- 09 Jan, 2012 13 commits
-
-
Paul Gortmaker authored
Delete any instances of include module.h that were not strictly required. In the case of ext2, the declaration of MODULE_LICENSE etc. were in inode.c but the module_init/exit were in super.c, so relocate the MODULE_LICENCE/AUTHOR block to super.c which makes it consistent with ext3 and ext4 at the same time. Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by:
Jan Kara <jack@suse.cz>
-
Djalal Harouni authored
The EXT{3,4}_IOC_SETVERSION ioctl() updates i_ctime and i_generation without i_mutex. This can lead to a race with the other operations that update i_ctime. This is not a big issue but let's make the ioctl consistent with how we handle e.g. other timestamp updates and use i_mutex to protect inode changes. Signed-off-by:Djalal Harouni <tixxdz@opendz.org> Signed-off-by:
-
Jan Kara authored
When we hit EIO while writing LVID, the buffer uptodate bit is cleared. This then results in an anoying warning from mark_buffer_dirty() when we write the buffer again. So just set uptodate flag unconditionally. Reviewed-by:
Namjae Jeon <linkinjeon@gmail.com> Signed-off-by:
-
Jan Kara authored
WARN_ON_ONCE(IS_RDONLY(inode)) tends to trip when filesystem hits error and is remounted read-only. This unnecessarily scares users (well, they should be scared because of filesystem error, but the stack trace distracts them from the right source of their fear ;-). We could as well just remove the WARN_ON but it's not hard to fix it to not trip on filesystem with errors and not use more cycles in the common case so that's what we do. CC: stable@kernel.org Signed-off-by: -
Jan Kara authored
j_barrier mutex is used for serializing different journal lock operations. The problem with it is that e.g. FIFREEZE ioctl results in process leaving kernel with j_barrier mutex held which makes lockdep freak out. Also hibernation code wants to freeze filesystem but it cannot do so because it then cannot hibernate the system because of mutex being locked. So we remove j_barrier mutex and use direct wait on j_barrier_count instead. Since locking journal is a rare operation we don't have to care about fairness or such things. CC: Andrew Morton <akpm@linux-foundation.org> Acked-by:
Joel Becker <jlbec@evilplan.org> Signed-off-by:
-
Jeff Mahoney authored
This patch fixes a crash in reiserfs_delete_xattrs during umount. When shrink_dcache_for_umount clears the dcache from generic_shutdown_super, delayed evictions are forced to disk. If an evicted inode has extended attributes associated with it, it will need to walk the xattr tree to locate and remove them. But since shrink_dcache_for_umount will BUG if it encounters active dentries, the xattr tree must be released before it's called or it will crash during every umount. This patch forces the evictions to occur before generic_shutdown_super by calling shrink_dcache_sb first. The additional evictions caused by the removal of each associated xattr file and dir will be automatically handled as they're added to the LRU list. CC: reiserfs-devel@vger.kernel.org CC: stable@kernel.org Signed-off-by:
Jeff Mahoney <jeffm@suse.com> Signed-off-by:
-
Jan Kara authored
When jqfmt mount option is not specified on remount, we mistakenly clear s_jquota_fmt value stored in superblock. Fix the problem. CC: stable@kernel.org CC: reiserfs-devel@vger.kernel.org Signed-off-by: -
Jan Kara authored
Currently, we ignore symlink component of type 2. But mkisofs and other OS' seem to treat it as / so do the same for compatibility. Reported-by:
"Gábor S." <otnaccess@hotmail.com> Signed-off-by:
-
Jan Kara authored
