- 09 Nov, 2017 2 commits
-
-
Eric Anholt authored
Peter Robinson reported issues on Fedora with 4k monitors not having their modes filtered down to 1920x1080 on Raspberry Pi. v2: Fix vc5 typo in place of vc4. Cc: Peter Robinson <pbrobinson@redhat.com> Signed-off-by:
Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20170920225935.14566-1-eric@anholt.net Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> (v1)
-
Daniel Vetter authored
Point at the equivalent atomic state and explain that atomic drivers shouldn't really depend upon legacy state. Motivated by questions from Manasi about how this all is supposed to work. Cc: Manasi Navare <manasi.d.navare@intel.com> Reviewed-by:
Manasi Navare <manasi.d.navare@intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171108203007.12274-1-daniel.vetter@ffwll.ch
-
- 08 Nov, 2017 3 commits
-
-
Benjamin Gaignard authored
vtg_remove does nothing just remove it Acked-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Benjamin Gaignard <benjamin.gaignard@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/1510146367-25329-1-git-send-email-benjamin.gaignard@linaro.org
-
Benjamin Gaignard authored
Drivers are registered on platform bus so the private list could be replace by a call to of_find_device_by_node(). Changing this also makes dev, np and link fields useless in vtg structure. Acked-by:
-
Maarten Lankhorst authored
This introduces a slight behavioral change to rmfb. Instead of disabling a crtc when the primary plane is disabled, we try to preserve it. Apart from old versions of the vmwgfx xorg driver, there is nothing depending on rmfb disabling a crtc. Vmwgfx' and simple kms helper atomic implementation rejects CRTC enabled without plane, so we can do this safely. If the atomic commit is rejected by the driver then we will still fall back to the old behavior and turn off the crtc. Changes since v1: - Restart completely when rmfb with crtc on fails (Sean Paul). Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@ubuntu.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171101150433.10777-1-maarten.lankhorst@linux.intel.comReviewed-by:
-
- 07 Nov, 2017 11 commits
-
-
Jani Nikula authored
This is no longer needed outside of drm_edid.c. Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Acked-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/9c0be7b97d0144ed0419c87ac42b30f5835ca7e6.1509545641.git.jani.nikula@intel.com
-
Jani Nikula authored
drm_add_edid_modes() now fills in the ELD automatically, so the calls to drm_edid_to_eld() are redundant. Remove them. All the other places are obvious, but nv50 has detached drm_edid_to_eld() from the drm_add_edid_modes() call. Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Archit Taneja <architt@codeaurora.org> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Russell King <linux@armlinux.org.uk> Cc: CK Hu <ck.hu@mediatek.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Mark Yao <mark.yao@rock-chips.com> Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Vincent Abriou <vincent.abriou@st.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Eric Anholt <eric@anholt.net> Acked-by:
Archit Taneja <architt@codeaurora.org> Reviewed-by:
-
Jani Nikula authored
Call drm_edid_to_eld() from drm_add_edid_modes() to fill in the ELD automatically. There's no harm in doing this for connectors that do not support audio. Reviewed-by:
-
Jani Nikula authored
Preparation for future work. No functional changes. Reviewed-by:
-
Jani Nikula authored
Since drm_edid_to_eld() knows the connector type, we can set the type in ELD while at it. Most connectors this gets called on are not DP encoders, and with the HDMI type being 0, this does not change behaviour for non-DP. For i915 having this in place earlier would have saved a considerable amount of debugging that lead to the fix 2d8f6329 ("drm/i915: always update ELD connector type after get modes"). I don't see other drivers, even the ones calling drm_edid_to_eld() on DP connectors, setting the connector type in ELD. Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Archit Taneja <architt@codeaurora.org> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Russell King <linux@armlinux.org.uk> Cc: CK Hu <ck.hu@mediatek.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Mark Yao <mark.yao@rock-chips.com> Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Vincent Abriou <vincent.abriou@st.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Eric Anholt <eric@anholt.net> Reviewed-by:
-
Jani Nikula authored
We have the macros, use them. No functional changes. Reviewed-by:
-
Chris Wilson authored
kbuilder has begun running the selftests and reported a soft-lockup inside __igt_insert(), so break up the test loop over different modes with another call to cond_resched(). Reported-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by:
