- 12 Jul, 2013 13 commits
-
-
Hannes Frederic Sowa authored
Static routes in this case are non-expiring routes which did not get configured by autoconf or by icmpv6 redirects. To make sure we actually get an ecmp route while searching for the first one in this fib6_node's leafs, also make sure it matches the ecmp route assumptions. v2: a) Removed RTF_EXPIRE check in dst.from chain. The check of RTF_ADDRCONF already ensures that this route, even if added again without RTF_EXPIRES (in case of a RA announcement with infinite timeout), does not cause the rt6i_nsiblings logic to go wrong if a later RA updates the expiration time later. v3: a) Allow RTF_EXPIRES routes to enter the ecmp route set. We have to do so, because an pmtu event could update the RTF_EXPIRES flag and we would not count this route, if another route joins this set. We now filter only for RTF_GATEWAY|RTF_ADDRCONF|RTF_DYNAMIC, which are flags that don't get changed after rt6_info construction. Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Neil Horman authored
this bug: https://bugzilla.redhat.com/show_bug.cgi?id=951695 Reported a dma debug backtrace: WARNING: at lib/dma-debug.c:937 check_unmap+0x47d/0x930() Hardware name: To Be Filled By O.E.M. via-rhine 0000:00:12.0: DMA-API: device driver failed to check map error[device address=0x0000000075a837b2] [size=90 bytes] [mapped as single] Modules linked in: ip6_tables gspca_spca561 gspca_main videodev media snd_hda_codec_realtek snd_hda_intel i2c_viapro snd_hda_codec snd_hwdep snd_seq ppdev mperf via_rhine coretemp snd_pcm mii microcode snd_page_alloc snd_timer snd_mpu401 snd_mpu401_uart snd_rawmidi snd_seq_device snd soundcore parport_pc parport shpchp ata_generic pata_acpi radeon i2c_algo_bit drm_kms_helper ttm drm pata_via sata_via i2c_core uinput Pid: 295, comm: systemd-journal Not tainted 3.9.0-0.rc6.git2.1.fc20.x86_64 #1 Call Trace: <IRQ> [<ffffffff81068dd0>] warn_slowpath_common+0x70/0xa0 [<ffffffff81068e4c>] warn_slowpath_fmt+0x4c/0x50 [<ffffffff8137ec6d>] check_unmap+0x47d/0x930 [<ffffffff810ace9f>] ? local_clock+0x5f/0x70 [<ffffffff8137f17f>] debug_dma_unmap_page+0x5f/0x70 [<ffffffffa0225edc>] ? rhine_ack_events.isra.14+0x3c/0x50 [via_rhine] [<ffffffffa02275f8>] rhine_napipoll+0x1d8/0xd80 [via_rhine] [<ffffffff815d3d51>] ? net_rx_action+0xa1/0x380 [<ffffffff815d3e22>] net_rx_action+0x172/0x380 [<ffffffff8107345f>] __do_softirq+0xff/0x400 [<ffffffff81073925>] irq_exit+0xb5/0xc0 [<ffffffff81724cd6>] do_IRQ+0x56/0xc0 [<ffffffff81719ff2>] common_interrupt+0x72/0x72 <EOI> [<ffffffff8170ff57>] ? __slab_alloc+0x4c2/0x526 [<ffffffff811992e0>] ? mmap_region+0x2b0/0x5a0 [<ffffffff810d5807>] ? __lock_is_held+0x57/0x80 [<ffffffff811992e0>] ? mmap_region+0x2b0/0x5a0 [<ffffffff811bf1bf>] kmem_cache_alloc+0x2df/0x360 [<ffffffff811992e0>] mmap_region+0x2b0/0x5a0 [<ffffffff811998e6>] do_mmap_pgoff+0x316/0x3d0 [<ffffffff81183ca0>] vm_mmap_pgoff+0x90/0xc0 [<ffffffff81197d6c>] sys_mmap_pgoff+0x4c/0x190 [<ffffffff81367d7e>] ? trace_hardirqs_on_thunk+0x3a/0x3f [<ffffffff8101eb42>] sys_mmap+0x22/0x30 [<ffffffff81722fd9>] system_call_fastpath+0x16/0x1b Usual problem with the usual fix, add the appropriate calls to dma_mapping_error where appropriate Untested, as I don't have hardware, but its pretty straightforward Signed-off-by:
Neil Horman <nhorman@tuxdriver.com> CC: David S. Miller <davem@davemloft.net> CC: Roger Luethi <rl@hellgate.ch> Signed-off-by:
-
Neil Horman authored
Recently had this backtrace reported: WARNING: at lib/dma-debug.c:937 check_unmap+0x47d/0x930() Hardware name: System Product Name ATL1E 0000:02:00.0: DMA-API: device driver failed to check map error[device address=0x00000000cbfd1000] [size=90 bytes] [mapped as single] Modules linked in: xt_conntrack nf_conntrack ebtable_filter ebtables ip6table_filter ip6_tables snd_hda_codec_hdmi snd_hda_codec_realtek iTCO_wdt iTCO_vendor_support snd_hda_intel acpi_cpufreq mperf coretemp btrfs zlib_deflate snd_hda_codec snd_hwdep microcode raid6_pq libcrc32c snd_seq usblp serio_raw xor snd_seq_device joydev snd_pcm snd_page_alloc snd_timer snd lpc_ich i2c_i801 soundcore mfd_core atl1e asus_atk0110 ata_generic pata_acpi radeon i2c_algo_bit drm_kms_helper ttm drm i2c_core pata_marvell uinput Pid: 314, comm: systemd-journal Not tainted 3.9.0-0.rc6.git2.3.fc19.x86_64 #1 Call Trace: <IRQ> [<ffffffff81069106>] warn_slowpath_common+0x66/0x80 [<ffffffff8106916c>] warn_slowpath_fmt+0x4c/0x50 [<ffffffff8138151d>] check_unmap+0x47d/0x930 [<ffffffff810ad048>] ? sched_clock_cpu+0xa8/0x100 [<ffffffff81381a2f>] debug_dma_unmap_page+0x5f/0x70 [<ffffffff8137ce30>] ? unmap_single+0x20/0x30 [<ffffffffa01569a1>] atl1e_intr+0x3a1/0x5b0 [atl1e] [<ffffffff810d53fd>] ? trace_hardirqs_off+0xd/0x10 [<ffffffff81119636>] handle_irq_event_percpu+0x56/0x390 [<ffffffff811199ad>] handle_irq_event+0x3d/0x60 [<ffffffff8111cb6a>] handle_fasteoi_irq+0x5a/0x100 [<ffffffff8101c36f>] handle_irq+0xbf/0x150 [<ffffffff811dcb2f>] ? file_sb_list_del+0x3f/0x50 [<ffffffff81073b10>] ? irq_enter+0x50/0xa0 [<ffffffff8172738d>] do_IRQ+0x4d/0xc0 [<ffffffff811dcb2f>] ? file_sb_list_del+0x3f/0x50 [<ffffffff8171c6b2>] common_interrupt+0x72/0x72 <EOI> [<ffffffff810db5b2>] ? lock_release+0xc2/0x310 [<ffffffff8109ea04>] lg_local_unlock_cpu+0x24/0x50 [<ffffffff811dcb2f>] file_sb_list_del+0x3f/0x50 [<ffffffff811dcb6d>] fput+0x2d/0xc0 [<ffffffff811d8ea1>] filp_close+0x61/0x90 [<ffffffff811fae4d>] __close_fd+0x8d/0x150 [<ffffffff811d8ef0>] sys_close+0x20/0x50 [<ffffffff81725699>] system_call_fastpath+0x16/0x1b The usual straighforward failure to check for dma_mapping_error after a map operation is completed. This patch should fix it, the reporter wandered off after filing this bz: https://bugzilla.redhat.com/show_bug.cgi?id=954170 and I don't have hardware to test, but the fix is pretty straightforward, so I figured I'd post it for review. Signed-off-by:
-
Yuchung Cheng authored
Change snmp RETRANSFAILS stat to include timeout retransmit failures in addition to other loss recoveries. Signed-off-by:
Yuchung Cheng <ycheng@google.com> Acked-by:
Neal Cardwell <ncardwell@google.com> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
hayeswang authored
>> drivers/net/usb/r815x.c:38:16: sparse: cast to restricted __le32 >> drivers/net/usb/r815x.c:67:15: sparse: cast to restricted __le32 >> drivers/net/usb/r815x.c:69:13: sparse: incorrect type in assignment (different base types) drivers/net/usb/r815x.c:69:13: expected unsigned int [unsigned] [addressable] [assigned] [usertype] tmp drivers/net/usb/r815x.c:69:13: got restricted __le32 [usertype] <noident> Signed-off-by:
Hayes Wang <hayeswang@realtek.com> Spotted-by:
kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
-
hayeswang authored
config: make ARCH=avr32 allyesconfig drivers/net/usb/r8152.c: In function 'rtl8152_start_xmit': drivers/net/usb/r8152.c:956: warning: integer overflow in expression 955 memset(tx_desc, 0, sizeof(*tx_desc)); > 956 tx_desc->opts1 = cpu_to_le32((len & TX_LEN_MASK) | TX_FS | TX_LS); 957 tp->tx_skb = skb; Signed-off-by:
-
Sunghan Suh authored
Signed-off-by:
Sunghan Suh <sunghan.suh@samsung.com> Signed-off-by:
-
“Cosmin authored
patch found using checkpatch.pl Signed-off-by:
Cosmin Stanescu <cosmin90stanescu@gmail.com> Signed-off-by:
-
Wolfram Sang authored
Since commit ab78029e (drivers/pinctrl: grab default handles from device core), we can rely on device core for setting the default pins. Compile tested only. Acked-by: Linus Walleij <linus.walleij@linaro.org> (personally at LCE13) Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Wolfram Sang authored
Since commit ab78029e (drivers/pinctrl: grab default handles from device core), we can rely on device core for setting the default pins. Compile tested only. Acked-by: Linus Walleij <linus.walleij@linaro.org> (personally at LCE13) Signed-off-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by:
-
Wolfram Sang authored
Since commit ab78029e (drivers/pinctrl: grab default handles from device core), we can rely on device core for setting the default pins. Compile tested only. Acked-by: Linus Walleij <linus.walleij@linaro.org> (personally at LCE13) Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
hayeswang authored
Base on cdc_ether, add the mii functions for RTL8152 and RTL8153. The RTL8152 and RTL8153 support ECM mode which use the driver of cdc_ether. Add the mii functions. Then, the basic PHY access is possible. Signed-off-by:
-
Andy Shevchenko authored
Instead of passing each byte by stack let's use nice specifier for that. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
- 11 Jul, 2013 24 commits
-
-
Jitendra Kalsaria authored
Signed-off-by:
Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by:
-
Alexander Duyck authored