During BKL removal in 2.6.38, conversion of files from in-ICB format to normal format got broken. We call ->writepage with i_data_sem held but udf_get_block() also acquires i_data_sem thus creating A-A deadlock. We fix the problem by dropping i_data_sem before calling ->writepage() which is safe since i_mutex still protects us against any changes in the file. Also fix pagelock - i_data_sem lock inversion in udf_expand_file_adinicb() by dropping i_data_sem before calling find_or_create_page(). CC: stable@kernel.org Reported-by:
Matthias Matiak <netzpython@mail-on.us> Tested-by:
-
Jan Kara authored
inode_getblk() always returned NULL and passed results in its parameters. Make the function return something useful - found block number. Signed-off-by: -
Jan Kara authored
When insert_inode_locked() fails in ext2_new_inode() it most likely means inode bitmap got corrupted and we allocated again inode which is already in use. Also doing unlock_new_inode() during error recovery is wrong since the inode does not have I_NEW set. Fix the problem by informing about filesystem error and jumping to fail: (instead of fail_drop:) which doesn't call unlock_new_inode(). Reviewed-by:
Eric Sandeen <sandeen@redhat.com> Signed-off-by:
-
Jan Kara authored
When insert_inode_locked() fails in ext3_new_inode() it most likely means inode bitmap got corrupted and we allocated again inode which is already in use. Also doing unlock_new_inode() during error recovery is wrong since inode does not have I_NEW set. Fix the problem by jumping to fail: (instead of fail_drop:) which declares filesystem error and does not call unlock_new_inode(). Reviewed-by:
-
Zheng Liu authored
ll_rw_block() is deprecated. Thus we replace it with other functions. CC: Jan Kara <jack@suse.cz> Signed-off-by:
Zheng Liu <wenqing.lz@taobao.com> Signed-off-by:
-
- 22 Nov, 2011 2 commits
-
-
Dan Carpenter authored
This is an fsfuzzer bug. ->s_journal is set at the end of ext3_load_journal() but we try to use it in the error handling from ext3_get_journal() while it's still NULL. [ 337.039041] BUG: unable to handle kernel NULL pointer dereference at 0000000000000024 [ 337.040380] IP: [<ffffffff816e6539>] _raw_spin_lock+0x9/0x30 [ 337.041687] PGD 0 [ 337.043118] Oops: 0002 [#1] SMP [ 337.044483] CPU 3 [ 337.044495] Modules linked in: ecb md4 cifs fuse kvm_intel kvm brcmsmac brcmutil crc8 cordic r8169 [last unloaded: scsi_wait_scan] [ 337.047633] [ 337.049259] Pid: 8308, comm: mount Not tainted 3.2.0-rc2-next-20111121+ #24 SAMSUNG ELECTRONICS CO., LTD. RV411/RV511/E3511/S3511 /RV411/RV511/E3511/S3511 [ 337.051064] RIP: 0010:[<ffffffff816e6539>] [<ffffffff816e6539>] _raw_spin_lock+0x9/0x30 [ 337.052879] RSP: 0018:ffff8800b1d11ae8 EFLAGS: 00010282 [ 337.054668] RAX: 0000000000000100 RBX: 0000000000000000 RCX: ffff8800b77c2000 [ 337.056400] RDX: ffff8800a97b5c00 RSI: 0000000000000000 RDI: 0000000000000024 [ 337.058099] RBP: ffff8800b1d11ae8 R08: 6000000000000000 R09: e018000000000000 [ 337.059841] R10: ff67366cc2607c03 R11: 00000000110688e6 R12: 0000000000000000 [ 337.061607] R13: 0000000000000000 R14: 0000000000000000 R15: ffff8800a78f06e8 [ 337.063385] FS: 00007f9d95652800(0000) GS:ffff8800b7180000(0000) knlGS:0000000000000000 [ 337.065110] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 337.066801] CR2: 0000000000000024 CR3: 00000000aef2c000 CR4: 00000000000006e0 [ 337.068581] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 337.070321] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 337.072105] Process mount (pid: 8308, threadinfo ffff8800b1d10000, task ffff8800b1d02be0) [ 337.073800] Stack: [ 337.075487] ffff8800b1d11b08 ffffffff811f48cf