Synopsis

	size[4] TReadlink tag[2] fid[4]
	size[4] RReadlink tag[2] target[s]

Description
	Readlink is used to return the contents of the symoblic link
        referred by fid. Contents of symboic link is returned as a
        response.

	target[s] - Contents of the symbolic link referred by fid.
Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

Use V9FS_MAGIC as the file system type while filling kernel statfs
strucutre instead of using host file system magic number. Also move
the definition of V9FS_MAGIC from v9fs.h to standard magic.h file.
Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

Synopsis

    size[4] TGetlock tag[2] fid[4] getlock[n]
    size[4] RGetlock tag[2] getlock[n]

Description

TGetlock is used to test for the existence of byte range posix locks on a file
identified by given fid. The reply contains getlock structure. If the lock could
be placed it returns F_UNLCK in type field of getlock structure.  Otherwise it
returns the details of the conflicting locks in the getlock structure

    getlock structure:
      type[1] - Type of lock: F_RDLCK, F_WRLCK
      start[8] - Starting offset for lock
      length[8] - Number of bytes to check for the lock
             If length is 0, check for lock in all bytes starting at the location
            'start' through to the end of file
      pid[4] - PID of the process that wants to take lock/owns the task
               in case of reply
      client[4] - Client id of the system that owns the process which
                  has the conflicting lock
Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

Synopsis

    size[4] TLock tag[2] fid[4] flock[n]
    size[4] RLock tag[2] status[1]

Description

Tlock is used to acquire/release byte range posix locks on a file
identified by given fid. The reply contains status of the lock request

    flock structure:
        type[1] - Type of lock: F_RDLCK, F_WRLCK, F_UNLCK
        flags[4] - Flags could be either of
          P9_LOCK_FLAGS_BLOCK - Blocked lock request, if there is a
            conflicting lock exists, wait for that lock to be released.
          P9_LOCK_FLAGS_RECLAIM - Reclaim lock request, used when client is
            trying to reclaim a lock after a server restrart (due to crash)
        start[8] - Starting offset for lock
        length[8] - Number of bytes to lock
          If length is 0, lock all bytes starting at the location 'start'
          through to the end of file
        pid[4] - PID of the process that wants to take lock
        client_id[4] - Unique client id

        status[1] - Status of the lock request, can be
          P9_LOCK_SUCCESS(0), P9_LOCK_BLOCKED(1), P9_LOCK_ERROR(2) or
          P9_LOCK_GRACE(3)
          P9_LOCK_SUCCESS - Request was successful
          P9_LOCK_BLOCKED - A conflicting lock is held by another process
          P9_LOCK_ERROR - Error while processing the lock request
          P9_LOCK_GRACE - Server is in grace period, it can't accept new lock
            requests in this period (except locks with
            P9_LOCK_FLAGS_RECLAIM flag set)
Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

SYNOPSIS
    size[4] Tfsync tag[2] fid[4]

    size[4] Rfsync tag[2]

DESCRIPTION

The Tfsync transaction transfers ("flushes") all modified in-core data of
file identified by fid to the disk device (or other  permanent  storage
device)  where that  file  resides.
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

Inherit default ACL on create
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

We need update the acl value on chmod
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

This patch also update mode bits, as a normal file system.
I am not sure wether we should do that, considering that
a setxattr on the server will again update the ACL/mode value
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

This patch implement fetching POSIX ACL from the server
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

The ACL value is fetched as a part of inode initialization
from the server and the permission checking function use the
cached value of the ACL
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

the same calculation is done in p9_client_write
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

The presence of v9fs_direct_IO() in the address space ops vector
allowes open() O_DIRECT flags which would have failed otherwise.

In the non-cached mode, we shunt off direct read and write requests before
the VFS gets them, so this method should never be called.