This change fixes an MTU sizing issue seen with gretap tunnels when non-gso packets are sent from the interface. In my case I was able to reproduce the issue by simply sending a ping of 1421 bytes with the gretap interface created on a device with a standard 1500 mtu. This fix is based on the fact that the tunnel mtu is already adjusted by dev->hard_header_len so it would make sense that any packets being compared against that mtu should also be adjusted by hard_header_len and the tunnel header instead of just the tunnel header. Signed-off-by:
Alexander Duyck <alexander.h.duyck@intel.com> Reported-by:
Cong Wang <amwang@redhat.com> Acked-by:
-
Paolo Valente authored
This patch removes the forward declaration of qfq_update_agg_ts, by moving the definition of the function above its first call. This patch also removes a useless forward declaration of qfq_schedule_agg. Reported-by:
Paolo Valente <paolo.valente@unimore.it> Signed-off-by:
-
Paolo Valente authored
In make_eligible, a mask is used to decide which groups must become eligible: the i-th group becomes eligible only if the i-th bit of the mask (from the right) is set. The mask is computed by left-shifting a 1 by a given number of places, and decrementing the result. The shift is performed on a ULL to avoid problems in case the number of places to shift is higher than 31. On a 32-bit machine, this is more costly than working on an UL. This patch replaces such a costly operation with two cheaper branches. The trick is based on the following fact: in case of a shift of at least 32 places, the resulting mask has at least the 32 less significant bits set, whereas the total number of groups is lower than 32. As a consequence, in this case it is enough to just set the 32 less significant bits of the mask with a cheaper ~0UL. In the other case, the shift can be safely performed on a UL. Reported-by:
David Laight <David.Laight@ACULAB.COM> Signed-off-by:
-
Alexander Duyck authored
This change makes it so that the GRE and VXLAN tunnels can make use of Tx checksum offload support provided by some drivers via the hw_enc_features. Without this fix enabling GSO means sacrificing Tx checksum offload and this actually leads to a performance regression as shown below: Utilization Send Throughput local GSO 10^6bits/s % S state 6276.51 8.39 enabled 7123.52 8.42 disabled To resolve this it was necessary to address two items. First netif_skb_features needed to be updated so that it would correctly handle the Trans Ether Bridging protocol without impacting the need to check for Q-in-Q tagging. To do this it was necessary to update harmonize_features so that it used skb_network_protocol instead of just using the outer protocol. Second it was necessary to update the GRE and UDP tunnel segmentation offloads so that they would reset the encapsulation bit and inner header offsets after the offload was complete. As a result of this change I have seen the following results on a interface with Tx checksum enabled for encapsulated frames: Utilization Send Throughput local GSO 10^6bits/s % S state 7123.52 8.42 disabled 8321.75 5.43 enabled v2: Instead of replacing refrence to skb->protocol with skb_network_protocol just replace the protocol reference in harmonize_features to allow for double VLAN tag checks. Signed-off-by: -
Camelia Groza authored
Found using checkpatch.pl Signed-off-by:
Camelia Groza <camelia.groza@gmail.com> Signed-off-by:
-
dingtianhong authored
If __rtnl_link_register() return faild when loading the ifb, it will take the wrong path and get oops, so fix it just like dummy. Signed-off-by:
Ding Tianhong <dingtianhong@huawei.com> Signed-off-by:
-
dingtianhong authored
We rename the dummy in modprobe.conf like this: install dummy0 /sbin/modprobe -o dummy0 --ignore-install dummy install dummy1 /sbin/modprobe -o dummy1 --ignore-install dummy We got oops when we run the command: modprobe dummy0 modprobe dummy1 ------------[ cut here ]------------ [ 3302.187584] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 [ 3302.195411] IP: [<ffffffff813fe62a>] __rtnl_link_unregister+0x9a/0xd0 [ 3302.201844] PGD 85c94a067 PUD 8517bd067 PMD 0 [ 3302.206305] Oops: 0002 [#1] SMP [ 3302.299737] task: ffff88105ccea300 ti: ffff880eba4a0000 task.ti: ffff880eba4a0000 [ 3302.307186] RIP: 0010:[<ffffffff813fe62a>] [<ffffffff813fe62a>] __rtnl_link_unregister+0x9a/0xd0 [ 3302.316044] RSP: 