- 10 Jun, 2009 40 commits
-
-
Glauber Costa authored
We currently unblock shadow interrupt state when we skip an instruction, but failing to do so when we actually emulate one. This blocks interrupts in key instruction blocks, in particular sti; hlt; sequences If the instruction emulated is an sti, we have to block shadow interrupts. The same goes for mov ss. pop ss also needs it, but we don't currently emulate it. Without this patch, I cannot boot gpxe option roms at vmx machines. This is described at https://bugzilla.redhat.com/show_bug.cgi?id=494469Signed-off-by: Glauber Costa <glommer@redhat.com> CC: H. Peter Anvin <hpa@zytor.com> CC: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
-
Glauber Costa authored
This patch replaces drop_interrupt_shadow with the more general set_interrupt_shadow, that can either drop or raise it, depending on its parameter. It also adds ->get_interrupt_shadow() for future use. Signed-off-by: Glauber Costa <glommer@redhat.com> CC: H. Peter Anvin <hpa@zytor.com> CC: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
-
Marcelo Tosatti authored
kvm_assigned_dev_ack_irq is vulnerable to a race condition with the interrupt handler function. It does: if (dev->host_irq_disabled) { enable_irq(dev->host_irq); dev->host_irq_disabled = false; } If an interrupt triggers before the host->dev_irq_disabled assignment, it will disable the interrupt and set dev->host_irq_disabled to true. On return to kvm_assigned_dev_ack_irq, dev->host_irq_disabled is set to false, and the next kvm_assigned_dev_ack_irq call will fail to reenable it. Other than that, having the interrupt handler and work handlers run in parallel sounds like asking for trouble (could not spot any obvious problem, but better not have to, its fragile). CC: sheng.yang@intel.com Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
-
Marcelo Tosatti authored
KVM uses a function call IPI to cause the exit of a guest running on a physical cpu. For virtual interrupt notification there is no need to wait on IPI receival, or to execute any function. This is exactly what the reschedule IPI does, without the overhead of function IPI. So use it instead of smp_call_function_single in kvm_vcpu_kick. Also change the "guest_mode" variable to a bit in vcpu->requests, and use that to collapse multiple IPI's that would be issued between the first one and zeroing of guest mode. This allows kvm_vcpu_kick to called with interrupts disabled. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
-
Avi Kivity authored
Signed-off-by: Avi Kivity <avi@redhat.com>
-
Avi Kivity authored
Add cpu feature bit support for the MOVBE and POPCNT instructions. Signed-off-by: Avi Kivity <avi@redhat.com>
-
Avi Kivity authored
Signed-off-by: Avi Kivity <avi@redhat.com>
-
Avi Kivity authored
MTRR, PAT, MCE, and MCA are all supported (to some extent) but not reported. Vista requires these features, so if userspace relies on kernel cpuid reporting, it loses support for Vista. Signed-off-by: Avi Kivity <avi@redhat.com>
-
Jan Kiszka authored
The stats entry request_nmi is no longer used as the related user space interface was dropped. So clean it up. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Avi Kivity <avi@redhat.com>
-
Gleb Natapov authored
If a task switch caused by an event remove it from the event queue. VMX already does that. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
-
Andre Przywara authored
On AMD CPUs sometimes the DB bit in the stack segment descriptor is left as 1, although the whole segment has been made unusable. Clear it here to pass an Intel VMX entry check when cross vendor migrating. Signed-off-by: Andre Przywara <andre.przywara@amd.com> Signed-off-by: Avi Kivity <avi@redhat.com>
-
Glauber Costa authored
Apparently nobody turned this on in a while... setting apic_debug to something compilable, generates some errors. This patch fixes it. Signed-off-by: Glauber Costa <glommer@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
-
Chris Wright authored
Remove extra tab. Signed-off-by: Chris Wright <chrisw@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
-
Sheng Yang authored
Intel TXT(Trusted Execution Technology) required VMX off for all cpu to work when system shutdown. CC: Joseph Cihula <joseph.cihula@intel.com> Signed-off-by: Sheng Yang <sheng@linux.intel.com> Signed-off-by: Avi Kivity <avi@redhat.com>
-
Sheng Yang authored
Memory aliases with different memory type is a problem for guest. For the guest without assigned device, the memory type of guest memory would always been the same as host(WB); but for the assigned device, some part of memory may be used as DMA and then set to uncacheable memory type(UC/WC), which would be a conflict of host memory type then be a potential issue. Snooping control can guarantee the cache correctness of memory go through the DMA engine of VT-d. [avi: fix build on ia64] Signed-off-by: Sheng Yang <sheng@linux.intel.com> Signed-off-by: Avi Kivity <avi@redhat.com>
-
Sheng Yang authored
Shadow_mt_mask is out of date, now it have only been used as a flag to indicate if TDP enabled. Get rid of it and use tdp_enabled instead. Also put memory type logical in kvm_x86_ops->get_mt_mask(). Signed-off-by: Sheng Yang <sheng@linux.intel.com> Signed-off-by: Avi Kivity <avi@redhat.com>
-
Jan Blunck authored
