- 28 Dec, 2017 11 commits
-
-
Yishai Hadas authored
This patch extends the alloc context flow to be prepared for working with dynamic UAR allocations. Currently upon alloc context there is some fix size of UARs that are allocated (named 'static allocation') and there is no option to user application to ask for more or control which UAR will be used by which QP. In this patch the driver prepares its data structures to manage both the static and the dynamic allocations and let the user driver knows about the max value of dynamic blue-flame registers that are allowed. Downstream patches from this series will enable the dynamic allocation and the association as part of QP creation. Signed-off-by:
Yishai Hadas <yishaih@mellanox.com> Signed-off-by:
Leon Romanovsky <leon@kernel.org> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com>
-
Maor Gottlieb authored
Add missing inner RSS support capability as part of the RSS supported fields. In addition change MLX5_RX_HASH_INNER to 1UL << 31 in order to define it as unsigned. Fixes: 309fa347 ("IB/mlx5: Add support for RSS on the inner packet") Signed-off-by:
Maor Gottlieb <maorg@mellanox.com> Signed-off-by:
-
Guy Levi authored
Support RSS hash for inner headers according to a new flag, MLX4_IB_RX_HASH_INNER provided by the vendor channel. In case the flag is set, RSS hash will be done on the inner headers of VXLAN packets (which are encapsulated). Non-encapsulated packets will be hashed according to the outer headers. Signed-off-by:
Guy Levi <guyle@mellanox.com> Reviewed-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma.gitJason Gunthorpe authored
Patches for 4.16 that are dependent on patches sent to 4.15-rc. These are small clean ups for the vmw_pvrdma and i40iw drivers. * 'from-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma.git: RDMA/vmw_pvrdma: Remove usage of BIT() from UAPI header RDMA/vmw_pvrdma: Use refcount_t instead of atomic_t RDMA/vmw_pvrdma: Use more specific sizeof in kcalloc RDMA/vmw_pvrdma: Clarify QP and CQ is_kernel logic RDMA/vmw_pvrdma: Add UAR SRQ macros in ABI header file i40iw: Change accelerated flag to bool
-
Bryan Tan authored
BIT() should not be used in the UAPI header. Remove it. Signed-off-by:
Bryan Tan <bryantan@vmware.com> Signed-off-by:
-
Bryan Tan authored
refcount_t is the preferred type for refcounts. Change the QP and CQ refcnt fields to use refcount_t. Reviewed-by:
Adit Ranadive <aditr@vmware.com> Reviewed-by:
Aditya Sarwade <asarwade@vmware.com> Reviewed-by:
Jorgen Hansen <jhansen@vmware.com> Signed-off-by:
-
Bryan Tan authored
Convert the sizeof(void *) in two kcalloc calls to be more specific for the arrays that are being allocated. Reviewed-by:
-
Bryan Tan authored
Be more consistent in setting and checking is_kernel flag for QPs and CQs. Reviewed-by:
-
Bryan Tan authored
Support for SRQs were added in the vmw_pvrdma userlevel library before two necessary macros were added into the kernel ABI header file. Add the two UAR SRQ macros that are required by the userlevel library so that the library can rely on the kernel ABI header file for these SRQ macro definitions. Fixes: 8b10ba78 ("RDMA/vmw_pvrdma: Add shared receive queue support") Reviewed-by:
-
Henry Orosco authored
The accelerated flag only utilizes two values: 0 and 1. Modify accelerated flag in struct i40iw_cm_node to bool. Signed-off-by:
Henry Orosco <henry.orosco@intel.com> Signed-off-by:
Shiraz Saleem <shiraz.saleem@intel.com> Reviewed-by:
Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by:
-
Randy Dunlap authored
Delete ibnl_chk_listeners() and its kernel-doc comments from the core_priv.h header file. There is no such function. Fixes: 233c1955 ("RDMA/netlink: Reduce exposure of RDMA netlink functions") Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
- 27 Dec, 2017 5 commits
-
-
Majd Dibbiny authored
The rq/sq->psn is 24 bits as defined in the IB spec, therefore we mask out the 8 most significant bits to avoid overflow in modify_qp. Signed-off-by:
Majd Dibbiny <majd@mellanox.com> Signed-off-by:
Daniel Jurgens <danielj@mellanox.com> Reviewed-by:
Parav Pandit <parav@mellanox.com> Signed-off-by:
-
Nitzan Carmi authored