ffff88007ac9b158 0000000000000000 [ 337.077255] ffff8800b1d11b38 ffffffff8119405d ffff88007ac9b158 ffff88007ac9b250 [ 337.078851] ffffffff8181bda0 ffffffff8181bda0 ffff8800b1d11b68 ffffffff81131e31 [ 337.080284] Call Trace: [ 337.081706] [<ffffffff811f48cf>] log_start_commit+0x1f/0x40 [ 337.083107] [<ffffffff8119405d>] ext3_evict_inode+0x1fd/0x2a0 [ 337.084490] [<ffffffff81131e31>] evict+0xa1/0x1a0 [ 337.085857] [<ffffffff81132031>] iput+0x101/0x210 [ 337.087220] [<ffffffff811339d1>] iget_failed+0x21/0x30 [ 337.088581] [<ffffffff811905fc>] ext3_iget+0x15c/0x450 [ 337.089936] [<ffffffff8118b0c1>] ? ext3_rsv_window_add+0x81/0x100 [ 337.091284] [<ffffffff816df9a4>] ext3_get_journal+0x15/0xde [ 337.092641] [<ffffffff811a2e9b>] ext3_fill_super+0xf2b/0x1c30 [ 337.093991] [<ffffffff810ddf7d>] ? register_shrinker+0x4d/0x60 [ 337.095332] [<ffffffff8111c112>] mount_bdev+0x1a2/0x1e0 [ 337.096680] [<ffffffff811a1f70>] ? ext3_setup_super+0x210/0x210 [ 337.098026] [<ffffffff8119a770>] ext3_mount+0x10/0x20 [ 337.099362] [<ffffffff8111cbee>] mount_fs+0x3e/0x1b0 [ 337.100759] [<ffffffff810eda1b>] ? __alloc_percpu+0xb/0x10 [ 337.102330] [<ffffffff81135385>] vfs_kern_mount+0x65/0xc0 [ 337.103889] [<ffffffff8113611f>] do_kern_mount+0x4f/0x100 [ 337.105442] [<ffffffff811378fc>] do_mount+0x19c/0x890 [ 337.106989] [<ffffffff810e8456>] ? memdup_user+0x46/0x90 [ 337.108572] [<ffffffff810e84f3>] ? strndup_user+0x53/0x70 [ 337.110114] [<ffffffff811383fb>] sys_mount+0x8b/0xe0 [ 337.111617] [<ffffffff816ed93b>] system_call_fastpath+0x16/0x1b [ 337.113133] Code: 38 c2 74 0f 66 0f 1f 44 00 00 f3 90 0f b6 03 38 c2 75 f7 48 83 c4 08 5b 5d c3 0f 1f 84 00 00 00 00 00 55 b8 00 01 00 00 48 89 e5 <f0> 66 0f c1 07 0f b6 d4 38 c2 74 0c 0f 1f 00 f3 90 0f b6 07 38 [ 337.116588] RIP [<ffffffff816e6539>] _raw_spin_lock+0x9/0x30 [ 337.118260] RSP <ffff8800b1d11ae8> [ 337.119998] CR2: 0000000000000024 [ 337.188701] ---[ end trace c36d790becac1615 ]--- Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Yongqiang Yang authored
Currently, we clear revoked flag only when a block is reused. However, this can tigger a false journal error. Consider a situation when a block is used as a meta block and is deleted(revoked) in ordered mode, then the block is allocated as a data block to a file. At this moment, user changes the file's journal mode from ordered to journaled and truncates the file. The block will be considered re-revoked by journal because it has revoked flag still pending from the last transaction and an assertion triggers. We fix the problem by keeping the revoked status more uptodate - we clear revoked flag when switching revoke tables to reflect there is no revoked buffers in current transaction any more. Signed-off-by:
Yongqiang Yang <xiaoqiangnk@gmail.com> Signed-off-by:
-
- 09 Nov, 2011 4 commits
-
-
Eryu Guan authored
Call ext3_mark_recovery_complete() in ext3_fill_super() only if needs_recovery is non-zero. Besides that, print out "recovery complete" message after calling ext3_mark_recovery_complete(). Cc: Jan Kara <jack@suse.cz> Signed-off-by:
Eryu Guan <guaneryu@gmail.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linuxLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: drivers/media: video/a5k6aa is a module and so needs module.h mfd: fix build failures in recently added ab5500 code hwspinlock/u8500: include linux/module.h MTD: MAPS: bcm963xx-flash.c: explicitly include module.h
-
git://neil.brown.name/mdLinus Torvalds authored
* 'for-linus' of git://neil.brown.name/md: md/raid5: STRIPE_ACTIVE has lock semantics, add barriers md/raid5: abort any pending parity operations when array fails.