Direct IO is not 'yet' supported in the cached mode. Hence when
this routine is called through generic_file_aio_read(), the read/write fails
with an error.
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

Signed-off-by: Arun R Bharadwaj <arun@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

The current implementation of 9p client mkdir function does not
set the S_ISGID mode bit for the directory being created if the
parent directory has this bit set. This patch fixes this problem
so that the newly created directory inherits the gid from parent
directory and not from the process creating this directory, when
the S_ISGID bit is set in parent directory.
Signed-off-by: Harsh Prateek Bora <harsh@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

A patch was accepted recently for sending correct buffer size to p9stat_read.
We need a similar patch in v9fs_dir_readdir_dotl to send correct end of buffer
to p9dirent_read.
Signed-off-by: Sripathi Kodi <sripathik@in.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

Current 9p client file write code does not check for RLIMIT_FSIZE resource.
This bug was found by running LTP test case for setrlimit. This bug is fixed
by calling generic_write_checks before sending the write request to the
server.
Without this patch: the write function is allowed to write above the
RLIMIT_FSIZE set by user.
With this patch: the write function checks for RLIMIT_SIZE and writes upto
the size limit.
Signed-off-by: Harsh Prateek Bora <harsh@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

git_t is unsigned an can never be less than zero.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

* 'upstream-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (50 commits)
  ext4,jbd2: convert tracepoints to use major/minor numbers
  ext4: optimize orphan_list handling for ext4_setattr
  ext4: fix unbalanced mutex unlock in error path of ext4_li_request_new
  ext4: fix compile error in ext4_fallocate()
  ext4: move ext4_mb_{get,put}_buddy_cache_lock and make them static
  ext4: rename mark_bitmap_end() to ext4_mark_bitmap_end()
  ext4: move flush_completed_IO to fs/ext4/fsync.c and make it static
  ext4: rename {ext,idx}_pblock and inline small extent functions
  ext4: make various ext4 functions be static
  ext4: rename {exit,init}_ext4_*() to ext4_{exit,init}_*()
  ext4: fix kernel oops if the journal superblock has a non-zero j_errno
  ext4: update writeback_index based on last page scanned
  ext4: implement writeback livelock avoidance using page tagging
  ext4: tidy up a void argument in inode.c
  ext4: add batched_discard into ext4 feature list
  ext4: Add batched discard support for ext4
  fs: Add FITRIM ioctl
  ext4: Use return value from sb_issue_discard()
  ext4: Check return value of sb_getblk() and friends
  ext4: use bio layer instead of buffer layer in mpage_da_submit_io
  ...

Conflicts:
	fs/ext4/inode.c
	fs/ext4/mballoc.c
	include/trace/events/ext4.h

* 'drm-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/radeon/kms: enable unmappable vram for evergreen
  drm/radeon/kms: fix tiled db height calculation on 6xx/7xx
  drm/radeon/kms: fix handling of tex lookup disable in cs checker on r2xx

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6: (24 commits)
  quota: Fix possible oops in __dquot_initialize()
  ext3: Update kernel-doc comments
  jbd/2: fixed typos
  ext2: fixed typo.
  ext3: Fix debug messages in ext3_group_extend()
  jbd: Convert atomic_inc() to get_bh()
  ext3: Remove misplaced BUFFER_TRACE() in ext3_truncate()
  jbd: Fix debug message in do_get_write_access()
  jbd: Check return value of __getblk()
  ext3: Use DIV_ROUND_UP() on group desc block counting
  ext3: Return proper error code on ext3_fill_super()
  ext3: Remove unnecessary casts on bh->b_data
  ext3: Cleanup ext3_setup_super()
  quota: Fix issuing of warnings from dquot_transfer
  quota: fix dquot_disable vs dquot_transfer race v2
  jbd: Convert bitops to buffer fns
  ext3/jbd: Avoid WARN() messages when failing to write the superblock
  jbd: Use offset_in_page() instead of manual calculation
  jbd: Remove unnecessary goto statement
  jbd: Use printk_ratelimited() in journal_alloc_journal_head()
  ...

Unfortunately perf can't deal with anything other than direct structure
accesses in the TP_printk() section.  It will drop dead when it sees
jbd2_dev_to_name() in the "print fmt" section of the tracepoint.