ibmr.device is being set only after ib_alloc_mr() is (successfully) complete. Therefore, in case mlx5_core_create_mkey() return with error, the error flow calls mlx5_free_priv_descs() which uses ibmr.device (which doesn't exist yet), causing a NULL dereference oops. To fix this, the IB device should be set in the mr struct earlier stage (e.g. prior to calling mlx5_core_create_mkey()). Fixes: 8a187ee5 ("IB/mlx5: Support the new memory registration API") Signed-off-by:
Max Gurtovoy <maxg@mellanox.com> Signed-off-by:
Nitzan Carmi <nitzanc@mellanox.com> Signed-off-by:
-
Moni Shoua authored
The XRC target QP create flow sets up qp_sec only if there is an IB link with LSM security enabled. However, several other related uAPI entry points blindly follow the qp_sec NULL pointer, resulting in a possible oops. Check for NULL before using qp_sec. Cc: <stable@vger.kernel.org> # v4.12 Fixes: d291f1a6 ("IB/core: Enforce PKey security on QPs") Reviewed-by:
Moni Shoua <monis@mellanox.com> Signed-off-by:
-
Moni Shoua authored
If the input command length is larger than the kernel supports an error should be returned in case the unsupported bytes are not cleared, instead of the other way aroudn. This matches what all other callers of ib_is_udata_cleared do and will avoid user ABI problems in the future. Cc: <stable@vger.kernel.org> # v4.10 Fixes: 189aba99 ("IB/uverbs: Extend modify_qp and support packet pacing") Reviewed-by:
-
Majd Dibbiny authored
User-space applications can do mmap and munmap directly at any time. Since the VMA list is not protected with a mutex, concurrent accesses to the VMA list from the mmap and munmap can cause data corruption. Add a mutex around the list. Cc: <stable@vger.kernel.org> # v4.7 Fixes: 7c2344c3 ("IB/mlx5: Implements disassociate_ucontext API") Reviewed-by:
-
- 22 Dec, 2017 18 commits
-
-
Don Hiatt authored
Change the slid arg to ingress_pkey_table_fail() to a full 32Bits and do not convert to 16Bits in caller. This is so we can keep everything 32bit in the kernel and only change to 16bit at the uapi boundary. Signed-off-by:
Don Hiatt <don.hiatt@intel.com> Signed-off-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by:
-
Don Hiatt authored
Use rdma_cap_opa_mad() to check for OPA to promote code reuse. Signed-off-by:
-
Tatyana Nikolova authored
The accepting QP ORD value should be adjusted not to exceed the peer QP IRD value (RFC 6581). This is skipped for loopback. After the ORD is validated by i40iw_record_ird_ord(), adjust the ORD value of the loopback accepting QP to prevent overrunning the IRD space of the peer QP. Also move the ORD accounting for 0-byte RDMA read to i40iw_record_ird_ord(). Fixes: f27b4746 ("i40iw: add connection management code") Signed-off-by:
Tatyana Nikolova <tatyana.e.nikolova@intel.com> Signed-off-by:
-
Tatyana Nikolova authored
Casting to u16 before validating IRD/ORD connection parameters could cause recording wrong IRD/ORD values in the cm_node. Validate the IRD/ORD parameters as they are passed by the application before recording them. Fixes: f27b4746 ("i40iw: add connection management code") Signed-off-by:
-
Shiraz Saleem authored
The LLP_DOUBT_REACHABILITY Asynchronous Event (AE) is an early warning of a connection issue. It is followed by LLP_TOO_MANY_RETRIES AE, if the retransmit threshold is reached and recovery is not possible for the connection. Currently we terminate the connection on receiving the LLP_DOUBT_REACHABILITY AE. Ignore this AE and terminate the connection only on LLP_TOO_MANY_RETRIES AE. This improves the user experience on cable disconnect/reconnect scenario while running iWARP traffic. On cable disconnect, the QP traffic is paused and the user has a larger and more reasonable timeout within which if the cable is reconnected, traffic can continue. Signed-off-by:
-
Shiraz Saleem authored
Partial FPDU processing is broken as the sequence number for the first partial FPDU is wrong due to incorrect Q2 buffer offset. The offset should be 64 rather than 16. Fixes: 786c6adb ("i40iw: add puda code") Signed-off-by:
-
Shiraz Saleem authored
