This patch adds a mixer control for the STAC92XX boards to control the
DC bias of mic ports, allowing recording from both powered and
non-powered sources.  It replaces the "Mic Output Switch" with "Mic Jack
Mode" to switch between Mic, Line In, and Line Out.
Signed-off-by: Nickolas Lloyd <ultrageek.lloyd@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Added the codec SSID for MacBook Pro 5,1 as compatible as MP51.
However, the headphone auto-muting function doesn't work.  So,
this is just a tentative solution.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The model=acer for ALC883/889 doesn't work well for the recent Acer
Aspire laptops.  Since model=auto works better nowadays, it's safer
to use the default fallback instead of the Acer specific one.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Add specific configuration for Samsung NC10 mini notebook.  Internal
mic/speakers will be correctly muted when plugging in external ones.
Mixer controls are added for speakers, headphones and PC beep.
"Boost" is added for the microphones.
Signed-off-by: Chris Pockelé <chris.pockele.f1@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Added the missing descriptions and the model names for Realtek codecs
to the documentation and the config table.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Most of unsol handlers defined in patch_realtek.c can be classified to
two types, mute via amp of pins and mute via ctl bits of pins.
Thus there are a big room to generalize each implementation.

This patch creates two generic functions, alc_automute_amp() and
alc_automute_pin().  The latter is actually changed from the previous
alc_sku_automute().  Each caller needs to initialize hp_pins and
speaker_pins properly at own init_hook.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Just clean up, no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The speaker auto-muting per HP plugging for ALC262 HIPPO and compatible
devices is slightly buggy as the "Master" or "Front" mixer control can
still toggle the speaker output even if the headphone is plugged.

This patch fixes the issue, and clean up the hippo-related codes
together with fixes of some inconsistent mixer names.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

VIA VT1708S and VT1702 codecs can have two SPDIF outputs.  One of them
should have been handled as the extra digital out, but it's not
properly accessed.

This patch fixes the handling of the secondary SPDIF on these codecs
with the slave dig-out as found in patch_sigmatel.c.  This makes the
use of such a device easier (for normal users).
Signed-off-by: Takashi Iwai <tiwai@suse.de>

BIOS on Mac Mini Core2 Duo sets both INPUT and OUTPUT pinctl bits to
the line-in jack, and it confuses the driver as if it's a valid input.
This patch adds the check of OUTPUT bit so that the driver fixes the
invalid pin setup.
Tested-by: Tino Keitel <tino.keitel@gmx.de>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Signed-off-by: Kacper Szczesniak <kacper@qwe.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Signed-off-by: James Gardiner <renidragsemaj@yahoo.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The commmit dfed0ef9 was reverted
accidentally by the merge of auto-detection fix patch.

Fixed again now.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Enable auto-muting in model=auto only for devices with HP and speakers.
For devices with HP and line-outs, don't enable the auto-muting.

Also, add a debug print to show the auto-mute feature.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

In the realtek auto-probing mode, the initialization of amp with
some magic COEF or EAPD verbs is applied only when the codec SSID
has valid values to satisfy the realtek's definition.
However, many devices don't provide in that way, thus the device
doesn't work as is.

This patch allows the same initialization code even if the SSID
doesn't pass the bit test.  Also, alc_subsystem_id() is changed
just to check and define the type, so that it's called in the
parser, instead of the initializer.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The current ad1884a-mobile model has a problem that the speaker output
doesn't work sometimes after boot or power-saving on some HP laptops.
It seems that the verbs accessing to the non-functional widgets cause
this problem.

This patch simplifies the init verbs for mobile model not to touch
unnecessary setups so that it avoids the speaker-mute problem.

Reference: Novell bnc#495668
	https://bugzilla.novell.com/show_bug.cgi?id=495668Signed-off-by: Takashi Iwai <tiwai@suse.de>

Added a quirk (model=m51va) for Packard Bell RS65 with ALC663.

Reference: Novell bnc#496787
	https://bugzilla.novell.com/show_bug.cgi?id=496787Signed-off-by: Takashi Iwai <tiwai@suse.de>

The NID and ASS numbers were swapped...
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Check the target power-state before checking EAPD exception to reduce
unneeded verb executions.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Added a couple of debug prints to show the checked id numbers in
alc_subsystem_id().
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The current error-recovery scheme for the codec communication errors
doesn't work always well.  Especially falling back to the
single-command mode causes the fatal problem on many systems.

In this patch, the problematic verb is re-issued again after the error
(even with polling mode) instead of the single-cmd mode.  The
single-cmd mode will be used only when specified via the command
option explicitly, mainly just for testing.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Cache quries for PCM and STREAM parameters as well as ampcap and
pincap sharing the hash table.  This will reduce the superfluous
access of the same codec verbs.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

- Support ASUS F81Se F5Q P80 U20A U80 U50 UX50 for ALC269
- Support ASUS F70SL UX20 X58LE F50Z N80Vc N81Te N505Tp Vx3V N5051A
  for ALC663
- Support DELL ZM1 for ALC272
Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Don't unmute unneeded amps for input mixers of ALC662 & co.
It caused possible recording noises.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Use the new function to reduce the access and allow the user setup
via sysfs, too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Added the missing definition of max channels for CA0110, which resulted
in an error at opening PCM devices.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

(Re)set function_id only from the value on FG nodes.
The current code overrides the value with the last widget.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Add the upper-limit of mixer amp for AD1884A-laptop model just like
the mobile model for some HP laptops.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

When the headphone can have no unique DAC, the current code doesn't
check the HP-detection although it should.  Put the hp-detection check
before the DAC check to fix this bug.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Check the length to copy via strlen() beforehand to avoid the stack
corruption, or use strlcpy() to be safe in HD-audio codes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Added the support for Creative SB X-Fi boards with UAA (HD-audio) mode.
In the HD-audio mode, no multiple streams are supported by just it
behaves like a normal HD-audio device.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Commit fa00e046
added a new bitfield not adjacent to other
bitfields in the same struct.  Moved the new one.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: hda - Fix the cmd cache keys for amp verbs
  ALSA: add missing definitions(letters) to HD-Audio.txt
  ALSA: hda - Add quirk mask for Fujitsu Amilo laptops with ALC883
  [ALSA] intel8x0: add one retry to the ac97_clock measurement routine
  [ALSA] intel8x0: fix wrong conditions in ac97_clock measure routine
  ALSA: hda - Avoid call of snd_jack_report at release
  ALSA: add private_data to struct snd_jack
  ALSA: snd-usb-caiaq: rename files to remove redundant information in file pathes
  ALSA: snd-usb-caiaq: clean up header includes
  ALSA: sound/pci: use memdup_user()
  ALSA: sound/usb: use memdup_user()
  ALSA: sound/isa: use memdup_user()
  ALSA: sound/core: use memdup_user()
  [ALSA] intel8x0: do not use zero value from PICB register
  [ALSA] intel8x0: an attempt to make ac97_clock measurement more reliable
  [ALSA] pcm-midlevel: Add more strict buffer position checks based on jiffies
  [ALSA] hda_intel: fix unexpected ring buffer positions
  ASoC: Disable S3C64xx support in Kconfig
  ASoC: magician: remove un-necessary #include of pxa-regs.h and hardware.h