Signed-off-by: Allen Pais <allen.lkml@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

If the algorithm we're parallelizing is asynchronous we might change
CPUs between padata_do_parallel() and padata_do_serial(). However, we
don't expect this to happen as we need to enqueue the padata object into
the per-cpu reorder queue we took it from, i.e. the same-cpu's parallel
queue.

Ensure we're not switching CPUs for a given padata object by tracking
the CPU within the padata object. If the serial callback gets called on
the wrong CPU, defer invoking padata_reorder() via a kernel worker on
the CPU we're expected to run on.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The reorder timer function runs on the CPU where the timer interrupt was
handled which is not necessarily one of the CPUs of the 'pcpu' CPU mask
set.

Ensure the padata_reorder() callback runs on the correct CPU, which is
one in the 'pcpu' CPU mask set and, preferrably, the next expected one.
Do so by comparing the current CPU with the expected target CPU. If they
match, call padata_reorder() right away. If they differ, schedule a work
item on the target CPU that does the padata_reorder() call for us.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The parallel queue per-cpu data structure gets initialized only for CPUs
in the 'pcpu' CPU mask set. This is not sufficient as the reorder timer
may run on a different CPU and might wrongly decide it's the target CPU
for the next reorder item as per-cpu memory gets memset(0) and we might
be waiting for the first CPU in cpumask.pcpu, i.e. cpu_index 0.

Make the '__this_cpu_read(pd->pqueue->cpu_index) == next_queue->cpu_index'
compare in padata_get_next() fail in this case by initializing the
cpu_index member of all per-cpu parallel queues. Use -1 for unused ones.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

In 32-bit mode, the x86 architecture can hold full 32-bit pointers.
Therefore, the code that copies the current address to the %ecx register
and uses %ecx-relative addressing is useless, we could just use absolute
addressing.

The processors have a stack of return addresses for branch prediction. If
we use a call instruction and pop the return address, it desynchronizes
the return stack and causes branch prediction misses.

This patch also moves the data to the .rodata section.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Use the provided mechanism in dmaengine.h to invoke the
completion callback.
Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Clean up the mapped pages and the unmap object once we are done with
it. This enables the final clean-up of the object once the transfer
is complete.
Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add support to explicity ACK mailbox message
because after sending message we can know
the send status via error attribute of brcm_message.

This is needed to support "txdone_ack" supported in
mailbox controller driver.

Fixes: 9d12ba86 ("crypto: brcm - Add Broadcom SPU driver")
Signed-off-by: Raveendra Padasalagi <raveendra.padasalagi@broadcom.com>
Reviewed-by: Anup Patel <anup.patel@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Cc: stable@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Fix checkpatch.pl warnings:

WARNING: void function return statements are not generally useful
FILE: crypto/rmd128.c:218:
FILE: crypto/rmd160.c:261:
FILE: crypto/rmd256.c:233:
FILE: crypto/rmd320.c:280:
FILE: crypto/tcrypt.c:385:
FILE: drivers/crypto/ixp4xx_crypto.c:538:
FILE: drivers/crypto/marvell/cesa.c:81:
FILE: drivers/crypto/ux500/cryp/cryp_core.c:1755:
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Use PTR_ERROR_ZERO rather than if(IS_ERR(...)) + PTR_ERR.
Build successfully.
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Kfree on NULL pointer is a no-op and therefore checking is redundant.
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

kfree on NULL pointer is a no-op and therefore checking it is redundant.
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

x86_cpu_id are not supposed to change at runtime. MODULE_DEVICE_TABLE
and x86_match_cpu are working with const x86_cpu_id. So mark the
non-const x86_cpu_id structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

x86_cpu_id are not supposed to change at runtime. MODULE_DEVICE_TABLE
and x86_match_cpu are working with const x86_cpu_id. So mark the
non-const x86_cpu_id structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch improves the readability of various functions,
by replacing various void* pointers declarations with
their respective structs *. This makes it possible to go
for the eye-friendly array-indexing methods.
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

If one of the later memory allocations in rypto4xx_build_pdr()
fails: dev->pdr (and/or) dev->pdr_uinfo wouldn't be freed.

crypto4xx_build_sdr() has the same issue with dev->sdr.
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

scatter_buffer_size is always set to PPC4XX_SD_BUFFER_SIZE.
I don't think there's any point in keeping the variable
around.
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch refactors the crypto4xx_copy_pkt_to_dst() to use
scatterwalk_map_and_copy() to copy the processed data between
the crypto engine's scatter ring buffer and the destination
specified by the ablkcipher_request.

This also makes the crypto4xx_fill_one_page() function redundant.
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The crypto engine supports more than just aes-cbc. This patch
enables the remaining AES block cipher modes that pass the
testmanager's test vectors.
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch refactors and moves the dynamic_contents helper
functions into the crypto4xx_sa.h header file.

 * get_dynamic_sa_iv_size is no longer needed, as the cryptoapi
   provides the required IV size information as well.

 * refactor the function declarations to use the a pointer to the
   dynamic_sa_contents union, instead of the crypto4xx_ctx.

 * rename get_dynamic_sa_offset_key_field to get_dynamic_sa_key_field.
   It returns the pointer to the key directly.
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The driver had a union dynamic_sa_contents in place that
described the meaning of the bits in the sa_contents
variable.
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto4xx_put_pd_to_pdr() already clears the flag.
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

All function declarations are "extern" by default, there is no need to
specify it explicitly.

For C99 states in 6.2.2.5:
"If the declaration of an identifier for a function has no
storage-class specifier, its linkage is determined exactly
as if it were declared with the storage-class specifier
extern."
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The security offload function is performed by a cryptographic
engine core attached to the 128-bit PLB (processor local bus)
with builtin DMA and interrupt controllers. This, I think,
satisfies the requirement for the CRYPTO_ALG_KERN_DRIVER_ONLY
flag.
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch removes several unused code and definitons
(structs, variables, ...).
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

alg entries are only added to the list, after the registration
was successful. If the registration failed, it was never added
to the list in the first place.
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Samsung exynos PRNG driver is using crypto framework instead of
hw_random framework. So move the devicetree binding to crypto folder.
Signed-off-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

In read routiene max is always >= 4. The check whether 'max < 4' is not
necessary. Remove it.
Signed-off-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
Acked-By: Rick Altherr <raltherr@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch replace GCM IV size value by their constant name.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch replace GCM IV size value by their constant name.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch replace GCM IV size value by their constant name.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch replace GCM IV size value by their constant name.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch replace GCM IV size value by their constant name.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch replace GCM IV size value by their constant name.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch replace GCM IV size value by their constant name.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch replace GCM IV size value by their constant name.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch replace GCM IV size value by their constant name.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch replace GCM IV size value by their constant name.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Many GCM users use directly GCM IV size instead of using some constant.

This patch add all IV size constant used by GCM.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Currently, empty messages are not supported in GCM mode, hence add
a check to prevent producing incorrect results.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>