- 20 Sep, 2018 38 commits
-
-
Peng Li authored
All pf have permission to read packet statistics of public in hardware, but the read operation will clear registers which cause statistical inaccuracy. This patch removes all packet statistics of public. Signed-off-by:
Junxin Chen <chenjunxin1@huawei.com> Signed-off-by:
Peng Li <lipeng321@huawei.com> Signed-off-by:
Salil Mehta <salil.mehta@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Peng Li authored
The the actual Tx work is minimal, driver can clean up as more Tx descriptors as possible in a irq. Signed-off-by:
-
Peng Li authored
This patch adds unlikely for buf_num check. Signed-off-by:
-
Peng Li authored
All irq will float to cpu0 if do not set irq affinity. This patch adds default irq affinity in hns3 driver, users can also change the irq affinity in OS. Signed-off-by:
-
YueHaibing authored
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, but the implementation in this driver returns an 'int'. Found by coccinelle. Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Acked-by:
Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by:
-
YueHaibing authored
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by:
-
YueHaibing authored
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by:
-
YueHaibing authored
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by:
-
YueHaibing authored
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by:
-
YueHaibing authored
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by:
-
David S. Miller authored
Antoine Tenart says: ==================== net: phy: phylink: ensure the carrier is off when starting phylink Following the discussion we had regarding the phylink issue related to the carrier link state not being off when starting phylink, I sent a fix patch a few days ago for the PPv2 driver: https://lkml.org/lkml/2018/9/14/633 The idea was to send a patch which could go to the stable branches, but a better solution would be to directly call netif_carrier_off() from within phylink_start(). This is the aim of this series. ==================== Signed-off-by:
-
Antoine Tenart authored
This patch removes the explicit call to netif_carrier_off() in mvneta_open() as this is already handled in phylink_start(). Signed-off-by:
Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by:
-
Antoine Tenart authored
This patch removes the explicit call to netif_carrier_off() in PPv2's open() path, as this is now handled in phylink_start(). Signed-off-by:
-
Antoine Tenart authored
Phylink made an assumption about the carrier state being down when calling phylink_start(). If this assumption isn't satisfied, the internal phylink state could misbehave and a net device could end up not being functional. This patch fixes this by explicitly calling netif_carrier_off() in phylink_start(). Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
David S. Miller authored
Antoine Tenart says: ==================== net: mvpp2: improve the interrupt usage This series aims to improve the interrupts descriptions and usage in the Marvell PPv2 driver. - Before the series interrupts were named after their s/w usage, which in fact can be configured. The series rename all those interrupts and add a description of the ones left over. - In PPv2 the interrupts are mapped to vectors. Those vectors were directly mapped to a given CPU, and per-cpu accesses were done. While this worked on our cases, the registers accesses mapped to the vectors are not actually linked to a given CPU. They instead are linked to what is called a "s/w thread". The series modify this so that the s/w threads are used instead of the CPU numbers, by adding an indirection. This means we now can have systems with more CPUs than s/w threads. This is based on today's net-next, and was tested on various boards using both versions of the PPv2 engine. Two more patches will be coming, to update the device trees describing a PPv2 engine. The patches are ready, but will go through a different tree. I'll send them once this series will be accepted. This is not an issue as the PPv2 driver keeps the dt bindings backward compatibility. ==================== Signed-off-by: -
Antoine Tenart authored
As the mvpp2_percpu_read/write/... functions aren't really per-cpu but per s/w thread, rename them to include 'thread' instead of 'percpu'. This is a cosmetic patch. Signed-off-by:
-
Antoine Tenart authored
The Marvell PPv2 network controller has 9 internal threads. The driver works fine when there are less CPUs available than threads. This isn't true if more CPUs are available. As this is a valid use case, handle this particular case. Signed-off-by:
-
Antoine Tenart authored
This patch maps all uses of the CPU to threads. All this_cpu calls are replaced, and all smp_processor_id() calls are wrapped into the indirection. Signed-off-by:
-
Antoine Tenart authored
This patch reworks the Marvell PPv2 driver to stop using directly the CPU number to access per-thread registers. Signed-off-by:
-
Antoine Tenart authored
In the Marvell PPv2 driver the mvpp2_read_relaxed function is only used in a single file. Make it static and remove its prototype from the header. Signed-off-by:
-
Antoine Tenart authored
The Marvell PPv2 driver has per-cpu functions. As they only are used in the main file, make them static and remove their prototype from the header. Signed-off-by:
-
Antoine Tenart authored
Updates the PPv2 driver so that all CPU variables are unsigned, as it makes no sense to have a negative CPU number. This patch is cosmetic. Signed-off-by:
-
Antoine Tenart authored
The Marvell PPv2.2 engine only has 8 Rx queues per CPU, while PPv2.1 has 16 of them. This patch updates the code so that the Rx queues mask width is selected given the version of the network controller used. Signed-off-by:
-
Antoine Tenart authored
This patch updates the probing function so that the queue mode isn't updated while probing, as the driver would silently end up using a configuration not wanted by the user. The patch adds an extra check to validate the chosen queue mode instead, and the driver will fail to probe if the configuration is invalid. Signed-off-by:
-
Antoine Tenart authored
This patch updates the interrupts part of the Marvell PPv2 driver bindings documentation, to keep it in sync with the driver. Signed-off-by:
-
Antoine Tenart authored
This patch renames the IRQs in the Marvell PPv2 driver as their current names match the way they are used in software. But this will change in the future, and those IRQs have nothing to do with Rx/Tx interrupts (this can be configured). The new binding also describe more interrupts as some where left out. The old binding support is kept for backward compatibility. Signed-off-by:
-
Antoine Tenart authored
This patch sets the number of s/w threads to 9, its maximum value, instead of 8. This is not a fix as only 4 of the s/w threads were used so far, but more could be used in the future. Signed-off-by:
-
Kazuya Mizuguchi authored
This patch sets from two descriptor to one descriptor because R-Car Gen3 does not have the 4 bytes alignment restriction of the transmission buffer. Signed-off-by:
Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> Signed-off-by:
Simon Horman <horms+renesas@verge.net.au> Signed-off-by:
-
David S. Miller authored
Heiner Kallweit says: ==================== net: phy: make phy_stop() synchronous There have been few not that successful attempts in the past to make phy_stop() a synchronous call instead of just changing the state. Patch 1 of this series addresses an issue which prevented this change. At least for me it works fine now. Would appreciate if Geert could re-test as well that suspend doesn't throw an error. ==================== Signed-off-by: -
Heiner Kallweit authored
phy_stop() may be called e.g. when suspending, therefore all needed actions should be performed synchronously. Therefore add a synchronous call to the state machine. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Tested-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Heiner Kallweit authored
When bringing down the netdevice (incl. detaching it) and calling netif_carrier_off directly or indirectly the latter triggers an asynchronous linkwatch event. This linkwatch event eventually may fail to access chip registers in the ndo_get_stats/ndo_get_stats64 callback because the device isn't accessible any longer, see call trace in [0]. To prevent this scenario don't check for IFF_UP only, but also make sure that the netdevice is present. [0] https://lists.openwall.net/netdev/2018/03/15/62Signed-off-by:
-
David S. Miller authored
zhong jiang says: ==================== net: Use FIELD_SIZEOF directly instead of reimplementing its function The issue is detected with the help of Coccinelle. ==================== Signed-off-by: -
zhong jiang authored
FIELD_SIZEOF is defined as a macro to calculate the specified value. Therefore, We prefer to use the macro rather than calculating its value. Signed-off-by:
zhong jiang <zhongjiang@huawei.com> Signed-off-by:
-
zhong jiang authored
FIELD_SIZEOF is defined as a macro to calculate the specified value. Therefore, We prefer to use the macro rather than calculating its value. Signed-off-by:
-
zhong jiang authored
FIELD_SIZEOF is defined as a macro to calculate the specified value. Therefore, We prefer to use the macro rather than calculating its value. Signed-off-by:
-
zhong jiang authored
FIELD_SIZEOF is defined as a macro to calculate the specified value. Therefore, We prefer to use the macro rather than calculating its value. Signed-off-by:
-
zhong jiang authored
FIELD_SIZEOF is defined as a macro to calculate the specified value. Therefore, We prefer to use the macro rather than calculating its value. Signed-off-by:
-
git://git.open-mesh.org/linux-mergeDavid S. Miller authored
Simon Wunderlich says: ==================== This feature/cleanup patchset includes the following patches: - bump version strings, by Simon Wunderlich - Inform users about debugfs interface deprecation, by Sven Eckelmann - Implement tracing, planned to replace debugfs log messages, by Sven Eckelmann - Move OGM rebroadcasts to per interface struct, by Sven Eckelmann - Enable LockLess TX to increase throughput, by Sven Eckelmann ==================== Signed-off-by:
-
- 19 Sep, 2018 2 commits
-
-
zhong jiang authored
module.h already contained moduleparam.h, so it is safe to remove the redundant include. The issue is detected with the help of Coccinelle. Signed-off-by:
-
zhong jiang authored
module.h already contained moduleparam.h, so it is safe to remove the redundant include. The issue is detected with the help of Coccinelle. Signed-off-by:
-
