This patch adds driver changes for capturing the link change count in
ethtool statistics display.

Please consider applying this to "net-next".
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Ariel Elior <ariel.elior@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
mlx5e-updates-2018-05-29

This series includes mlx5 FPGA and mlx5e netdevice updates:

1) Print FPGA info such as device name, vendor id, etc.., from Ilan Tayari.
2) Abort FPGA if some essential capabilities are not supported, from Yevgeny Kliteynik.
3) Two FPGA dma related minor fixes, from Ilya Lesokhin.
4) Use the right table to report offloaded TC rules, from Or Gerlitz.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Checking netif_xmit_frozen_or_stopped() at the end of sch_direct_xmit()
is being bypassed. This is because "ret" from sch_direct_xmit() will be
either NETDEV_TX_OK or NETDEV_TX_BUSY, and only ret == NETDEV_TX_OK == 0
will reach the condition:

    if (ret && netif_xmit_frozen_or_stopped(txq))
        return false;

This patch cleans up the code by removing the whole condition.

For more discussion about this, please refer to
   https://marc.info/?t=152727195700008Signed-off-by: Song Liu <songliubraving@fb.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

This is additional to the
commit ea1627c2 ("tcp: minor optimizations around tcp_hdr() usage").
At this point, skb->data is same with tcp_hdr() as tcp header has not
been pulled yet. So use the less expensive one to get the tcp header.

Remove the third parameter of tcp_rcv_established() and put it into
the function body.

Furthermore, the local variables are listed as a reverse christmas tree :)

Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Added myself as maintainer for QorIQ PTP clock driver.
Since gianfar_ptp.c was renamed to ptp_qoriq.c, let's
maintain it under QorIQ PTP clock driver.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove and coalesce formats when there is an unnecessary
character after a logging newline.  These extra characters
cause logging defects.

Miscellanea:

o Coalesce formats
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Test-building this driver on targets without CONFIG_OF revealed a build
failure:

drivers/net/ethernet/ti/davinci_mdio.c: In function 'davinci_mdio_probe':
drivers/net/ethernet/ti/davinci_mdio.c:380:9: error: implicit declaration of function 'davinci_mdio_probe_dt'; did you mean 'davinci_mdio_probe'? [-Werror=implicit-function-declaration]

This adjusts the #ifdef logic in the driver to make it build in
all configurations.

Fixes: 2652113f ("net: ethernet: ti: Allow most drivers with COMPILE_TEST")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

While compile-testing on arm64 with gcc-8.1, I ran into a build diagnostic:

drivers/net/ethernet/freescale/fec_main.c: In function 'fec_probe':
drivers/net/ethernet/freescale/fec_main.c:3517:25: error: '%d' directive writing between 1 and 10 bytes into a region of size 5 [-Werror=format-overflow=]
   sprintf(irq_name, "int%d", i);
                         ^~
drivers/net/ethernet/freescale/fec_main.c:3517:21: note: directive argument in the range [0, 2147483646]
   sprintf(irq_name, "int%d", i);
                     ^~~~~~~
drivers/net/ethernet/freescale/fec_main.c:3517:3: note: 'sprintf' output between 5 and 14 bytes into a destination of size 8
   sprintf(irq_name, "int%d", i);
   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~

It appears this has never shown on ppc32 or arm32 for an unknown reason, but
now gcc fails to identify that the 'irq_cnt' loop index has an upper bound
of 3, and instead uses a bogus range.

To work around the warning, this changes the sprintf to snprintf with the
correct buffer length.

Fixes: 78cc6e7e ("net: ethernet: freescale: Allow FEC with COMPILE_TEST")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

As we keep the offloaded TC rules for NIC and e-switch in two different
places, make sure to return the number of offloaded flows according
to the use-case and not blindly from the priv.

Fixes: 655dc3d2 ('net/mlx5e: Use shared table for offloaded TC eswitch flows')
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reported-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Paul Blakey <paulb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

When mlx5_fpga_conn_unmap_buf is called buf->sg[0].size
should equal the actual buffer size, not the message size.
Otherwise we will trigger the following dma debug warning
"DMA-API: device driver frees DMA memory with different size"

Fixes: 537a5057 ('net/mlx5: FPGA, Add high-speed connection routines')
Signed-off-by: Ilya Lesokhin <ilyal@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Properly initialize dma direction on fpga conn send.
Do not rely on dma_dir == 0 (DMA_BIDIRECTIONAL).
Signed-off-by: Ilya Lesokhin <ilyal@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