Addresses-Google-Bug: 3138508
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

Surprisingly chown() on ext4 is not SMP scalable operation. 
Due to unconditional orphan_del(NULL, inode) in ext4_setattr()
result in significant performance overhead because of global orphan
mutex, especially in no-journal mode (where orphan_add() is noop).
It is possible to skip explicit orphan_del if possible.
Results of fchown() micro-benchmark in no-journal mode
while (1) {
   iteration++;
   fchown(fd, uid, gid);
   fchown(fd, uid + 1, gid + 1)
}
measured: iterations per millisecond
| nr_tasks | w/o patch | with patch |
|        1 |       142 |        185 |
|        4 |       109 |        642 |
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

Signed-off-by: Nicolas Kaiser <nikai@nikai.net>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: (48 commits)
  DMAENGINE: move COH901318 to arch_initcall
  dma: imx-dma: fix signedness bug
  dma/timberdale: simplify conditional
  ste_dma40: remove channel_type
  ste_dma40: remove enum for endianess
  ste_dma40: remove TIM_FOR_LINK option
  ste_dma40: move mode_opt to separate config
  ste_dma40: move channel mode to a separate field
  ste_dma40: move priority to separate field
  ste_dma40: add variable to indicate valid dma_cfg
  async_tx: make async_tx channel switching opt-in
  move async raid6 test to lib/Kconfig.debug
  dmaengine: Add Freescale i.MX1/21/27 DMA driver
  intel_mid_dma: change the slave interface
  intel_mid_dma: fix the WARN_ONs
  intel_mid_dma: Add sg list support to DMA driver
  intel_mid_dma: Allow DMAC2 to share interrupt
  intel_mid_dma: Allow IRQ sharing
  intel_mid_dma: Add runtime PM support
  DMAENGINE: define a dummy filter function for ste_dma40
  ...

* 'viafb-next' of git://github.com/schandinat/linux-2.6: (29 commits)
  viafb: add initial VX900 support
  viafb: fix hardware acceleration for suspend & resume
  viafb: make suspend and resume work (on all machines?)
  viafb: restore display on resume
  Minimal support for viafb suspend/resume
  viafb: use proper register for colour when doing fill ops
  viafb: add documentation for proc interface
  viafb: rename output devices
  viafb: add a mapping of supported output devices
  viafb: set sync polarity for all output devices
  viafb: add function to change sync polarity per device
  viafb: reduce I2C timeout and delay
  viafb: enable I2C for CRT
  viafb: fix i2c_transfer error handling
  viafb: vt1636 cleanup
  viafb: introduce per output device power management
  viafb: limit LCD code impact
  viafb: add interface for output device configuration
  viafb: merge the remaining output path with enable functions
  viafb: use new device routing
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-mn10300: (44 commits)
  MN10300: Save frame pointer in thread_info struct rather than global var
  MN10300: Change "Matsushita" to "Panasonic".
  MN10300: Create a defconfig for the ASB2364 board
  MN10300: Update the ASB2303 defconfig
  MN10300: ASB2364: Add support for SMSC911X and SMC911X
  MN10300: ASB2364: Handle the IRQ multiplexer in the FPGA
  MN10300: Generic time support
  MN10300: Specify an ELF HWCAP flag for MN10300 Atomic Operations Unit support
  MN10300: Map userspace atomic op regs as a vmalloc page
  MN10300: And Panasonic AM34 subarch and implement SMP
  MN10300: Delete idle_timestamp from irq_cpustat_t
  MN10300: Make various interrupt priority settings configurable
  MN10300: Optimise do_csum()
  MN10300: Implement atomic ops using atomic ops unit
  MN10300: Make the FPU operate in non-lazy mode under SMP
  MN10300: SMP TLB flushing
  MN10300: Use the [ID]PTEL2 registers rather than [ID]PTEL for TLB control
  MN10300: Make the use of PIDR to mark TLB entries controllable
  MN10300: Rename __flush_tlb*() to local_flush_tlb*()
  MN10300: AM34 erratum requires MMUCTR read and write on exception entry
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: usb-audio: automatically detect feedback format
  ASoC: sound/wm9090: add missing __devexit marker
  ASoC: sound/max98088: add missing __devexit marker
  ASoC: sound/ad73311: add missing __devexit marker
  ASoC: fsl - fix build error in pcm030-audio-fabric.c
  sound/oss/sb_ess.c: delete double assignment
  ALSA: hda - Change BTL amp level on some HP notebooks

Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (50 commits)
  perf python scripting: Add futex-contention script
  perf python scripting: Fixup cut'n'paste error in sctop script
  perf scripting: Shut up 'perf record' final status
  perf record: Remove newline character from perror() argument
  perf python scripting: Support fedora 11 (audit 1.7.17)
  perf python scripting: Improve the syscalls-by-pid script
  perf python scripting: print the syscall name on sctop
  perf python scripting: Improve the syscalls-counts script
  perf python scripting: Improve the failed-syscalls-by-pid script
  kprobes: Remove redundant text_mutex lock in optimize
  x86/oprofile: Fix uninitialized variable use in debug printk
  tracing: Fix 'faild' -> 'failed' typo
  perf probe: Fix format specified for Dwarf_Off parameter
  perf trace: Fix detection of script extension
  perf trace: Use $PERF_EXEC_PATH in canned report scripts
  perf tools: Document event modifiers
  perf tools: Remove direct slang.h include
  perf_events: Fix for transaction recovery in group_sched_in()
  perf_events: Revert: Fix transaction recovery in group_sched_in()
  perf, x86: Use NUMA aware allocations for PEBS/BTS/DS allocations
  ...

* 'module' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
  NULL-terminate all pci_device_id tables
  (trivial) Fix compiler warning in kernel/modules.c

* akpm-incoming-2: (139 commits)
  epoll: make epoll_wait() use the hrtimer range feature
  select: rename estimate_accuracy() to select_estimate_accuracy()
  Remove duplicate includes from many files
  ramoops: use the platform data structure instead of module params
  kernel/resource.c: handle reinsertion of an already-inserted resource
  kfifo: fix kfifo_alloc() to return a signed int value
  w1: don't allow arbitrary users to remove w1 devices
  alpha: remove dma64_addr_t usage
  mips: remove dma64_addr_t usage
  sparc: remove dma64_addr_t usage
  fuse: use release_pages()
  taskstats: use real microsecond granularity for CPU times
  taskstats: split fill_pid function
  taskstats: separate taskstats commands
  delayacct: align to 8 byte boundary on 64-bit systems
  delay-accounting: reimplement -c for getdelays.c to report information on a target command
  namespaces Kconfig: move namespace menu location after the cgroup
  namespaces Kconfig: remove the cgroup device whitelist experimental tag
  namespaces Kconfig: remove pointless cgroup dependency
  namespaces Kconfig: make namespace a submenu
  ...

Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  percpu: Remove the multi-page alignment facility
  x86-32: Allocate irq stacks seperate from percpu area
  x86-32, mm: Remove duplicated #include
  x86, printk: Get rid of <0> from stack output
  x86, kexec: Make sure to stop all CPUs before exiting the kernel
  x86/vsmp: Eliminate kconfig dependency warning

The BKL was pushed into this function when it was converted to use the
unlocked_ioctl interface, but nothing that the function touches is
actually protected by the BKL.  So just remove the BKL entirely, so that
we finally can get a realistic system build without the BKL being
enabled at all.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When I compiled 2.6.36-rc3 kernel with EXT4FS_DEBUG definition, I got
the following compile error.

  CC [M]  fs/ext4/extents.o
fs/ext4/extents.c: In function 'ext4_fallocate':
fs/ext4/extents.c:3772: error: 'block' undeclared (first use in this function)
fs/ext4/extents.c:3772: error: (Each undeclared identifier is reported only once
fs/ext4/extents.c:3772: error: for each function it appears in.)
make[2]: *** [fs/ext4/extents.o] Error 1

The patch fixes this problem.
Signed-off-by: Kazuya Mio <k-mio@sx.jp.nec.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

These functions are only used within fs/ext4/mballoc.c, so move them
so they are used after they are defined, and then make them be static.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

Fix a namespace leak from fs/ext4
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

Fix a namespace leak by moving the function to the file where it is
used and making it static.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>