- 18 May, 2005 2 commits
-
-
Stephen Tweedie authored
Avoid console spam with ext3 aborted journal. ext3 usually reports error conditions that it detects in its environment. But when its journal gets aborted due to such errors, it can sometimes continue to report that condition forever, spamming the console to such an extent that the initial first cause of the journal abort can be lost. When the journal aborts, we put the filesystem into readonly mode. Most subsequent filesystem operations will get rejected immediately by checks for MS_RDONLY either in the filesystem or in the VFS. But some paths do not have such checks --- for example, if we continue to write to a file handle that was opened before the fs went readonly. (We only check for the ROFS condition when the file is first opened.) In these cases, we can continue to generate log errors similar to EXT3-fs error (device $DEV) in start_transaction: Journal has aborted for each subsequent write. There is really no point in generating these errors after the initial error has been fully reported. Specifically, if we're starting a completely new filesystem operation, and the filesystem is *already* readonly (ie. the ext3 layer has already detected and handled the underlying jbd abort), and we see an EROFS error, then there is simply no point in reporting it again. Signed-off-by: Stephen Tweedie <sct@redhat.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Stephen Tweedie authored
Don't pass meaningless file handles to block device ioctls. The recent raw IO ioctl-passthrough fix started passing the raw file handle into the block device ioctl handler. That's unlikely to be useful, as the file handle is actually open on a character-mode raw device, not a block device, so dereferencing it is not going to yield useful results to a block device ioctl handler. Previously we just passed NULL; also not a value that can usefully be dereferenced, but at least if it does happen, we'll oops instead of silently pretending that the file is a block device, so NULL is the more defensive option here. This patch reverts to that behaviour. Noticed by Al Viro. Signed-off-by: Stephen Tweedie <sct@redhat.com> Acked-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
- 17 May, 2005 38 commits
-
-
Greg KH authored
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Greg KH authored
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Scott Murray authored
If my CPCI hotplug update patch is applied, then there are no longer any in tree users of the pci_visit_dev API, and it and its related code can be removed. Signed-off-by: Scott Murray <scottm@somanetworks.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Scott Murray authored
[PATCH] CPCI: update I have finally done some work to update the CompactPCI hotplug driver to fix some of the outstanding issues in 2.6: - Added adapter and latch status ops so that those files will get created by the current PCI hotplug core. This used to not be required, but seems to be now after some of the sysfs rework in the core. - Replaced slot list spinlock with a r/w semaphore to avoid any potential issues with sleeping. This quiets all of the runtime warnings. - Reworked interrupt driven hot extraction handling to remove need for a polling operator for ENUM# status. There are a lot of boards that only have an interrupt driven by ENUM#, so this lowers the bar to entry. - Replaced pci_visit_dev usage with better use of the PCI core functions. The new code is functionally equivalent to the previous code, but the use of pci_enable_device on insert needs to be investigated further, as I need to do some more testing to see if it is still necessary. Signed-off-by: Scott Murray <scottm@somanetworks.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Dely Sy authored
Here is the updated patch to get pciehp driver to work for downstream port of a switch and handle the difference in the offset value of PCI Express capability list item of different ports. Signed-off-by: Dely Sy <dely.l.sy@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Dely Sy authored
Here is a patch to fix the problem of echoing 1 to "power" file to enabled slot causing the slot to power down, and echoing 0 to disabled slot causing shpchp_disabled_slot() to be called twice. This problem was reported by kenji Kaneshige. Thanks, Dely Signed-off-by: Dely Sy <dely.l.sy@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Christoph Lameter authored
The GET_INDEX() macro should use just the low three bits of the devfn, otherwise we have a memory scribble in pcie_rootport_aspm_quirk that overwrites ptype_all Fix it to be more careful about its arguments while at it. Acked by Dely Sy <dely.l.sy@intel.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
randy_dunlap authored
free agent Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Paul Mackerras authored
We need to call parse_early_param() early on to allow usage of early_param() for command line parsing. Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
-
Johannes Stezenbach authored
- remove enable_ci, ci interface is assumed to be present if the saa7113 is not found. - reduce the delay when checking for saa7113 - clean up the cam reset according to specifications - turn off Vcc to the cam slot if cam is removed or fails reset - remove cam reset in ciintf_init - clean up printks (KERN_) - move gpio setting into saa7113_init - clean up unreadable frontend_init (Kenneth Aafloy) Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Johannes Stezenbach authored
whitespace cleanup Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Johannes Stezenbach authored
fixed CI debug output (Dominique Dumont) Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Johannes Stezenbach authored
fix a bug in the module parameter (Dominique Dumont) Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Johannes Stezenbach authored
updated documentation (Manu Abraham) Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Johannes Stezenbach authored
removed unused module parameter session removed unnecesary delay for FTA cards (Manu Abraham) Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Johannes Stezenbach authored
fix for descrambling failure (Dominique Dumont, Manu Abraham) Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Johannes Stezenbach authored
fixed a tuning problem for cards based on the old firmware (Steffen Motzer, Manu Abraham) Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Johannes Stezenbach authored
add support for the old Twinhan 200103A card (Steffen Motzer) Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Johannes Stezenbach authored
- reorganize Twinhan DST driver to support CI - add support for more cards (Manu Abraham) Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Johannes Stezenbach authored
update bt8xx documentation (Uwe Bugla) Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Johannes Stezenbach authored
Modified dvb_register_adapter() to avoid kmalloc/kfree. Drivers have to embed struct dvb_adapter into their private data struct from now on. (Andreas Oberritter) Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Johannes Stezenbach authored
misc. minor cleanups, select FW_LOADER and add a help text to DVB_OR51132 Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Johannes Stezenbach authored
- make needlessly global code static - #if 0 the following unused global functions: - ttpci/av7110_hw.c: av7110_reset_arm - ttpci/av7110_hw.c: av7110_send_ci_cmd - frontends/mt352.[ch]: drop mt352_read Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Johannes Stezenbach authored
added missing #ifndef and #define to inhibit multiple inclusions (Patrick Boettcher) Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Johannes Stezenbach authored
added support for different tda10046 firmware versions. tested with v20, v21 and v25. (Andreas Oberritter) Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Johannes Stezenbach authored
allow N_I2C to be overridden by the card driver (Andreas Oberritter) Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Johannes Stezenbach authored
use simple u8 instead of bitfields (Andreas Oberritter) Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Johannes Stezenbach authored
copying the mt352_config-struct to mt352_state instead of storing just the pointer to it (Patrick Boettcher) Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Johannes Stezenbach authored
remove unnecessary msleep(10) in writereg (Tony Glader) Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Johannes Stezenbach authored
prevent NULL pointer related Oopses (Patrick Boettcher) Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Johannes Stezenbach authored
remove unnecessary casts in frontends (Kenneth Aafloy) Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Johannes Stezenbach authored
fix the current stv0299 code that handles FE_DISHNETWORK_SEND_LEGACY_CMD. (supports the legacy SW21, SW44, and SW64 switches) Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Johannes Stezenbach authored
mostly formatting cleanups, no functional change (Andreas Oberritter) Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Johannes Stezenbach authored
add support for read_ber, read_signal_strength and read_status (Greg Wickham) Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Johannes Stezenbach authored
fix indentation Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-