In the case that the reported max number of QPs capability
equals to zero, abort FPGA init.
Signed-off-by: Yevgeny Kliteynik <kliteyn@mellanox.com>
Signed-off-by: Adi Nissim <adin@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Add print of the following values on init:
1. ieee vendor id
2. sandbox product id
3. sandbox product version
Signed-off-by: Ilan Tayari <ilant@mellanox.com>
Signed-off-by: Adi Nissim <adin@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Add device name for Mellanox FPGA devices.
Signed-off-by: Ilan Tayari <ilant@mellanox.com>
Signed-off-by: Adi Nissim <adin@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Add doxygen comments for enum mlx5_fpga_access_type.
Signed-off-by: Ilan Tayari <ilant@mellanox.com>
Signed-off-by: Adi Nissim <adin@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

gcc-7.3.0 report following err:

  HOSTCC  net/bpfilter/main.o
In file included from net/bpfilter/main.c:9:0:
./include/uapi/linux/bpf.h:12:10: fatal error: linux/bpf_common.h: No such file or directory
 #include <linux/bpf_common.h>

remove it by adding a include path.
Fixes: d2ba09c1 ("net: add skeleton of bpfilter kernel module")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

skb->len is meaningless to user.
data length could be more helpful, with which we can easily filter out
the packet without payload.
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Atul Gupta <atul.gupta@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

- unindented continue
- check for null page
- signed return
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Atul Gupta <atul.gupta@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

skb dereferenced before check in sendpage
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Atul Gupta <atul.gupta@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

address suspicious code <gustavo@embeddedor.com>

1210       set_bit(SOCK_NOSPACE, &sk->sk_socket->flags);
1211       }

The issue is that in the code above, set_bit is never reached
due to the 'continue' statement at line 1208.

Also reported by bug report:<dan.carpenter@oracle.com>
1210       set_bit(SOCK_NOSPACE, &sk->sk_socket->flags);
           ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Not reachable.

Its required to wait for buffer in the send path and takes care of
unaddress and un-handled SOCK_NOSPACE.

v2: use csk_mem_free where appropriate
    proper indent of goto do_nonblock
    replace out with do_rm_wq
Reported-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Atul Gupta <atul.gupta@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

corrected the key length to copy 128b key. Removed 192b and 256b
key as user input supports key of size 128b in gcm_ctx
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Atul Gupta <atul.gupta@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

David Ahern says:

====================
net: Add address attribute to control metric of prefix route

For use cases such as VRR (Virtual Router Redundancy) interface managers
want efficient control over the order of prefix routes when multiple
interfaces have addresses with overlapping/duplicate subnets.

Currently, if two interfaces have addresses in the same subnet, the order
of the prefix route entries is determined by the order in which the
addresses are assigned or the links brought up. Any actions like cycling
an interface up and down changes that order. This set adds a new attribute
for addresses to allow a user to specify the metric of the prefix route
associated with an address giving interface managers better and more
efficient control of the order of prefix routes.

Patches 1-3 refactor IPv6 address add functions to pass an ifa6_config
struct. The functions currently have a long list of arguments and adding
the metric just makes it worse. Because of the overall diff size in
moving the arguments to a struct, the change is done in stages to make
it easier to review starting with the bottom function and pushing the
struct up to callers in each successive patch.

Patch 4 introduces the new attribute.

Patches 5 and 6 add support for the new attribute to IPv4 and IPv6
addresses.

Patch 7 adds a set of test cases.

Patch 8 adds support to iproute2

Changes since RFC
- collapsed patches 1 and 3 into patch 2
- simplified stack variables in fib_modify_prefix_metric in patch 5
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Add tests verifying prefix routes are inserted with expected metric.

IPv6 prefix route tests
    TEST: Default metric                                      [ OK ]
    TEST: User specified metric on first device               [ OK ]
    TEST: User specified metric on second device              [ OK ]
    TEST: Delete of address on first device                   [ OK ]
    TEST: Modify metric of address                            [ OK ]
    TEST: Prefix route removed on link down                   [ OK ]
    TEST: Prefix route with metric on link up                 [ OK ]

IPv4 prefix route tests
    TEST: Default metric                                      [ OK ]
    TEST: User specified metric on first device               [ OK ]
    TEST: User specified metric on second device              [ OK ]
    TEST: Delete of address on first device                   [ OK ]
    TEST: Modify metric of address                            [ OK ]
    TEST: Prefix route removed on link down                   [ OK ]
    TEST: Prefix route with metric on link up                 [ OK ]
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for IFA_RT_PRIORITY to ipv6 addresses.

If the metric is changed on an existing address then the new route
is inserted before removing the old one. Since the metric is one
of the route keys, the prefix route can not be atomically replaced.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for IFA_RT_PRIORITY to ipv4 addresses.

