- 08 Dec, 2016 8 commits
-
-
Michel Dänzer authored
Looks like this was missed when dce_v6_0.c was added. Fixes: e2cdf640 ("drm/amdgpu: add display controller implementation for si v10") Reviewed-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Michel Dänzer <michel.daenzer@amd.com> Signed-off-by:
-
Alex Deucher authored
We don't require a resticted pinning in these cases, so just use plain pin. Reviewed-by:
Edward O'Callaghan <funfunctor@folklore1984.net> Signed-off-by:
-
Arindam Nath authored
For CZ, some function pointers like display_configuration_changed are not set. So when HW manager tries to configure display, we end up with messages like "[ powerplay ] this function not implement!" in the logs. This message is informational, but lacks details on which function is not implemented and why. Rather than using KERN_INFO to print the message everytime the system boots, we rather use pr_debug so that it is only printed when debug prints are enabled at runtime. Reviewed-by:
Huang Rui <ray.huang@amd.com> Signed-off-by:
Arindam Nath <arindam.nath@amd.com> Signed-off-by:
-
Tom St Denis authored
Signed-off-by:
Tom St Denis <tom.stdenis@amd.com> Acked-by:
-
Tom St Denis authored
Signed-off-by:
-
Tom St Denis authored
Implemented for SGPRs for GFX v8 initially. (v2) cleanup minor whitespace and remove sanity check and addressing is in dwords not bytes Signed-off-by: -
Evan Quan authored
Allows userspace components to fetch information from the vbios image. v2: agd: fix warning Reviewed-by:
Evan Quan <evan.quan@amd.com> Reviewed-by:
-
Evan Quan authored
It's necessary if we want to export vbios image out. Reviewed-by:
-
- 06 Dec, 2016 32 commits
-
-
Huang Rui authored
Signed-off-by:
Ken Wang <Qingqing.Wang@amd.com> Signed-off-by:
-
Alex Deucher authored
New variant. Signed-off-by: -
Alex Deucher authored
New variant. Signed-off-by: -
Alex Deucher authored
New variant. Signed-off-by: -
Alex Deucher authored
New variant. Signed-off-by: -
Xiangliang Yu authored
If doesn't enable dpm, the powerplay will not allocate memory for hw management. So, hw_init_power_state_table function will reference NULL pointer when resetting. Signed-off-by:
Xiangliang Yu <Xiangliang.Yu@amd.com> Reviewed-by:
Rex Zhu <Rex.Zhu@amd.com> Reviewed-by:
-
Xiangliang Yu authored
For SR-IOV client, driver shouldn't touch the GFX hw during HW fini, otherwise, gfx will fail to start after rebooting guest os. Signed-off-by:
shaoyunl <Shaoyun.Liu@amd.com> Signed-off-by:
Monk Liu <Monk.Liu@amd.com> Acked-by:
-
Xiangliang Yu authored
Put the initial part close to memory allocate, it will make code more clear. Signed-off-by:
-
Xiangliang Yu authored
SMU buffer is used for power feature, but for virtualization, the power is controlled by hypervisor. Ignore it. Signed-off-by:
-
Xiangliang Yu authored
For virtualization, FW size need to cut its digest part. Signed-off-by:
Frank Min <Frank.Min@amd.com> Signed-off-by:
-
Xiangliang Yu authored
Vi_structs.h has defined vi_mqd, drop redundant vi_mqd define. Signed-off-by:
-
Flora Cui authored
Signed-off-by:
Flora Cui <Flora.Cui@amd.com> Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by:
-
Hawking Zhang authored
If vBIOS noFan bit is set, the fan table parameters in thermal controller will not get initialized. The driver should avoid to use these uninitialized parameter to do calculation. Otherwise, it may trigger divide 0 error. Signed-off-by:
-
Alex Xie authored
Fixes a rare NULL pointer dereference in amdgpu_ttm_bind. The issue was found by Nicolai Haehnle. The patch was tested by Nicolai Haehnle. Signed-off-by:
Alex Xie <AlexBin.Xie@amd.com> Reviewed-by:
Chunming Zhou <david1.zhou@amd.com> Reviewed-by:
-
Rex Zhu authored