0018:ffff880eba4a1dd8 EFLAGS: 00010246 [ 3302.321332] RAX: 0000000000000000 RBX: ffffffff81a9d738 RCX: 0000000000000002 [ 3302.328436] RDX: 0000000000000000 RSI: ffffffffa04d602c RDI: ffff880eba4a1dd8 [ 3302.335541] RBP: ffff880eba4a1e18 R08: dead000000200200 R09: dead000000100100 [ 3302.342644] R10: 0000000000000080 R11: 0000000000000003 R12: ffffffff81a9d788 [ 3302.349748] R13: ffffffffa04d7020 R14: ffffffff81a9d670 R15: ffff880eba4a1dd8 [ 3302.364910] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3302.370630] CR2: 0000000000000008 CR3: 000000085e15e000 CR4: 00000000000427e0 [ 3302.377734] DR0: 0000000000000003 DR1: 00000000000000b0 DR2: 0000000000000001 [ 3302.384838] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 3302.391940] Stack: [ 3302.393944] ffff880eba4a1dd8 ffff880eba4a1dd8 ffff880eba4a1e18 ffffffffa04d70c0 [ 3302.401350] 00000000ffffffef ffffffffa01a8000 0000000000000000 ffffffff816111c8 [ 3302.408758] ffff880eba4a1e48 ffffffffa01a80be ffff880eba4a1e48 ffffffffa04d70c0 [ 3302.416164] Call Trace: [ 3302.418605] [<ffffffffa01a8000>] ? 0xffffffffa01a7fff [ 3302.423727] [<ffffffffa01a80be>] dummy_init_module+0xbe/0x1000 [dummy0] [ 3302.430405] [<ffffffffa01a8000>] ? 0xffffffffa01a7fff [ 3302.435535] [<ffffffff81000322>] do_one_initcall+0x152/0x1b0 [ 3302.441263] [<ffffffff810ab24b>] do_init_module+0x7b/0x200 [ 3302.446824] [<ffffffff810ad3d2>] load_module+0x4e2/0x530 [ 3302.452215] [<ffffffff8127ae40>] ? ddebug_dyndbg_boot_param_cb+0x60/0x60 [ 3302.458979] [<ffffffff810ad5f1>] SyS_init_module+0xd1/0x130 [ 3302.464627] [<ffffffff814b9652>] system_call_fastpath+0x16/0x1b [ 3302.490090] RIP [<ffffffff813fe62a>] __rtnl_link_unregister+0x9a/0xd0 [ 3302.496607] RSP <ffff880eba4a1dd8> [ 3302.500084] CR2: 0000000000000008 [ 3302.503466] ---[ end trace 8342d49cd49f78ed ]--- The reason is that when loading dummy, if __rtnl_link_register() return failed, the init_module should return and avoid take the wrong path. Signed-off-by:
Tan Xiaojun <tanxiaojun@huawei.com> Signed-off-by:
-
Helmut Schaa authored
at803x supports Atheros 8030, 8031 and 8035 PHYs. 8031 was missing from the mdio device id table. Signed-off-by:
Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by:
-
Hannes Frederic Sowa authored
This is a follow-up patch to 3630d400 ("ipv6: rt6_check_neigh should successfully verify neigh if no NUD information are available"). Since the removal of rt->n in rt6_info we can end up with a dst == NULL in rt6_check_neigh. In case the kernel is not compiled with CONFIG_IPV6_ROUTER_PREF we should also select a route with unkown NUD state but we must not avoid doing round robin selection on routes with the same target. So introduce and pass down a boolean ``do_rr'' to indicate when we should update rt->rr_ptr. As soon as no route is valid we do backtracking and do a lookup on a higher level in the fib trie. v2: a) Improved rt6_check_neigh logic (no need to create neighbour there) and documented return values. v3: a) Introduce enum rt6_nud_state to get rid of the magic numbers (thanks to David Miller). b) Update and shorten commit message a bit to actualy reflect the source. Reported-by:
Pierre Emeriaud <petrus.lt@gmail.com> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by:
-
Dmitry Kravkov authored
Since commit c957d09f "bnx2x: Remove sparse and coccinelle warnings" driver provided wrong partial csum for HW in tunneing scenarios. Reported-by:
Eric Dumazet <eric.dumazet@gmail.com> CC: Alexander Duyck <alexander.h.duyck@intel.com> CC: Pravin Shelar <pshelar@nicira.com> CC: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
Dmitry Kravkov <dmitry@broadcom.com> Tested-by:
-
Maarten Lankhorst authored
Move spin_lock_init to be called before the spinlocks are used, preventing a lockdep splat. Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@canonical.com> Signed-off-by:
-
Pravin B Shelar authored
