- 03 Apr, 2009 1 commit
-
-
Paul E. McKenney authored
Impact: switch default config from CLASSIC_RCU to TREE_RCU Given that I have not gotten any complaints or bug reports on treercu recently, this patch makes it be the default. There are a number of other defconfig files that explicitly call out CLASSIC_RCU, but which have comment headers saying not to edit them. Probably holdovers from one of the flavors of "make config", but... Signed-off-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: akpm@linux-foundation.org Cc: dipankar@in.ibm.com Cc: niv@us.ibm.com Cc: manfred@colorfullife.com Cc: peterz@infradead.org LKML-Reference: <20090403040625.GA9473@linux.vnet.ibm.com> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
- 30 Mar, 2009 39 commits
-
-
Lai Jiangshan authored
cpu hotplug may happen asynchronously, some rcu callbacks are maybe still on dead cpu, rcu_barrier() also needs to wait for these rcu callbacks to complete, so we must ensure callbacks in dead cpu are migrated to online cpu. Paul E. McKenney's review: Good stuff, Lai!!! Simpler than any of the approaches that I was considering, and, better yet, independent of the underlying RCU implementation!!! I was initially worried that wake_up() might wake only one of two possible wait_event()s, namely rcu_barrier() and the CPU_POST_DEAD code, but the fact that wait_event() clears WQ_FLAG_EXCLUSIVE avoids that issue. I was also worried about the fact that different RCU implementations have different mappings of call_rcu(), call_rcu_bh(), and call_rcu_sched(), but this is OK as well because we just get an extra (harmless) callback in the case that they map together (for example, Classic RCU has call_rcu_sched() mapping to call_rcu()). Overlap of CPU-hotplug operations is prevented by cpu_add_remove_lock, and any stray callbacks that arrive (for example, from irq handlers running on the dying CPU) either are ahead of the CPU_DYING callbacks on the one hand (and thus accounted for), or happened after the rcu_barrier() started on the other (and thus don't need to be accounted for). Signed-off-by:
Lai Jiangshan <laijs@cn.fujitsu.com> Reviewed-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6Linus Torvalds authored
* 'drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (53 commits) drm: detect hdmi monitor by hdmi identifier (v3) drm: drm_fops.c unlock missing on error path drm: reorder struct drm_ioctl_desc to save space on 64 bit builds radeon: add some new pci ids drm: read EDID extensions from monitor drm: Use a little stash on the stack to avoid kmalloc in most DRM ioctls. drm/radeon: add regs required for occlusion queries support drm/i915: check the return value from the copy from user drm/radeon: fix logic in r600_page_table_init() to match ati_gart drm/radeon: r600 ptes are 64-bit, cleanup cleanup function. drm/radeon: don't call irq changes on r600 suspend/resume drm/radeon: fix r600 writeback across suspend/resume drm/radeon: fix r600 writeback setup. drm: fix warnings about new mappings in info code. drm/radeon: NULL noise: drivers/gpu/drm/radeon/radeon_*.c drm/radeon: fix r600 pci mapping calls. drm/radeon: r6xx/r7xx: fix possible oops in r600_page_table_cleanup() radeon: call the correct idle function, logic got inverted. drm/radeon: RS600: fix interrupt handling drm/r600: fix rptr address along lines of previous fixes to radeon. ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tipLinus Torvalds authored
* 'iommu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (60 commits) dma-debug: make memory range checks more consistent dma-debug: warn of unmapping an invalid dma address dma-debug: fix dma_debug_add_bus() definition for !CONFIG_DMA_API_DEBUG dma-debug/x86: register pci bus for dma-debug leak detection dma-debug: add a check dma memory leaks dma-debug: add checks for kernel text and rodata dma-debug: print stacktrace of mapping path on unmap error dma-debug: Documentation update dma-debug: x86 architecture bindings dma-debug: add function to dump dma mappings dma-debug: add checks for sync_single_sg_* dma-debug: add checks for sync_single_range_* dma-debug: add checks for sync_single_* dma-debug: add checking for [alloc|free]_coherent dma-debug: add add checking for map/unmap_sg dma-debug: add checking for map/unmap_page/single dma-debug: add core checking functions dma-debug: add debugfs interface dma-debug: add kernel command line parameters dma-debug: add initialization code ... Fix trivial conflicts due to whitespace changes in arch/x86/kernel/pci-nommu.c