fix bug on uvd pg enabled, when reboot vm in pass through case, we need to notify smu power up uvd/vce if they were power down. otherwise, the vbios post will fail. Signed-off-by:
-
Rex Zhu authored
Signed-off-by:
-
Michel Dänzer authored
Fixes hangs in that case under some circumstances. v2: * Only use non-0 x/yorigin if the cursor is (partially) outside of the top/left edge of the total surface with AVIVO/DCE Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1000433 Cc: stable@vger.kernel.org Signed-off-by:
-
Michel Dänzer authored
We were storing viewport relative coordinates for AVIVO/DCE display engines. However, radeon_crtc_cursor_set2 and radeon_cursor_reset pass radeon_crtc->cursor_x/y as the x/y parameters of radeon_cursor_move_locked, which would break if the CRTC isn't located at (0, 0). Cc: stable@vger.kernel.org Signed-off-by:
-
Michel Dänzer authored
The cursor size also affects the register programming. Cc: stable@vger.kernel.org Signed-off-by:
-
Michel Dänzer authored
Normally only necessary when the cursor size changes. Signed-off-by:
-
Michel Dänzer authored
The cursor size also affects the register programming. Cc: stable@vger.kernel.org Signed-off-by:
-
Michel Dänzer authored
We were storing viewport relative coordinates. However, crtc_cursor_set2 and cursor_reset pass amdgpu_crtc->cursor_x/y as the x/y parameters of cursor_move_locked, which would break if the CRTC isn't located at (0, 0). Cc: stable@vger.kernel.org Signed-off-by:
-
Arindam Nath authored
GUI idle interrupts should be enabled only after we have enabled coarse grain clock gating (CGCG). This prevents GFX engine generating idle interrupt even though CGCG is not completely enabled. Most of the time this goes un-noticed, but on some Stoney ASICs this results in GFX engine hang after system resumes from suspend. The issue is not particular to Stoney though and could have occured on any ASIC. The patch fixes this issue. Reviewed-by:
Sunil Uttarwar <Sunil.Uttarwar1@amd.com> Signed-off-by:
-
Maruthi Srinivas Bayyavarapu authored
VCE clocks are set to be disabled, when not in use. Signed-off-by:
Maruthi Bayyavarapu <maruthi.bayyavarapu@amd.com> Reviewed-by:
-
Rex Zhu authored
can't get uvd's state by uvd_enabled. uvd_enabled is used for request higher mclk. in multi-display case, mclk has been in highest clock, no matter uvd's state changed, uvd_enabled will not be changed. Signed-off-by:
-
Xiangliang Yu authored
Forget to check UCODE_ID_STORAGE case and will cause to print error message when loading driver, correct it. Signed-off-by:
-
Xiangliang Yu authored
For virtualization, firmware loading need the firmware version info, and will load the right firmware. So, transfer fw_version to toc. Signed-off-by:
-
Rex Zhu authored
the root cause is we gate the clock to uvd vcpu. mclk's change should need the response from uvd if it is power on. Signed-off-by:
-
Rex Zhu authored
Signed-off-by:
-
Alex Deucher authored
It's per queue not per pipe. Reviewed-by:
-
Alex Deucher authored
This reverts commit a693e050. This breaks on systems with huge amounts of system memory as we do not have enough vram to store the page tables. Additionally, this is less of an issue with the recent gtt manager changes. Reviewed-by:
-
Dave Airlie authored
Merge branch 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next Just refactoring HDMI driver by using infoframe helper function, fixing GSC Kconfig dependency issue and including trivial cleanups. * 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: drm/exynos: Use VIDEO_SAMSUNG_EXYNOS_GSC=n as GSC Kconfig dependency drm/exynos: gsc: fix spelling mistakes exynos-drm: Fix error messages to print flags and size drm/exynos/hdmi: refactor infoframe code
-