vxlan exit module unregisters vxlan net and then it unregisters rtnl ops which triggers vxlan_dellink() from __rtnl_kill_links(). vxlan_dellink() deletes vxlan-dev from vxlan_list which has list-head in vxlan-net-struct but that is already gone due to net-unregister. That is how we are getting following crash. Following commit fixes the crash by fixing module exit path. BUG: unable to handle kernel paging request at ffff8804102c8000 IP: [<ffffffff812cc5e9>] __list_del_entry+0x29/0xd0 PGD 2972067 PUD 83e019067 PMD 83df97067 PTE 80000004102c8060 Oops: 0000 [#1] SMP DEBUG_PAGEALLOC Modules linked in: --- CPU: 19 PID: 6712 Comm: rmmod Tainted: GF 3.10.0+ #95 Hardware name: Dell Inc. PowerEdge R620/0KCKR5, BIOS 1.4.8 10/25/2012 task: ffff88080c47c580 ti: ffff88080ac50000 task.ti: ffff88080ac50000 RIP: 0010:[<ffffffff812cc5e9>] [<ffffffff812cc5e9>] __list_del_entry+0x29/0xd0 RSP: 0018:ffff88080ac51e08 EFLAGS: 00010206 RAX: ffff8804102c8000 RBX: ffff88040f0d4b10 RCX: dead000000200200 RDX: ffff8804102c8000 RSI: ffff88080ac51e58 RDI: ffff88040f0d4b10 RBP: ffff88080ac51e08 R08: 0000000000000001 R09: 2222222222222222 R10: 2222222222222222 R11: 2222222222222222 R12: ffff88080ac51e58 R13: ffffffffa07b8840 R14: ffffffff81ae48c0 R15: ffff88080ac51e58 FS: 00007f9ef105c700(0000) GS:ffff88082a800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff8804102c8000 CR3: 00000008227e5000 CR4: 00000000000407e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Stack: ffff88080ac51e28 ffffffff812cc6a1 2222222222222222 ffff88040f0d4000 ffff88080ac51e48 ffffffffa07b3311 ffff88040f0d4000 ffffffff81ae49c8 ffff88080ac51e98 ffffffff81492fc2 ffff88080ac51e58 ffff88080ac51e58 Call Trace: [<ffffffff812cc6a1>] list_del+0x11/0x40 [<ffffffffa07b3311>] vxlan_dellink+0x51/0x70 [vxlan] [<ffffffff81492fc2>] __rtnl_link_unregister+0xa2/0xb0 [<ffffffff8149448e>] rtnl_link_unregister+0x1e/0x30 [<ffffffffa07b7b7c>] vxlan_cleanup_module+0x1c/0x2f [vxlan] [<ffffffff810c9b31>] SyS_delete_module+0x1d1/0x2c0 [<ffffffff812b8a0e>] ? trace_hardirqs_on_thunk+0x3a/0x3f [<ffffffff81582f42>] system_call_fastpath+0x16/0x1b Code: eb 9f 55 48 8b 17 48 b9 00 01 10 00 00 00 ad de 48 8b 47 08 48 89 e5 48 39 ca 74 29 48 b9 00 02 20 00 00 00 ad de 48 39 c8 74 7a <4c> 8b 00 4c 39 c7 75 53 4c 8b 42 08 4c 39 c7 75 2b 48 89 42 08 RIP [<ffffffff812cc5e9>] __list_del_entry+0x29/0xd0 RSP <ffff88080ac51e08> CR2: ffff8804102c8000 Signed-off-by:
Pravin B Shelar <pshelar@nicira.com> Signed-off-by:
-
Sasha Levin authored
p9_release_pages() would attempt to dereference one value past the end of pages[]. This would cause the following crashes: [ 6293.171817] BUG: unable to handle kernel paging request at ffff8807c96f3000 [ 6293.174146] IP: [<ffffffff8412793b>] p9_release_pages+0x3b/0x60 [ 6293.176447] PGD 79c5067 PUD 82c1e3067 PMD 82c197067 PTE 80000007c96f3060 [ 6293.180060] Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC [ 6293.180060] Modules linked in: [ 6293.180060] CPU: 62 PID: 174043 Comm: modprobe Tainted: G W 3.10.0-next-20130710-sasha #3954 [ 6293.180060] task: ffff8807b803b000 ti: ffff880787dde000 task.ti: ffff880787dde000 [ 6293.180060] RIP: 0010:[<ffffffff8412793b>] [<ffffffff8412793b>] p9_release_pages+0x3b/0x60 [ 6293.214316] RSP: 0000:ffff880787ddfc28 EFLAGS: 00010202 [ 6293.214316] RAX: 0000000000000001 RBX: ffff8807c96f2ff8 RCX: 0000000000000000 [ 6293.222017] RDX: ffff8807b803b000 RSI: 0000000000000001 RDI: ffffea001c7e3d40 [ 6293.222017] RBP: ffff880787ddfc48 R08: 0000000000000000 R09: 0000000000000000 [ 6293.222017] R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000001 [ 6293.222017] R13: 0000000000000001 R14: ffff8807cc50c070 R15: ffff8807cc50c070 [ 6293.222017] FS: 00007f572641d700(0000) GS:ffff8807f3600000(0000) knlGS:0000000000000000 [ 6293.256784] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 6293.256784] CR2: ffff8807c96f3000 CR3: 00000007c8e81000 CR4: 00000000000006e0 [ 6293.256784] Stack: [ 6293.256784] ffff880787ddfcc8 ffff880787ddfcc8 0000000000000000 ffff880787ddfcc8 [ 6293.256784] ffff880787ddfd48 ffffffff84128be8 ffff880700000002 0000000000000001 [ 6293.256784] ffff8807b803b000 ffff880787ddfce0 0000100000000000 0000000000000000 [ 6293.256784] Call Trace: [ 6293.256784] [<ffffffff84128be8>] p9_virtio_zc_request+0x598/0x630 [ 6293.256784] [<ffffffff8115c610>] ? wake_up_bit+0x40/0x40 [ 6293.256784] [<ffffffff841209b1>] p9_client_zc_rpc+0x111/0x3a0 [ 6293.256784] [<ffffffff81174b78>] ? sched_clock_cpu+0x108/0x120 [ 6293.256784] [<ffffffff84122a21>] p9_client_read+0xe1/0x2c0 [ 6293.256784] [<ffffffff81708a90>] v9fs_file_read+0x90/0xc0 [ 6293.256784] [<ffffffff812bd073>] vfs_read+0xc3/0x130 [ 6293.256784] [<ffffffff811a78bd>] ? trace_hardirqs_on+0xd/0x10 [ 6293.256784] [<ffffffff812bd5a2>] SyS_read+0x62/0xa0 [ 6293.256784] [<ffffffff841a1a00>] tracesys+0xdd/0xe2 [ 6293.256784] Code: 66 90 48 89 fb 41 89 f5 48 8b 3f 48 85 ff 74 29 85 f6 74 25 45 31 e4 66 0f 1f 84 00 00 00 00 00 e8 eb 14 12 fd 41 ff c4 49 63 c4 <48> 8b 3c c3 48 85 ff 74 05 45 39 e5 75 e7 48 83 c4 08 5b 41 5c [ 6293.256784] RIP [<ffffffff8412793b>] p9_release_pages+0x3b/0x60 [ 6293.256784] RSP <ffff880787ddfc28> [ 6293.256784] CR2: ffff8807c96f3000 [ 6293.256784] ---[ end trace 50822ee72cd360fc ]--- Signed-off-by:
Sasha Levin <sasha.levin@oracle.com> Signed-off-by:
-
Geert Uytterhoeven authored
If NO_DMA=y: drivers/built-in.o: In function `sh_eth_free_dma_buffer': drivers/net/ethernet/renesas/sh_eth.c:1103: undefined reference to `dma_free_coherent' drivers/net/ethernet/renesas/sh_eth.c:1110: undefined reference to `dma_free_coherent' drivers/built-in.o: In function `sh_eth_ring_init': drivers/net/ethernet/renesas/sh_eth.c:1065: undefined reference to `dma_alloc_coherent' drivers/net/ethernet/renesas/sh_eth.c:1086: undefined reference to `dma_free_coherent' drivers/built-in.o: In function `sh_eth_ring_format': drivers/net/ethernet/renesas/sh_eth.c:988: undefined reference to `dma_map_single' drivers/built-in.o: In function `sh_eth_txfree': drivers/net/ethernet/renesas/sh_eth.c:1220: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `sh_eth_rx': drivers/net/ethernet/renesas/sh_eth.c:1323: undefined reference to `dma_map_single' drivers/built-in.o: In function `sh_eth_start_xmit': drivers/net/ethernet/renesas/sh_eth.c:1954: undefined reference to `dma_map_single' Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Hannes Frederic Sowa authored
We could end up expiring a route which is part of an ecmp route set. Doing so would invalidate the rt->rt6i_nsiblings calculations and could provoke the following panic: [ 80.144667] ------------[ cut here ]------------ [ 80.145172] kernel BUG at net/ipv6/ip6_fib.c:733! [ 80.145172] invalid opcode: 0000 [#1] SMP [ 80.145172] Modules linked in: 8021q nf_conntrack_netbios_ns nf_conntrack_broadcast ipt_MASQUERADE ip6table_mangle ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 iptable_nat nf_nat_ipv4 nf_nat iptable_mangle nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ebtable_filter ebtables ip6table_filter ip6_tables +snd_hda_intel snd_hda_codec snd_hwdep snd_seq snd_seq_device snd_pcm snd_page_alloc snd_timer virtio_balloon snd soundcore i2c_piix4 i2c_core virtio_net virtio_blk [ 80.145172] CPU: 1 PID: 786 Comm: ping6 Not tainted 3.10.0+ #118 [ 80.145172] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 80.145172] task: ffff880117fa0000 ti: ffff880118770000 task.ti: ffff880118770000 [ 80.145172] RIP: 0010:[<ffffffff815f3b5d>] [<ffffffff815f3b5d>] fib6_add+0x75d/0x830 [ 80.145172] RSP: 0018:ffff880118771798 EFLAGS: 00010202 [ 80.145172] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff88011350e480 [ 80.145172] RDX: ffff88011350e238 RSI: 0000000000000004 RDI: ffff88011350f738 [ 80.145172] RBP: ffff880118771848 R08: ffff880117903280 R09: 0000000000000001 [ 80.145172] R10: 0000000000000000 R11: 0000000000000000 R12: ffff88011350f680 [ 80.145172] R13: ffff880117903280 R14: ffff880118771890 R15: ffff88011350ef90 [ 80.145172] FS: 00007f02b5127740(0000) GS:ffff88011fd00000(0000) knlGS:0000000000000000 [ 80.145172] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 80.145172] CR2: 00007f981322a000 CR3: 00000001181b1000 CR4: 00000000000006e0 [ 80.145172] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 80.145172] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 80.145172] Stack: [ 80.145172] 0000000000000001 ffff880100000000 ffff880100000000 ffff880117903280 [ 80.145172] 0000000000000000 ffff880119a4cf00 0000000000000400 00000000000007fa [ 80.145172] 0000000000000000 0000000000000000 0000000000000000 ffff88011350f680 [ 80.145172] Call Trace: [ 80.145172] [<ffffffff815eeceb>] ? rt6_bind_peer+0x4b/0x90 [ 80.145172] [<ffffffff815ed985>] __ip6_ins_rt+0x45/0x70 [ 80.145172] [<ffffffff815eee35>] ip6_ins_rt+0x35/0x40 [ 80.145172] [<ffffffff815ef1e4>] ip6_pol_route.isra.44+0x3a4/0x4b0 [ 80.145172] [<ffffffff815ef34a>] ip6_pol_route_output+0x2a/0x30 [ 80.145172] [<ffffffff81616077>] fib6_rule_action+0xd7/0x210 [ 80.145172] [<ffffffff815ef320>] ? ip6_pol_route_input+0x30/0x30 [ 80.145172] [<ffffffff81553026>] fib_rules_lookup+0xc6/0x140 [ 80.145172] [<ffffffff81616374>] fib6_rule_lookup+0x44/0x80 [ 80.145172] [<ffffffff815ef320>] ? ip6_pol_route_input+0x30/0x30 [ 