-
git://git.kernel.org/pub/scm/linux/kernel/git/rdunlap/linux-docsLinus Torvalds authored
* 'docs-move' of git://git.kernel.org/pub/scm/linux/kernel/git/rdunlap/linux-docs: (45 commits) DocBook/drm: Clean up a todo-note DocBook/drm: `device aware' -> `device-aware' DocBook/drm: `(device|driver) specific' -> `(device|driver)-specific' DocBook/drm: Clean up the paragraph on framebuffer objects DocBook/drm: Use `; otherwise,' DocBook/drm: Better flow with `, and then' DocBook/drm: Refer to the domain-setting function as a device-specific ioctl DocBook/drm: Improve flow of GPU/CPU coherence sentence DocBook/drm: Use an <itemizelist> for fundamental GEM operations DocBook/drm: Insert a comma DocBook/drm: Use a <variablelist> for vblank ioctls DocBook/drm: Use an itemizedlist for what an encoder needs to provide DocBook/drm: Insert `the' for readability, and change `set' to `setting' DocBook/drm: Remove extraneous commas DocBook/drm: Use a colon DocBook/drm: Clarify `final initialization' via better formatting DocBook/drm: Remove redundancy DocBook/drm: Insert `it' for smooth reading DocBook/drm: The word `so-called'; I do not think it connotes what you think it connotes DocBook/drm: Use a singular subject for grammatical cleanliness ...
-
- 08 Nov, 2011 18 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktestLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest: (21 commits) ktest: Evaluate variables entered on the command line ktest: Add variable ${PWD} ktest: Add another monitor flush before installing kernel ktest: Do not opencode reboot in grub setting ktest: Add processing of complex conditionals ktest: Fix parsing of config section lines ktest: Sort make_min_config configs by dependecies ktest: Add DEFINED keyword for IF statements ktest: Add OVERRIDE keyword to DEFAULTS section ktest: Consolidate TEST_TYPE and DEFAULT code ktest: Add INCLUDE keyword to include other config files ktest: Let IF keyword take comparisons ktest: Add IF and ELSE to config sections ktest: Do not reboot on config or build issues ktest: Add option REBOOT_SUCCESS_LINE to stop waiting after a reboot ktest: Add NO_INSTALL option to not install for a test ktest: Fail when grub menu not found ktest: Include monitor in reboot code ktest: Only need to save .config when doing mrproper ktest: Create outputdir if it does not exist ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
* 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM / OPP: Use ERR_CAST instead of ERR_PTR(PTR_ERR()) PM / devfreq: fix private_data Documentation: Fix typo in freezer-subsystem.txt PM / QoS: Set cpu_dma_pm_qos->name
-
Thomas Meyer authored
Use ERR_CAST inlined function instead of ERR_PTR(PTR_ERR(...)) [The semantic patch that makes this change is available in scripts/coccinelle/api/err_cast.cocci. More information about semantic patching is available at http://coccinelle.lip6.fr/] Signed-off-by:
Thomas Meyer <thomas@m3y3r.de> Signed-off-by:
Rafael J. Wysocki <rjw@sisk.pl>
-
git://git.kernel.org/pub/scm/linux/kernel/git/ohad/hwspinlockLinus Torvalds authored
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ohad/hwspinlock: hwspinlock/u8500: fix build error due to undefined label hwspinlock: Don't return a value in __hwspin_unlock
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc: Hook up process_vm_{readv,writev} syscalls.
