another usermode client opens and closes the low-level device repeadedly, the system eventually deadlocks. The reason is that steam_input_register_device() must not be called with the mutex held, because the input subsystem has its own synchronization that clashes with this one: it is possible that steam_input_open() is called before input_register_device() returns, and since steam_input_open() needs to lock the mutex, it deadlocks. However we must hold the mutex when calling any function that sends commands to the controller. If not, random commands end up falling fail. Reported-by:
Simon Gene Gottlieb <simon@gottliebtfreitag.de> Signed-off-by:
Rodrigo Rivas Costa <rodrigorivascosta@gmail.com> Tested-by:
-
- 11 Mar, 2019 4 commits
-
-
Colin Ian King authored
Currently ver_ptr is being null checked twice, once before calling usb_string and once afterwards. The second null check is redundant and can be removed, remove it. Detected by CoverityScan, CID#1477308 ("Logically dead code") Signed-off-by:Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Andy Shevchenko authored
The kernel-doc annotation is misused for hid_mouse_ignore_list. The script complains about it: drivers/hid/hid-quirks.c:894: warning: cannot understand function prototype: 'const struct hid_device_id hid_mouse_ignore_list[] = ' Drop the annotation to make script happy. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Arnd Bergmann authored
The newly added power supply code fails to link when the power supply core code is disabled: drivers/hid/hid-asus.o: In function `asus_battery_get_property': hid-asus.c:(.text+0x11de): undefined reference to `power_supply_get_drvdata' drivers/hid/hid-asus.o: In function `asus_probe': hid-asus.c:(.text+0x170c): undefined reference to `devm_power_supply_register' hid-asus.c:(.text+0x1734): undefined reference to `power_supply_powers' drivers/hid/hid-asus.o: In function `asus_raw_event': hid-asus.c:(.text+0x1914): undefined reference to `power_supply_changed' Select the subsystem from Kconfig as we do for other hid drivers already. Fixes: 6311d329 ("HID: hid-asus: Add BT keyboard dock battery monitoring support") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Louis Taylor authored
When building with -Wformat, clang warns: drivers/hid/hid-quirks.c:1075:27: warning: format specifies type 'unsigned short' but the argument has type '__u32' (aka 'unsigned int') [-Wformat] bl_entry->driver_data, bl_entry->vendor, ^~~~~~~~~~~~~~~~ ./include/linux/hid.h:1170:48: note: expanded from macro 'dbg_hid' printk(KERN_DEBUG "%s: " format, __FILE__, ##arg); \ ~~~~~~ ^~~ drivers/hid/hid-quirks.c:1076:4: warning: format specifies type 'unsigned short' but the argument has type '__u32' (aka 'unsigned int') [-Wformat] bl_entry->product); ^~~~~~~~~~~~~~~~~ ./include/linux/hid.h:1170:48: note: expanded from macro 'dbg_hid' printk(KERN_DEBUG "%s: " format, __FILE__, ##arg); \ ~~~~~~ ^~~ drivers/hid/hid-quirks.c:1242:12: warning: format specifies type 'unsigned short' but the argument has type '__u32' (aka 'unsigned int') [-Wformat] quirks, hdev->vendor, hdev->product); ^~~~~~~~~~~~ ./include/linux/hid.h:1170:48: note: expanded from macro 'dbg_hid' printk(KERN_DEBUG "%s: " format, __FILE__, ##arg); \ ~~~~~~ ^~~ drivers/hid/hid-quirks.c:1242:26: warning: format specifies type 'unsigned short' but the argument has type '__u32' (aka 'unsigned int') [-Wformat] quirks, hdev->vendor, hdev->product); ^~~~~~~~~~~~~ ./include/linux/hid.h:1170:48: note: expanded from macro 'dbg_hid' printk(KERN_DEBUG "%s: " format, __FILE__, ##arg); \ ~~~~~~ ^~~ 4 warnings generated. This patch fixes the format strings to use the correct format type for unsigned ints. Link: https://github.com/ClangBuiltLinux/linux/issues/378Signed-off-by:
Louis Taylor <louis@kragniz.eu> Reviewed-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
-
- 08 Mar, 2019 21 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hidLinus Torvalds authored