80.145172] [<ffffffff815edea3>] ip6_route_output+0x73/0xb0 [ 80.145172] [<ffffffff815dfdf3>] ip6_dst_lookup_tail+0x2c3/0x2e0 [ 80.145172] [<ffffffff813007b1>] ? list_del+0x11/0x40 [ 80.145172] [<ffffffff81082a4c>] ? remove_wait_queue+0x3c/0x50 [ 80.145172] [<ffffffff815dfe4d>] ip6_dst_lookup_flow+0x3d/0xa0 [ 80.145172] [<ffffffff815fda77>] rawv6_sendmsg+0x267/0xc20 [ 80.145172] [<ffffffff815a8a83>] inet_sendmsg+0x63/0xb0 [ 80.145172] [<ffffffff8128eb93>] ? selinux_socket_sendmsg+0x23/0x30 [ 80.145172] [<ffffffff815218d6>] sock_sendmsg+0xa6/0xd0 [ 80.145172] [<ffffffff81524a68>] SYSC_sendto+0x128/0x180 [ 80.145172] [<ffffffff8109825c>] ? update_curr+0xec/0x170 [ 80.145172] [<ffffffff81041d09>] ? kvm_clock_get_cycles+0x9/0x10 [ 80.145172] [<ffffffff810afd1e>] ? __getnstimeofday+0x3e/0xd0 [ 80.145172] [<ffffffff8152509e>] SyS_sendto+0xe/0x10 [ 80.145172] [<ffffffff8164efd9>] system_call_fastpath+0x16/0x1b [ 80.145172] Code: fe ff ff 41 f6 45 2a 06 0f 85 ca fe ff ff 49 8b 7e 08 4c 89 ee e8 94 ef ff ff e9 b9 fe ff ff 48 8b 82 28 05 00 00 e9 01 ff ff ff <0f> 0b 49 8b 54 24 30 0d 00 00 40 00 89 83 14 01 00 00 48 89 53 [ 80.145172] RIP [<ffffffff815f3b5d>] fib6_add+0x75d/0x830 [ 80.145172] RSP <ffff880118771798> [ 80.387413] ---[ end trace 02f20b7a8b81ed95 ]--- [ 80.390154] Kernel panic - not syncing: Fatal exception in interrupt Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by:
-
Jason Wang authored
Userspace may produce vectors greater than MAX_SKB_FRAGS. When we try to linearize parts of the skb to let the rest of iov to be fit in the frags, we need count copylen into linear when calling macvtap_alloc_skb() instead of partly counting it into data_len. Since this breaks zerocopy_sg_from_iovec() since its inner counter assumes nr_frags should be zero at beginning. This cause nr_frags to be increased wrongly without setting the correct frags. This bug were introduced from b92946e2 (macvtap: zerocopy: validate vectors before building skb). Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
Jason Wang <jasowang@redhat.com> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Jason Wang authored
Userspace may produce vectors greater than MAX_SKB_FRAGS. When we try to linearize parts of the skb to let the rest of iov to be fit in the frags, we need count copylen into linear when calling tun_alloc_skb() instead of partly counting it into data_len. Since this breaks zerocopy_sg_from_iovec() since its inner counter assumes nr_frags should be zero at beginning. This cause nr_frags to be increased wrongly without setting the correct frags. This bug were introduced from 0690899b (tun: experimental zero copy tx support) Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
dingtianhong authored
According to the commit 16b0dc29 (dummy: fix rcu_sched self-detected stalls) Eric Dumazet fix the problem in dummy, but the ifb will occur the same problem like the dummy modules. Trying to "modprobe ifb numifbs=30000" triggers : INFO: rcu_sched self-detected stall on CPU After this splat, RTNL is locked and reboot is needed. We must call cond_resched() to avoid this, even holding RTNL. Signed-off-by:
-
hayeswang authored
Add a new chip for RTL8411 series. Signed-off-by:
-
David S. Miller authored
Eliezer Tamir says: ==================== Here are three patches that complete the rename of lls to busy-poll 1. rename include/net/ll_poll.h to include/net/busy_poll.h 2. Rename ndo_ll_poll to ndo_busy_poll. Rename sk_mark_ll to sk_mark_napi_id. Rename skb_mark_ll to skb_mark_napi_id. Correct all useres of these functions. Update comments and defines in include/net/busy_poll.h 3. Rename LL_SO to BUSY_POLL_SO Rename sysctl_net_ll_{read,poll} to sysctl_busy_{read,poll} Fix up users of these variables. Fix documentation for sysctl. v2 fixed forgetting the ndo changes in v1 v3 is a resend with -M ==================== Signed-off-by: -
Eliezer Tamir authored
Rename LL_SO to BUSY_POLL_SO Rename sysctl_net_ll_{read,poll} to sysctl_busy_{read,poll} Fix up users of these variables. Fix documentation for sysctl. a patch for the socket.7 man page will follow separately, because of limitations of my mail setup. Signed-off-by:Eliezer Tamir <eliezer.tamir@linux.intel.com> Signed-off-by:
-
Eliezer Tamir authored
Rename ndo_ll_poll to ndo_busy_poll. Rename sk_mark_ll to sk_mark_napi_id. Rename skb_mark_ll to skb_mark_napi_id. Correct all useres of these functions. Update comments and defines in include/net/busy_poll.h Signed-off-by:
-
Eliezer Tamir authored
Rename the file and correct all the places where it is included. Signed-off-by:
-
- 10 Jul, 2013 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmcLinus Torvalds authored
Pull MMC updates from Chris Ball: "MMC highlights for 3.11: Core: - Add support for eMMC 5.1 devices - Add MMC_CAP_AGGRESSIVE_PM capability for aggressive power management of eMMC/SD between requests, using runtime PM - Add an ioctl to perform the eMMC 4.5 Sanitize command. Sample code at: git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc-utils.git Drivers: - dw_mmc: Add support for Rockchip's Cortex-A9 SoCs - dw_mmc: Add support for Altera SoCFPGAs - sdhci-esdhc-imx: Add support for 8-bit bus width, non-removable cards - sdhci-bcm-kona: New driver for Broadcom Kona (281xx) SoCs - sdhi/tmio: Add DT DMA support" * tag 'mmc-updates-for-3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (87 commits) mmc: bcm281xx SDHCI driver mmc: sdhci: add card_event callback to sdhci mmc: core: Fixup Oops for SDIO shutdown mmc: sdhci-pci: add another device id mmc: esdhc: Fix bug when writing to SDHCI_HOST_CONTROL register mmc: esdhc: Add support for 8-bit bus width and non-removable card mmc: core: production year for eMMC 4.41 and later mmc: omap: remove unnecessary #if 0's mmc: sdhci: fix ctrl_2 on super-speed selection mmc: dw_mmc-pltfm: add Rockchip variant mmc: dw_mmc-pltfm: move probe and remove below dt match table mmc: dw_mmc-pltfm: remove static from dw_mci_pltfm_remove mmc: sdhci-acpi: add support for eMMC hardware reset for HID 80860F14 mmc: sdhci-pci: add support for eMMC hardware reset for BYT eMMC. mmc: dw_mmc: Add support DW SD/MMC driver on SOCFPGA mmc: sdhci: fix caps2 for HS200 sdhci-pxav3: Fix runtime PM initialization mmc: core: Add DT-bindings for MMC_CAP2_FULL_PWR_CYCLE mmc: core: Invent MMC_CAP2_FULL_PWR_CYCLE mmc: core: Enable power_off_notify for eMMC shutdown sequence ... -
git://gitorious.org/linux-pwm/linux-pwmLinus Torvalds authored
Pull pwm changes from Thierry Reding: "A new driver supports driving PWM signals using the TPU unit found on various Renesas SoCs. Furthermore support is added for the NXP PCA9685 LED controller. Another big chunk is the sysfs interface which has been in the works for quite some time. The remaining patches are a random assortment of cleanups and fixes" * tag 'for-3.11-rc1' of git://gitorious.org/linux-pwm/linux-pwm: pwm: pwm-tiehrpwm: Use clk_enable/disable instead clk_prepare/unprepare. pwm: pca9685: Fix wrong argument to set MODE1_SLEEP bit pwm: renesas-tpu: Add MODULE_ALIAS to make module auto loading work pwm: renesas-tpu: fix return value check in tpu_probe() pwm: Add Renesas TPU PWM driver pwm: Add sysfs interface pwm: Fill in missing .owner fields pwm: add pca9685 driver pwm: atmel-tcb: prepare clk before calling enable pwm: devm: alloc correct pointer size pwm: mxs: Let device core handle pinctrl MAINTAINERS: Update PWM subsystem entry
-
git://git.infradead.org/battery-2.6Linus Torvalds authored
Pull battery subsystem update from Anton Vorontsov: "Nothing exciting this time, just assorted fixes and cleanups" * tag 'for-v3.11' of git://git.infradead.org/battery-2.6: (25 commits) charger-manager: Fix regulator_get() return check charger-manager: Fix a bug when it unregisters notifier block of extcon tps65090-charger: Add dt node to power_supply sbs-battery: Add dt to power_supply struct power_supply: Add of_node_put to fix refcount power_supply: Move of_node out of the #ifdef CONFIG_OF power/reset: Make the vexpress driver optional on arm and arm64 charger-manager: Add missing newlines, fix a couple of typos, add pr_fmt tps65090-charger: Fix AC detect MAINTAINERS: Update email address for Anton Vorontsov charger-manager: Ensure event is not used as format string power_supply: Replace strict_strtoul() with kstrtoul() generic-adc-battery: Fix checking if none of the channels are supported power: Use platform_{get,set}_drvdata() pm2301_charger: Return error if create_singlethread_workqueue fails pm2301_charger: Fix NULL pointer dereference lp8727_charger: Support the device tree feature twl4030_charger: Remove unnecessary platform_set_drvdata() rx51_battery: Remove unnecessary platform_set_drvdata() jz4740-battery: Remove unnecessary platform_set_drvdata() ...
-