-
Linus Torvalds authored
The Kconfig loop detection goes crazy without this. Signed-off-by:Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Otherwise we get compile errors like this: ERROR: "led_classdev_unregister" [drivers/platform/x86/dell-laptop.ko] undefined! ERROR: "led_classdev_register" [drivers/platform/x86/dell-laptop.ko] undefined! make[1]: *** [__modpost] Error 1 make: *** [modules] Error 2 when the dell-laptop support is enabled without the necessary LED support being enabled. Reported-by:
Alessandro Suardi <alessandro.suardi@gmail.com> Acked-by:
Matthew Garrett <mjg59@srcf.ucam.org> Signed-off-by:
-
Paul Gortmaker authored
This file uses core functions like module_init() and module_exit() and so it explicitly needs to include the module.h header. Signed-off-by: -
Alan Cox authored
Alek Du reported that the code erroneously applies time to jiffies conversions twice to the t1 and t2 values. In normal use on a modem link this cases no visible problem but on a slower link it will break as with HZ=1000 as is typical we are running t1/t2 ten times too fast. Alek's original patch removed the conversion from the timer setting but we in fact have to be more careful as the contents of t1/t2 are visible via the device API and we thus need to correct the constants. Signed-off-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
-
Axel Lin authored
Fix below build error: CC drivers/hwspinlock/u8500_hsem.o drivers/hwspinlock/u8500_hsem.c: In function 'u8500_hsem_probe': drivers/hwspinlock/u8500_hsem.c:113: error: label 'free_state' used but not defined Signed-off-by:
Axel Lin <axel.lin@gmail.com> Signed-off-by:
Ohad Ben-Cohen <ohad@wizery.com>
-
Axel Lin authored
Fix below build warning: CC arch/arm/mach-omap2/hwspinlock.o In file included from arch/arm/mach-omap2/hwspinlock.c:22: include/linux/hwspinlock.h: In function '__hwspin_unlock': include/linux/hwspinlock.h:121: warning: 'return' with a value, in function returning void Signed-off-by:
-
Dan Williams authored
All updates that occur under STRIPE_ACTIVE should be globally visible when STRIPE_ACTIVE clears. test_and_set_bit() implies a barrier, but clear_bit() does not. This is suitable for 3.1-stable. Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
NeilBrown <neilb@suse.de> Cc: stable@kernel.org
-
NeilBrown authored
When the number of failed devices exceeds the allowed number we must abort any active parity operations (checks or updates) as they are no longer meaningful, and can lead to a BUG_ON in handle_parity_checks6. This bug was introduce by commit 6c0069c0 in 2.6.29. Reported-by:
Manish Katiyar <mkatiyar@gmail.com> Tested-by:
-
Paul Gortmaker authored
These files had implicit dependencies on modular support which now show up as build failures with the module cleanup work merged to mainline. Reported-by:
-
Axel Lin authored
Include module.h to fix below build error: CC drivers/hwspinlock/u8500_hsem.o drivers/hwspinlock/u8500_hsem.c:177: error: 'THIS_MODULE' undeclared here (not in a function) [...] drivers/hwspinlock/u8500_hsem.c:196: warning: type defaults to 'int' in declaration of 'MODULE_AUTHOR' drivers/hwspinlock/u8500_hsem.c:196: warning: function declaration isn't a prototype make[2]: *** [drivers/hwspinlock/u8500_hsem.o] Error 1 make[1]: *** [drivers/hwspinlock] Error 2 make: *** [drivers] Error 2 Signed-off-by:
-
Jonas Gorski authored
module.h was previously implicitly included through mtd/mtd.h. Fixes the following build failure after the module.h cleanup: CC drivers/mtd/maps/bcm963xx-flash.o drivers/mtd/maps/bcm963xx-flash.c: In function 'bcm963xx_probe': drivers/mtd/maps/bcm963xx-flash.c:208:29: error: 'THIS_MODULE' undeclared (first use in this function) [...] drivers/mtd/maps/bcm963xx-flash.c:276:1: warning: type defaults to 'int' in declaration of 'MODULE_AUTHOR' drivers/mtd/maps/bcm963xx-flash.c:276:15: warning: function declaration isn't a prototype make[7]: *** [drivers/mtd/maps/bcm963xx-flash.o] Error 1 Signed-off-by:
Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by:
-
Linus Torvalds authored
.. with new name. Because nothing says "really solid kernel release" like naming it after an extinct animal that just happened to be in the news lately.