Pull HID updates from Jiri Kosina: - support for Pro Pen slim, from Jason Gerecke - power management improvements to Intel-ISH driver, from Song Hongyan - UCLogic driver revamp in order to be able to support wider range of Huion tablets, from Nikolai Kondrashov - Asus Transbook support, from NOGUCHI Hiroshi - other assorted small bugfixes / cleanups and device ID additions * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (46 commits) HID: Remove Waltop tablets from hid_have_special_driver HID: Remove KYE tablets from hid_have_special_driver HID: Remove hid-uclogic entries from hid_have_special_driver HID: uclogic: Do not initialize non-USB devices HID: uclogic: Add support for Ugee G5 HID: uclogic: Support Gray-coded rotary encoders HID: uclogic: Support faking Wacom pad device ID HID: uclogic: Add support for XP-Pen Deco 01 HID: uclogic: Add support for XP-Pen Star G640 HID: uclogic: Add support for XP-Pen Star G540 HID: uclogic: Add support for Ugee EX07S frame controls HID: uclogic: Add support for Ugee M540 HID: uclogic: Add support for Ugee 2150 HID: uclogic: Support v2 protocol HID: uclogic: Support fragmented high-res reports HID: uclogic: Support in-range reporting emulation HID: uclogic: Designate current protocol v1 HID: uclogic: Re-initialize tablets on resume HID: uclogic: Extract tablet parameter discovery into a module HID: uclogic: Extract report descriptors to a module ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatchingLinus Torvalds authored
Pull livepatching updates from Jiri Kosina: - support for something we call 'atomic replace', and allows for much better handling of cumulative patches (which is something very useful for distros), from Jason Baron with help of Petr Mladek and Joe Lawrence - improvement of handling of tasks blocking finalization, from Miroslav Benes - update of MAINTAINERS file to reflect move towards group maintainership * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching: (22 commits) livepatch/selftests: use "$@" to preserve argument list livepatch: Module coming and going callbacks can proceed with all listed patches livepatch: Proper error handling in the shadow variables selftest livepatch: return -ENOMEM on ptr_id() allocation failure livepatch: Introduce klp_for_each_patch macro livepatch: core: Return EOPNOTSUPP instead of ENOSYS selftests/livepatch: add DYNAMIC_DEBUG config dependency livepatch: samples: non static warnings fix livepatch: update MAINTAINERS livepatch: Remove signal sysfs attribute livepatch: Send a fake signal periodically selftests/livepatch: introduce tests livepatch: Remove ordering (stacking) of the livepatches livepatch: Atomic replace and cumulative patches documentation livepatch: Remove Nop structures when unused livepatch: Add atomic replace livepatch: Use lists to manage patches, objects and functions livepatch: Simplify API by removing registration step livepatch: Don't block the removal of patches loaded after a forced transition livepatch: Consolidate klp_free functions ...
-
git://anongit.freedesktop.org/drm/drmLinus Torvalds authored
Pull drm updates from Dave Airlie: "This is the main drm pull request for the 5.1 merge window. The big changes I'd highlight are: - nouveau has HMM support now, there is finally an in-tree user so we can quieten down the rip it out people. - i915 now enables fastboot by default on Skylake+ - Displayport Multistream support has been refactored and should hopefully be more reliable. Core: - header cleanups aiming towards removing drmP.h - dma-buf fence seqnos to 64-bits - common helper for DP mst hotplug for radeon,i915,amdgpu + new refcounting scheme - MST i2c improvements - drm_syncobj_cb removal - ARM FB compression fourcc - P010 + P016 fourcc - allwinner tiled format modifier - i2c over aux I2C_M_STOP support - DRM_AUTH handling fixes TTM: - ref/unref renaming New driver: - ARM komeda display driver scheduler: - refactor mirror list handling - rework hw fence processing - 0 run queue entity fix bridge: - TI DS90C185 LVDS bridge - thc631lvdm83d bridge improvements - cadence + allwinner DSI ported to generic phy panels: - Sitronix ST7701 panel - Kingdisplay KD097D04 - LeMaker BL035-RGB-002 - PDA 91-00156-A0 - Innolux EE101IA-01D i915: - Enable fastboot by default on SKL+/VLV/CHV - Export RPCS configuration for ICL media driver - Coffelake PCI ID - CNL clocks setup fixes - ACPI/PMIC support for MIPI/DSI - Per-engine WA init for all engines - Shrinker locking fixes - Kerneldoc updates - Lots of ring improvements and reset fixes - Coffeelake GVT Support - VFIO GVT EDID Region support - runtime PM wakeref tracking - ILK->IVB primary plane enable delays - userptr mutex locking fixes - DSI fixes - LVDS/TV cleanups - HW readout fixes - LUT robustness fixes - ICL display and watermark fixes - gem mmap race fix amdgpu: - add scheduled dependencies interface - DCC on scanout surfaces - vega10/20 BACO support - Multiple IH rings on soc15 - XGMI locking fixes - DC i2c/aux cleanups - runtime SMU debug interface - Kexec improvmeents - SR-IOV fixes - DC freesync + ABM fixes - GDS fixes - GPUVM fixes - vega20 PCIE DPM switching fixes - Context priority handling fixes radeon: - fix missing break in evergreen parser nouveau: - SVM support via HMM msm: - QCOM Compressed modifier support exynos: - s5pv210 rotator support imx: - zpos property support - pending update fixes v3d: - cache flush improvments vc4: - reflection support - HDMI overscan support tegra: - CEC refactoring - HDMI audio fixes - Tegra186 prep work - SOR crossbar device tree fixes sun4i: - implicit fencing support - YUV and scalar support improvements - A23 support - tiling fixes atmel-hlcdc: - clipping and rotation property fixes qxl: - BO and PRIME improvements - generic fbdev emulation dw-hdmi: - HDMI 2.0 2160p - YUV420 ouput rockchip: - implicit fencing support - reflection proerties virtio-gpu: - use generic fbdev emulation tilcdc: - cpufreq vs crtc init fix rcar-du: - R8A774C0 support - D3/E3 RGB output routing fixes and DPAD0 support - RA87744 LVDS support bochs: - atomic and generic fbdev emulation - ID mismatch error on bochs load meson: - remove firmware fbs" * tag 'drm-next-2019-03-06' of git://anongit.freedesktop.org/drm/drm: (1130 commits) drm/amd/display: Use vrr friendly pageflip throttling in DC. drm/imx: only send commit done event when all state has been applied drm/imx: allow building under COMPILE_TEST drm/imx: imx-tve: depend on COMMON_CLK drm/imx: ipuv3-plane: add zpos property drm/imx: ipuv3-plane: add function to query atomic update status gpu: ipu-v3: prg: add function to get channel configure status gpu: ipu-v3: pre: add double buffer status readback drm/amdgpu: Bump amdgpu version for context priority override. drm/amdgpu/powerplay: fix typo in BACO header guards drm/amdgpu/powerplay: fix return codes in BACO code drm/amdgpu: add missing license on baco files drm/bochs: Fix the ID mismatch error drm/nouveau/dmem: use dma addresses during migration copies drm/nouveau/dmem: use physical vram addresses during migration copies drm/nouveau/dmem: extend copy function to allow direct use of physical addresses drm/nouveau/svm: new ioctl to migrate process memory to GPU memory drm/nouveau/dmem: device memory helpers for SVM drm/nouveau/svm: initial support for shared virtual memory drm/nouveau: prepare for enabling svm with existing userspace interfaces ... -
Linus Torvalds authored
Merge more updates from Andrew Morton: - some of the rest of MM - various misc things - dynamic-debug updates - checkpatch - some epoll speedups - autofs - rapidio - lib/, lib/lzo/ updates * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (83 commits) samples/mic/mpssd/mpssd.h: remove duplicate header kernel/fork.c: remove duplicated include include/linux/relay.h: fix percpu annotation in struct rchan arch/nios2/mm/fault.c: remove duplicate include unicore32: stop printing the virtual memory layout MAINTAINERS: fix GTA02 entry and mark as orphan mm: create the new vm_fault_t type arm, s390, unicore32: remove oneliner wrappers for memblock_alloc() arch: simplify several early memory allocations openrisc: simplify pte_alloc_one_kernel() sh: prefer memblock APIs returning virtual address microblaze: prefer memblock API returning virtual address powerpc: prefer memblock APIs returning virtual address lib/lzo: separate lzo-rle from lzo lib/lzo: implement run-length encoding lib/lzo: fast 8-byte copy on arm64 lib/lzo: 64-bit CTZ on arm64 lib/lzo: tidy-up ifdefs ipc/sem.c: replace kvmalloc/memset with kvzalloc and use struct_size ipc: annotate implicit fall through ...