This moves the get_cpu() call down to be called after we wake up the waiters. Therefore the waitqueue locks can safely be rt mutex. Signed-off-by: Jan Blunck <jblunck@suse.de> Signed-off-by: Sven-Thorsten Dietrich <sven@thebigcorporation.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
-
Gleb Natapov authored
It just returns pending IRQ vector from the queue for VMX/SVM. Get IRQ directly from the queue before migration and put it back after. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
-
Gleb Natapov authored
Re-put pending IRQ vector into interrupt_bitmap before migration. Otherwise it will be lost if migration happens in the wrong time. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
-
Gleb Natapov authored
Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
-
Gleb Natapov authored
They are recalculated before each use anyway. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
-
Gleb Natapov authored
Saves many exits to userspace in a case of IRQ chip in userspace. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
-
Gleb Natapov authored
Even if IRQ chip is in userspace. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
-
Gleb Natapov authored
No longer used. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
-
Gleb Natapov authored
It is the same as inject_pending_irq() for VMX/SVM now. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
-
Gleb Natapov authored
It always return false for VMX/SVM now. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
-
Gleb Natapov authored
Start to use interrupt/exception queues like VMX does. This also fix the bug that if exit was caused by a guest internal exception access to IDT the exception was not reinjected. Use EVENTINJ to inject interrupts. Use VINT only for detecting when IRQ windows is open again. EVENTINJ ensures the interrupt is injected immediately and not delayed. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
-
Gleb Natapov authored
kvm_arch_interrupt_allowed() also checks IF so drop the check. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
-
Gleb Natapov authored
Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
-
Gleb Natapov authored
Use the same callback to inject irq/nmi events no matter what irqchip is in use. Only from VMX for now. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
-
Gleb Natapov authored
At the vector level, kernel and userspace irqchip are fairly similar. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
-
Jan Kiszka authored
Fix build breakage of hpa lookup in audit_mappings_page. Moreover, make this function robust against shadow_notrap_nonpresent_pte entries. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Avi Kivity <avi@redhat.com>
-
Jes Sorensen authored
Restore local irq enabled state before calling kvm_arch_vcpu_init(), which calls kmalloc(GFP_KERNEL). Signed-off-by: Jes Sorensen <jes@sgi.com> Acked-by: Xiantao Zhang <xiantao.zhang@intel.com> Signed-off-by: Avi Kivity <avi@redhat.com>
-
Jes Sorensen authored
Preserve interrupt status around call to kvm_insert_vmm_mappin() in kvm_vcpu_pre_transition(). Signed-off-by: Jes Sorensen <jes@sgi.com> Acked-by: Xiantao Zhang <xiantao.zhang@intel.com> Signed-off-by: Avi Kivity <avi@redhat.com>
-
Jes Sorensen authored
Make sure to restore the psr after calling kvm_insert_vmm_mapping() which calls ia64_itr_entry() as it disables local interrupts and kvm_vcpu_init() may sleep. Avoids a warning from the lock debugging code. Signed-off-by: Jes Sorensen <jes@sgi.com> Acked-by : Xiantao Zhang <xiantao.zhang@intel.com> Signed-off-by: Avi Kivity <avi@redhat.com>
-
Jes Sorensen authored
vti_vcpu_load() doesn't do anything, so lets get rid of it. Signed-off-by: Jes Sorensen <jes@sgi.com> Acked-by : Xiantao Zhang<xiantao.zhang@intel.com> Signed-off-by: Avi Kivity <avi@redhat.com>
-
Xiantao Zhang authored
Flush all vcpu's TLB entries once changes guest's memory mapping. Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com> Signed-off-by: Avi Kivity <avi@redhat.com>
-
Marcelo Tosatti authored
Matt T. Yourst notes that kvm_arch_vcpu_ioctl_set_sregs lacks validity checking for the new cr3 value: "Userspace callers of KVM_SET_SREGS can pass a bogus value of cr3 to the kernel. This will trigger a NULL pointer access in gfn_to_rmap() when userspace next tries to call KVM_RUN on the affected VCPU and kvm attempts to activate the new non-existent page table root. This happens since kvm only validates that cr3 points to a valid guest physical memory page when code *inside* the guest sets cr3. However, kvm currently trusts the userspace caller (e.g. QEMU) on the host machine to always supply a valid page table root, rather than properly validating it along with the rest of the reloaded guest state." http://sourceforge.net/tracker/?func=detail&atid=893831&aid=2687641&group_id=180599 Check for a valid cr3 address in kvm_arch_vcpu_ioctl_set_sregs, triple fault in case of failure. Cc: stable@kernel.org Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
-
Jes Sorensen authored
Reorder locking to avoid holding the slots_lock when entering the guest. Signed-off-by: Jes Sorensen <jes@sgi.com> Acked-by : Xiantao Zhang<xiantao.zhang@intel.com> Signed-off-by: Avi Kivity <avi@redhat.com>
-
Avi Kivity authored
Suggested by Ingo Molnar. Signed-off-by: Avi Kivity <avi@redhat.com>
-