On IP address change event, all connected QPs are torn down irrespective of whether IP address is involved in a connection. Only teardown connections those source or destination address matches the netdev interface IP address being changed, and if they are on the same VLAN as the netdev. Fixes: e5e74b61 ("i40iw: Add IP addr handling on netdev events") Signed-off-by:
-
Shiraz Saleem authored
Register a netdevice notifier for netdev UP/DOWN notification events and report the appropriate ib event. Signed-off-by:
-
Shiraz Saleem authored
Lower Inbound RDMA Read Queue (Q1) object count by a factor of 2 as it is incorrectly doubled. Also, round up Q1 and Transmit FIFO (XF) object count to power of 2 to satisfy hardware requirement. Fixes: 86dbcd0f ("i40iw: add file to handle cqp calls") Signed-off-by:
-
Shiraz Saleem authored
Consolidate all power of 2 round calculations to use kernel utility function roundup_pow_of_two(). Signed-off-by:
-
Shiraz Saleem authored
Increase I40IW_MAX_IRD_SIZE to 64 which is the device limit. Signed-off-by:
-
Dennis Dalessandro authored
Ensure both Mike and I are listed as maintainer contacts for Intel's qib, hfi1, and rdmavt drivers. Reviewed-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by:
-
Venkata Sandeep Dhanalakota authored
SA queries SM for class port info when there is a LID_CHANGE event. When a base lid is configured before fm is started ie when smlid is not yet assigned, SA handles the LID_CHANGE event and tries query SM with lid 0. This will cause an hang. [ 1106.958820] INFO: task kworker/2:0:23 blocked for more than 120 seconds. [ 1106.965082] Tainted: G O 4.12.0+ #1 [ 1106.969602] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1106.977227] kworker/2:0 D 0 23 2 0x00000000 [ 1106.977250] Workqueue: infiniband update_ib_cpi [ib_core] [ 1106.977261] Call Trace: [ 1106.977273] __schedule+0x28e/0x860 [ 1106.977285] schedule+0x36/0x80 [ 1106.977298] schedule_timeout+0x1a3/0x2e0 [ 1106.977310] ? radix_tree_iter_tag_clear+0x1b/0x20 [ 1106.977322] ? idr_alloc+0x64/0x90 [ 1106.977334] wait_for_completion+0xe3/0x140 [ 1106.977347] ? wake_up_q+0x80/0x80 [ 1106.977369] update_ib_cpi+0x163/0x210 [ib_core] [ 1106.977381] process_one_work+0x147/0x370 [ 1106.977394] worker_thread+0x4a/0x390 [ 1106.977406] kthread+0x109/0x140 [ 1106.977418] ? process_one_work+0x370/0x370 [ 1106.977430] ? kthread_park+0x60/0x60 [ 1106.977443] ret_from_fork+0x22/0x30 Always ensure a proper smlid is assigned before querying SM for cpi. Fixes: ee1c60b1 ("IB/SA: Modify SA to implicitly cache Class Port info") Reviewed-by:
Ira Weiny <ira.weiny@intel.com> Signed-off-by:
Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com> Signed-off-by:
-
Shiraz Saleem authored
The accelerated flag only utilizes two values: 0 and 1. Modify accelerated flag in struct nes_cm_node to bool. Signed-off-by:
-
Michael J. Ruhl authored
During driver init, various registers are saved to allow restoration after an FLR or gen3 bump. Some of these registers are not available in some circumstances (i.e. Virtual machines). This bug makes the driver unusable when the PCI device is passed into a VM, it fails during probe. Delete unnecessary register read/write, and only access register if the capability exists. Cc: <stable@vger.kernel.org> # 4.14.x Fixes: a618b7e4 ("IB/hfi1: Move saving PCI values to a separate function") Reviewed-by:
Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by:
-
Pravin Shedge authored
These duplicate includes have been found with scripts/checkincludes.pl but they have been removed manually to avoid removing false positives. Signed-off-by:
Pravin Shedge <pravin.shedge4linux@gmail.com> Signed-off-by:
-
Yixian Liu authored
This patch adds eq support for hip08. The eq table can be multi-hop addressed. Signed-off-by:
Yixian Liu <liuyixian@huawei.com> Reviewed-by:
Lijun Ou <oulijun@huawei.com> Reviewed-by:
Wei Hu (Xavier) <xavier.huwei@huawei.com> Signed-off-by:
-
Yixian Liu authored
Considering the compatibility of supporting hip08's eq process and possible changes of data structure, this patch refactors the eq code structure of hip06. We move all the eq process code for hip06 from hns_roce_eq.c into hns_roce_hw_v1.c, and also for hns_roce_eq.h. With these changes, it will be convenient to add the eq support for later hardware version. Signed-off-by:
-
- 21 Dec, 2017 6 commits
-
-
Alex Vesker authored
The locking order of vlan_rwsem (LOCK A) and then rtnl (LOCK B), contradicts other flows such as ipoib_open possibly causing a deadlock. To prevent this deadlock heavy flush is called with RTNL locked and only then tries to acquire vlan_rwsem. This deadlock is possible only when there are child interfaces. [ 140.941758] ====================================================== [ 140.946276] WARNING: possible circular locking dependency detected [ 140.950950] 4.15.0-rc1+ #9 Tainted: G O [ 140.954797] ------------------------------------------------------ [ 140.959424] kworker/u32:1/146 is trying to acquire lock: [ 140.963450] (rtnl_mutex){+.+.}, at: [<ffffffffc083516a>] __ipoib_ib_dev_flush+0x2da/0x4e0 [ib_ipoib] [ 140.970006] but task is already holding lock: [ 140.975141] (&priv->vlan_rwsem){++++}, at: [<ffffffffc0834ee1>] __ipoib_ib_dev_flush+0x51/0x4e0 [ib_ipoib] [ 140.982105] which lock already depends on the new lock. [ 140.990023] the existing dependency chain (in reverse order) is: [ 140.998650] -> #1 (&priv->vlan_rwsem){++++}: [ 141.005276] down_read+0x4d/0xb0 [ 141.009560] ipoib_open+0xad/0x120 [ib_ipoib] [ 141.014400] __dev_open+0xcb/0x140 [ 141.017919] __dev_change_flags+0x1a4/0x1e0 [ 141.022133] dev_change_flags+0x23/0x60 [ 141.025695] devinet_ioctl+0x704/0x7d0 [ 141.029156] sock_do_ioctl+0x20/0x50 [ 141.032526] sock_ioctl+0x221/0x300 [ 141.036079] do_vfs_ioctl+0xa6/0x6d0 [ 141.039656] SyS_ioctl+0x74/0x80 [ 141.042811] entry_SYSCALL_64_fastpath+0x1f/0x96 [ 141.046891] -> #0 (rtnl_mutex){+.+.}: [ 141.051701] lock_acquire+0xd4/0x220 [ 141.055212] __mutex_lock+0x88/0x970 [ 141.058631] __ipoib_ib_dev_flush+0x2da/0x4e0 [ib_ipoib] [ 141.063160] __ipoib_ib_dev_flush+0x71/0x4e0 [ib_ipoib] [ 141.067648] process_one_work+0x1f5/0x610 [ 141.071429] worker_thread+0x4a/0x3f0 [ 141.074890] kthread+0x141/0x180 [ 141.078085] ret_from_fork+0x24/0x30 [ 141.081559] other info that might help us debug this: [ 141.088967] Possible unsafe locking scenario: [ 141.094280] CPU0 CPU1 [ 141.097953] ---- ---- [ 141.101640] lock(&priv->vlan_rwsem); [ 141.104771] lock(rtnl_mutex); [ 141.109207] lock(&priv->vlan_rwsem); [ 141.114032] lock(rtnl_mutex); [ 141.116800] *** DEADLOCK *** Fixes: b4b678b0 ("IB/ipoib: Grab rtnl lock on heavy flush when calling ndo_open/stop") Signed-off-by:Alex Vesker <valex@mellanox.com> Signed-off-by:
-
Majd Dibbiny authored
Congestion counters are counted and queried per physical function. When working in LAG mode, CNP packets can be sent or received on both of the functions, thus congestion counters should be aggregated from the two physical functions. Fixes: e1f24a79 ("IB/mlx5: Support congestion related counters") Signed-off-by:
Aviv Heller <avivh@mellanox.com> Signed-off-by:
-
Bryan Tan authored
The use of wait queues in vmw_pvrdma for handling concurrent access to a resource leaves a race condition which can cause a use after free bug. Fix this by using the pattern from other drivers, complete() protected by dec_and_test to ensure complete() is called only once. Fixes: 29c8d9eb ("IB: Add vmw_pvrdma driver") Signed-off-by:
-
Bryan Tan authored
refcount_dec generates a warning when the operation causes the refcount to hit zero. Avoid this by using refcount_dec_and_test. Fixes: 8b10ba78 ("RDMA/vmw_pvrdma: Add shared receive queue support") Reviewed-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
-
Bryan Tan authored
The QP cleanup did not previously call ib_umem_release, resulting in a user-triggerable kernel resource leak. Fixes: 29c8d9eb ("IB: Add vmw_pvrdma driver") Reviewed-by:
-
Steve Wise authored
If a wr chain was posted and needed to be flushed, only the first wr in the chain was completed with FLUSHED status. The rest were never completed. This caused isert to hang on shutdown due to the missing completions which left iscsi IO commands referenced, stalling the shutdown. Fixes: 4fe7c296 ("iw_cxgb4: refactor sq/rq drain logic") Cc: stable@vger.kernel.org Signed-off-by:
Steve Wise <swise@opengridcomputing.com> Signed-off-by:
-