-
Brajeswar Ghosh authored
Remove duplicate headers which are included more than once Link: http://lkml.kernel.org/r/20190114170033.GA3674@hp-pavilion-15-notebook-pc-brajeswarSigned-off-by:
Brajeswar Ghosh <brajeswar.linux@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
YueHaibing authored
Remove duplicated include. Link: http://lkml.kernel.org/r/20181209062952.17736-1-yuehaibing@huawei.comSigned-off-by:
YueHaibing <yuehaibing@huawei.com> Reviewed-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
Luc Van Oostenryck authored
The percpu member of this structure is declared as: struct ... ** __percpu member; So its type is: __percpu pointer to pointer to struct ... But looking at how it's used, its type should be: pointer to __percpu pointer to struct ... and it should thus be declared as: struct ... * __percpu *member; So fix the placement of '__percpu' in the definition of this structures. This silents a few Sparse's warnings like: warning: incorrect type in initializer (different address spaces) expected void const [noderef] <asn:3> *__vpp_verify got struct sched_domain ** Link: http://lkml.kernel.org/r/20190118144902.79065-1-luc.vanoostenryck@gmail.com Fixes: 017c59c0 ("relay: Use per CPU constructs for the relay channel buffer pointers") Signed-off-by:
Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Cc: Jens Axboe <axboe@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Sabyasachi Gupta authored
Remove linux/ptrace.h which is included more than once Link: http://lkml.kernel.org/r/5c45d345.1c69fb81.d90ed.8e05@mx.google.comSigned-off-by:
Sabyasachi Gupta <sabyasachi.linux@gmail.com> Cc: Ley Foon Tan <lftan@altera.com> Signed-off-by:
-
Geert Uytterhoeven authored
Since commit ad67b74d ("printk: hash addresses printed with %p"), the virtual memory layout printed during boot up contains "ptrval" instead of actual addresses. Instead of changing the printing to "%px", and leaking virtual memory layout information again, just remove the printing completely, cfr. e.g. commits 071929db ("arm64: Stop printing the virtual memory layout") and 31833332 ("m68k/mm: Stop printing the virtual memory layout"). All interesting information (actual section sizes) is already printed by mem_init_print_info() just above anyway. Link: http://lkml.kernel.org/r/20190121152254.29079-1-geert+renesas@glider.beSigned-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
Kees Cook <keescook@chromium.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Signed-off-by:
-
Jann Horn authored
The entry for GTA02 never had paths listed; fix that. commit 9d76295a ("[ARM] GTA02/FreeRunner: Add machine definition"), which added the entry for GTA02, created two new files named arch/arm/mach-s3c2442/{include/mach/gta02.h,mach-gta02.c}, which were then renamed in commit dd6f01b5 ("ARM: S3C2440: move mach-s3c2440/* into mach-s3c24xx/") to arch/arm/mach-s3c24xx/{include/mach/gta02.h,mach-gta02.c}. Also, the GTA02 maintainer's email address is from a domain that doesn't have an MX record anymore and appears to have expired. Remove the maintainer and mark the subsystem as orphan. Link: http://lkml.kernel.org/r/20190215140444.37060-1-jannh@google.comSigned-off-by:
Jann Horn <jannh@google.com> Cc: Nelson Castillo <arhuaco@freaks-unidos.net> Cc: Nelson Castillo <nelsoneci@gmail.com> Cc: Andy Green <andy@warmcat.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Souptick Joarder authored
Page fault handlers are supposed to return VM_FAULT codes, but some drivers/file systems mistakenly return error numbers. Now that all drivers/file systems have been converted to use the vm_fault_t return type, change the type definition to no longer be compatible with 'int'. By making it an unsigned int, the function prototype becomes incompatible with a function which returns int. Sparse will detect any attempts to return a value which is not a VM_FAULT code. VM_FAULT_SET_HINDEX and VM_FAULT_GET_HINDEX values are changed to avoid conflict with other VM_FAULT codes. [jrdr.linux@gmail.com: fix warnings] Link: http://lkml.kernel.org/r/20190109183742.GA24326@jordon-HP-15-Notebook-PC Link: http://lkml.kernel.org/r/20190108183041.GA12137@jordon-HP-15-Notebook-PCSigned-off-by:
Souptick Joarder <jrdr.linux@gmail.com> Reviewed-by:
William Kucharski <william.kucharski@oracle.com> Reviewed-by:
Mike Rapoport <rppt@linux.ibm.com> Reviewed-by:
Matthew Wilcox <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by:
-
Mike Rapoport authored
arm, s390 and unicore32 use oneliner wrappers for memblock_alloc(). Replace their usage with direct call to memblock_alloc(). Link: http://lkml.kernel.org/r/1546248566-14910-7-git-send-email-rppt@linux.ibm.comSigned-off-by:
Christoph Hellwig <hch@infradead.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Greentime Hu <green.hu@gmail.com> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Paul Mackerras <paulus@samba.org> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by:
-
Mike Rapoport authored
There are several early memory allocations in arch/ code that use memblock_phys_alloc() to allocate memory, convert the returned physical address to the virtual address and then set the allocated memory to zero. Exactly the same behaviour can be achieved simply by calling memblock_alloc(): it allocates the memory in the same way as memblock_phys_alloc(), then it performs the phys_to_virt() conversion and clears the allocated memory. Replace the longer sequence with a simpler call to memblock_alloc(). Link: http://lkml.kernel.org/r/1546248566-14910-6-git-send-email-rppt@linux.ibm.comSigned-off-by:
-
Mike Rapoport authored
The pte_alloc_one_kernel() function allocates a page using __get_free_page(GFP_KERNEL) when mm initialization is complete and memblock_phys_alloc() on the earlier stages. The physical address of the page allocated with memblock_phys_alloc() is converted to the virtual address and in the both cases the allocated page is cleared using clear_page(). The code is simplified by replacing __get_free_page() with get_zeroed_page() and by replacing memblock_phys_alloc() with memblock_alloc(). Link: http://lkml.kernel.org/r/1546248566-14910-5-git-send-email-rppt@linux.ibm.comSigned-off-by:
Stafford Horne <shorne@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Greentime Hu <green.hu@gmail.com> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Paul Mackerras <paulus@samba.org> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by:
-
Mike Rapoport authored
Rather than use the memblock_alloc_base that returns a physical address and then convert this address to the virtual one, use appropriate memblock function that returns a virtual address. There is a small functional change in the allocation of then NODE_DATA(). Instead of panicing if the local allocation failed, the non-local allocation attempt will be made. Link: http://lkml.kernel.org/r/1546248566-14910-4-git-send-email-rppt@linux.ibm.comSigned-off-by:
-
Mike Rapoport authored
Rather than use the memblock_alloc_base that returns a physical address and then convert this address to the virtual one, use appropriate memblock function that returns a virtual address. Link: http://lkml.kernel.org/r/1546248566-14910-3-git-send-email-rppt@linux.ibm.comSigned-off-by:
Michal Simek <michal.simek@xilinx.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Greentime Hu <green.hu@gmail.com> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Paul Mackerras <paulus@samba.org> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by:
-
Mike Rapoport authored
Patch series "memblock: simplify several early memory allocation", v4. These patches simplify some of the early memory allocations by replacing usage of older memblock APIs with newer and shinier ones. Quite a few places in the arch/ code allocated memory using a memblock API that returns a physical address of the allocated area, then converted this physical address to a virtual one and then used memset(0) to clear the allocated range. More recent memblock APIs do all the three steps in one call and their usage simplifies the code. It's important to note that regardless of API used, the core allocation is nearly identical for any set of memblock allocators: first it tries to find a free memory with all the constraints specified by the caller and then falls back to the allocation with some or all constraints disabled. The first three patches perform the conversion of call sites that have exact requirements for the node and the possible memory range. The fourth patch is a bit one-off as it simplifies openrisc's implementation of pte_alloc_one_kernel(), and not only the memblock usage. The fifth patch takes care of simpler cases when the allocation can be satisfied with a simple call to memblock_alloc(). The sixth patch removes one-liner wrappers for memblock_alloc on arm and unicore32, as suggested by Christoph. This patch (of 6): There are a several places that allocate memory using memblock APIs that return a physical address, convert the returned address to the virtual address and frequently also memset(0) the allocated range. Update these places to use memblock allocators already returning a virtual address. Use memblock functions that clear the allocated memory instead of calling memset(0) where appropriate. The calls to memblock_alloc_base() that were not followed by memset(0) are replaced with memblock_alloc_try_nid_raw(). Since the latter does not panic() when the allocation fails, the appropriate panic() calls are added to the call sites. Link: http://lkml.kernel.org/r/1546248566-14910-2-git-send-email-rppt@linux.ibm.comSigned-off-by:
-
Dave Rodgman authored
To prevent any issues with persistent data, separate lzo-rle from lzo so that it is treated as a separate algorithm, and lzo is still available. Link: http://lkml.kernel.org/r/20190205155944.16007-3-dave.rodgman@arm.comSigned-off-by:
Dave Rodgman <dave.rodgman@arm.com> Cc: David S. Miller <davem@davemloft.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Markus F.X.J. Oberhumer <markus@oberhumer.com> Cc: Matt Sealey <matt.sealey@arm.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <nitingupta910@gmail.com> Cc: Richard Purdie <rpurdie@openedhand.com> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: Sonny Rao <sonnyrao@google.com> Signed-off-by:
-
Dave Rodgman authored
Patch series "lib/lzo: run-length encoding support", v5. Following on from the previous lzo-rle patchset: https://lkml.org/lkml/2018/11/30/972 This patchset contains only the RLE patches, and should be applied on top of the non-RLE patches ( https://lkml.org/lkml/2019/2/5/366 ). Previously, some questions were raised around the RLE patches. I've done some additional benchmarking to answer these questions. In short: - RLE offers significant additional performance (data-dependent) - I didn't measure any regressions that were clearly outside the noise One concern with this patchset was around performance - specifically, measuring RLE impact separately from Matt Sealey's patches (CTZ & fast copy). I have done some additional benchmarking which I hope clarifies the benefits of each part of the patchset. Firstly, I've captured some memory via /dev/fmem from a Chromebook with many tabs open which is starting to swap, and then split this into 4178 4k pages. I've excluded the all-zero pages (as zram does), and also the no-zero pages (which won't tell us anything about RLE performance). This should give a realistic test dataset for zram. What I found was that the data is VERY bimodal: 44% of pages in this dataset contain 5% or fewer zeros, and 44% contain over 90% zeros (30% if you include the no-zero pages). This supports the idea of special-casing zeros in zram. Next, I've benchmarked four variants of lzo on these pages (on 64-bit Arm at max frequency): baseline LZO; baseline + Matt Sealey's patches (aka MS); baseline + RLE only; baseline + MS + RLE. Numbers are for weighted roundtrip throughput (the weighting reflects that zram does more compression than decompression). https://drive.google.com/file/d/1VLtLjRVxgUNuWFOxaGPwJYhl_hMQXpHe/view?usp=sharing Matt's patches help in all cases for Arm (and no effect on Intel), as expected. RLE also behaves as expected: with few zeros present, it makes no difference; above ~75%, it gives a good improvement (50 - 300 MB/s on top of the benefit from Matt's patches). Best performance is seen with both MS and RLE patches. Finally, I have benchmarked the same dataset on an x86-64 device. Here, the MS patches make no difference (as expected); RLE helps, similarly as on Arm. There were no definite regressions; allowing for observational error, 0.1% (3/4178) of cases had a regression > 1 standard deviation, of which the largest was 4.6% (1.2 standard deviations). I think this is probably within the noise. https://drive.google.com/file/d/1xCUVwmiGD0heEMx5gcVEmLBI4eLaageV/view?usp=sharing One point to note is that the graphs show RLE appears to help very slightly with no zeros present! This is because the extra code causes the clang optimiser to change code layout in a way that happens to have a significant benefit. Taking baseline LZO and adding a do-nothing line like "__builtin_prefetch(out_len);" immediately before the "goto next" has the same effect. So this is a real, but basically spurious effect - it's small enough not to upset the overall findings. This patch (of 3): When using zram, we frequently encounter long runs of zero bytes. This adds a special case which identifies runs of zeros and encodes them using run-length encoding. This is faster for both compression and decompresion. For high-entropy data which doesn't hit this case, impact is minimal. Compression ratio is within a few percent in all cases. This modifies the bitstream in a way which is backwards compatible (i.e., we can decompress old bitstreams, but old versions of lzo cannot decompress new bitstreams). Link: http://lkml.kernel.org/r/20190205155944.16007-2-dave.rodgman@arm.comSigned-off-by:
-
Matt Sealey authored
Enable faster 8-byte copies on arm64. Link: http://lkml.kernel.org/r/20181127161913.23863-6-dave.rodgman@arm.com Link: http://lkml.kernel.org/r/20190205141950.9058-4-dave.rodgman@arm.comSigned-off-by:
Matt Sealey <matt.sealey@arm.com> Signed-off-by:
-
Matt Sealey authored
LZO leaves some performance on the table by not realising that arm64 can optimize count-trailing-zeros bit operations. Add CONFIG_ARM64 to the checked definitions alongside CONFIG_X86_64 to enable the use of rbit/clz instructions on full 64-bit quantities. Link: http://lkml.kernel.org/r/20181127161913.23863-5-dave.rodgman@arm.com Link: http://lkml.kernel.org/r/20190205141950.9058-3-dave.rodgman@arm.comSigned-off-by:
-