-
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omapLinus Torvalds authored
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (31 commits) ARM: OMAP: Fix export.h or module.h includes ARM: OMAP: omap_device: Include linux/export.h ARM: OMAP2: Fix H4 matrix keyboard warning ARM: OMAP1: Remove unused omap-alsa.h ARM: OMAP1: Fix warnings about enabling 32 KiHz timer ARM: OMAP2+: timer: Remove omap_device_pm_latency ARM: OMAP2+: clock data: Remove redundant timer clkdev ARM: OMAP: Devkit8000: Remove double omap_mux_init_gpio ARM: OMAP: usb: musb: OMAP: Delete unused function MAINTAINERS: Update linux-omap git repository ARM: OMAP: change get_context_loss_count ret value to int ARM: OMAP4: hsmmc: configure SDMMC1_DR0 properly ARM: OMAP4: hsmmc: Fix Pbias configuration on regulator OFF ARM: OMAP3: hwmod: fix variant registration and remove SmartReflex from common list ARM: OMAP: I2C: Fix omap_register_i2c_bus() return value on success ARM: OMAP: dmtimer: Include linux/module.h ARM: OMAP2+: l3-noc: Include linux/module.h ARM: OMAP2+: devices: Fixes for McPDM ARM: OMAP: Fix errors and warnings when building for one board ARM: OMAP3: PM: restrict erratum i443 handling to OMAP3430 only ...
-
- 07 Nov, 2011 3 commits
-
-
Al Viro authored
Mountpoint crossing is similar to following procfs symlinks - we do not get ->d_revalidate() called for dentry we have arrived at, with unpleasant consequences for NFS4. Simple way to reproduce the problem in mainline: cat >/tmp/a.c <<'EOF' #include <unistd.h> #include <fcntl.h> #include <stdio.h> main() { struct flock fl = {.l_type = F_RDLCK, .l_whence = SEEK_SET, .l_len = 1}; if (fcntl(0, F_SETLK, &fl)) perror("setlk"); } EOF cc /tmp/a.c -o /tmp/test then on nfs4: mount --bind file1 file2 /tmp/test < file1 # ok /tmp/test < file2 # spews "setlk: No locks available"... What happens is the missing call of ->d_revalidate() after mountpoint crossing and that's where NFS4 would issue OPEN request to server. The fix is simple - treat mountpoint crossing the same way we deal with following procfs-style symlinks. I.e. set LOOKUP_JUMPED... Cc: stable@kernel.org Signed-off-by:Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Jonathan Corbet authored
The "private_date" field in struct devfreq_dev_status almost certainly wants to be "private_data"; since there are no in-tree users of this functionality, now seems like an easy time to make the fix. Signed-off-by:
Jonathan Corbet <corbet@lwn.net> Signed-off-by:
-
Rafael J. Wysocki authored
Fix a typo in Documentation/cgroups/freezer-subsystem.txt. Signed-off-by:
Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Acked-by:
Randy Dunlap <rdunlap@xenotime.net>
-