If the metric is changed on an existing address then the new route
is inserted before removing the old one. Since the metric is one
of the route keys, the prefix route can not be replaced.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, if two interfaces have addresses in the same connected route,
then the order of the prefix route entries is determined by the order in
which the addresses are assigned or the links brought up.

Add IFA_RT_PRIORITY to allow user to specify the metric of the prefix
route associated with an address giving interface managers better
control of the order of prefix routes.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Update inet6_addr_modify to take ifa6_config argument versus a parameter
list. This is an argument move only; no functional change intended.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move the creation of struct ifa6_config up to callers of inet6_addr_add.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move config parameters for adding an ipv6 address to a struct. struct
names stem from inet6_rtm_newaddr which is the modern handler for
adding an address.

Start the conversion to ifa6_config with ipv6_add_addr. This is an argument
move only; no functional change intended. Mapping of variable changes:

    addr      -->  cfg->pfx
    peer_addr -->  cfg->peer_pfx
    pfxlen    -->  cfg->plen
    flags     -->  cfg->ifa_flags

scope, valid_lft, prefered_lft have the same names within cfg
(with corrected spelling).
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ido Schimmel says:

====================
mlxsw: use MRSR register for FW reset

Jiri says:

Introduce a MRSR register definition and use it to do FW reset instead
of existing mechanism using PCI BAR0 register.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

So far, the PCI BAR0 register is used for triggering FW reset. However,
that is a legacy attitude and it is recommended to use MRSR to perform
reset instead. So do that. Move the reset into init() function as
the cmd interface needs to be used. With that, IRQ initialization needs
to be moved as well. As a side effect, the reset move simplifies
the devlink reload flow.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is an exception in command interface processing in case the MRSR
register is written to. The register triggers FW reset and during the
reset FW returns an error. So handle this by ignoring this error while
writing to MRSR register.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit "net: qcom/emac: Encapsulate sgmii ops under one structure"
introduced the sgmii_ops structure, but did not correctly initialize
it on device tree platforms.  This resulted in compiler warnings when
ACPI is not enabled.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Timur Tabi <timur@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

With CONFIG_TLS=m and MLX5_CORE_EN=y, we get a link failure:

drivers/net/ethernet/mellanox/mlx5/core/en_accel/tls_rxtx.o: In function `mlx5e_tls_handle_ooo':
tls_rxtx.c:(.text+0x24c): undefined reference to `tls_get_record'
drivers/net/ethernet/mellanox/mlx5/core/en_accel/tls_rxtx.o: In function `mlx5e_tls_handle_tx_skb':
tls_rxtx.c:(.text+0x9a8): undefined reference to `tls_device_sk_destruct'

This narrows down the dependency to only allow the configurations
that will actually work. The existing dependency on TLS_DEVICE is
not sufficient here since MLX5_EN_TLS is a 'bool' symbol.

Fixes: c83294b9 ("net/mlx5e: TLS, Add Innova TLS TX support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
Acked-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

the message be freed immediately, no need to trim it
back to the previous size.

Inspired by commit 7a9b3ec1 ("nl80211: remove unnecessary genlmsg_cancel() calls")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fixes the following sparse warnings:

net/ipv4/bpfilter/sockopt.c:13:5: warning:
 symbol 'bpfilter_mbox_request' was not declared. Should it be static?
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jakub Kicinski says:

====================
nfp: abm: RED/MQ qdisc offload

This is second batch of advanced buffer management nfp driver
changes.  This series adds the qdisc offload.  Support for
a very simple subset of RED qdisc offload is added as needed
for DCTCP ECN marking (min and max thresholds set to the same
value).

The first two patches fix glitches introduced by the previous
series.  We have to be careful about phys_port_name handling,
because VFs share the same code path, and some user space may
get confused by the names we chose.

Since unlike previous offloads we can report the queue backlog
both in bytes and packets we need to adjust how statistics are
added up in the core (patch 6).

There are some extra statistics we want to expose which don't
fit into TC stats, namely counts of packets which have been fast-
-forwarded without getting enqueued because there was no
contention and number of packets that were ever queued (sum of
all momentary backlogs).  We expose those through ethtool stats
(patches 8 and 9).

Remaining 5 patches add MQ offload - to be able to set different
configurations on different queues.  Representors are made multi-
-queue and we add offload support to MQ.  MQ stats are added up
before calling ->dump qdiscs on the children, and therefore don't
include updated offload values.  To avoid clearly incorrect stats
MQ is made to also request stats update from offloads.  This way
we can correct the diff at the driver level.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Report the stat diff to make sure MQ stats add up to child stats.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>