-
Linus Torvalds authored
* reiserfs-updates: (35 commits) reiserfs: rename [cn]_* variables reiserfs: rename p_._ variables reiserfs: rename p_s_tb to tb reiserfs: rename p_s_inode to inode reiserfs: rename p_s_bh to bh reiserfs: rename p_s_sb to sb reiserfs: strip trailing whitespace reiserfs: cleanup path functions reiserfs: factor out buffer_info initialization reiserfs: add atomic addition of selinux attributes during inode creation reiserfs: use generic readdir for operations across all xattrs reiserfs: journaled xattrs reiserfs: use generic xattr handlers reiserfs: remove i_has_xattr_dir reiserfs: make per-inode xattr locking more fine grained reiserfs: eliminate per-super xattr lock reiserfs: simplify xattr internal file lookups/opens reiserfs: Clean up xattrs when REISERFS_FS_XATTR is unset reiserfs: remove IS_PRIVATE helpers reiserfs: remove link detection code ... Fixed up conflicts manually due to: - quota name cleanups vs variable naming changes: fs/reiserfs/inode.c fs/reiserfs/namei.c fs/reiserfs/stree.c fs/reiserfs/xattr.c - exported include header cleanups include/linux/reiserfs_fs.h -
Jeff Mahoney authored
This patch renames n_, c_, etc variables to something more sane. This is the sixth in a series of patches to rip out some of the awful variable naming in reiserfs. Signed-off-by:
Jeff Mahoney <jeffm@suse.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Jeff Mahoney authored
This patch is a simple s/p_._//g to the reiserfs code. This is the fifth in a series of patches to rip out some of the awful variable naming in reiserfs. Signed-off-by:
-
Jeff Mahoney authored
This patch is a simple s/p_s_tb/tb/g to the reiserfs code. This is the fourth in a series of patches to rip out some of the awful variable naming in reiserfs. Signed-off-by:
-
Jeff Mahoney authored
This patch is a simple s/p_s_inode/inode/g to the reiserfs code. This is the third in a series of patches to rip out some of the awful variable naming in reiserfs. Signed-off-by:
-
Jeff Mahoney authored
This patch is a simple s/p_s_bh/bh/g to the reiserfs code. This is the second in a series of patches to rip out some of the awful variable naming in reiserfs. Signed-off-by:
-
Jeff Mahoney authored
This patch is a simple s/p_s_sb/sb/g to the reiserfs code. This is the first in a series of patches to rip out some of the awful variable naming in reiserfs. Signed-off-by:
-
Jeff Mahoney authored
This patch strips trailing whitespace from the reiserfs code. Signed-off-by:
-
Jeff Mahoney authored
This patch cleans up some redundancies in the reiserfs tree path code. decrement_bcount() is essentially the same function as brelse(), so we use that instead. decrement_counters_in_path() is exactly the same function as pathrelse(), so we kill that and use pathrelse() instead. There's also a bit of cleanup that makes the code a bit more readable. Signed-off-by:
-
Jeff Mahoney authored
This is the first in a series of patches to make balance_leaf() not quite so insane. This patch factors out the open coded initializations of buffer_info structures and defines a few initializers for the 4 cases they're used. Signed-off-by:
-
Jeff Mahoney authored
Some time ago, some changes were made to make security inode attributes be atomically written during inode creation. ReiserFS fell behind in this area, but with the reworking of the xattr code, it's now fairly easy to add. The following patch adds the ability for security attributes to be added automatically during inode creation. Signed-off-by:
-
Jeff Mahoney authored
The current reiserfs xattr implementation open codes reiserfs_readdir and frees the path before calling the filldir function. Typically, the filldir function is something that modifies the file system, such as a chown or an inode deletion that also require reading of an inode associated with each direntry. Since the file system is modified, the path retained becomes invalid for the next run. In addition, it runs backwards in attempt to minimize activity. This is clearly suboptimal from a code cleanliness perspective as well as performance-wise. This patch implements a generic reiserfs_for_each_xattr that uses the generic readdir and a specific filldir routine that simply populates an array of dentries and then performs a specific operation on them. When all files have been operated on, it then calls the operation on the directory itself. The result is a noticable code reduction and better performance. Signed-off-by:
-
Jeff Mahoney authored
Deadlocks are possible in the xattr code between the journal lock and the xattr sems. This patch implements journalling for xattr operations. The benefit is twofold: * It gets rid of the deadlock possibility by always ensuring that xattr write operations are initiated inside a transaction. * It corrects the problem where xattr backing files aren't considered any differently than normal files, despite the fact they are metadata. I discussed the added journal load with Chris Mason, and we decided that since xattrs (versus other journal activity) is fairly rare, the introduction of larger transactions to support journaled xattrs wouldn't be too big a deal. Signed-off-by:
-
Jeff Mahoney authored
Christoph Hellwig had asked me quite some time ago to port the reiserfs xattrs to the generic xattr interface. This patch replaces the reiserfs-specific xattr handling code with the generic struct xattr_handler. However, since reiserfs doesn't split the prefix and name when accessing xattrs, it can't leverage generic_{set,get,list,remove}xattr without needlessly reconstructing the name on the back end. Update 7/26/07: Added missing dput() to deletion path. Update 8/30/07: Added missing mark_inode_dirty when i_mode is used to represent an ACL and no previous ACL existed. Signed-off-by: -
Jeff Mahoney authored
With the changes to xattr root locking, the i_has_xattr_dir flag is no longer needed. This patch removes it. Signed-off-by:
-
Jeff Mahoney authored
The per-inode locking can be made more fine-grained to surround just the interaction with the filesystem itself. This really only applies to protecting reads during a write, since concurrent writes are barred with inode->i_mutex at the vfs level. Signed-off-by:
-
Jeff Mahoney authored
With the switch to using inode->i_mutex locking during lookups/creation in the xattr root, the per-super xattr lock is no longer needed. This patch removes it. Signed-off-by:
-
Jeff Mahoney authored
The xattr file open/lookup code is needlessly complex. We can use vfs-level operations to perform the same work, and also simplify the locking constraints. The locking advantages will be exploited in future patches. Signed-off-by:
-
Jeff Mahoney authored
The current reiserfs xattr implementation will not clean up old xattr files if files are deleted when REISERFS_FS_XATTR is unset. This results in inaccessible lost files, wasting space. This patch compiles in basic xattr knowledge, such as how to delete them and change ownership for quota tracking. If the file system has never used xattrs, then the operation is quite fast: it returns immediately when it sees there is no .reiserfs_priv directory. Signed-off-by:
-
Jeff Mahoney authored
There are a number of helper functions for marking a reiserfs inode private that were leftover from reiserfs did its own thing wrt to private inodes. S_PRIVATE has been in the kernel for some time, so this patch removes the helpers and uses IS_PRIVATE instead. Signed-off-by:
-
Jeff Mahoney authored
Early in the reiserfs xattr development, there was a plan to use hardlinks to save disk space for identical xattrs. That code never materialized and isn't going to, so this patch removes the detection code. Signed-off-by:
-
Jeff Mahoney authored
This patch changes reiserfs_get_page to take an offset rather than an index since no callers calculate the index differently. Signed-off-by:
-
Jeff Mahoney authored
This patch removes the xinode and mapping variables from reiserfs_xattr_{get,set}. Signed-off-by: -
Jeff Mahoney authored
This patch makes many paths that are currently using warnings to handle the error. Signed-off-by:
-
Jeff Mahoney authored
Although reiserfs can currently handle severe errors such as journal failure, it cannot handle less severe errors like metadata i/o failure. The following patch adds a reiserfs_error() function akin to the one in ext3. Subsequent patches will use this new error handler to handle errors more gracefully in general. Signed-off-by:
-
Jeff Mahoney authored
This patch kills off reiserfs_journal_abort as it is never called, and combines __reiserfs_journal_abort_{soft,hard} into one function called reiserfs_abort_journal, which performs the same work. It is silent as opposed to the old version, since the message was always issued after a regular 'abort' message. Signed-off-by: -
Jeff Mahoney authored
ReiserFS panics can be somewhat inconsistent. In some cases: * a unique identifier may be associated with it * the function name may be included * the device may be printed separately This patch aims to make warnings more consistent. reiserfs_warning() prints the device name, so printing it a second time is not required. The function name for a warning is always helpful in debugging, so it is now automatically inserted into the output. Hans has stated that every warning should have a unique identifier. Some cases lack them, others really shouldn't have them. reiserfs_warning() now expects an id associated with each message. In the rare case where one isn't needed, "" will suffice. Signed-off-by:
-
Jeff Mahoney authored
The formatting of the error buffer is race prone. It uses static buffers for both formatting and output. While overwriting the error buffer can product garbled output, overwriting the format buffer with incompatible % directives can cause crashes. Signed-off-by:
-
Jeff Mahoney authored
uniqueness2type and type2uniquness issue a warning when the value is unknown. When called from reiserfs_warning, this causes a re-entrancy problem and deadlocks on the error buffer lock. Signed-off-by:
-
Jeff Mahoney authored
vsprintf will consume varargs on its own. Skipping them manually results in garbage in the error buffer, or Oopses in the case of pointers. This patch removes the advancement and fixes a number of bugs where crashes were observed as side effects of a regular error report. Signed-off-by:
-
Jeff Mahoney authored
ReiserFS warnings can be somewhat inconsistent. In some cases: * a unique identifier may be associated with it * the function name may be included * the device may be printed separately This patch aims to make warnings more consistent. reiserfs_warning() prints the device name, so printing it a second time is not required. The function name for a warning is always helpful in debugging, so it is now automatically inserted into the output. Hans has stated that every warning should have a unique identifier. Some cases lack them, others really shouldn't have them. reiserfs_warning() now expects an id associated with each message. In the rare case where one isn't needed, "" will suffice. Signed-off-by:
-
Jeff Mahoney authored
In several places, reiserfs_warning is used when there is no warning, just a notice. This patch changes some of them to indicate that the message is merely informational. Signed-off-by:
-
Jeff Mahoney authored
The output format between a warning/error/panic/info/etc changes with which one is used. The following patch makes the messages more internally consistent, but also more consistent with other Linux filesystems. Signed-off-by:
-
Jeff Mahoney authored
This patch makes leaf_paste_entries more consistent with respect to the other leaf operations. Using buffer_info instead of buffer_head directly allows us to get a superblock pointer for use in error handling. Signed-off-by:
-
Jeff Mahoney authored
This patch fixes up the reiserfs code such that transaction ids are always unsigned ints. In places they can currently be signed ints or unsigned longs. The former just causes an annoying clm-2200 warning and may join a transaction when it should wait. The latter is just for correctness since the disk format uses a 32-bit transaction id. There aren't any runtime problems that result from it not wrapping at the correct location since the value is truncated correctly even on big endian systems. The 0 value might make it to disk, but the mount-time checks will bump it to 10 itself. Signed-off-by:
-
Jeff Mahoney authored
The following patch adds the fields for tracking mount counts and last fsck timestamps to the superblock. It also increments the mount count on every read-write mount. Reiserfsprogs 3.6.21 added support for these fields. Signed-off-by:
-