-
Philippe CORNU authored
ltdc can have up to 2 endpoints: - dpi external gpios: for rgb panels or external bridge ICs. - dpi internal ios: connected internally to dsi. Note: Refer to the reference manual to know if the dsi is present on your device. Signed-off-by:
Philippe Cornu <philippe.cornu@st.com> Signed-off-by:
-
Philippe CORNU authored
ltdc can have up to 2 endpoints: - dpi external gpios: for rgb panels or external bridge ICs. - dpi internal ios: connected internally to dsi. Note: Refer to the reference manual to know if the dsi is present on your device. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Philippe CORNU authored
Minor fixes detected with "scripts/checkpatch.pl --strict" Signed-off-by:
Gustavo Padovan <gustavo.padovan@collabora.com> Signed-off-by:
-
Philippe CORNU authored
Rename the driver name from "dw_mipi_dsi-stm" to "stm32-display-dsi" for a better readability in /sys/bus/platform/drivers entries. Signed-off-by:
-
- 06 Nov, 2017 1 commit
-
-
Arnd Bergmann authored
We want to remove uses of do_gettimeofday() from the kernel since the resulting timeval structure overflows in 2038. This is not a problem for this particular use, but do_gettimeofday() is also not an appropriate method for measuring time intervals, since it requires a conversion into microseconds and is complicated to work with. ktime_get() is a better replacement, as it works with the monontonic kernel timebase and requires a minimum of computation. I'm slightly changing the output from microseconds to nanoseconds here, to avoid introducing a new division operation. This should be fine since the value is only used for debugging. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
- 02 Nov, 2017 6 commits
-
-
Ville Syrjälä authored
When debugging bad plane source coordinates it helps to have an idea of what the framebuffer dimensions are. Signed-off-by:
-
Liviu Dudau authored
drm_mm_insert_node_generic() is a simplified version of drm_mm_insert_node_in_range(), update comment to reflect correct function name. Signed-off-by:
Liviu Dudau <liviu.dudau@arm.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Liviu Dudau authored
Mappings need to be unmapped by calling dma_buf_unmap_attachment() and not by calling again dma_buf_map_attachment(). Also fix some spelling mistakes. Signed-off-by:
-
Liviu Dudau authored
Minor spelling fix for 'monster' and replace 'on' with 'own' in comments. Signed-off-by:
-
Boris BREZILLON authored
vc4->purgeable.size and vc4->purgeable.purged_size are size_t fields and should be printed with a %zd specifier. Fixes: b9f19259 ("drm/vc4: Add the DRM_IOCTL_VC4_GEM_MADVISE ioctl") Signed-off-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Reviewed-by:
-
Liviu Dudau authored
Commit db2395eci ("drm: Convert drm_vma_manager to embedded interval-tree in drm_mm") removed a line in drm_vma_offset_add() function that makes checking the result of calling drm_mm_insert_node() and the goto call redundant. Rework the function (as suggested by Chris Wilson) to eliminate the need for the goto and associated label. v2: rewrite function to remove all goto statements. Fixes: db2395eci ("drm: Convert drm_vma_manager to embedded interval-tree in drm_mm") Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
- 31 Oct, 2017 6 commits
-
-
Noralf Trønnes authored
This adds helpers for the drm_driver->last_close and the drm_mode_config_funcs->output_poll_changed callbacks. Signed-off-by:
Noralf Trønnes <noralf@tronnes.org> Reviewed-by:
-
Noralf Trønnes authored
drm_fb_helper is *the* way of doing fbdev emulation so add a pointer to struct drm_device. This makes it possible to add callback helpers for .last_close and .output_poll_changed further reducing fbdev emulation footprint in drivers. The pointer is set by drm_fb_helper_init() and cleared by drm_fb_helper_fini(). Signed-off-by:
-
Noralf Trønnes authored
Make functions tolerate that the drm_fb_helper argument is NULL. This is useful for drivers that continue probing when fbdev emulation fails and not having to do this check themselves. Update docs for functions that already handles this. Signed-off-by:
-
Daniel Vetter authored
Gustavo volunteered to become a drm-misc co-maintainer, he'll take care of 4.16 to get started. Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Dave Airlie <airlied@redhat.com> Acked-by:
Sean Paul <seanpaul@chromium.org> Acked-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Daniel Vetter authored
Not everyone agrees this is the best thing, so make it really clear that maintainers need to be asked first, then the conversion. We've had a few newbies that did this the other way round, got their patches rejected, which isn't the best newbie experience. Cc: Sean Paul <seanpaul@chromium.org> Acked-by:
-
Kees Cook authored
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Cc: David Airlie <airlied@linux.ie> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
- 30 Oct, 2017 5 commits
-
-
Dan Carpenter authored
There is one caller which checks whether rpi_touchscreen_i2c_read() returns negative error codes. Currently it can't because negative error codes are truncated to u8, but that's easy to fix if we change the type to int. Fixes: 2f733d61 ("drm/panel: Add support for the Raspberry Pi 7" Touchscreen.") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Kees Cook authored
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: Eric Anholt <eric@anholt.net> Cc: David Airlie <airlied@linux.ie> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
-
Chris Wilson authored
pr_debug() is conditionally compiled and requires either dynamic-debugging to be enabled or for the code to opt-in using #define DEBUG. Since drm_print provides a central debugging facility using pr_debug(), make sure it will always produce output. Signed-off-by:
-
Pan Bian authored
The function kunmap_atomatic() is called on the same variable twice, i.e. pt->v. In the second call, its parameter should be variable v rather than pt->v. Signed-off-by:
Pan Bian <bianpan2016@163.com> Signed-off-by:
-
Aastha Gupta authored
DRM core uses reference/unreference suffixes for refcounting functions, but kernel uses get/put (e.g. kref_get/put()). Replace reference/unreference with get/put for consistency and also it's shorter. The following cocci script was used to generate the patch: @@ expression e; @@ ( -drm_gem_object_reference(e); +drm_gem_object_get(e); | -drm_gem_object_unreference(e); +drm_gem_object_put(e); | -drm_gem_object_unreference_unlocked(e); +drm_gem_object_put_unlocked(e); ) Signed-off-by:
Aastha Gupta <aastha.gupta4104@gmail.com> Signed-off-by:
-
- 27 Oct, 2017 2 commits
-
-
Noralf Trønnes authored
Remove two trailing spaces. Signed-off-by:
-
Dhinakaran Pandiyan authored
DPCD 600h - SET_POWER & SET_DP_PWR_VOLTAGE defines power state 101 = Set Main-Link for local Sink device and all downstream Sink devices to D3 (power-down mode), keep AUX block fully powered, ready to reply within a Response Timeout period of 300us. This state is useful in a MST dock + MST monitor configuration that doesn't wake up from D3 state. v2: Use spaces instead of tabs (Jani) Reviewed-by:
Harry Wentland <harry.wentland@amd.com> Signed-off-by:
Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by:
-
- 21 Oct, 2017 1 commit
-
-
Harsha Sharma authored
Replace use of list_for_each with list_for_each_entry to simplify the code and remove variables that are used only in list_for_each. Done with following coccinelle patch: @r@ identifier fn,i,f,p; expression e; iterator name list_for_each, list_for_each_entry; type T; @@ fn(...) { ++ T *i; <+... - list_for_each(p,e) + list_for_each_entry(i,e,f) { ... - T *i = list_entry(p,T,f); ... } ...+> } @@ identifier r.fn,r.p; @@ fn(...) { ... - struct list_head *p; ... when != p } @@ identifier r.fn,r.i,r.f; expression r.e; statement S; @@ fn(...) { <... list_for_each_entry(i,e,f) - { S - } ...> } @s@ identifier i,f,p; expression e; type T; @@ - list_for_each(p,e) + list_for_each_entry(i,e,f) { ... when != T *i; - i = list_entry(p,T,f); ... } @@ identifier s.p; @@ - struct list_head *p; ... when != p @@ identifier s.i,s.f; expression s.e; statement S; @@ list_for_each_entry(i,e,f) - { S - } Signed-off-by:Harsha Sharma <harshasharmaiitr@gmail.com> Reviewed-by:
-
- 20 Oct, 2017 3 commits
-
-
Sean Paul authored
I didn't catch this before applying, just right after (of course). Fixes: ../drivers/gpu/drm/rockchip/analogix_dp-rockchip.c: In function ‘rockchip_dp_of_probe’: ../drivers/gpu/drm/rockchip/analogix_dp-rockchip.c:276:6: warning: unused variable ‘ret’ [-Wunused-variable] int ret; ^~~ Fixes: 102712a3 ("drm/rockchip: analogix_dp: Remove unnecessary init code") Cc: Jeffy Chen <jeffy.chen@rock-chips.com> Cc: Mark Yao <mark.yao@rock-chips.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: Heiko Stuebner <heiko@sntech.de> Cc: dri-devel@lists.freedesktop.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-rockchip@lists.infradead.org Acked-by: -
Haneen Mohammed authored
Remove old comment style used by doxygen. And remove comment left from commit 99cdb35e ("drm/doc: move printf helpers out of drmP.h") after refactoring drmP.h. Signed-off-by:
Haneen Mohammed <hamohammed.sa@gmail.com> Signed-off-by:
-
Haneen Mohammed authored
This patch extract DRM_* debug macros from drmP.h to drm_print.h and move printing related functions used by these macros from drm_drv.[hc] to drm_print.[hc]. Signed-off-by:
-
